aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add label MAC address for Mikrotik RB750Gr3Sven Roederer2019-12-231-3/+1
| | | | | | | | | | | | The device label contains: E01: 74:4D:28:xx:xx:30 E05: 74:4D:28:xx:xx:34 The first value corresponds to the address set in hard_config 0x10. That one is taken for the label MAC address. Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
* ramips: simplify state_default/pinctrl0 in device DTS filesAdrian Schmutzler2019-12-23295-1941/+1355
| | | | | | | | | The node pinctrl0 is already set up in the SOC DTSI files, but defined again as member of pinctrl in most of the device DTS(I) files. This patch removes this redundancy for the entire ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix *-gpio-custom module unloadingSungbo Eo2019-12-234-6/+6
| | | | | | | | | | | | | | | | | | | | | Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* rpcd: add respawn paramFlorian Eckert2019-12-232-1/+2
| | | | | | | | | | The rpcd service is an important service, but if the service stops working for any reason, no one will ever respawn that service. With this commit, the procd service will monitor if the rpcd service is running. If the rpcd service has crashed, then procd respawns the rpcd service. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* cmake: Install host packages to lib instead of lib64Rosen Penev2019-12-231-0/+1
| | | | | | | | | Several CMake packages such as log4cplus and protobuf(-c) install to lib64 instead of lib on some hosts. This completely breaks rpath linking. Override it globally to avoid fixing each package individually. Signed-off-by: Rosen Penev <rosenp@gmail.com> Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
* adb: fix for SuperSpeed devicesBjørn Mork2019-12-233-2/+41
| | | | | | | | | | | | | | The USB descriptor parsing in adb fails to detect SuperSpeed devices because of the SuperSpeed Endpoint Companion Descriptor. This cherry-picks the upstream fix for the problem. Unfortunately there never were a release with this fix before the conversion to C++, so upgrading to a newer version isn't an option. This makes adb work with SuperSpeed devices like the Sierra Wireless EM7565. Tested and verified. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ca-certificates: provide ca-certs by both ca-certificates and ca-bundleMaxim Storchak2019-12-231-2/+4
| | | | | | | | | - both packages provide ca-certs - make ca-bundle the default provider This should allow easy transition between these two forms of CA certificates storage Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
* libcxx: Add packageRosen Penev2019-12-234-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in OpenWrt, there are two libc++: libstdcpp and uClibc++. The former is huge and the latter supports only C++98 with some basic support for C++11. Those C++ versions seem to be specific to the compiler version libcxx supports C++11 and above while being much smaller than libstdcpp. On mt7621, these are the sizes of the ipks that I get: libstdcpp: 460786 libcxx: 182881 uClibc++:67720 libcxx is faster than uClibc++ and is under active development as part of the LLVM project while uClibc++ is effectively dead. This PR modifies uclibc++.mk to expose the make menuconfig option. Further cleanup is beyond the scope of this PR. What that means is, this is not used by default. A g++-libcxx wrapper based on the uClibc++ one was added. Works the same way. Compile tested with all packages that use uclibc++.mk in their Makefiles under mipsel_24kc. kismet fails compilation but that package needs to be cleaned up and updated. Runtime tested with gddrescue, gdisk, dcwapd, bonnie++, and aircrack-ng on a TP-Link Archer C7v2. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iperf: Fix compilation with libcxxRosen Penev2019-12-232-1/+13
| | | | | | Avoids redefining bool. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: build proper VMDK formats for ESXI 6.5John Sommerville2019-12-231-0/+6
| | | | | | | | | | | | | | | | | | | | | VMWare ESXI 6.5 and above is not compatible with subformat=monolithicSparse (The default qemu-img convert -O VMDK option). Monolithic Sparse vmdk can be imported, but issues occur when running sysupgrade with new images and other tasks that modify the file system (issues like Kernel panics, reboot loops, sometimes crashing the Host ESXI box). This change creates an additional VMDK output file for ESXI that sets the subformat to monlithicFlat, and the adapter_type to the SCSI lsilogic controller. This change existed back on: 25e36d379e73d64d6316fae9dc841c5ef28980f1 But it looks like the change was removed when refactoring occurred with: 5f6a2732f892b6229473576d89cc963ae9c97d5d Signed-off-by: John Sommerville <jsommerville@untangle.com>
* tools: qemu: Add patches to support adapter_type and monolithicFlatBrett Mastbergen2019-12-2312-0/+2340
| | | | | | | Its way more trouble to update this to a newer version of qemu than it is to backport the two additional features we need. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* scripts/dowload.pl: add archive.apache.org to apache mirror listJiri Kastner2019-12-231-0/+1
| | | | | | | | apache mirrors holds only latest releases, to download older releases, one must use archive.apache.org to get them. Signed-off-by: Jiri Kastner <cz172638@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesStefan Lippers-Hollmann2019-12-231-20/+20
| | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * No changes to wave-1, but I make a version .014 copy anyway to keep the makefile in sync. The release notes since last time for wave-2: * December 16, 2019: Wave-2 has a fix to make setting txpower work better. Before setting the power was ignored at least some of the time (it also appeared to work mostly, so I guess it was being correctly set in other ways). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* linux-firmware: update to 20191215DENG Qingfang2019-12-233-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20191215 git log --pretty=oneline --abbrev-commit 20190815..20191215 eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware c523dcd WHENCE: Add raspberry-pi4 SDIO file 99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware 2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4 4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware e10ed21 qcom: update venus firmware files for v5.4 af4c4be cxgb4: Update firmware to revision 1.24.11.0 f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B 212e441 qcom: Add SDM845 Compute DSP firmware ec84cf9 qcom: Add SDM845 Audio DSP firmware 62d0a1a qcom: Add SDM845 modem firmware e8a0f4c rtl_nic: add firmware rtl8168fp-3 9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware 978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0 c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201 6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200 84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560 96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260 7319341 amdgpu: update navi14 vcn firmware b363d9d amdgpu: update navi10 vcn firmware f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware 4debf21 i915: Add HuC firmware v7.0.3 for TGL 1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL 4b0a210 i915: Add HuC firmware v9.0.0 for EHL 610fe75 i915: Add GuC firmware v33.0.4 for EHL 11bdc57 rtw88: RTL8723D: add firmware file v48 9e194c7 qed: Add firmware 8.40.33.0 4065643 amdgpu: add new navi14 wks gfx firmware for 19.30 d4f88ea amdgpu: update navi14 firmware for 19.30 ea755b6 amdgpu: update raven firmware for 19.30 340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201 ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308 e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308 b27d123 rtl_nic: add firmware files for RTL8153 180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU 0acd93e bnx2x: Add FW 7.13.15.0. 2b016af linux-firmware: Update AMD cpu microcode 4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200 7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201 fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560 b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260 aa95e90 amdgpu: add initial navi14 firmware form 19.30 c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant. 7d187ac ice: Fix up WHENCE entry and symlink 4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware 7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24 c054c53 nvidia: Add XUSB firmware for Tegra194 9cfefbd Remove duplicate symlinks 2de7abd copy-firmware: Create symlinks from WHENCE file 2116bcd Make symlinks consistent c0590d8 amdgpu: update vega20 ucode for 19.30 43cc648 amdgpu: update vega12 ucode for 19.30 ffa0ed7 amdgpu: update vega10 ucode for 19.30 83e1b41 amdgpu: update picasso ucode for 19.30 7008617 amdgpu: update raven2 ucode for 19.30 9200baa amdgpu: update raven ucode for 19.30 f25a39c amdgpu: add new raven rlc firmware 9ae61e7 ice: Add package file for Intel E800 series driver 417a9c6 amdgpu: add initial navi10 firmware 702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware 3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware 3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake 60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake 2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton 38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake 8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL 51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL 88ea23e qcom: add firmware files for Adreno a630 6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201 6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware d45c950 nvidia: Add XUSB firmware for Tegra186 65c6595 Add symlinks for Tegra VIC firmware binaries 0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1 f667c00 rtl_nic: add firmware rtl8125a-3 fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201 2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory. 7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC 65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 40e4162 iwlwifi: update FWs to core45-152 release c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4 665001a linux-firmware: Update firmware file for Intel Bluetooth AX200 c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201 b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560 fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260 ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Added missing symbolic links to Makefile] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAMEJeffery To2019-12-231-0/+30
| | | | | | | | | | | | | | | | | | This backports the patch for GCC PR target/89587 (gcc's rs6000 configuration unconditionally sets MULTIARCH_DIRNAME, even when multiarch is disabled). This currently affects apm821xx and may cause issues when cross-compiling packages, e.g. Python 3[1]. This includes patches for GCC 8 (with the changelog diff removed); this change is already included in GCC 9.2 and 7.5. [1]: https://github.com/openwrt/packages/issues/10552 Signed-off-by: Jeffery To <jeffery.to@gmail.com> [Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain/gcc: correct the check expr for newer clangYorkie Liu2019-12-231-1/+1
| | | | | | | This fixes gcc build error within clang 11.0, it tweaks the version string from LLVM to clang. Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com>
* lantiq: enable 5ghz wifi on VR200/VR200vKevin Schmidt2019-12-232-3/+22
| | | | | | Enable mt76 driver on VR200/VR200v. Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
* lantiq: fix phys ledAleksander Jan Bajkowski2019-12-231-2/+2
| | | | | | | | led2l and led2h value is incorrectly set by led3l and led3h. Bug was introduced in commit: 863e79f8d5544a8a884375d7e867f350fddca9b9 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Fixes: 863e79f8d554 ("lantiq: add support for kernel 4.9")
* uhttpd: reset PKG_RELEASEJo-Philipp Wich2019-12-221-1/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: update to latest Git HEADJo-Philipp Wich2019-12-221-3/+3
| | | | | | 5f9ae57 client: fix invalid data access through invalid content-length values Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fstools: update to latest git HEADJo-Philipp Wich2019-12-221-3/+3
| | | | | | | b4e25d5 libblkid-tiny: fix symbol collision with full libblkid Fixes: FS#2691, FS#2692 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix MAC address setup for Xiaomi MiWiFi NanoSungbo Eo2019-12-222-2/+2
| | | | | | | | MAC addresses are stored in factory partition at: 0x0004: WiFi 2.4GHz (label_mac +1) 0x0028: LAN, WAN (label_mac) Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: further improve support for Xiaomi MiWiFi NanoSungbo Eo2019-12-221-15/+13
| | | | | | | | | | | | | | | | | This patch does the following: - prepend vendor name to model - set status LEDs to follow the behavior in stock FW - simplify state_default node definition - use generic name for flash node Stock FW status indicators: https://files.xiaomi-mi.com/files/Mi_Router_Wi-Fi_Nano/Mi_router-NANO_EN.pdf > Yellow: power on / off > Blue: during normal operation > Red: in case of problems with the operation of the device Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* openvpn: update to 2.4.8Magnus Kroken2019-12-225-6/+129
| | | | | | | | | | Backport two upstream commits that allow building openvpn-openssl without OpenSSLs deprecated APIs. Full changelog: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24#OpenVPN2.4.8 Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* lantiq: move include to parent falcon_lantiq_easy98000.dtsiAdrian Schmutzler2019-12-224-6/+2
| | | | | | | This moves the include of lantiq.dtsi from the DTS files to the parent falcon_lantiq_easy98000.dtsi. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: remove ar9_lantiq_easy50810.dtsAdrian Schmutzler2019-12-221-73/+0
| | | | | | This file seems to be orphaned, no device setup existing for it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: use soc_vendor_device scheme on DTS fileAdrian Schmutzler2019-12-2290-99/+98
| | | | | | | | | | | | This renames lantiq DTS(I) files to follow soc_vendor_device scheme. This will make DTS files easier to maintain. As a side effect, DTS file name can be derived from device node names now, only having to specify a SOC variable in Makefiles. While at it, move files to arch/mips/boot/dts/lantiq subfolder. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: split device definitions into filesAdrian Schmutzler2019-12-227-851/+838
| | | | | | | This splits device definitions into several *.mk files to increase overview. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: dts: assign the ASC pins to the serial controller nodeMartin Blumenstingl2019-12-223-8/+9
| | | | | | | | Assign the ASC pins to the serial controller node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: assign the PCI pins to the PCI controller nodeMartin Blumenstingl2019-12-2227-260/+213
| | | | | | | | Assign the PCI pins to the PCI controller node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: assign the STP pins to the STP GPIO controller nodeMartin Blumenstingl2019-12-2211-68/+36
| | | | | | | | Assign the STP pins to the STP GPIO controller node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: assign the GPHY LED pins to the Ethernet controller nodeMartin Blumenstingl2019-12-227-54/+71
| | | | | | | | Assign the GPHY LED pins to the Ethernet controller node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: assign the NAND pins to the nand-controller nodeMartin Blumenstingl2019-12-2216-85/+112
| | | | | | | | | | | | Assign the NAND pins to the NAND controller node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. While here, define all NAND pins (CLE, ALE, read/RD, ready busy/RDY and CE/CS1). This means that the pinctrl subsystem knows that these pins are in use and cannot be re-assigned as GPIOs for example. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: define the SPI pins in {amazonse,ar9,vr9}.dtsiMartin Blumenstingl2019-12-2212-141/+66
| | | | | | | | | Define the SPI pins in the corresponding SoCs.dtsi and assign them to the SPI controller node. All known boards use CS4 and it's likely that this is hardcoded in bootrom so this doesn't bother with having per-board SPI pinmux settings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: assign the MDIO pins to the gsw nodeMartin Blumenstingl2019-12-2219-80/+27
| | | | | | | | | | | | Assign the MDIO pins to the switch node instead of using pin hogging (where pins are assigned to the pin controller). This is the preferred way of assigning pins upstream. This converts amazonse, ar9 and vr9. danube is skipped because the pin controller doesn't define a pinmux for the MDIO pins (some of the SoC pads may be hardwired to the MDIO pins instead of being configurable). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ramips: further DTS improvements for Edimax RG21SAdrian Schmutzler2019-12-221-8/+6
| | | | | | | | | | This fixes the state_default node by setting the correct groups and inheriting &state_default from parent DTSI directly. The compatible for the wifi nodes is changed to the more generic mediatek,mt76. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add eth0 MAC address for Edimax RG21SAdrian Schmutzler2019-12-222-1/+3
| | | | | | | | | | | | | | | So far, lan/wan MAC address for Edimax RG21S are only read using mtd_get_mac_ascii, so eth0.1 and eth0.2 addresses are set, but eth0 address is random. Since the device's LAN address is the same as for 2.4 GHz, though, this patch set's the eth0 address based on the 2.4 GHz one, which can be extracted by mtd-mac-address. This will also allow to move the label MAC address setup to DT. The setup of lan_mac and wan_mac are kept in 02_network, so those locations are still in use, too. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58USungbo Eo2019-12-222-48/+2
| | | | | | RT-AC58U has single USB 3.0 port, and only usb3_port1 is actually used. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: improve ASUS RT-AC58U supportSungbo Eo2019-12-224-20/+26
| | | | | | | | | | | | | | | | | | | | This patch does the following: - move WiFi LED setup to DTS - fix LAN/WAN MAC addresses and add label MAC address - wan5G -> wlan5G, power -> led_power - increase flash SPI frequency to 30MHz MAC addresses are stored in Factory partition at: 0x1006: WiFi 2.4GHz, WAN (label_mac) 0x5006: WiFi 5GHz, LAN (label_mac +4) By improving flash speed, `time dd if=/dev/mtdblock8 of=/dev/null bs=2k` is reduced from 7m 10.26s to 5m 9.52s. Using higher frequencies did not improve speed further. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: fix MAC address setup for TL-WDR4300 boardSungbo Eo2019-12-212-1/+5
| | | | | | | | | | | | | | | | | The current ethernet MAC address setup of TL-WDR4300 board is different from the setup of stock firmware: OpenWrt: lan = label_mac -2, wan = label_mac -2 stock: lan = label_mac, wan = label_mac +1 This patch applies to all devices using TL-WDR4300 board: TL-WDR3600 v1 TL-WDR4300 v1 TL-WDR4300 v1 (IL) TL-WDR4310 v1 Mercury MW4530R v1 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300Sungbo Eo2019-12-212-1/+6
| | | | | | | | | | | | | | | | | | | | | | | The current ethernet MAC address setup of TL-WDR4300 board is different from the setup of stock firmware: OpenWrt: lan = label_mac -2, wan = label_mac -2 stock: lan = label_mac, wan = label_mac +1 The full address assignment is as follows: LAN label WAN label + 1 5G label 2G label - 1 This patch changes all devices using TL-WDR4300 board: TL-WDR3600 v1 (checked on device) TL-WDR4300 v1 (checked on device) TL-WDR4300 v1 (IL) Signed-off-by: Sungbo Eo <mans0n@gorani.run> [rephrase/extend commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: add support for Aruba AP-303David Bauer2019-12-209-1/+469
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4029 RAM: 512M DDR3 FLASH: - 128MB NAND (Macronix MX30LF1G18AC) - 4MB SPI-NOR (Macronix MX25R3235F) TPM: Atmel AT97SC3203 BLE: Texas Instruments CC2540T attached to ttyMSM0 ETH: Atheros AR8035 LED: WiFi (amber / green) System (red / green) BTN: Reset To connect to the serial console, you can solder to the labled pads next to the USB port or use your Aruba supplied UARt adapter. Do NOT plug a standard USB cable into the Console labled USB-port! Aruba/HPE simply put UART on the micro-USB pins. You can solder yourself an adapter cable: VCC - NC D+ - TX D- - RX GND - GND The console setting in bootloader and OS is 9600 8N1. Voltage level is 3.3V. To enable a full list of commands in the U-Boot "help" command, execute the literal "diag" command. Installation ------------ 1. Get the OpenWrt initramfs image. Rename it to ipq40xx.ari and put it into the TFTP server root directory. Configure the TFTP server to be reachable at 192.168.1.75/24. Connect the machine running the TFTP server to the ethernet port of the access point. 2. Connect to the serial console. Interrupt autobooting by pressing Enter when prompted. 3. Configure the bootargs and bootcmd for OpenWrt. $ setenv bootargs_openwrt "setenv bootargs console=ttyMSM1,9600n8" $ setenv nandboot_openwrt "run bootargs_openwrt; ubi part aos1; ubi read 0x85000000 kernel; bootm 0x85000000" $ setenv ramboot_openwrt "run bootargs_openwrt; setenv ipaddr 192.168.1.105; setenv serverip 192.168.1.75; netget; set fdt_high 0x87000000; bootm" $ setenv bootcmd "run nandboot_openwrt" $ saveenv 4. Load OpenWrt into RAM: $ run ramboot_openwrt 5. After OpenWrt booted, transfer the OpenWrt sysupgrade image to the /tmp folder on the device. 6. Flash OpenWrt: $ ubidetach -p /dev/mtd1 $ ubiformat /dev/mtd1 $ sysupgrade -n /tmp/openwrt-sysupgrade.bin To go back to the stock firmware, simply reset the bootcmd in the bootloader to the original value: $ setenv bootcmd "boot" $ saveenv Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: add BDF for Aruba AP-303David Bauer2019-12-202-0/+2
| | | | | | The BDF originates from the vendor-firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix USB LED for Belkin F9K1109v1Sungbo Eo2019-12-201-1/+1
| | | | | | | | | | | | | | Device support for Belkin F9K1109v1 was added using set_usb_led() although this was removed in 772b27c20736 ("ramips: set F5D8235 v1 usb led trigger via devicetree"). Use ucidef_set_led_usbport() instead. Fixes: f2c83532f92c ("ramips: add support for Belkin F9K1109v1") Signed-off-by: Sungbo Eo <mans0n@gorani.run> [rephrase commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* fstools: update to latest git HEADRafał Miłecki2019-12-201-3/+3
| | | | | | | | | | | | 111a43f libblkid-tiny: vfat: Change parsing label in special cases f43a1aa libblkid-tiny: vfat: Fix reading labels which starts with byte 0x05 157924d libblkid-tiny: add blkid_probe_set_id_label() stub 0c5761f libblkid-tiny: use separated buffer for each block device read b82c5c1 libblkid-tiny: add functions for allocating & freeing probe struct 12851d6 blockd: don't flush devices list on "hotplug" call 5ea47fe blockd: fix vlist memory corruption Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sunxi: rename SUNXI_SOC to SOCAdrian Schmutzler2019-12-204-38/+37
| | | | | | | This replaces SUNXI_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: rename MTK_SOC to SOCAdrian Schmutzler2019-12-207-321/+320
| | | | | | | This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: rename ATH_SOC to SOCAdrian Schmutzler2019-12-208-174/+173
| | | | | | | This replaces ATH_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: add SOC device variableAdrian Schmutzler2019-12-201-1/+2
| | | | | | | | | This creates the device variable SOC and adds it to DEFAULT_DEVICE_VARS. It is supposed to replace target-specific SOC variables like ATH_SOC or MTK_SOC and thus unify variable names across targets. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: harmonize line breaks in image MakefilesAdrian Schmutzler2019-12-208-138/+187
| | | | | | | | | | | | | | | | This harmonizes the line wrapping in image Makefile device definitions, as those are frequently copy-pasted and are a common subject of review comments. Having the treatment unifying should reduce the cases where adjustment is necessary afterwards. Harmonization is achieved by consistently (read "strictly") applying certain rules: - Never put more than 80 characters into one line - Fill lines up (do not break after 40 chars because of ...) - Use one tab for indent after wrapping by "\" - Only break after pipe "|" for IMAGE variables Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:31:26 +0000