aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: refresh kernel 5.10 configRafał Miłecki2021-07-291-76/+12
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add testing support for kernel 5.10Rafał Miłecki2021-07-2932-1/+2357
| | | | | | | | | | | | | | | | It still requires fixing PCIe support: [ 6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges: [ 6.652217] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff] [ 6.661833] OF: /axi@18000000/pcie@12000: Missing device_type [ 6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12 [ 6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges: [ 6.681514] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff] [ 6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12 [ 6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges: [ 6.705048] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff] [ 6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix bgmac compilation in kernel 5.10Rafał Miłecki2021-07-291-1/+1
| | | | | | | It's required since upstream kernel commit 4bdc0d676a64 ("remove ioremap_nocache and devm_ioremap_nocache"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: fix compile-error for non-mtd platformsDavid Bauer2021-07-296-14/+16
| | | | | | Fixes commit cd39aba402ea ("generic: write back netdev MAC-address to device-tree") Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: write back netdev MAC-address to device-treeDavid Bauer2021-07-296-54/+112
| | | | | | | | | | | | The label-mac logic relies on the mac-address property of a netdev devices of-node. However, the mac address can also be stored as a different property or read from e.g. an mtd device. Create this node when reading a mac-address from OF if it does not already exist and copy the mac-address used for the device to this property. This way, the MAC address can be accessed using procfs. Signed-off-by: David Bauer <mail@david-bauer.net>
* fstools: update to git HEADDaniel Golle2021-07-281-3/+3
| | | | | | | 46d02c2 block: don't add non-ubifs ubi devices cc63933 blockd: send mount.ready when startup has completed Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: fix JT-OR750i switch LED assignmentDavid Bauer2021-07-281-2/+2
| | | | | | | The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate the LED on port 3 and vice versa. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: enable missing pinmux for JT-OR750iDavid Bauer2021-07-281-0/+3
| | | | | | | Without explicit configuration of these pins the ethernet as well as status LED of the device do not work correctly. Signed-off-by: David Bauer <mail@david-bauer.net>
* Revert "generic: add mac-address property for NVMEM mac addresses"David Bauer2021-07-282-118/+0
| | | | | | | | | | | | | | This reverts commit b30924873062be47250e6b872347461c8221688d. This commit could create a property without allocated memory, breaking subsequent reads over a nodes property. Also, the mac-address-increment was not applied when reading from nvmem. Revert this commit for now, which breaks the label-mac-address logic. Possibly, traversing the device-tree from the netdev side is easier anyways. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for Joy-IT JT-OR750iVincent Wiemann2021-07-285-0/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM * 802.11n 2T2R (external antennas) * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas) * 3x 10/100 LAN, 1x 10/100 WAN * UART header with pinout printed on PCB Installation: * The device comes with a bootloader installed only * The bootloader offers DHCP and is reachable at http://10.123.123.1 * Accept the agreement and flash sysupgrade.bin * Use Firefox if flashing does not work TFTP recovery with static IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server at 192.168.0.66 * Keep the reset button pressed for 4 seconds after connecting power TFTP recovery with dynamic IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server with a DHCP server running at the same address * Keep the reset button pressed for 6 seconds after connecting power Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
* hostapd: add missing chunk for the snoop interface fixFelix Fietkau2021-07-281-4/+7
| | | | | Fixes: 7b46377a0cd9 ("hostapd: make the snooping interface (for proxyarp) configurable") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: make proxyarp work with libnl-tinyFelix Fietkau2021-07-281-0/+275
| | | | | | Remove a dependency on libnl3-route Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix a segfault on sta disconnect with proxy arp enabledFelix Fietkau2021-07-281-0/+19
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: make the snooping interface (for proxyarp) configurableFelix Fietkau2021-07-282-0/+35
| | | | | | | Use the VLAN interface instead of the bridge, to ensure that hostapd receives untagged DHCP packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-07-261-3/+3
| | | | | | 440eb0647708 bridge: fix regression in bringing up bridge ports Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: Fix Fidelix-FM35X1GA patchHauke Mehrtens2021-07-251-2/+2
| | | | | | | | This patch did not apply cleanly any more after support for the XTX flash was added to the generic patches. Fixes: 92012dd8677a ("kernel: Add support for XTX XT26G02A SPI NAND") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: update to git HEADHauke Mehrtens2021-07-251-2/+2
| | | | | | f26233e watchdog: Add an info message if the watchdog reset the system Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arm-trusted-firmware-mvebu: switch to CZ.NIC's Secure FirmwareAndre Heider2021-07-256-0/+215
| | | | | | | | | | | | | | | | | CZ.NIC as part of Turris project released free and open source WTMI application firmware wtmi_app.bin for all Armada 3720 devices. This firmware includes additional features like access to Hardware Random Number Generator of Armada 3720 SoC which original Marvell's fuse.bin image does not have. Add a patch which allows to pass the commit id, so the firmware is able to identify itself, see a04bffeb. Add a patch to disable linking with gold, since the ARM toolchain doesn't ship gold. Cherry-pick the 3 post-release fixes. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update CM3 toolchain to v10.2Andre Heider2021-07-251-12/+12
| | | | | | | Linaro stopped shipping binary toolchains quite some time ago, switch over to the ARM builds. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update mv-ddr-marvell to current masterAndre Heider2021-07-251-3/+3
| | | | | | | | | | | | | 02e23db fix compilation errors popped up by GCC-10 7c35173 Merge pull request #29 from pali/sync-a38x-uboot bb734f5 mv_ddr: a38x: Use SOC_REGS_PHY_BASE for INTER_REGS_BASE ee1ea84 mv_ddr: a38x: Fix ddr3 compilation 70f3e2e mv_ddr: Fix comment typo dd960b4 mv_ddr: ddr3: Allow boards to specify CK_DELAY parameter a87f4f7 mv_ddr: ddr3: only use active chip-selects when tuning ODT 3defcec mv_ddr: a38x: Add support for setting timing in hws_topology_map Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update a3700-tools to current masterAndre Heider2021-07-252-8/+9
| | | | | | | | | | | | | | | | | | | 2efdb10 wtmi: Fix calculation of UART divider 4247e39 fix: twin die ddr porting guide 8ad7992 sys_init: Add missing newlines in debug mode 4ddea19 avs: Validate VDD value from OTP c444aeb avs: Fix description for avs value 0x2e 1915b78 tim: Optimize code generated by gettimver.sh and print newline 21f566d tim: Print mv_ddr version and configuration on UART 840b70b tim: Use variable $DDRFILE where possible c10e6ae tim: Fix waiting for UART TX ready 7bf95cf wtmi: Wait 3ms for the TX on UART to be empty prior resetting TX FIFO 63e8433 wtmi: Add "dirty" suffix to git commit and rebuild sys_init.bin binary when VERSION changes e949b58 wtmi: During setup clock phase print CPU and DDR speed 10376b5 wtmi: Flush output on UART after the '\n' character 509c647 Makefile: Check that specified DDR_TOPOLOGY option is valid Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: update to v2.5Andre Heider2021-07-256-4/+441
| | | | | | | | | | | Revert to using the checked in `tbb_linux` image tool binary since building it drags in the rather big Crypto++ project. Cherry-pick the post-release UART fixes. Switch to AUTORELEASE while at it. Signed-off-by: Andre Heider <a.heider@gmail.com>
* arm-trusted-firmware-mvebu: remove unpacked sources upon cleanAndre Heider2021-07-251-0/+7
| | | | | | These are all unpacked in the Build/Prepare step, clean up accordingly. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-mvebu: update to v2021.07Andre Heider2021-07-252-4/+4
| | | | | | | Refresh the patches. Switch to AUTORELEASE while at it. Signed-off-by: Andre Heider <a.heider@gmail.com>
* uboot-envtools: mvebu: update uci defaults for Turris OmniaMarek Behún2021-07-251-1/+4
| | | | | | | | | | | | | From version 2021.09 U-Boot will fixup Turris Omnia's DTB before booting, separating U-Boot's environment into separate MTD partition "u-boot-env" [1]. Check if "u-boot-env" MTD partition exists and set the uci defaults accordingly. [1] https://lists.denx.de/pipermail/u-boot/2021-July/455017.html Signed-off-by: Marek Behún <marek.behun@nic.cz>
* mvebu: limit mvneta tx queue workaround to 32 bit SoCTomasz Maciej Nowak2021-07-252-4/+12
| | | | | | | | | | | | This patch has been carried since introduction throughout every kernel major bump and no one has tested if the later kernels improved the situation. The Armada 3720 SoC can only process GbE interrupts on Core 0 and this is already limited in all stable kernels, so ditch this workaround for 64 bit SoCs. Ref: https://git.kernel.org/torvalds/c/cf9bf871280d Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* layerscape: armv8_64b: enable Microsemi phy driver for FRWY-LS1046AMartin Schiller2021-07-251-0/+1
| | | | | | | | | Enable the Microsemi phy driver to support the VSC8514 QSGMII phy on the FRWY-LS1046A board. Otherwise, the "Generic PHY" driver is used. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: fix config restore for FRWY-LS1046AMartin Schiller2021-07-251-0/+1
| | | | | | | | | commit 2c2d77bd3bd4 ("layerscape: add FRWY-LS1046A board support") missed to add an entry to the 79_move_config preinit script. Therefore, the config transfer on sysupgrade wass broken for this device. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* Revert "realtek: Fix failsafe mode"Thomas Nixon2021-07-252-19/+0
| | | | | | | | | This reverts commit b7ee0786b56d1088c195fe7c1cdb1ad7d20c9245. With the previous commit "realtek: remove rtl83xx vlan 1 special cases" this is no longer required. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* realtek: remove rtl83xx vlan 1 special casesThomas Nixon2021-07-251-6/+5
| | | | | | | | | | | | On reset, the PVID of all ports is set to 1; if this is reset to 0, the special cases for VLAN 1 are no longer required. port_vlan_add is called with vid=0 when the DSA port interfaces are enabled with no VLAN; previously the VLAN was not configured in this case, relying on VLAN 1 being present, but with the PVID set to 0, configuring VLAN 0 as normal works as expected. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* linux-firmware: add 2G and 5G precal binaries for QCA99X0Damien Mascord2021-07-251-0/+35
| | | | | | | | | | | Some devices (such as Extreme Networks WS-AP3959i-ROW) do not contain precal binaries in ART, and the precal in the cards eeprom causes firmware load errors. These firmware files were previously in linux-firmware, so these are adding them back and renaming to be cleaner. Signed-off-by: Damien Mascord <tusker@tusker.org>
* elfutils: fix building with GCC 11Rui Salvaterra2021-07-251-0/+22
| | | | | | | Add a patch to fix building with GCC 11, which triggers new warnings by enabling -Warray-parameter by default. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* toolchain/binutils: add binutils 2.37Rui Salvaterra2021-07-256-0/+90
| | | | | | Tested on ath79/generic, without issues. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel/generic: sort the 5.10 kconfig symbolsRui Salvaterra2021-07-251-3/+3
| | | | | | Sort the kernel configuration using scripts/kconfig.pl. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel/generic: add a missing symbol to the 5.10 kconfigRui Salvaterra2021-07-251-0/+1
| | | | | | | | Add CONFIG_HAVE_ARM_ARCH_TIMER (disabled). A make kernel_oldconfig on cortexa9 will otherwise prompt for its selection. The 5.4 configuration already contains the same symbol. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.134John Audia2021-07-2510-23/+24
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.133John Audia2021-07-2526-87/+66
| | | | | | | | | | | | | | | Manually rebased: pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.52Rui Salvaterra2021-07-255-16/+7
| | | | | | | | | Add the new CONFIG_BATTERY_RT5033 to the generic configuration, as reported by Paul Blazejowski. Resort the kconfig while at it. No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: Add support for XTX XT26G02A SPI NANDFelix Matouschek2021-07-252-0/+373
| | | | | | This chip is used on Teltonika RUTX boards. Signed-off-by: Felix Matouschek <felix@matouschek.org>
* kernel: backport workaround for Realtek RTL8672 and RTL9601C chipsVladimir Markovets2021-07-2514-37/+392
| | | | | | | | | | | | | | Adds support for GPON SFP modules based on the Realtek RTL8672 and RTL9601C chips, including but not limited to: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 Signed-off-by: Vladimir Markovets <abam_a@yahoo.com>
* kernel/generic: fix the arm gc-sections patchRui Salvaterra2021-07-252-16/+20
| | | | | | | | | | | | | | | | | | Latest binutils (2.37) exposed a long-standing bug. The kernel linking stage would break at the SORTTAB step, due to the exception table having been previously purged from vmlinux, as its section wasn't marked as unconditionally kept. Fix thusly. Additionally, the "#define ARM_MMU_DISCARD(x) KEEP(x)" change is bogus. It would only apply to !CONFIG_MMU devices (which we don't support in OpenWrt), and it would even break the build if referenced. Drop it. While at it, rename the patch in order to make it obvious that it's arm-specific. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [Add same changes for kernel 5.4 too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netifd: update to the latest versionFelix Fietkau2021-07-251-3/+3
| | | | | | | 85f01c44a950 bridge: check bridge port vlan membership on link-up events 17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to git HEADDaniel Golle2021-07-251-3/+3
| | | | | | | 772292e uxc: don't restart containers when mount shows up 3a9d910 uxc: resolve volume UUIDs by name of UCI fstab section Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: import patch to fix spiNick Hainke2021-07-241-0/+54
| | | | | | | | | | | | | | | | | | | | | | | The patch fixes the fifo rx mode for the mt7623. It is already accepted upstream for Linux Kernel 5.15. To test the spi we can change the dts file to &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>; status = "okay"; spidev: spidev@0 { compatible = "linux,spidev"; spi-max-frequency = <1000000>; reg = <0>; }; }; Afterwards we should see a spidev device under /dev/. To test it we can further use spidev-test. Signed-off-by: Nick Hainke <vincent@systemli.org>
* fstools: update to git HEAD (again)Daniel Golle2021-07-241-3/+3
| | | | | | | a846c6b blockd: fix length of timeout int passed to ioctl 1d681ca block: support umount device basename Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2021-07-241-3/+3
| | | | | | | | | | 59f7c11 blockd: create mountpoint parent folder if needed 9cc96af Revert "block: resolve /dev/mapper/* name for /dev/dm-0 when hotplugging" 06334ac Revert "blockd: detect mountpoint of /dev/mapper/*" 9ab3551 block: use /dev/dm-* instead of /dev/mapper/* 5114595 block: allow remove hotplug event to arrive at blockd Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: fix mediatek and dsa not detecting mac-addr from nvmemAnsuel Smith2021-07-234-0/+144
| | | | | | | | Nvmem require the device node to be registered with the of_platform. Register the device node so that nvmem can correctly find the dev and correctly load the mac-addr stored in the nvmem cell declared in the dts. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: add missing symbol to kmod-qlcnicStijn Tintel2021-07-231-1/+2
| | | | | | | | When the kmod-qlcnic package is built on targets that have CONFIG_PCI_IOV enabled, the CONFIG_QLCNIC_SRIOV symbol is exposed. Enable this symbol in the kmod package to fix its build. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: mt7621: remove bring up DSA master init scriptDENG Qingfang2021-07-231-20/+0
| | | | | | | With commit 2e17c710954b, there is no need to bring up DSA master port manually. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* ath79: kernel: Add missing quote to drivers/mfd/KconfigPaul Blazejowski2021-07-232-2/+2
| | | | | | | | | | | | | | A missing quote in target/linux/ath79/patches-5.x/920-mikrotik-rb4xx.patch produces: ... scripts/kconfig/conf --syncconfig Kconfig drivers/mfd/Kconfig:2016:warning: multi-line strings not supported ... This patch adds missing closing quote, fixing the above warning. Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 11:14:29 +0000