aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* wolfssl: don't change ABI because of hw cryptoEneas U de Queiroz2022-06-091-10/+21
| | | | | | | | | Enabling different hardware crypto acceleration should not change the library ABI. Add them to PKG_CONFIG_DEPENDS after the ABI version hash has been computed. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 677774d445ced1a56e73fe62df47b4eb66441721)
* kernel: bump 5.10 to 5.10.120John Audia2022-06-079-12/+12
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit f800f8d6fc4f21ed87454aa657ebbf376dc3b6cf)
* kernel: bump 5.10 to 5.10.119John Audia2022-06-078-34/+9
| | | | | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit cd634afe6cb6565eb6865931c8d73d97cab3600a)
* kernel: bump 5.10 to 5.10.118John Audia2022-06-0710-131/+15
| | | | | | | | | | | | | | Removed upstreamed: generic-backport/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch generic-backport/774-v5.15-2-igc-remove-phy-type-checking.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b789a588b1c55fe1df7e2d6ae1c4f84b96a03a95)
* kernel: bump 5.10 to 5.10.117John Audia2022-06-0713-30/+30
| | | | | | | | | | | | | Removed upstreamed: backport-5.10/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 01a6a5c73120ccddd2a83381252ede91aac070f4)
* ksmbd: update to 3.4.5Rosen Penev2022-06-071-2/+2
| | | | | | | | | | | | Major changes are: Add support for smbd-direct multi-desctriptor. Add support for dkms. Add support for key exchange. Fix seveal bugs. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 95adbc24e73db8370b99636b3c98205c34d7e0dd)
* ath79: allow use GPIO17 as regular gpio on GL-AR300M devicesPtilopsis Leucotis2022-06-071-3/+3
| | | | | | | | | Small update to my previous path 'fix I2C on GL-AR300M devices'. This update allow using GPIO17 as regular GPIO in case it not used as I2C SDA line. Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com> (cherry picked from commit 493080815d2ba6e3b7740dbd45c44310935aeebc)
* ath79: ZTE MF286[,A,R]: use GPIO19 as ath9k LEDLech Perczak2022-06-071-14/+7
| | | | | | | | | | | | | With the pinctrl configuration set properly by the previous commit, the LED stays lit regardless of status of 2.4GHz radio, even if 5GHz radio is disabled. Map GPIO19 as LED for ath9k, this way the LED will show activity for both bands, as it is bound by logical AND with output of ath10k-phy0 LED. This works well because during management traffic, phy*tpt triggers typically cause LEDs to blink in unison. Link: <https://github.com/openwrt/openwrt/pull/9941> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 5ca45e0a21ee1bdafd3652e7e91a761a9cd0c838)
* ath79: ZTE MF286[,A,R]: fix WLAN LED mappingLech Perczak2022-06-071-0/+8
| | | | | | | | | | | The default configuration of pinctrl for GPIO19 set by U-boot was not a GPIO, but an alternate function, which prevented the GPIO hog from working. Set GPIO19 into GPIO mode to allow the hog to work, then the ath10k LED output can control the state of actual LED properly. Link: <https://github.com/openwrt/openwrt/pull/9941> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 82b59846368db85ad1470396d95e7c20157288eb)
* build: fix find warning with SCAN_EXTRALeo Chung2022-06-071-1/+1
| | | | | | | | | | | | | | | | | | | If you change SCAN_EXTRA variable with "-path target/linux/xxxx" in include/toplevel.mk for speed up scan, find will warn with: find: warning: you have specified the global option -maxdepth after the argument -path, but global options are not positional, i.e., -maxdepth affects tests specified before it as well as those specified after it. Please specify global options before other arguments. The find option -mindepth -maxdepth are global options and must be before any path option. Change order of $(SCAN_EXTRA) after -mindepth and -maxdepth to fix this. Signed-off-by: Leo Chung <gewalalb@gmail.com> [capitalize Description, Author and Sob and minor description tweak] Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> (cherry picked from commit eb787b5b9d8d45f3678b58eaa158bb4fa28d4418)
* kernel: fix crashes in bridge offload codeFelix Fietkau2022-06-071-5/+5
| | | | | | | - fix an issues when accessing the port pointer of an expired/invalid fdb entry Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 38a5b593ef9e94deedefb627f1952b3bb881df56)
* mac80211: add a bug fix for a rare crashFelix Fietkau2022-06-071-0/+38
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 9a93b62f315ad4c9f021c414ed80ba337ab4a01e)
* uboot-imx: fix wrong make flags overridingPetr Štetiar2022-06-071-2/+2
| | | | | | | | | | | | | | | | | | | | Buidbots are currently choking on the following compile error: In file included from tools/aisimage.c:9: include/image.h:1133:12: fatal error: openssl/evp.h: No such file or directory # include <openssl/evp.h> ^~~~~~~~~~~~~~~ compilation terminated. This is caused by a complete overriding of make flags which are provided correctly in `UBOOT_MAKE_FLAGS` variable, but currently overriden instead of extended. This then leads to the usage of build host include dirs, which are not available. Fix it by extending `UBOOT_MAKE_FLAGS` variable in all device recipes. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 481339a0426698adaa0254b479807efde0428de9)
* kernel: backport flow offload fixesRitaro Takenaka2022-06-072-1/+100
| | | | | | | | | | Some dst in IPv6 flow offload table become invalid after the table is created. So check_dst is needed in packet path. Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com> [Add patch for kernel 5.15 too and rename file] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit efff48529b5cdb4046b923bebee483c7c68755a7)
* bmips: dgnd3700v2: fix network configÁlvaro Fernández Rojas2022-06-071-0/+1
| | | | | | | | ucidef_set_bridge_device is needed for DGND3700v2 network config since VLAN 1 must be used for the switch to be correctly configured. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 90e4c8c6e6fe060d849a5b96bc7595345ce3d6ea)
* libubox: update to the latest versionFelix Fietkau2022-06-071-3/+3
| | | | | | | | | | f2d6752901f2 blob: clear buf->head when freeing a buffer 45210ce14136 list.h: add container_of_safe macro cfa372ff8aed blobmsg: implicitly reserve space for 0-terminator in string buf alloc d2223ef9da71 blobmsg: work around false positive gcc -Warray-bounds warnings Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 3e300e724b674b299d055d172a268c8cfa8489d2)
* ltq-vdsl-app: disconnect when service is stoppedJan Hoffmann2022-06-073-3/+78
| | | | | | | | | | | | | | | Stop the connection when the control daemon is terminated. The code is a modified version of the termination routine in version 4.23.1 of the daemon (which doesn't support VR9 modems anymore). This could also be implemented by calling the acos and acs commands via dsl_cpe_pipe.sh in the init script. However, doing it in the daemon itself has the advantage of also working if it is terminated in another way (for example during sysupgrade). Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit 1daaef31b35201a9c15a2084e25dac41b48c1867)
* ltq-vdsl/ltq-adsl: fix elapsed time calculationJan Hoffmann2022-06-074-2/+246
| | | | | | | | | | | | | | | | | | | | The driver maintains elapsed times by repeatedly accumulating the time since the previous update in a loop. For the elapsed showtime time, the time difference is truncated to seconds before adding it, leading to a sizable error over time. Move the truncation to before calculation of the time difference in order to remove this error. Also maintain the total elapsed time in the same way in full seconds, to prevent the unsigned 32-bit counter from wrapping around after about 50 days. Testing on a VR9 device shows that the reported line uptime now matches the actual elapsed wall time. The ADSL variant is only compile-tested, but it should also work as the relevant code is identical. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit db4bf4b968c0da035d98e7771fc993af9d6f742b)
* ltq-atm/ltq-ptm: avoid unnecessary build dependenciesJan Hoffmann2022-06-072-6/+11
| | | | | | | | | | | | | | Right now, both ltq-adsl-mei and ltq-vdsl-mei are always built, even when they aren't necessary for the selected variant. This can cause the build to fail, for example ltq-vdsl-mei doesn't build successfully here on xway target due to the vectoring callback. Make these dependencies conditional on the specific package variants, so they are only built when actually needed. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit 2f484aeff5fe5ba3a832f98ca409adde3257e832)
* ltq-vdsl-mei: add locking to interrupt handlerJan Hoffmann2022-06-072-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users noticed repeated resyncs at random intervals, which go away when the MEI driver is configured to use polling instead of interrupts. Debugging shows that this seems to be caused by concurrent calls to MEI_ReadMailbox (in the interrupt handler) and MEI_WriteMailbox. This appears to be mostly triggered when there is an interrupt for vectoring error reports. In polling mode, calls to MEI_ReadMailbox are protected by the same semaphore as is used in MEI_WriteMailbox. When interrupts are used, MEI_WriteMailbox appears to rely on MEI_DisableDeviceInt and MEI_EnableDeviceInt to provide mutual exclusion with the interrupt handler. These functions mask/unmask interrupts, and there is an additional check of the mask in the interrupt handler itself. However, this is not sufficient on systems with SMP, as the interrupt handler may be running in parallel, and could already be past the interrupt mask check at this point. This adds a lock to the interrupt handler, and also acquires this lock in MEI_DisableDeviceInt. This should make sure that after a call to MEI_DisableDeviceInt the interrupt is masked, and the interrupt handler is either not running, has alread finished its work, or is still before the interrupt mask check, and is thus going to detect the change. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu> (cherry picked from commit 17004245534731ab03c9a8683208e84d9c399979)
* ltq-vdsl-app: set MAC address for vectoring error reportsJan Hoffmann2022-06-071-6/+14
| | | | | | | | | | | | | This tells the modem about the WAN MAC address, which is used as source address for vectoring error reports that are generated by the firmware. It needs to be set early, as the MEI driver only actually writes the value to the modem when is in reset state (i.e. the firmware has been loaded, but connection has not started yet). Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu> (cherry picked from commit b35d33c8b8a7b96f06179982b5d944cde7234004)
* ltq-vdsl-mei: enable vectoring error sample callbackJan Hoffmann2022-06-072-13/+2
| | | | | | | | | This re-enables the vectoring error sample callback and adds a dependency to the corresponding driver. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu> (cherry picked from commit 93f0e1f922ec1351d429259db942f10147e624ff)
* ltq-vectoring: add driverJan Hoffmann2022-06-074-0/+349
| | | | | | | | | | | | | | | | | | | | | | | | | In order to calculate the required pre-distortion for downstream vectoring, the vectoring control entity (VCE) at the carrier office needs error samples from the modem. On Lantiq VR9 modems, error reports are generated by the firmware, but need to be multiplexed into the data stream by the driver on the main processor when L2 encapsulation is selected by the VCE. This driver provides the necessary callback function, which is called by the MEI driver after receiving an error report from the firmware. Originally, it is part of the Lantiq PPA driver, but after a few changes it also works with the PTM driver used in OpenWrt. The direct call to ndo_start_xmit needs to be replaced, as the PTM driver relies on locks from the kernel. Instead dev_queue_xmit is used, which is called from a work queue, as it is not safe to call from an interrupt handler. Additional changes include fixes to support recent kernel versions and a change of the used interface from ptm0 to dsl0. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jan Hoffmann <jan@3e8.eu> (cherry picked from commit f872b966092ece5c0e2192e0d979a9eb69283f17)
* realtek: add gpio-restart for D-Link DGS-1210-28Luiz Angelo Daros de Luca2022-06-071-0/+6
| | | | | | | | | A GPIO assert is required to reset the system. Otherwise, the system will hang on reboot. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit a2817ce96f17db3a5af77837ae5733b47182ae0d)
* realtek: add reset button for D-Link DGS-1210-28Luiz Angelo Daros de Luca2022-06-071-0/+18
| | | | | | | | Tested in a DGS-1210-28 F3, both triggering failsafe and reboot. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit b85f59b726442621efb95153ff60b8767723feca)
* packages: nvram: add NVRAM quirks for bcm53xx targetArınç ÜNAL2022-06-074-17/+48
| | | | | | | | | | | | Add NVRAM quirks script for the bcm53xx target. Split NVRAM quirks for the bcm47xx and bcm53xx targets. Move clear partialboot NVRAM quirk for Linksys EA9500 here. Add set wireless LED behaviour quirk for Asus RT-AC88U. Use boot() instead of start() as nvram commands are meant to be executed only once, at boot. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit f4e219fd5e6cfa33d234dad134fb105cc1620f54)
* bcm53xx: add support for Asus RT-AC88UArınç ÜNAL2022-06-072-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the integrated Broadcom and the external Realtek switch. Hardware info: * Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB * DDR3 RAM: 512 MB * Flash: 128 MB (ESMT F59L1G81LA-25T) * 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * Ports: 8 Ports, 1 WAN Ports Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> [rmilecki: mark BROKEN until we sort out nvram & CFE recovery] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 72b9b721d707b7f70109eb70b2a9f22449ceba08)
* realtek: add support for ZyXEL GS1900-24ERaylynn Knight2022-06-063-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24E is a 24 port gigabit switch similar to other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24E * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB Macronix MX25L12835F * RAM: 128 MiB DDR2 SDRAM Nanya NT5TU128M8GE * Ethernet: 24x 10/100/1000 Mbps * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 24 ethernet port link/activity LEDs (green, SoC controlled) * Buttons: 1 "RESET" button on front panel * Switch: 1 Power switch on rear of device * Power 120-240V AC C13 * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB. Pinout (front to back): + Pin 1 - VCC marked with white dot + Pin 2 - RX + Pin 3 - TX + PIn 4 - GND Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware * Select the HTTP radio button * Select the Active radio button * Use the browse button to locate the realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin file and select open so File Path is updated with filename. * Select the Apply button. Screen will display "Prepare for firmware upgrade ...". *Wait until screen shows "Do you really want to reboot?" then select the OK button * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24E is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot from the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24e-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade -n /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24e-squashfs-sysupgrade.bin it may be necessary to restart the network (/etc/init.d/network restart) on the running initramfs image. Signed-off-by: Raylynn Knight <rayknight@me.com> (cherry picked from commit b515ad10a6e1bd5c5da0ea95366fb19c92a75dea)
* ramips: use hotplug script for EAP615-Wall MACsStijn Tintel2022-06-062-2/+4
| | | | | | | | | | | | | | Using nvmem-cells to set the MAC address for a DBDC device results in both PHY devices using the same MAC address. This in turn will result in multiple BSSes using the same BSSID, which can cause various problems. Use the hotplug script for the EAP615-Wall instead to avoid this. Fixes: a1b8a4d7b3ff ("ramips: support TP-Link EAP615-Wall") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-By: Andrew Powers-Holmes <aholmes@omnom.net> (cherry picked from commit ce90ba1f3168e3f4581fd8581e2c0cd31efa14cf)
* tools/mkimage: increase tmpfile name length limitDaniel Golle2022-06-051-0/+11
| | | | | | | | | mkimage limits the length of the file paths in can deal with to 256 characters. Turns out that in automated builds by asu we break this limit, so increase it to 1024 characters. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 3fbf9689b652e230e21bbc7ab2a9b8c936bd6e80)
* fstools: update to git HEADDaniel Golle2022-06-051-3/+3
| | | | | | | 93369be Revert "fstools: remove SELinux restorecon hack" Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b641dadc1386146c4213ff6c5c443bad053a85d6)
* ubus: update to git HEADDaniel Golle2022-06-051-4/+4
| | | | | | | | 2f793a4 lua: add optional path filter to objects() method 2bebf93 ubusd: handle invoke on event object without data Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 1521d5f453683ca1aae87d025d2892901369ce0c)
* netifd: update to git HEADDaniel Golle2022-06-051-3/+3
| | | | | | | | 2e1fcf4 netifd: fix hwmode for 60g band 39ef9fe interface-ip: fix memory corruption bug when using jail network namespaces Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 7eb83b20159aadeeb5ca4679bdb428bd3052f19c)
* procd: update to git HEADDaniel Golle2022-06-051-3/+3
| | | | | | | | 557c98e init: selinux: don't relabel virtual filesystems 7a00968 init: only relabel rootfs if started from initramfs Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 4cbc26b212836973b22ae2a426de43325f893ee3)
* netifd: update to the latest versionFelix Fietkau2022-06-051-3/+3
| | | | | | | | 4b4849cf5e5a interface-ip: unify host and proto route handling 507c0513d176 interface-ip: add support for excluding interfaces in host route lookup Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 24cc341fdc917460721e7c09708f5676c1361c91)
* uqmi: update to git HEADDaniel Golle2022-06-051-3/+3
| | | | | | | | 56cb2d4 nas: add decoding of cell_id 9a9019a uqmi: wms - added storage to read text messages Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 51c442c265a8661427441193e7dc585b1539a915)
* ipq40xx: add Aruba AP-365 specific BDFDavid Bauer2022-06-024-1/+12
| | | | | | | | | | | | | | Aruba deploys a BDF in the root filesystem, however this matches the one used for the DK04 reference board. The board-specific BDFs are built into the kernel. The AP-365 shows sinificant degraded performance with increased range when used with the reference BDF. Replace the BDF with the one extracted from Arubas kernel. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit b21b98627dcd6c1868d13964f6d84e8d43ae9ef7)
* malta: use default OpenWrt network configurationHauke Mehrtens2022-06-021-13/+0
| | | | | | | | | | | | | | | | | Currently malta configures the first Ethernet device as WAN interface. If it finds a second one it will configure it as LAN. This commit reverses it to match armvirt and x86. If there is only one network device it will be configured as LAN device now. If we find two network devices the 2. one will be WAN. If no board.d network configuration is given it will be configured in package/base-files/files/etc/board.d/99-default_network Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [minor typos] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit fb1ba922026a4b7d04ef5c8058f7890ed7b790e6)
* firewall4: update to latest Git HEADJo-Philipp Wich2022-06-011-3/+3
| | | | | | | | | | | | | | | 210991d fw4: prefer /dev/stdin if available 4e5e322 fw4: make `fw4 restart` behavior more robust 221040e ruleset: emit time ranges when both start and stop times are specified 30a7d47 fw4: fix datetime parsing fb9a6b2 ruleset: correct mangle_output chain type 6dd2617 fw4: fix logic flaw in testing hw flow offloading support c7c9c84 fw4: ensure that negative bitcounts are properly translated c4a78ed fw4: fix typo in emitted set types Fixes: #9764, #9923, #9927, #9935, #9955 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit a7ddef6ef122a935d6bdf38d7ead686b12738007)
* ucode: update to latest Git HEADJo-Philipp Wich2022-06-011-3/+3
| | | | | | | | | | | | d996047 syntax: adjust number literal parsing and string to number conversion 9efbe18 lib: refactor `uc_int()` da3f089 lib: rework uc_index() implementation 559029e ci: make jobs faster during pull request testing Fixes: #9923 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commits 251e70c88725fb33960ca60202dd55a84ae6b4d7 and 7f998088f01baf0da24a9fd20de5d5389023361a)
* ath79: fix label MAC address for D-Link DIR-825B1Sebastian Schaper2022-05-291-0/+1
| | | | | | | | The label MAC address for DIR-825 Rev. B1 is the WAN address located at 0xffb4 in `caldata`, which equals LAN MAC at 0xffa0 incremented by 1. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> (cherry picked from commit 4bed263af7a13cb4b9401f7ae04f788cfcc234f7)
* OpenWrt v22.03.0-rc3: revert to branch defaultsHauke Mehrtens2022-05-275-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v22.03.0-rc3: adjust config defaultsv22.03.0-rc3Hauke Mehrtens2022-05-275-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: NanoBeam M5 fix target_devicesJan-Niklas Burfeind2022-05-212-2/+2
| | | | | | | | | | | Update the name of for the Ubiquiti NanoBeam M5 to match the auto-generated one at runtime. Otherwise sysupgrade complains about mismatching device names. This also required renaming the DTS. Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit 21a3ce97d571ef28a25754549503bab61a79faf2)
* ath79: add support for Ubiquiti NanoBeam M5Jan-Niklas Burfeind2022-05-212-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ubiquiti NanoBeam M5 devices are CPE equipment for customer locations with one Ethernet port and a 5 GHz 300Mbps wireless interface. Specificatons: - Atheros AR9342 - 535 MHz CPU - 64 MB RAM - 8 MB Flash - 1x 10/100 Mbps Ethernet with passive PoE input (24 V) - 6 LEDs of which four are rssi - 1 reset button - UART (4-pin) header on PCB Notes: The device was supported by OpenWrt in ar71xx. Flash instructions (web/ssh/tftp): Loading the image via ssh vias a stock firmware prior "AirOS 5.6". Downgrading stock is possible. * Flashing is possible via AirOS software update page: The "factory" ROM image is recognized as non-native and then installed correctly. AirOS warns to better be familiar with the recovery procedure. * Flashing can be done via ssh, which is becoming difficult due to legacy keyexchange methods. This is an exempary ssh-config: KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms ssh-rsa PubkeyAcceptedKeyTypes ssh-rsa User ubnt The password is ubnt. Connecting via IPv6 link local worked best for me. 1. scp the factory image to /tmp 2. fwupdate.real -m /tmp/firmware_image_file.bin -d * Alternatively tftp is possible: 1. Configure PC with static IP 192.168.1.2/24. 2. Enter the rescue mode. Power off the device, push the reset button on the device (or the PoE) and keep it pressed. Power on the device, while still pushing the reset button. 3. When all the leds blink at the same time, release the reset button. 4. Upload the firmware image file via TFTP: tftp 192.168.1.20 tftp> bin tftp> trace Packet tracing on. tftp> put firmware_image.bin Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit 4cd3ff8a79738fa503150e52162c7df6d9bd3534)
* OpenWrt v22.03.0-rc2: revert to branch defaultsPaul Spooren2022-05-214-9/+7
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* OpenWrt v22.03.0-rc2: adjust config defaultsv22.03.0-rc2Paul Spooren2022-05-214-7/+9
| | | | Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath79: add support for MikroTik hAP (RB951Ui-2nD)Maciej Krüger2022-05-216-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik hAP (product code RB951Ui-2nD) is an indoor 2.4Ghz AP with a 2 dBi integrated antenna built around the Atheros QCA9531 SoC. Specifications: - SoC: Atheros QCA9531 - RAM: 64 MB - Storage: 16 MB NOR - Winbond 25Q128FVSG - Wireless: Atheros QCA9530 (SoC) 802.11b/g/n 2x2 - Ethernet: Atheros AR934X switch, 5x 10/100 ports, 10-28 V passive PoE in port 1, 500 mA PoE out on port 5 - 8 user-controllable LEDs: · 1x power (green) · 1x user (green) · 4x LAN status (green) · 1x WAN status (green) · 1x PoE power status (red) See https://mikrotik.com/product/RB951Ui-2nD for more details. Notes: The device was already supported in the ar71xx target. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Maciej Krüger <mkg20001@gmail.com> (cherry picked from commit 5ce64e0646fcd5c4f374b4de898b591560c32e18)
* ath79: add support for MikroTik RouterBOARD hAP ac liteThibaut VARÈNE2022-05-217-0/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RB952Ui-5ac2nD (sold as hAP ac lite) is an indoor 2.4Ghz and 5GHz AP/router with a 2 dBi integrated antenna. See https://mikrotik.com/product/RB952Ui-5ac2nD for more details. Specifications: - SoC: QCA9533 - RAM: 64MB - Storage: 16MB NOR - Wireless: QCA9533 802.11b/g/n 2x2 / QCA9887 802.11a/n/ac 2x2 - Ethernet: AR934X switch, 5x 10/100 ports, 10-28 V passive PoE in port 1, 500 mA PoE out on port 5 - 6 user-controllable LEDs: - 1x user (green) - 5x port status (green) Flashing: TFTP boot initramfs image and then perform sysupgrade. The "Internet" port (port number 1) must be used to upload the TFTP image, then connect to any other port to access the OpenWRT system. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 2bd33e8626bd04fd7115ee1a42aaf03aae2fffb8)
* firewall4: update to latest Git HEADJo-Philipp Wich2022-05-201-3/+3
| | | | | | | | | | | | | | | | | | | | c22eeef fw4: support negative CIDR bit notation 628d791 hotplug: reliably handle interfaces with ubus zone hints d005293 fw4: store zone associations from ubus in statefile as well b268225 fw4: filter non hw-offload capable devices when resolving lower devices 57984e0 fw4: always resolve lower flowtable devices 7782017 tests: fix mocked `fd.read("line")` api 72b196d config: remove restictions on DHCPv6 allow rule f0cc317 fw4: refactor family selection for forwarding rules b0b8122 treewide: use modern syntax 05995f1 fw4: fix emitting device jump rules for family restricted zones b479815 fw4: fix family auto-selection for config nat rules 2816a82 ruleset: ensure that family-agnostic ICMP rules cover ICMPv6 as well 2379c3d tests: add test coverage for zone family selection logic Fixes: #5066, #9611, #9765, #9854 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 2df17604a4f891447beb66988e3d83e23ab3a3b0)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 10:24:17 +0000