aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bmips: dgnd3700-v2: fix ethernetÁlvaro Fernández Rojas2021-03-163-0/+91
| | | | | | | This is a temporary workaround to get the ethernet working, since external switch is connected by MDIO and it needs additional work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: backports: mt7530: fix TRGMII mode after resetIlya Lipnitskiy2021-03-164-6/+174
| | | | | | | | | | Backport upstream patch that fixes TRGMII mode now that mt7530 is actually resetting the switch on ramips devices. Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both. Fixes: 69551a244292 ("ramips: manage low reset lines") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* x86/legacy: fix subtarget CPU for kernel 5.10Tony Ambardar2021-03-151-0/+5
| | | | | | | | | | | | The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit generic subtarget. However, the legacy subtarget arch wasn't set to the older 586MMX, defaulting instead to the i686. Explicitly set the subtarget arch and refresh the subtarget config, as done already with the old geode subtarget. Fixes: 8391781389 ("x86: support kernel 5.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bcm4908: backport first PHY 5.13 patchesRafał Miłecki2021-03-152-3/+43
| | | | | | | 1. Upstream accepted version of Kconfig change 2. Documentation binding fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: mt7622: drop duplicate DEVICE_PACKAGESDaniel Golle2021-03-151-1/+1
| | | | | | | | kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part of the target's default package set. No need to add them again for buffalo_wsr-2533dhp2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-159-0/+564
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: support non standard trx magic valuesHauke Mehrtens2021-03-154-0/+196
| | | | | | | | | | | Buffalo uses the TRX format with a different magic, add support for this. It is planned to send these patches upstream. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd: add option for TRX magic to fixtrxINAGAKI Hiroshi2021-03-153-6/+17
| | | | | | | | | | | | Buffalo uses the TRX header with a different magic and even changes this magic with different devices. This change allows to specify the header to use as a command line argument. This is needed for the Buffalo WSR-2533DHP2 based on mt7622. Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: otrx: allow own magicHauke Mehrtens2021-03-151-2/+13
| | | | | | | | | This allows to specify an own magic instead of using the default magic value TRX_MAGIC. If no own magic is specified the default one will be used. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix mtk parallel nand driverHauke Mehrtens2021-03-151-0/+36
| | | | | | | | This fixes some bugs in the mtk parallel nand driver introduced in 5.10. This patch was send upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: replace threaded NAPI implementation in 5.10 with upstream backportFelix Fietkau2021-03-1515-395/+639
| | | | | | This uses a kthread per NAPI instance instead of the workqueue approach Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-03-151-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id 7e1eff676257 mt76: mt7915: fix unused 'mode' variable 8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence 27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update] fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update] bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI 1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation 9002b0b30aed mt76: mt7615: add rx checksum offload support 8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload 8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work 760adce29100 mt76: mt7921: fix aggr length histogram 84229a51845a mt76: mt7915: fix aggr len debugfs node 10a95da23cb7 mt76: mt7921: remove unneeded semicolon 2856dc8fb57e mt76: mt7921: fix stats register definitions 1b245e57549d mt76: mt7615: fix TSF configuration 1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211 8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211 ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt 28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap 8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start 5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC 58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC 76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens 7de0a0654054 mt76: mt7915: fix CSA notification for DBDC e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens 477b78301879 mt76: mt7915: fix PHY mode for DBDC 37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1 29a04583aecb mt76: mt7915: fix rxrate reporting a4307e6ba054 mt76: mt7915: fix txrate reporting 256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops 638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops 975cccfa96da mt76: mt7663: fix when beacon filter is being applied aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation 0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic 00628061b546 mt76: mt7615: add missing capabilities for DBDC 2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy() 6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg 3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure 9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine. e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine 7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine e0708e296e27 mt76: mt7921: add wifi reset support 87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration cc933b3669f7 mt76: mt7921: remove redundant check on type ca22cc221ae7 linux-firmware: add firmware for MT7921 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport upstream patches for driver disconnectFelix Fietkau2021-03-156-15/+593
| | | | | | Needed for an mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: prereq: drop support for Python 3.5Andre Heider2021-03-152-7/+5
| | | | | | | | | | | | | | | | | | | | The final Python 3.5 release was 3.5.10 in September 2020 [0]. This release series is now End-of-Life (EOL). The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04, which will be EOL in April 2021 [1]. The meson build system bumped their python requirement to 3.6 for the 0.57.0 release. This patch ensures that OpenWrt can update meson while still relying on the host python. [0] https://www.python.org/dev/peps/pep-0478/#id4 [1] https://ubuntu.com/about/release-cycle [2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36 Signed-off-by: Andre Heider <a.heider@gmail.com> [python3.6+ in README.md] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts,ipkg-build: use realpath for pkg_dirPaul Spooren2021-03-141-1/+1
| | | | | | | This allows manual execution of the ipkg-build script even with releative path. Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts,ipkg-build: apply shellcheckPaul Spooren2021-03-141-41/+40
| | | | | | | | | | | This commit cleans the `ipkg-build` script via changes suggested by shellcheck. These are mostly word splitting issues. Remove the definition of GZIP, this adds three "lookups" of the `gzip` binary but the rest of the build system doesn't seem to use such improvements neither. Signed-off-by: Paul Spooren <mail@aparcar.org>
* gettext-full: disable nameless locale defineRosen Penev2021-03-142-5/+5
| | | | | | | It seems some packages like transmission and json-glib fail with it enabled. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* opkg: update to git HEADDaniel Golle2021-03-151-3/+3
| | | | | | 5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-141-3/+3
| | | | | | d3a63b3 libopkg: add option to strip ABI versions from listed names Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: also install production image to eMMCDaniel Golle2021-03-141-2/+5
| | | | | | | Make installation to eMMC more convenient on the BPi-R64 by also copying the production image (if valid) from SD Card to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: clean up image buildDaniel Golle2021-03-141-22/+13
| | | | | | | | | | | | | * clean up whitespace to make GPT partitioning more readable * don't select packages already part of the target default selection * don't select U-Boot variants (breaks ImageBuilder) * don't select AHCI on boards without SATA * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices work fine with the in-SoC XHCI host having just kmod-usb3 installed. * select kmod-btmtkuart for devices with Bluetooth support * sort DEVICE_PACKAGES Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: select matching U-Boot for boardDaniel Golle2021-03-141-9/+15
| | | | | | | Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firmware-utils/ptgen: remove unused variable assignmentDaniel Golle2021-03-141-1/+0
| | | | | | | | | | | | | | | | Discovered by coverty: CID 1473630: Code maintainability issues (UNUSED_VALUE) Assigning value from "type_to_guid_and_name(type, &name)" to "part_guid" here, but that stored value is overwritten before it can be used. Remove the now redundant assignment of part_guid which is also set conditionally later on. Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: use accepted 5.13 DTS patchesRafał Miłecki2021-03-1412-50/+238
| | | | | | | | | | | | Some patches were slightly cleaned up. One things worth mentioning is that adding: phy-mode = "rgmii" broke SF2 driver. It made it access random register breaking switch setup. That's why this commit also adds a quick sf2 fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport first 5.13 DTS changesRafał Miłecki2021-03-143-1/+476
| | | | | | | This adds NVMEM bindings that are needed for proper booting on Linksys devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* x86: support kernel 5.10Tony Ambardar2021-03-1411-1/+1890
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add linux 5.10 as testing kernel, copy generic/subtarget configs and target patches from 5.4. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: update target patches for kernel 5.10 Refresh all patches while also dropping: 800-hwmon-w83627ehf-dont-claim-nct677x.patch which is now upstreamed as: 3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh 5.10 target config Refresh config using "make kernel_oldconfig". Signed-off-by: Tony Ambardar <itugrok@yahoo.com> x86: refresh and test all subtarget configs Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget". Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic. Build-tested only: x86/geode. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [squashed commits] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: support new mdio_devres.ko module in 5.10Tony Ambardar2021-03-142-4/+22
| | | | | | | | | Add kmod-mdio-devres package and kernel config symbol, and update related kmod-r8169 and kmod-ixgbe package dependencies. Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: add missing config symbols for 5.10Tony Ambardar2021-03-141-0/+6
| | | | | | Update generic config to add missing options that prompt during builds. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bmips: minor ethernet driver cleanups and fixesÁlvaro Fernández Rojas2021-03-141-62/+35
| | | | | | Add some minor ethernet driver cleanups and fixes to improve code quality. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: reorganize patchesÁlvaro Fernández Rojas2021-03-148-0/+0
| | | | | | Rename and reorganize backported patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-143-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: Add generic zyxel_gs1900 image definitionHauke Mehrtens2021-03-141-13/+13
| | | | | | | Add a new common device definition for the Zyxel GS1900 line of switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* selinux-policy: update to version v0.8Dominick Grift2021-03-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3d7da7a igmpproxy tidy some loose ends c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf 5a18967 adds igmpproxy skeleton 7e6a218 logread: support resolving dns names e39ca8b netifd: add support for /etc/udhcpc.user 7952bd0 odhcp6c: support /etc/odhcp6c.user ba0eb4e swconfig, fwenv, agent 4556b8a pppd cosmetic 9324d9d pppd: sends AT commands to model using /dev/ttyUSBN 417b14a ttydev: add some more ttyUSB ed739dc example: dont depend on policycoreutils 97613f9 dropbear: using dropbear as scp: dns name resolving 12c193b dropbear tcp connect ssh ports for scp c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional 8c5de35 this is a bug 8d5c463 uhttpd rcboot rcdnsmasq 094266e hostapd and wpa_supplicant aef0bd7 mountroot: maintains /tmp/sysupgrade.tar 24f0406 dropbear: allow it to read tmp.fs files 2901433 firstboot mkfsf2fs rcboot 2c4afb7 blockmount mmc 465ca98 adds industrial i/o (iio) nodedev 82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon 7df78bd ubus: "support" older ubusd versions that run as root 4458bce swconfig: allow using terminal (to print output) e8d606d sslcert: openssl linked: this shaves off 200 bytes 93afffb jshn ntpdhotplug 0b847f0 wpad: reads /etc/ssl/openssl.cnf f14ee34 indent fix a0c7cad mtd, uhttpd, ubus and ntpdhotplug d74f98f adds a not about checkreqprot requirement in some scenarios affacce example: add policycoreutils-setfiles for make check 4f944dc kmodloader and fwenv: efe36a3 netifd: adds a comment/reminder 581b087 more fw_printenv loose ends 30177a4 fw_setenv: needs mtd write access to set and delete env da28f4c fw_printenv: some minor clean ups a062053 fw_printenv missing rules 244ba5f blockmount: extroot and /rwm 0745a6a squid: allow squid to run sslcrtd with domain transition b851df6 squid fix 8c55acd squid: adds certfile and allow connect http but... b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid) 5ff39bd squid: forgot about luci 5366c97 squid/rcsquid some basic fill in 8743da6 squid skeleton 687a43b adds squid 3128 port to httpproxy port Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* bmips: add experimental ethernet supportÁlvaro Fernández Rojas2021-03-1420-1/+2401
| | | | | | | | | | | | | | | | | | This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268. BCM6358 needs a different driver, so there's no support for now. Working devices: - Comtrend AR-5315u - Comtrend AR-5387un - Comtrend VR-3025u - Comtrend VR-3032u Not working devices: - Netgear DGND3700 v2 (no idea on how the external switch is connected) - Huawei HG556a ver B (BCM6358 needs a separate driveer) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tools/libelf: remove unneeded host libraryTony Ambardar2021-03-133-258/+1
| | | | | | | | | | | | | | | | | | | | This old ELF library dating to 2009 used to be necessary on MacOS but is not required for building the kernel or tools since [1]. On Linux systems, libelf is already an OpenWRT build-system prerequisite [2]. Presence of the older library can mask or conflict with the system libelf and lead to build errors, as seen compiling Linux kernels since v5.8 or host tools such as dwarves (e.g. pahole). Remove the unnecessary tools/libelf library and avoid the related issues. [1] 5f8e587240 ("build: force disable stack validation during kernel build on non-linux systems") [2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites Tested-by: Rosen Penev <rosenp@gmail.com> (Linux) Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS) Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* elfutils: remove host build from target packageTony Ambardar2021-03-131-2/+0
| | | | | | | | | | | | | Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host library to fix a glib2 host build error, but this need was later removed by b6212c8769 ("glib2: don't use libelf during host build"). More importantly, there are already two sources for libelf host libraries: OpenWRT build prerequisites [1] and tools/libelf. A third is not needed. Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* busybox: backport fixes for 1.33.0Hannu Nyman2021-03-133-1/+67
| | | | | | | | Backport two fixes for 1.33.0 * history file storing * traceroute command option parsing Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uboot-mediatek: import fix for AHCI and enable SATADaniel Golle2021-03-132-2/+26
| | | | | | | | Import patch form Frank Wunderlich <frank-w@public-files.de> to fix build of MediaTek AHCI SATA driver. Enable that driver on Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: LS421DE: make cosmetics changes in dts fileDaniel González Cabanelas2021-03-131-5/+11
| | | | | | | | | Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS: - Delete pointless #xxx-cells - bootargs: replace earlyprintk with earlycon and remove unneeded args. - Separate pinmux nodes with empty lines. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* xfrm: simplify the check for necessary kernel supportAlin Nastac2021-03-132-2/+2
| | | | | | | [ -d /sys/module/xfrm_interface ] is enough to check if CONFIG_XFRM_INTERFACE support was enabled in kernel. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* vti: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-3/+3
| | | | | | | When necessary support is built in kernel, vti protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* gre: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-5/+3
| | | | | | | When necessary support is built in kernel, gre protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* kernel: bump 5.10 to 5.10.23Kabuli Chana2021-03-1310-104/+18
| | | | | | | | | | | | update kernel to 5.10.23, rebase patches, deleted upstreamed patch: target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch compile / test - mvebu / mamba, rango Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> [refresh again] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.105John Audia2021-03-1317-253/+17
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed generic-backports: 830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64] [squash patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: image: don't use 'M' unit as dd may not support thatDaniel Golle2021-03-131-2/+2
| | | | | | | | | dd on Mac OS X apparently fails when using 'M' unit for bs. dd: bs: illegal numeric value Use 'k' unit instead for 'pad-to' to fix that. Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix build on Mac OS XDaniel Golle2021-03-131-0/+10
| | | | | | | Copy patch added to uboot-sunxi by commit 3cc57ba462 ("uboot-sunxi: add missing type __u64") also to uboot-mediatek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm47xx: make WGT634U NVRAM patch apply againRafał Miłecki2021-03-121-19/+9
| | | | | Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add compatibility with upstream threaded NAPI patchFelix Fietkau2021-03-122-12/+41
| | | | | | | Enable threading if dev->threaded is set. This will be used to bring mt76 back in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update 5.10 flow offload patchesFelix Fietkau2021-03-1225-473/+845
| | | | | | Includes PPPoE support and VLAN related fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add pending mtd patches adding NVMEM supportRafał Miłecki2021-03-1218-17/+515
| | | | | | | | It's meant to provide upstream support for mtd & NVMEM. It's required e.g. for reading MAC address from mtd partition content. It seems to be in a final shape so it's worth testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 18:07:56 +0000