aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 4.14 to 4.14.136Koen Vandeputte2019-08-0627-173/+60
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 306-v4.16-netfilter-remove-saveroute-indirection-in-struct-nf_.patch Remove upstreamed: - 100-powerpc-4xx-uic-clear-pending-interrupt-after-irq-ty.patch - 088-0002-i2c-qup-fixed-releasing-dma-without-flush-operation.patch - 500-arm64-dts-marvell-Fix-A37xx-UART0-register-size.patch Fixes: - CVE-2019-13648 - CVE-2019-10207 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.187Koen Vandeputte2019-08-0615-42/+42
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 021-bridge-multicast-to-unicast.patch Compile-tested on: none Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mediatek: add new dts files for mt7622 to v4.14John Crispin2019-08-062-0/+1123
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* Revert "kernel: generic: fix fonfxc uimage parser"Rafał Miłecki2019-08-061-14/+7
| | | | | | | | | | | | | | | | | This reverts commit e92a14709d37f64dcba8c81fa51e61e5f10f439a. mtdsplit_uimage_parse_fonfxc() gets called in two situations: 1) It was /requested/ from DT using "fonfxc,uimage" compatible string 2) It was called by parsing code after finding "firmware" (MTD_SPLIT_FIRMWARE_NAME) due to the parser's type Code added in the /fix/ commit basically just disabled the second case. If that's the real goal it could be achieved by simply dropping type MTD_PARSER_TYPE_FIRMWARE. It may however require another solution as it's possible that some non-DT target actually needs fonfxc uImage parsing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: update the mt7531 switch driverJohn Crispin2019-08-061-211/+94
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* adb: fix build breakage on recent muslPetr Štetiar2019-08-061-0/+10
| | | | | | | | | | | | | | | | | | Fix build breakage as upstream has removed implicit include of sys/sysmacros.h from sys/types.h: remove implicit include of sys/sysmacros.h from sys/types.h this reverts commit f552c792c7ce5a560f214e1104d93ee5b0833967, which exposed the sysmacros.h macros (device major/minor calculations) for BSD and GNU profiles to mimic an unintentional glibc behavior some code depended on. glibc has deprecated and since removed them as the resolution to bug #19239, so it makes no sense for us to keep this behavior. affected code should all have been fixed by now, and if it's not yet fixed it needs to be for use with modern glibc anyway. Ref: https://git.musl-libc.org/cgit/musl/commit/include/sys/types.h?id=a31a30a0076c284133c0f4dfa32b8b37883ac930 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-atm: Add missing headersRosen Penev2019-08-052-1/+31
| | | | | | This fixes compilation with -Werror=implicit-function-declaration. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain: Remove powerpc64 libc restrictionRosen Penev2019-08-051-4/+2
| | | | | | | | | | Starting with version 1.1.15, musl supports powerpc64. There are no known users of powerpc64 yet. This is effectively a revert of 0de93311e1575ab6f8e9e90b5023b6fb2cedcf1f Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu: remove support for deprecated DSA bindingsTomasz Maciej Nowak2019-08-051-1/+0
| | | | | | | | These legacy bindings were removed long time ago from dts, so there's no need to keep support for them. Spotted-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* toolchain: fix gcc depends on kernel headersHauke Mehrtens2019-08-051-1/+1
| | | | | | | | | | | | GCC needs the kernel headers to compile. Some GCC file includes asm/unistd.h which is provided by the kernel headers. Normally the kernel headers build is very fast and ready before the gcc uses it, but if it clones the kernel from a slow git repository it takes longer and then it could be that the gcc already wants to use the kernel headers before they are available. This patch fixes this problem by adding the missing dependency. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* mvebu: enable xHCI USB controller connected to PCIeTomasz Maciej Nowak2019-08-052-0/+2
| | | | | | | | | | This commit fixes regression on Linksys WRT1900 (Mamba) where this device doesn't have USB 3.0 controller integrated in SoC, instead it has Etron EJ168 connected to PCIe lane. Previously enabled in kernel 4.4 and 4.9, was lost in transition to 4.14. Fixes: 4ccad92 ("mvebu: Add support for kernel 4.14") Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: drop mvebu support in kmod-usb3Tomasz Maciej Nowak2019-08-054-1/+3
| | | | | | | This is already enabled as kernel built-in feature in mvebu target and none other target will use it. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* build: include BUILD_VARIANT in PKG_BUILD_DIRJeffery To2019-08-0517-23/+2
| | | | | | | | | | | This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into account (if set), so that packages do not need to manually override PKG_BUILD_DIR just to handle variants. This also updates most base packages with variants to use the updated default PKG_BUILD_DIR. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* mpc85xx: correct OCEDO Panda LED definitionDavid Bauer2019-08-051-2/+2
| | | | | | | WLAN0 and the unused LED are currently swapped. Fix this, so the LED behavior matches the other OCEDo devices. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for TP9343-based TP-Link TL-WR94x devicesAdrian Schmutzler2019-08-058-0/+297
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for several TP-Link devices based on TP9343 ("a QCA9561 without PCIe and USB"): - TL-WR940N v3 - TL-WR940N v4 - TL-WR941ND v6 The devices are only different concerning LEDs and MAC address assignment. All TL-WR940 are with non-detachable antennas (N), all TL-WR941 devices are with detachable antennas (ND). Specification: - 750 MHz CPU - 32 MB of RAM - 4 MB of FLASH - 2.4 GHz WiFi - 4x 10/100 Mbps Ethernet Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to * (see below) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. * TFTP image names: 940 v3: wr941ndv6_tp_recovery.bin 940 v4: wr940nv4_tp_recovery.bin 941 v6: wr941ndv6_tp_recovery.bin Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ethtool: bump to 5.2Hans Dedecker2019-08-051-2/+2
| | | | | | | | | 379c096 Release version 5.2. 2bce6d9 ethtool: Add 100BaseT1 and 1000BaseT1 link modes 67ffbf5 ethtool: sync ethtool-copy.h with linux-next from 30/05/2019 687152b ethtool.spec: Use standard file location macros Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* firewall: update to latest git HEADHans Dedecker2019-08-051-3/+3
| | | | | | de94097 utils: coverity resource leak warning Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: add support for D-Link DIR-842 C1Jackson Lim2019-08-058-144/+207
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware spec of DIR-842 C1: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: circuit onboard, but components are not soldered Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Jackson Lim <jackcolentern@gmail.com> [fix whitespace issues] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12Adrian Schmutzler2019-08-051-0/+4
| | | | | | In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link TL-WR841N/ND v12Adrian Schmutzler2019-08-056-23/+49
| | | | | | | | | | | | | | | | | | | | | | | This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv11_tp_recovery.bin (it's really v11, not v12) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link TL-WR841N/ND v10Adrian Schmutzler2019-08-055-3/+27
| | | | | | | | | | | | | | | | | | | | | | | The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor changes, it contains a newer revision of the QCA9533 SoC and the CPU clock is significantly higher. Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv10_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipset: update to 7.3DENG Qingfang2019-08-051-3/+3
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ar71xx: wpj531: fix SIG1/RSS1 LED GPIOLeon M. George2019-08-041-1/+1
| | | | | | | | | | | | | | In commit 6c937df749c7 ("ar71xx: wpj531: fix GPIOs for LED") wrong GPIO 13 for SIG1/RSS1 LED was commited, the correct GPIO number for this LED is 12. It's listed in "Hardware Guide - wpj531 7A06 (02/07/2019)" as GPIO12/RSS1 on the LED header and same GPIO 12 is used in the vendor's SDK as well. Fixes: 6c937df749c7 ("ar71xx: wpj531: fix GPIOs for LED") Signed-off-by: Leon M. George <leon@georgemail.eu> [commit subject/message facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: fix fonfxc uimage parserNOGUCHI Hiroshi2019-08-041-7/+14
| | | | | | | | | | | | | | | | We cannot distinguish between fonfxc uImage and generic uImage because fonfxc uImage header is almost same as generic uImage, except padding length after image name. The fonfxc uImage parser is available when specifying directly with DT compatible property. So this patch adds check if the partition DT node is compatible with the parser. Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2413 Fixes: a1c6a316d299 ("ramips: add support for Fon FON2601") Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com> [commit light touches and removed C code comment] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* firmware-utils: uimage_padhdr: fix Coverity issuePetr Štetiar2019-08-041-12/+12
| | | | | | | | | | | | | | | | | | | Fixes following issue reported by Coverity scan: *** CID 1452085: Security best practices violations (TOCTOU) /tools/firmware-utils/src/uimage_padhdr.c: 100 in main() 94 95 if (!infname || !outfname) { 96 usage(argv[0]); 97 exit(1); 98 } 99 >>> CID 1452085: Security best practices violations (TOCTOU) >>> Calling function "stat" to perform check on "infname". 100 if (stat(infname, &statbuf) < 0) { Fixes: a1c6a316d299 ("ramips: add support for Fon FON2601") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sdk: Fix cryptodev-linux build when CONFIG_ARM64_MODULE_PLTS=yJeffery To2019-08-041-1/+2
| | | | | | | | When CONFIG_ARM64_MODULE_PLTS=y, arch/arm64/kernel/module.lds is required to build cryptodev-linux. This updates the sdk to include this file. Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* wireless-regdb: fix build when python2 from package feeds existsPetr Štetiar2019-08-041-1/+1
| | | | | | | | | | | | | | | wireless-regdb fails to build if there is python2 installed from package feeds, as staging_dir/hostpkg/bin/python is python2 and staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin (proper place with python -> python3 symlink) which leads to the build failure of wireless-regdb, so this patch makes it explicit which python should be used. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Russell Senior <russell@personaltelco.net> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* brcm2708: split up DEVICE_TITLEMoritz Warning2019-08-041-3/+5
| | | | | | | | | Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Fixes https://github.com/openwrt/openwrt/pull/2245 Signed-off-by: Moritz Warning <moritzwarning@web.de> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ccache: update to 3.7.2DENG Qingfang2019-08-042-3/+3
| | | | | | | | | Update ccache to 3.7.2 Release notes: https://ccache.dev/releasenotes.html#_ccache_3_7_2 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* brcm2708: fix warnings due to non-breaking spaceÁlvaro Fernández Rojas2019-08-041-1/+1
| | | | | | | Reported by ZWx4 on Github: https://github.com/openwrt/openwrt/commit/19226502bf6393706defe7f049c587b32c9b4f33#r34555799 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mediatek: fix typo in Banana Pi R64 device titleAdrian Schmutzler2019-08-042-20/+1
| | | | | | | The DEVICE_TITLE introduced in 66458c49aa14 ("mediatek: add v4.19 support") is mistyped. Fix it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "dnsmasq: backport latest patches"Kevin Darbyshire-Bryant2019-08-0352-1988/+32
| | | | | | This reverts commit e9eec39aacde450ba87598d85987b374ce6aed95. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "dnsmasq: improve insecure DS warning"Kevin Darbyshire-Bryant2019-08-032-28/+1
| | | | | | This reverts commit cd91f2327ffb06a41129a35ae7be1e7923a78d74. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mdadm: Fix compile with musl 1.1.23Hauke Mehrtens2019-08-033-3/+225
| | | | | | | This adds missing includes for sys/sysmacros.h which are needed with musl libc 1.1.23. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm27xx-armstub: remove packageÁlvaro Fernández Rojas2019-08-031-54/+0
| | | | | | | Apparently, latest RPi firmware doesn't need this to boot RPi 4 64 bit kernels. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: arm8stub is no longer neededÁlvaro Fernández Rojas2019-08-031-8/+3
| | | | | | It's already embedded on latest RPi firmware. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: fix RPi 4 NVRAMÁlvaro Fernández Rojas2019-08-031-0/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708: clean up target configsÁlvaro Fernández Rojas2019-08-034-13/+3
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq40xx: remove redundant PHY_POLL set codeChristian Lamparter2019-08-022-12/+2
| | | | | | | | The [devm_]mdiobus_alloc[_size()] functions are creating the array of interrupt numbers as well as initializing them to POLLING. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: decouple mdio-ipq40xx and ar40xxChristian Lamparter2019-08-022-235/+234
| | | | | | | This makes it possible to delete the ar40xx driver in the future by just removing the file. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: extend DT mdio node to be more accessibleChristian Lamparter2019-08-021-6/+6
| | | | | | | | The MDIO node will become more important in the future. Hence, this patch adds DT labels to make the properties inside the various subnodes more accessible. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* at91: split up DEVICE_TITLEMoritz Warning2019-08-021-19/+39
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* apm821xx: split up DEVICE_TITLEMoritz Warning2019-08-021-6/+11
| | | | | | Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* ipq806x: split up DEVICE_TITLEMoritz Warning2019-08-021-15/+36
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* bcm53xx: split up DEVICE_TITLEMoritz Warning2019-08-021-24/+46
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* gemini: split up DEVICE_TITLEMoritz Warning2019-08-021-7/+14
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* octeon: split up DEVICE_TITLEMoritz Warning2019-08-021-2/+4
| | | | | | Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* brcm2708: add bcm2711 subtarget (RPi 4B aarch64)Álvaro Fernández Rojas2019-08-025-4/+623
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm27xx-armstub: add new packageÁlvaro Fernández Rojas2019-08-021-0/+54
| | | | | | This package is needed for RPi 4B AARCH64 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest firmwareÁlvaro Fernández Rojas2019-08-021-14/+14
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:29:25 +0000