aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* arm64: switch boot-wrapper to working repositoryJo-Philipp Wich2016-11-051-1/+1
| | | | | | | | The original repo in this Makefile disappeared from the internet so use another copy of this repository on kernel.org. Also switch from git:// to https:// while being at it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* cns3xxx: fix UART resource overlapKoen Vandeputte2016-11-051-2/+2
| | | | | | | | | | | | Port 1 registers the same IO resources as port 2 in the kernel resource tree, which is wrong. Fix this by using it's own resources as indicated in the overview (cns3xxx.h). Compiled & Tested on several GW2388-4 laguna boards which utilizes all 3 ports. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Revert "mt76: update to the latest version, adds a tx queue configuration fix"Felix Fietkau2016-11-051-2/+2
| | | | | | | This reverts commit 32867540ea18db2c8b025723768093cd5c12f22b. A report indicates that this causes a tx/rx throughput regression Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: depend on linux/installJo-Philipp Wich2016-11-041-0/+1
| | | | | | | | | | Since commit 484cb91 "sdk: bundle required firmware files" there is an implicit dependency of the SDK on a prior Kernel compilation. Change target/Makefile to make this dependency explicit to avoid race conditions with parallel builds. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "mwl8k: remove synchronous device init hack"Felix Fietkau2016-11-041-0/+20
| | | | | | | This reverts commit cb037d1842d93b37457c896a8949e135ed6e0065. See 6aa07b82027f for more information Signed-off-by: Felix Fietkau <nbd@nbd.name>
* include: Cortex-A53 is also an AArch64 CPUFlorian Fainelli2016-11-041-0/+1
| | | | | | | | Specifying a mtune option with cortex-a53 is also valid for an aarch64 toolchain Fixes: SVN 48964 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ipq806x: fix zyxel image build errorFelix Fietkau2016-11-041-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: clean up the kernel config and reduce kernel image size by ↵Felix Fietkau2016-11-041-50/+7
| | | | | | disabling some unnecessary code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix a kconfig issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: remove ath10k delayed initialization hack"Felix Fietkau2016-11-041-0/+33
| | | | | | | | | This reverts commit efd9dec3195c603289ebb552f8650da9dd869828. ath10k can take a long time to probe, long enough for netifd to fail to initialize already configured wireless devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target/sdk: Switch to xz compression instead of bz2Daniel Engberg2016-11-041-4/+4
| | | | | | Switch to xz compression instead of using bz2. This makes a considerable difference in size, ar71xx SDK from 60M to 35M. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* apm821xx: add back end-of-UBI marker for the WNDR4700 and MR24Christian Lamparter2016-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "build: drop UBI EOF marker from images by default" (commit d27bce8d28eb129af0abd9c80a7756301b7d588a) removed the end-of-UBI marker. Without this marker, the boards will panic during boot: [ 1.683458] ubi0: attaching mtd4 [ 1.696181] ubi0 warning: scan_peb: valid VID header but corrupted EC header at PEB 31 [ 1.704367] ubi0 error: scan_peb: bad image sequence number 549886691 in PEB 32, expected 184585623 [ 1.713377] Erase counter header dump: [ 1.717110] magic 0x55424923 [ 1.720843] version 1 [ 1.723797] ec 0 [ 1.726752] vid_hdr_offset 512 [ 1.729880] data_offset 2048 [ 1.733094] image_seq 549886691 [ 1.736740] hdr_crc 0x92ba8130 [ 1.740472] erase counter header hexdump: [ 1.744493] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22 [ 1.751528] UBI error: cannot attach mtd4 [ 1.755373] hctosys: unable to open rtc device (rtc0) [ 1.761130] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.768604] Please append a correct "root=" boot option; here are the available partitions: [...] [ 1.856992] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.866519] Rebooting in 1 seconds..Auto calibration --- Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mt76: update to the latest version, adds a tx queue configuration fixFelix Fietkau2016-11-041-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix A-MSDU tx aggregation (FS#174)Felix Fietkau2016-11-041-0/+34
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: minor cleanupFelix Fietkau2016-11-041-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a tx A-MPDU aggregation issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: use external pci clock on ARV7506PW11Mathias Kresin2016-11-031-0/+1
| | | | | | | Fixes a ralink wireless driver related kernel crash as soon as a lot of data is tranfered via wireless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: cleanup dts filesMathias Kresin2016-11-0333-312/+35
| | | | | | | | | | | | | | - remove not existing properties - remove properties having the same values as the included dtsi - remove nodes which are disabled in the included dtsi and not enabled in dts - replace the deprecated pinctrl-* compatible strings - use the same labels for nodes as the included dtsi - move common used vr9 pci properties to vr9.dtsi - remove the unused stp node from HomeHub 2B devcie tree source file - fix spaces vs. tabs and remove superfluous linebreaks Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: replace the previous fix with a revert of the faulty upstream commitFelix Fietkau2016-11-031-5/+6
| | | | | | This avoids potential breakage in rt2x00usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* elfutils: bump to 0.167Luiz Angelo Daros de Luca2016-11-038-134/+16
| | | | Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* mwl8k: remove synchronous device init hackFelix Fietkau2016-11-031-20/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove ath10k delayed initialization hackMathias Kresin2016-11-031-33/+0
| | | | | | | | | LEDE no longer requires all PHYs to be initialized to create the configuration files during bootup. This patch removes the now obsolete ath10k patch. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files, mac80211, broadcom-wl: wifi detection and configurationChristian Lamparter2016-11-035-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the wifi detection script is executed as part of the (early) boot process. Pluggable wifi USB devices, which are inserted at a later time are not automatically detected and therefore they don't show up in LuCI. A user has to deal with wifi detection manually, or restart the router. However, the current "sleep 1" window - which the boot process waits for wifi devices to "settle down" - is too short to detect wifi devices for some routers anyway. For example, this can happen with USB WLAN devices on the WNDR4700. This is because the usb controller needs to load its firmware from UBI and initialize, before it can operate. The issue can be seen on a BT HomeHub 5A as well as soon as the caldata are on an ubi volume. This is because the ath9k card has to be initialized by owl-loader first. Which has to wait for the firmware extraction script to retrieve the pci initialization values inside the caldata. This patch moves the wifi configuration to hotplug scripts. For mac80211, the wifi configuration will now automatically run any time a "ieee80211" device is added. Likewise broadcom-wl's script checks for new "net" devices which have the "wl$NUMBER" moniker. Issues with spawning multiple interface configuration - in case the detection script is run concurrently - have been resolved by using a named section for the initial configuration. Concurrent configuration scripts will now simply overwrite the same existing configuration. A workaround which preserves the "sleep 1" window for just the first boot has been added. This allows the existing brcm47xx boot and mvebu uci-default scripts to correctly setup the initial mac addresses and regulatory domain. And finally, the patch renames the "wifi detect" into "wifi config". As the script no longer produces any output that has to be redirected or appended to the configuration file. Thanks to Martin Blumenstingl for helping with the implementation and testing of the patch. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files, mac80211, broadcom-wl: use uci to populate wireless configChristian Lamparter2016-11-033-42/+37
| | | | | | | | | | | | | | | | | | | | Previously, wifi detect simply dumped its generated wireless configuration to STDOUT. A second step was needed to append the configuration to /etc/config/wireless (or create it, if it didn't exist). With this patch, The wifi detection script will now use uci to update the wireless configuration directly. This patch also makes the initially created wifi-iface a named section ('default_radio$X' for mac80211 and 'default_wl$X' for broadcom). With this change, uci will not print the cfgHASH to STDOUT (which would now corrupt the wireless configuration). It will also prevent adding duplicated wifi interface configurations, if the wifi configuration is run concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: generate /etc/config/wireless, if it doesn't existMathias Kresin2016-11-031-0/+2
| | | | | | | | | | | | This patch adds a check in "wifi detect" to test if the wireless configuration file does exist. If it doesn't exist, an empty /etc/config/wireless file will be created. This is necessary because uci doesn't create new files, instead the tool just exits with "uci: Entry not found". Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: fix regdomain change issues with CONFIG_ATH_USER_REGDFelix Fietkau2016-11-032-21/+38
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix a minor issue in the header padding patchFelix Fietkau2016-11-031-0/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix AP powersave issues introduced in the last wireless-testing ↵Felix Fietkau2016-11-031-0/+27
| | | | | | update (FS#241) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: use 10 chars for feed name column widthRafał Miłecki2016-11-031-1/+1
| | | | | | | | It's always hard to find a reasonable width that will make everyone happy. This one at least makes "telephony" (one of default feeds) name fit the column and hopefully isn't too big. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: update DT in accordance to new drivers And add some more DT nodesPavel Kubelun2016-11-037-214/+90
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: switch to generic cpufreq driver cpufreq-dtPavel Kubelun2016-11-035-466/+383
| | | | | | | | This fixes ondemand frequency scaling and moves ipq806x onto upstream driver Also switching to ondemand frequency scaling as it is fixed now Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add opp patches for voltage scalingPavel Kubelun2016-11-032-0/+259
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update clk-qcom patchesPavel Kubelun2016-11-035-6/+563
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed ↵Pavel Kubelun2016-11-032-34/+43
| | | | | | leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ramips: Use MT7621 I2C driver for MT7628/MT7688Sven Schwermer2016-11-031-2/+4
| | | | | | | The i2c-ramips driver does not work for the MT7628/MT7688 SoCs, the i2c-mt7621 driver does. Signed-off-by: Sven Schwermer <sven.schwermer@arcor.de>
* uboot-envtools: move to Boot Loaders submenuAlberto Bursi2016-11-031-0/+1
| | | | | | Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ipq806x: TP-Link Archer C2600: convert old usbdev trigger to new usbportCezary Jackiewicz2016-11-031-2/+2
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ramips: add support for MikroTik hEX v3 (RB750Gr3)Andrew Yong2016-11-026-0/+137
| | | | | | | | | | | | | | The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz). RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot. Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware. The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices. A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware. Signed-off-by: Andrew Yong <me@ndoo.sg>
* dnsmasq: support log-dhcp optionKarl Palsson2016-11-021-0/+1
| | | | | | Helpful when trying to resolve issues with quirky dhcp client devices. Signed-off-by: Karl Palsson <karlp@etactica.com>
* kernel: update kernel 4.4 to version 4.4.30Stijn Segers2016-11-0232-73/+72
| | | | | | | | | | This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches. Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood. Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed by P. Wassi). Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* ramips: add usb packages into DIR-860L B1 profileStijn Segers2016-11-021-0/+1
| | | | | | | This patch adds the kmod-usb3 and kmod-usb-ledtrig-usbport packages to the DIR-860L B1 profile. The DIR-860L B1 has a USB 3 port. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* iproute2: rename ip to ip-tiny and let both ip-tiny and ip-full provide "ip"Jo-Philipp Wich2016-11-021-6/+7
| | | | | | | | | | | | | | | | | | Rename the "ip" package declaration to "ip-tiny" and let both "ip-tiny" and "ip-full" provide the virtual "ip" package. This allows users to freely choose the "ip" command variant while other packages can continue to depend on "ip" without needing to enforce a specific variant. Note that this commit does not add busybox as "ip" provider due to the following reasons: - The builtin Busybox ip applet cannot be added or removed at runtime - Both "ip-tiny" and "ip-full" are able to install without file clashes even if the busybox applet is enabled - The system is preferring full "ip-tiny" and "ip-full" at runtime, even if Busybox ip is still present. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/package-metadata.pl: honour DEFAULT_VARIANTJo-Philipp Wich2016-11-021-2/+15
| | | | | | | | | | | | So far, package-metadata.pl always considered the first provider of a virtual package to be the default variant which might deviate from what buildroot considers to be the default. Change the Kconfig dependency / select code generation for virtual package providers to consider the DEFAULT_VARIANT to be the primary provider and only fall back to the first provider if no default variant was explicitely tagged. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: uci-defaults: support requesting untagged switch port configurationJo-Philipp Wich2016-11-021-8/+14
| | | | | | | | | | | | | Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let board.d network files request default network switch configurations which do not use tagged CPU ports. This commit itself has no effect on generated configurations at the moment since we still emit untagged configurations by default but it allows boards to opt-out from default tagged configs in case we start emitting tagged settings by default. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include: properly update .install stamp filesJo-Philipp Wich2016-11-021-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the $(PKG_INSTALL_STAMP) files are only written if a package is selected as <*> but never deleted or emptied if the corresponding package is getting deselected. For ordinary packages this usually is no problem as the package/install recipe performs its own check for enabled packages when assembling the list of install stamp files to consider, but this logic might fail under certain circumstances for packages providing multiple build variants. In case of a multi-variant package, the buildroot first checks if any of the variants is enabled, then resolves all variants of the common source package and finally processes the corresponding .install stamp files of all variants, relying on the assumption that only the selected .install stamp file exists. When an initially selected variant is getting deselected or changed from <*> to <m> and another variant is marked as <*> instead, the .install stamp file of the deselected variant remains unchanged and a second .install stamp file for the newly selected variant is getting created, causing the package/install recipe to pick up two .install stamps with conflicting variants, leading to opkg file clashes. This issue happens for example if package "ip" is set to <m> and package "ip-full" to <*> - the install command will eventually fail with: * check_conflicts_for: The following packages conflict with ip: * check_conflicts_for: ip-full * * opkg_install_cmd: Cannot install package ip. In order to fix the problem, always process the removal requests or the .install stamp files, even for deselected packages but only write the package base name into the stamp file if the corresponding package is marked as builtin. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/package-metadata.pl: fix handling of virtual (PROVIDES) dependsJo-Philipp Wich2016-11-021-2/+2
| | | | | | | | | | | | Currently the code emitting dependencies for provide candidates is overwriting the specification calculated by the previous conditional dependency handling code, rendering dependencies on virtual PROVIDES packages in conjunction with conditional dependencies unusable. Instead of overwriting, append the PROVIDES dependency spec in order to fix using DEPENDS on virtual provider packages in conjunction with conditions. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* include/host-build.mk: use STAGING_DIR_HOSTPKGJo-Philipp Wich2016-11-011-1/+1
| | | | | | | Instead of hardcoding $(STAGING_DIR)/host, use the new $(STAGING_DIR_HOSTPKG) variable to refer to the directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rules.mk: add STAGING_DIR_HOSTPKG variableJo-Philipp Wich2016-11-011-0/+1
| | | | | | | Add a STAGING_DIR_HOSTPKG variable which refers to $(STAGING_DIR)/host in order to prepare support for relocating that directory in the future. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: add build-depends on util-linuxJo-Philipp Wich2016-11-011-0/+1
| | | | | | | The libblkid probe support in fstools git head requires blkid/blkid.h for compilation, so add a build dependency on util-linux which provides libblkid. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 08:05:28 +0000