aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: harmonize Netgear R6120 DT LED node namesAlex Lewontin2020-04-061-3/+3
| | | | | | | | | This changes the node names for the LEDs in the Netgear R6120 device-tree file to provide consistency with other devices. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: netdev: add missing config for mlx5 driverTan Zien2020-04-061-3/+12
| | | | | | | | | | | The mlk5 kmod lacks all necessary build symbols for kernel 4.14 (again). Add missing symbols to avoid build failure on these targets. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rewrite commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for TP-Link TL-MR3420 v3Lim Guo Wei2020-04-064-10/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the TP-Link TL-MR3420 v3, a later revision of the v2 with an external gpiochip similar to TP-Link Archer C7 v4. Specifications: SOC: Qualcomm Atheros QCA9531 CPU: 650MHz Flash: 4 MiB RAM: 32 MiB WLAN: Qualcomm Atheros QCA9531 bgn 2T2R 2.4 GHz Ethernet: 5 ports (100M) Flashing instructions: - Flash factory image from OEM WebUI: openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-factory.bin - Sysupgrade from ath79 image: openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-sysupgrade.bin Signed-off-by: Lim Guo Wei <limguowei@gmail.com> [remove SUPPORTED devices, some typo adjustments, fix WAN MAC address, fix sorting in 01_leds] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dnsmasq: bump to 2.81rc5Kevin Darbyshire-Bryant2020-04-063-67/+181
| | | | | | | | | | | | | | | | | | | | Bump to 2.81rc5 and re-work ipset-remove-old-kernel-support. More runtime kernel version checking is done in 2.81rc5 in various parts of the code, so expand the ipset patch' scope to inlude those new areas and rename to something a bit more generic.:wq Upstream changes from rc4 532246f Tweak to DNSSEC logging. 8caf3d7 Fix rare problem allocating frec for DNSSEC. d162bee Allow overriding of ubus service name. b43585c Fix nameserver list in auth mode. 3f60ecd Fixed resource leak on ubus_init failure. 0506a5e Handle old kernels that don't do NETLINK_NO_ENOBUFS. e7ee1aa Extend stop-dns-rebind to reject IPv6 LL and ULA addresses. We also reject the loopback address if rebind-localhost-ok is NOT set. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: remove support for kernel 4.14Adrian Schmutzler2020-04-0670-26575/+0
| | | | | | | | | | | This target has been on kernel 4.19 for several months [1] and already uses kernel 5.4 as testing kernel. Therefore, it should not be necessary to keep support for kernel 4.14 as well. [1] 2a82e0e1ca0f ("ipq806x: switch to 4.19 kernel version") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065/nbg6817]
* ramips: add DTS triggers to USB LEDs for F9K1109v1Kip Porterfield2020-04-063-2/+19
| | | | | | | Alter DTS for Belkin F9K1109v1 to trigger USB leds from the echi/ochi ports. Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
* mediatek: set v5.4 as defaultJohn Crispin2020-04-061-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add hw flow table offloadingJohn Crispin2020-04-061-0/+1251
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: add support for rtl8367cJohn Crispin2020-04-06127-0/+93948
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: drop v4.14 supportJohn Crispin2020-04-06142-24602/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: more v5.4 fixesJohn Crispin2020-04-064-13/+118
| | | | | | These are all backports and/or on their way upstream. Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: consolidate partition names and settingsJohn Crispin2020-04-066-17/+24
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: fix elecom board nameJohn Crispin2020-04-061-1/+1
| | | | | | menuconfig was showing the the company name twice. Signed-off-by: John Crispin <john@phrozen.org>
* generic: fix flow table hw offloadJohn Crispin2020-04-063-45/+54
| | | | | | Make the driver work with recent upstream changes. Signed-off-by: John Crispin <john@phrozen.org>
* netifd: fix 14_migrate-dhcp-release scriptPeter Stadler2020-04-051-1/+1
| | | | | | prepend 'uci' to 'commit network' Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
* ramips: fix path for dma-ralink and mtk-hsdmaChuanhong Guo2020-04-051-2/+4
| | | | | | | These two drivers were available in drivers/staging in 5.4. Fix driver paths for them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* dropbear: backport add ip address to exit without auth messagesKevin Darbyshire-Bryant2020-04-052-1/+120
| | | | | | | 201e359 Handle early exit when addrstring isn't set fa4c464 Improve address logging on early exit messages (#83) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: Move hostapd variants to WirelessAPD menuKevin Darbyshire-Bryant2020-04-051-0/+9
| | | | | | | | | | | It seemed very confusing when trying to select the different variants of hostapd which are somewhat scattered about under the menu 'Network'. Moving all hostapd variants under a common submenu helps avoid confusion. Inspired-by: Kevin Mahoney <kevin.mahoney@zenotec.net> [Fixup badly formatted patch, change menu name] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* umdns: update to the version 2020-04-05Kevin Darbyshire-Bryant2020-04-051-4/+4
| | | | | | | ab7a39a umdns: fix unused error 45c4953 dns: explicitly endian-convert all fields in header and question Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "generic: 5.4: Add 4B_OPCODES flag to w25q256"Chuanhong Guo2020-04-056-35/+8
| | | | | | | | | | | This reverts commit d7f21940bcaf70ba404d354c7fa6519c1717d00a. Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID, but only the latter has proper 4B_OPCODES support. W25Q256FV has all 4B read instructions but it lacks a 4B page program instruction, causing the entire flash to be read-only. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: Fix miss config and module for mlx driverTan Zien2020-04-041-3/+10
| | | | | | | | | Missing config symbols could lead to build failures on kernel 4.14/4.19. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rephrase commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* umdns: suppress address-of-packed-member warningKevin Darbyshire-Bryant2020-04-041-2/+2
| | | | | | | | | | | | | | | | | gcc 8 & 9 appear to be more picky with regards access alignment to packed structures, leading to this warning in dns.c: dns.c:261:2: error: converting a packed ‘struct dns_question’ pointer (alignment 1) to a ‘uint16_t’ {aka ‘short unsigned int’} pointer (alignment 2) may result in an unaligned pointer value [-Werror=address-of-packed-member] 261 | uint16_t *swap = (uint16_t *) q; Work around what I think is a false positive by turning the warning off. Not ideal, but not quite as not ideal as build failure. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* treewide: convert sed -r to posix -EKevin Darbyshire-Bryant2020-04-042-2/+2
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: improve mikrotik-caldata.shThibaut VARÈNE2020-04-041-2/+7
| | | | | | | | | | Reduce unnecessary flash wear and be tidy: - Run the extraction only if necessary - Extract temporary file to /tmp - cleanup after execution Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATEINAGAKI Hiroshi2020-04-041-4/+2
| | | | | | | | | | | | | | | | | In RTL8367B (RTL8367RB/RTL8367R-VB), the driver in GPL tars of the devices with this switch directly uses the ID of external interface as a bit offset. We should use the same way. ref (RTL8367B): - ASUS RT-N56U - TP-Link Archer C2 v1 ref (RTL8367): - TP-Link TL-WR2543ND v1 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: rtl8367b: fix DEBUG register address for extif2INAGAKI Hiroshi2020-04-041-1/+1
| | | | | | | | RTL8367B_CHIP_DEBUG1_REG (0x1304) is for external interface 1. For external interface 2, use RTL8367B_CHIP_DEBUG2_REG (0x13e2) instead. Fixes: 9801d61c4a ("kernel: rtl8367b: add configuration for extif2") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: mt7621: bringup dsa master on preinitChuanhong Guo2020-04-041-0/+22
| | | | | | | | DSA requires master netdev to be up before any of its slave ports. Bring it up during preinit so that the first lan port can be used on failsafe. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: disable image for mikrotik_rbm11gChuanhong Guo2020-04-041-0/+1
| | | | | | | It's unknown which switch port is used on mikrotik_rbm11g. Disable this image until someone with actual device fixes this problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: remove set_preinit_iface scriptChuanhong Guo2020-04-041-59/+0
| | | | | | | | | | This script isn't suitable for mt7621 anymore due to switching to DSA and it needs a different preinit script. Generic preinit logic in package/base-files has the ability to parse board.json and pick preinit iface accordingly. Just remove this script instead of moving it into subtargets. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: mt7530: fix null pointer dereferencing in port5 setupDENG Qingfang2020-04-041-0/+39
| | | | | | | | | | | | | The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* generic: backport support for MT7530 DSA port mirroringDENG Qingfang2020-04-041-0/+123
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: correct MTC WR1201 LAN ports namesRené van Dorst2020-04-041-4/+4
| | | | | | | LAN ports of MTC WR1201 are reversed, so correct their names Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: add new NAND driverDENG Qingfang2020-04-044-2/+1496
| | | | | | Add new NAND driver for MT7621 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: drop obsolete mx25l25635f dts hackDENG Qingfang2020-04-042-2/+2
| | | | | | 5.4 kernel has fixed this issue, so the hack is no longer needed. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* Revert "ramips: mt7621: disable images for gehua_ghl-r-001"DENG Qingfang2020-04-041-1/+0
| | | | | | | This reverts commit 28080d54d217fb4ab112e079f69462fee695dbf8. Support for MX25L25635F flash is fixed upstream Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: move swconfig to subtargets except for MT7621DENG Qingfang2020-04-046-7/+6
| | | | | | | As MT7621 does not use swconfig anymore, move the package swconfig to other subtargets. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: introduce 'soc_device' initializationDENG Qingfang2020-04-041-0/+89
| | | | | | | | | | | | | | | mt7621 SoC has its own 'ralink_soc_info' structure with some information about the soc itself. Pcie controller and pcie phy drivers for this soc which are still in staging git tree make uses of 'soc_device_attribute' looking for revision 'E2' in order to know if reset lines are or not inverted. This way of doing things seems to be necessary in order to make things clean and properly. Hence, introduce this 'soc_device' to be able to properly use those attributes in drivers. Also set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: fix MikroTik 750Gr3 LAN ports namesDENG Qingfang2020-04-042-4/+7
| | | | | | They are labeled as LAN2..LAN5 instead of LAN1..LAN4 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: use SoC I2C instead of bitbanged for Ubiquiti ER-X-SFPDENG Qingfang2020-04-043-13/+8
| | | | | | | The original idea of bitbanged I2C is to use i2c-gpio-custom Since i2c-gpio-custom is no longer available on 5.4, use SoC I2C instead Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addressesDENG Qingfang2020-04-042-7/+18
| | | | | | | | | | | | | | | | | The name of each user port should be eth0..4, instead of lan1..4 and there is no WAN port. Rename them to match the official firmware. To avoid conflict with the master port (gmac0), rename it to "dsa". The official firmware assigns MAC address in this way: eth0 = label mac eth1 = label mac + 1 ... eth4 = label mac + 4 Since we have switched to DSA, it's possible to use different MAC for each port. Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: net-label supportDENG Qingfang2020-04-041-0/+34
| | | | | | Add support for renaming ethernet interfaces in DTS Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: switch kernel version to 5.4DENG Qingfang2020-04-041-0/+2
| | | | | | | After all dts and config changes, 4.14 no longer works on mt7621. Switch it to 5.4 directly. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: change default ramips_setup_interfaces configurationDENG Qingfang2020-04-041-63/+1
| | | | | | | Most of MT7621 boards have LAN1~4 and WAN, so make this as the default Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621 remove unused pinctrl groups in dtsDENG Qingfang2020-04-0412-12/+12
| | | | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [split commit, remove leftover uart3->gpio setup] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: update dts/defconfig for DSADENG Qingfang2020-04-0470-317/+1888
| | | | | | | | | | | update dts and network/LED configuration for DSA driver. sysupgrade from images prior to this commit with config preserved will cause broken ethernet setup. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Acked-by: Jo-Philipp Wich <jo@mein.io> [split commit] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: mt7621: backport GPIO driver fixDENG Qingfang2020-04-042-0/+118
| | | | | | Backport 2 patches from linux-next to fix mt7621 GPIO driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update PCIe node in dtsiDENG Qingfang2020-04-041-14/+29
| | | | | | Update PCIe node in dtsi to match the new driver Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: backport PCIe driver fixes from staging-testDENG Qingfang2020-04-0420-0/+1730
| | | | | | Backport mt7621-pci/mt7621-pci-phy fixes from staging-test Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: update pinctrl nodesDENG Qingfang2020-04-0466-156/+156
| | | | | | Upstream GPIO driver uses "groups" "function" properties Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: mt7621: convert GPIO dts refsDENG Qingfang2020-04-0470-374/+374
| | | | | | | The upstream driver does not use &gpio0..2 banks notation anymore, so convert them to &gpio Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 18:10:30 +0000