aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.141John Audia2021-08-215-6/+6
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.60Rui Salvaterra2021-08-215-8/+8
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* gdb: update to 10.2Rosen Penev2021-08-217-106/+100
| | | | | | | | | | | Replace some OpenWrt patches with openembedded ones for easier maintainability. Remove several outdated ones as well. Replace PKG_RELEASE with AUTORELEASE to avoid manual bumps. Remove !arc dependency as it is supported upstream now. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mediatek: mt7623: enable more hardware featuresDaniel Golle2021-08-214-15/+118
| | | | | | | In order to make HDMI console available on the BananaPi BPi-R2 select various Kconfig symbols which are useful for systems with graphics. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: pass console=tty1 for BPi-R2Daniel Golle2021-08-211-1/+1
| | | | | | | BananaPi BPi-R2 comes with HDMI and MIPI-DSI. Use dislpay facility in Linux by add "console=tty1" boot argument. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Do not deactivate staging driversHauke Mehrtens2021-08-216-6/+0
| | | | | | | | | Do not deactivate the kernel configuration symbol CONFIG_STAGING in the target configurations any more. This prevented the build of the exfat.ko for example. Fixes: FS#3979 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: Do not activate ext2 and ext3 driver optionsHauke Mehrtens2021-08-211-6/+0
| | | | | | | | The ext3 driver was already removed, the kernel config options are only there for backwards compatibility. The eth4 driver takes care of ext3 file systems. The ext4 driver also handled ext2 file systems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* archs38: Do not activate ext3 driver optionsHauke Mehrtens2021-08-211-3/+0
| | | | | | | | The ext3 driver was already removed, the kernel config options are only there for backwards compatibility. The eth4 driver takes care of ext3 file systems. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91bootstrap: Fix compile with binutils 2.36Hauke Mehrtens2021-08-211-0/+38
| | | | | | | This fixes a build problem seen after binutils 2.36 is used by default. Fixes: 3f41153b1c28 ("toolchain/binutils: switch to version 2.36.1 by default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-at91: fix dtc compilation on host gcc 10Hauke Mehrtens2021-08-212-9/+49
| | | | | | Backport a patch from upstream U-Boot to fix the compile with host GCC 10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: fix build with GCC 10 on 32 x86 targetsStijn Tintel2021-08-201-0/+123
| | | | | | Backport upstream patch to fix build with GCC 10 on 32 x86 targets. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mediatek: convert mtd-mac-address to nvmem for MT7629 RFBAdrian Schmutzler2021-08-207-24/+70
| | | | | | | This conversion appears to have been overlooked since it's in a kernel patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736xAdrian Schmutzler2021-08-204-5/+48
| | | | | | | Convert this series by moving the definitions to the individual devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: convert mtd-mac-address to nvmem for UniElec devicesAdrian Schmutzler2021-08-207-18/+80
| | | | | | | | | Convert this series by moving the definitions to the individual devices. Now all devices on ramips are converted. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: remove redundant nvmem definitionsAdrian Schmutzler2021-08-2020-172/+22
| | | | | | | | | Due to use of a script when migrating from mtd-mac-address, a few of the definitions are redundant in DTSI and DTS files. Remove those and consolidate the definitions in parent DTSI files in a few cases. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove redundant nvmem definitionsAdrian Schmutzler2021-08-2017-170/+0
| | | | | | | | Due to use of a script when migrating from mtd-mac-address, a few of the definitions are redundant in DTSI and DTS files. Remove those. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix indent in DTS for GL.iNet VIXMINI/microuter-N300Adrian Schmutzler2021-08-202-2/+2
| | | | | | Use correct indent. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: convert mtd-mac-address to nvmem for D-Link DIR-8xxAdrian Schmutzler2021-08-208-13/+137
| | | | | | | Convert this series by moving the definitions to the individual devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* selinux-policy: update to version 0.9Daniel Golle2021-08-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | 592ac0f add a note 4bacd14 sslcertfile: list /etc/ssl 7bdefa4 example: indicate that skip is an option d1e9a85 wifi: sys pipe usage eb903e1 README: add note about policycoreutils-setfiles weak dependency 762e011 ttyd: signull all subjects fbfc079 acme: add basic support for acme_cleanup.sh and acme_setup.sh 9ac7592 acme: transition to sys.subj on generic initscript execution f3dd1ba acme: missing rules related to sys.subj trans on file.initscriptfile ae273fa odhcp6c/netifd: support drop-in directories 5fa9b41 subj: do not encourage misconfiguration 44722b6 blockd, logd, odhcpc6, ubiutil, mtdstordev a775d93 21.02 related a473691 rcboot runs rcuhttpd which creates /tmp/etc for /tmp/etc/uhttpd 290e9fb rcuhttpd: related to rcboot and uci-defaults 3fc0d8b rcuhttpd: lists /etc/uci-defaults 1f5ef48 removes ubvol.lock policy and adds move mtd/ubi partitions Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: fix build with SELinuxDaniel Golle2021-08-191-1/+1
| | | | | | | | The option '-xattr' for mksquashfs4 should be '-xattrs' which lead to build failure with SELinux enabled. Add the missing 's'. Fixes: 4baf47b9a8 ("images: squashfs: xattrs should not depend on buld host") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: convert remaining mtd-mac-address cases to nvmemAdrian Schmutzler2021-08-1864-157/+1406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the nvmem-based approach for retrieving MAC addresses appears to depend on the addresses being set up after the partitions, it is no longer possible to keep the MAC address setup in shared DTSI files while the partitions itself are set up in DTS files for the individual devices. In ath79 the firmware partition is typically located somewhere "in the middle" of the partition table. Thus, it's not trivial to share the partitions containing MAC address information in a common DTSI (like we did in some cases on ramips). In this commit, MAC address setup is thus moved to the relevant partitions, and in most cases needs to be duplicated. While the duplication is not really nice, it eventually provides a cleaner and more tidy setup, making the DTS(I) file fragmentation a bit more logical. This should also help with adding new devices, as information is distributed across less locations. For consistency, this commit also moves the mtd-cal-data property "down" together with the MAC address setup, so it's not based on a partition before the latter is defined either. (This is only done for those files touched due to nvmem conversion.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: convert most mtd-mac-address cases in DTSI to nvmemAdrian Schmutzler2021-08-1847-1021/+938
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert most of the cases from mtd-mac-address to nvmem where MAC addresses are set in the DTSI, but the partitions are only located in the device DTS. This posed some problems earlier, since in these cases we are using partitions before they are defined, and the nvmem system did not seem to like that. There have been a few different resolution approaches, based on the different tradeoffs of deduplication vs. maintainability: 1. In many cases, the partition tables were identical except for the firmware partition size, and the firmware partition was the last in the table. In these cases, the partition table has been moved to the DTSI, and only the firmware partition's "reg" property has been kept in the DTS files. So, the updated nvmem definition could stay in the DTSI files as well. 2. For all other cases, splitting up the partition table would have introduced additional complexity. Thus, the nodes to be converted to nvmem have been moved to the DTS files where the partitioning was defined. 3. For Netgear EX2700 and WN3000RP v3, the remaining DTSI file was completely dissolved, as it was quite small and the name was not really nice either. 4. The D-Link DIR-853 A3 was converted to nvmem as well, though it is just a plain DTS file not taken care of in the first wave. In addition, some minor rearrangements have been made for tidyness. Not covered (yet) by this patch are: * Various unielec devices * The D-Link DIR-8xx family Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm27xx-userland: factor out a -dev packageMichael Heimpold2021-08-181-4/+30
| | | | | | | | | | | | Installing headers and static libraries to the target system seems to be not required for most use cases, so let's factor them out into a dedicated -dev package. This cuts down to disk usage to around 50% of the original package to ~ 2MB - not that disk space is an issue normally, but when using inside an initramfs only project, it counts. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* toolchain/gcc: switch to version 10 by defaultStijn Tintel2021-08-182-7/+7
| | | | | | | | | | | | | | | Runtime-tested on: * ath79 * bcm27xx/bcm2708 * bcm27xx/bcm2709 * bcm27xx/bcm2711 * mvebu/cortexa53 * octeon * realtek * x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/binutils: switch to version 2.36.1 by defaultStijn Tintel2021-08-182-2/+2
| | | | | | | | | | | | | | | Runtime-tested on: * ath79 * bcm27xx/bcm2708 * bcm27xx/bcm2709 * bcm27xx/bcm2711 * mvebu/cortexa53 * octeon * realtek * x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* umbim: bump to git HEADStijn Tintel2021-08-181-3/+3
| | | | | | | de56231 umbim: fix compilation with GCC 10 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: fix compilation with GCC 10Stijn Tintel2021-08-181-3/+0
| | | | | | | | | | | | | | When compiling busybox with GCC 10 and CONFIG_PKG_ASLR_PIE_ALL=y, there are hundreds of errors like: relocation R_MIPS16_26 against `xzalloc' cannot be used when making a shared object; recompile with -fPIC Simply solve this by no longer disabling PKG_ASLR_PIE, so that $(FPIC) is properly added to the CFLAGS and LDFLAGS. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: fix Edgecore ECW5211 bootStijn Tintel2021-08-181-0/+1
| | | | | | | The bootloader will look for a configuration section named ap.dk01.1-c2 in the FIT image. If this doesn't exist, the device won't boot. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: add WPS button for newifi d1David Yang2021-08-171-1/+7
| | | | | | This device has a WPS button under WiFi antenna cover, add it to dts. Signed-off-by: David Yang <mmyangfl@gmail.com>
* ramips: mt7628: move mtd-eeprom out of root DTSIAdrian Schmutzler2021-08-1744-9/+90
| | | | | | | | | | | | | | | | | | | | | | | | The mt76x8 subtarget is the only one in ramips that stores the mediatek,mtd-eeprom property directly in the "root" mt7628an.dtsi. This is not optimal for a few different reasons: * If you don't really know it or are used to other (sub)targets, the property will be set somewhat magically. * The property is set based on &factory partition before (if at all) this partition is defined. * There are several devices that have different offset or even different partitions to read from, which will then be overwritten in the DTS files. Thus, definitions are scattered between root DTSI and individual files. Based on these circumstances, the "root" definition is removed and the property is added to the device-based DTS(I) files where needed and applicable. This should be easier to grasp for unexperienced developers and will move the property closer to the partition definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.59Rui Salvaterra2021-08-162-3/+3
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* base-files: rename 'sdcard' to 'legacy-sdcard'Daniel Golle2021-08-168-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While an image layout based on MBR and 'bootfs' partition may be easy to understand for users who are very used to the IBM PC and always have the option to access the SD card outside of the device (and hence don't really depend on other recovery methods or dual-boot), in my opinion it's a dead end for many desirable features on embedded systems, especially when managed remotely (and hence without an easy option to access the SD card using another device in case things go wrong, for example). Let me explain: * using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a single corruption of the bootfs can render the system into a state that it no longer boots at all. This makes dual-boot useless, or at least very tedious to setup with then 2 independent boot partitions to avoid the single point of failure on a "hot" block (the FAT index of the boot partition, written every time a file is changed in bootfs). And well: most targets even store the bootloader environment in a file in that very same FAT filesystem, hence it cannot be used to script a reliable dual-boot method (as loading the environment itself will already fail if the filesystem is corrupted). * loading the kernel uImage from bootfs and using rootfs inside an additional partition means the bootloader can only validate the kernel -- if rootfs is broken or corrupted, this can lead to a reboot loop, which is often a quite costly thing to happen in terms of hardware lifetime. * imitating MBR-boot behavior with a FAT-formatted bootfs partition (like IBM PC in the 80s and 90s) is just one of many choices on embedded targets. There are much better options with modern U-Boot (which is what we use and build from source for all targets booting off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623. Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix functions with 'legacy_sdcard_' instead of 'sdcard_'. Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: add missing dependency and fix empty mount triggersDaniel Golle2021-08-152-3/+7
| | | | | | | | | | | | | procd.sh: Instead of triggering on every mount.add event, there should be no mount trigger at all in case none of the directories passed to procd_add_*_mount_trigger() are located on a mountpoint configured in /etc/config/fstab. uxc: add missing dependency on rpcd. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2021-08-151-3/+3
| | | | | | | | | | 040fecc system: fix issues reported by Coverity 48f481b service: make sure string read is null terminated 16dbc2a uxc: fix a bunch of issues discovered by Coverity ff9002f uxc: fix help output 104b49d uxc: support config in uvol Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall: update to git HEADKevin Darbyshire-Bryant2021-08-151-3/+3
| | | | | | 40e5f6a ipsets: permit default timeout of 0 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uboot-rockchip: update to v2021.07David Bauer2021-08-155-310/+70
| | | | | | Tested on NanoPi R2S Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.140John Audia2021-08-149-91/+9
| | | | | | | | | | | | | | | | Removed upstreamed bcm27xx/patches-5.4: 950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch 950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.139John Audia2021-08-1421-40/+41
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* procd: update to git HEADDaniel Golle2021-08-141-3/+3
| | | | | | | | 48638ad hotplug-dispatch: yet another rare memory leak disovered by Coverity 459b3e8 jail: fix several issues discovered by Coverity 2562e2b ujail-console: add missing error handling discovered by coverity Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2021-08-141-3/+3
| | | | | | | | | 629726d blockd: fix resource leak discovered by coverity scan 68ae639 libubi: fix several issues discovered by Coverity a77c4fa ubi: fix resource leak in legacy codepath 2e3aca2 block: fix two resources leaks discovered by Coverity Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.58Rui Salvaterra2021-08-145-7/+7
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.57Rui Salvaterra2021-08-147-20/+21
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ipq40xx: ar40xx: reset port status registerDavid Bauer2021-08-141-2/+1
| | | | | | | This resolves incosnsitencies of the configured RX / TX flow control modes between different boards or bootloaders. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: ar40xx: use FIELD_GET macroDavid Bauer2021-08-141-7/+8
| | | | | | This improves code readability. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: increase EX6150v2 SPI frequencyDavid Bauer2021-08-141-1/+1
| | | | | | | | | The chip supports clock speeds up to 50 MHz, however it won't even read the chip-id correctly at this frequency. 45 MHz however works reliable. Signed-off-by: David Bauer <mail@david-bauer.net>
* procd: update to git HEADDaniel Golle2021-08-131-3/+3
| | | | | | 9f233f5 system: make rootfs type accessible through board call Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: add missing config symbolDavid Bauer2021-08-131-0/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: add missing config symbolsDavid Bauer2021-08-132-0/+18
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* tegra: add missing Kconfig symbolDavid Bauer2021-08-132-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: add missing Kconfig symbolsDavid Bauer2021-08-131-0/+4
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 15:31:46 +0000