aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: adding DWM-158 3g ModemGiuseppe Lippolis2016-12-141-0/+14
| | | | | | | | | This patch add the 3G modem DWM-158 to the usb-serial option driver. The DWM-158 is a pcie 3G modem. It is embedded in the DWR-512 modem supportet by lede. The patch has been submitted and merged in the upstream linux-next repository. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ar71xx: Add support for Netgear WNR2000v1Huan Truong2016-12-144-44/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
* ar71xx: Add ath10k-firmware-qca988x for DomyWifi DW33DJing Lin2016-12-141-1/+1
| | | | | | | The default package selection was missing the correct FW for ath10k to work. Signed-off-by: Jing Lin <mumuqz@163.com>
* procd: add support for service signalsJo-Philipp Wich2016-12-142-4/+4
| | | | | | | | | | | | | | | | Update procd to latest HEAD in order to introduce support for services signals: - Adds a new service.signal ubus call to send a kill() signal to one or all running instances of a given service - Adds a new "reload_signal" property which allows service init scripts to request procd to send a specific kill() signal on reload, instead of stopping and restarting running processes Also fixes some potential memory leaks reported by cppcheck and an environment variable corruption in the trace command. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netfilter: drop proprietary xt_id matchJo-Philipp Wich2016-12-145-356/+1
| | | | | | | | The xt_id match was used by the firewall3 package to track its own rules but the approach has been changed to use xt_comment instead now, so we can drop this nonstandard extension. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall3: drop support for automatic NOTRACK rulesJo-Philipp Wich2016-12-141-3/+3
| | | | | | | | | | | | Update to current HEAD in order to drop automatic generation of per-zone NOTRACK rules. The NOTRACK rules used to provide a little performance improvement but the later introduction of the netfilter conntrack cache made those rules largely unnecessary. Additionally, those rules caused various issues which broke stateful firewalling in some scenarios. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: kmod-hwmon-tmp102: add dependency to kmod-thermalHauke Mehrtens2016-12-141-1/+1
| | | | | | | Depend on the kmod-thermal package when it is activated, this fixes compile problems on some targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* odhcpd: Fix dnsmasq re-reading hostfileHans Dedecker2016-12-132-2/+5
| | | | | | | | | Depending on the dhcp uci config pidof dnsmasq can return multiple pids. Fix re-reading of the hostfile by dnsmasq in such case by sending SIGHUP signal to each of the returned pids. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: Specify directory /tmp/hosts as argument for --addn-hostsHans Dedecker2016-12-132-2/+2
| | | | | | | Let dnsmasq read all hosts files in /tmp/hosts directory by specifying /tmp/hosts as argument of --addn-host Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath10k: fix DMA allocation issuesFelix Fietkau2016-12-132-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh all patchesFelix Fietkau2016-12-1310-42/+39
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: add a RCU related bugfixFelix Fietkau2016-12-131-0/+65
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* download.mk: improve download tarball reproducibilityFelix Fietkau2016-12-131-1/+1
| | | | | | | Store only numeric user/group id. Group 0 is 'root' on linux and 'wheel' on BSD and Mac OS X. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* download.mk: remove code duplication in $(TAR) callFelix Fietkau2016-12-131-9/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* download.mk: use $(error) instead of a regular shell errorFelix Fietkau2016-12-131-1/+1
| | | | | | Useful for further rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport ubifs support for dirty_writeback_intervalRafał Miłecki2016-12-132-0/+148
| | | | | | | These patches were queued for 4.10. For possible use cases see added: [PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport missed BCM53573 ILP patch from 4.10Rafał Miłecki2016-12-133-13/+39
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump to 4.4.38Kevin Darbyshire-Bryant2016-12-137-19/+19
| | | | | | | | Bump & refresh patches for all 4.4 supported targets. Compile & run tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* bcm53xx: backport DTS patches accepted for 4.11Rafał Miłecki2016-12-138-160/+502
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* iproute2: support latest cake & restore DSCP washingKevin Darbyshire-Bryant2016-12-121-55/+75
| | | | | | | Support new packet overhead passing paradigm in cake qdisc, also restore DSCP wash/nowash keywords. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kmod-sched-cake: update & restore DSCP washingKevin Darbyshire-Bryant2016-12-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Track upstream changes, incl changes in packet overhead accounting (automatically taking care of linux' packet sizing knowledge), improvements to triple isolated DRR handling (new flow dominance), statistics tweak & allow more packet drops in stressed conditions. Under tests this has significantly improved latency control under 'many flows to one' scenarious as is typical of bittorrent and MS Windows update. I also restored 'DSCP washing' functionality in my repo which follows upstream closely (like a hawk!) with tc keywords 'wash/nowash'. This allows cake to limit/control packets in bands determined by a packet's DSCP but to clear those DSCP bits on qdisc egress. This functionality was originally removed as part of an attempt to push cake into the kernel, which hasn't actually happened as yet. A matching commit is required to iproute2/tc to support the new overhead handling, keyword changes as well as the 'wash/nowash' tweak. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* firmware-utils: tplink-safeloader: update support lists for CPE210/510/...Matthias Schiffer2016-12-121-4/+14
| | | | | | | Adds support for new EU and US variants; removes a few strings that were never actually used and have been removed from the stock firmwares. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: simplify model detection for TP-Link Pharos devicesMatthias Schiffer2016-12-121-19/+2
| | | | | | | This also makes the detection more flexible, as it doesn't need to check for each model explicitly. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mt76: update to the latest version, fixes dfs issuesFelix Fietkau2016-12-121-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tcpdump: reduce size of -mini by removing more infrequently used protocolsFelix Fietkau2016-12-121-23/+25
| | | | | | | | | | | This removes: - BGP - CDP - SCTP MIPS binary .ipk size is reduced from ~150k to ~130k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* net/utils/tcpdump: update to 4.8.1p-wassi2016-12-124-576/+700
| | | | | | Update tcpdump to upstream release 4.8.1 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* mbedtls: tune config to reduce size and improve performanceFelix Fietkau2016-12-121-5/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mbedtls: sync with polarssl configFelix Fietkau2016-12-121-9/+80
| | | | | | | One of those changes is re-enabling blowfish support to make openvpn-mbedtls compatible with common configurations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openvpn: quote parameters to --push in openvpn config fileMagnus Kroken2016-12-121-1/+2
| | | | | | | | | | | | | | OpenVPN requires arguments to --push to be enclosed in double quotes. One set of quotes is stripped when the UCI config is parsed. Change append_params() of openvpn.init to enclose push parameters in double quotes. Unquoted push parameters do not cause errors in OpenVPN 2.3, but OpenVPN 2.4 fails to start with unquoted push parameters. Fixes: FS#290. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* mbedtls: enable MBEDTLS_DHM_CMagnus Kroken2016-12-122-10/+1
| | | | | | | This option is required by OpenVPN, and OpenVPN 2.4 uses mbedTLS 2.x. DHM_C is also already enabled in the PolarSSL 1.3.x config.h. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ar71xx: remove obsolete flash chip locking codeFelix Fietkau2016-12-125-52/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove PB92 reference design board supportFelix Fietkau2016-12-1210-89/+0
| | | | | | | Due to flash size limitations, support for this board has not been functional for years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP113 reference design board supportFelix Fietkau2016-12-1212-106/+0
| | | | | | | Due to flash size limitations, support for this board has not been functional for years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP81 reference design board supportFelix Fietkau2016-12-1219-122/+10
| | | | | | This board is very old and unlikely to still be relevant today. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete duplicate driver source fileFelix Fietkau2016-12-121-294/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP83 reference design board supportFelix Fietkau2016-12-1219-690/+3
| | | | | | | | This board is very old and unlikely to still be relevant today. Support for it contains a significant amount of device specific baggage which is worth getting rid of. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: clean up spi controller related patchesFelix Fietkau2016-12-1223-667/+202
| | | | | | Remove various hacks for fast read, un-break device tree support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACKRafał Miłecki2016-12-121-0/+1
| | | | | | | | | | | There are many targets using user space scripts to generate firmware but bcm53xx doesn't need this, so let's disable that kernel option. This lets us avoid some scary-looking kernel warnings like: brcmfmac 0001:04:00.0: Falling back to user helper firmware brcm!brcmfmac43602-pcie.txt: firmware_loading_store: map pages failed Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: remove "init" kernel command line parameter from bootargsMartin Blumenstingl2016-12-1234-125/+2
| | | | | | | | | | /etc/preinit has been the default init-script for a very long time (at least since Linux 2.6.30 in OpenWrt). Remove the kernel command line "init" parameter to get rid of duplicate and inconsistent definitions of this parameter (some boards, like FRITZ3370 for example did not use it at all, while it's just copy and paste on others). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: specify console using stdout-path instead of cmdline argumentMartin Blumenstingl2016-12-1240-37/+70
| | | | | | | | Use devicetree's /chosen/stdout-path instead of the kernel command line (embedded in the .dts-files) to specify the serial console. Using the chosen node is recommended on devicetree based platforms. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* uboot-envtools: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-121-1/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for YunCore SR3200 and XD3200Piotr Dymacz2016-12-1212-4/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8337N. YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334. Common specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB or RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm - 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm SR3200 specification: - 5x 10/100/1000 Mbps Ethernet - 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips) - 3x LED (+ 5x LED in RJ45 sockets), 1x button - UART header on PCB XD3200 specification: - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) - 4x internal antennas - 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button - UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB LED for 5 GHz WLAN is currently not supported on both devices as it is connected directly to the QCA9882 radio chip. Flash instruction under vendor firmware, using telnet/SSH: 1. If your firmware does not have root password, go to point 5 2. Connect PC with 192.168.1.x address to LAN or WAN port 3. Power up device, enter failsafe mode with button (no LED indicator!) 4. Change root password and reboot (mount_root, passwd ..., reboot -f) 5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP 6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 7. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" - mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ca-certificates: update to version 20161130Christian Schoenebeck2016-12-121-2/+2
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* layerscape: add 64b/32b target for ls1046ardb deviceYutang Jiang2016-12-1220-3/+2574
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: fman-ucode: prefer github over git.freescale.comYutang Jiang2016-12-121-1/+1
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* layerscape: uboot-layerscape: prefer github over git.freescale.comYutang Jiang2016-12-1295-18498/+9
| | | | | | | In order to prevent the impact of the merger of the company and the potential rebase of the SDK repositories, migrate the u-boot source to github. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* base-files: Changed UCI variable name for GPIO value from 'default' to 'value'Julian Labus2016-12-121-1/+1
| | | | | | | | | | | This changes the UCI variable for the GPIO value from system.$cfg.default back to system.$cfg.value as it was before the change from uci-defaults [1] to board.d. /etc/init.d/gpio_switch [2] still expects the value to be in system.$cfg.value. [1] https://github.com/lede-project/source/blob/d65916047b44d6d157d88d15e8e3d92555c5e6f8/package/base-files/files/lib/functions/uci-defaults.sh#L197 [2] https://github.com/lede-project/source/blob/master/package/base-files/files/etc/init.d/gpio_switch#L17 Signed-off-by: Julian Labus <julian@labus-online.de>
* lantiq: falcon: remove bootargs-appendHauke Mehrtens2016-12-1010-40/+0
| | | | | | | This attribute is not evaluated any more and the boot loader on these reference boards does not provide a broken root= or console= parameter. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add TI tmp102 and tmp103 temperature sensorsHauke Mehrtens2016-12-101-0/+30
| | | | | | | This just adds the kmods for these kernel modules. This is found on some Lantiq / Intel reference boards. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add KERNEL_DEBUG_PINCTRL and KERNEL_DEBUG_GPIOHauke Mehrtens2016-12-101-0/+8
| | | | | | | | This makes it possible to activate the gpio and the pinctl debugging from LEDE menuconfig. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 17:24:15 +0000