aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools/coreutils: install lnFelix Fietkau2020-08-131-1/+1
| | | | | | It is needed for libsepol on non-GNU systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add AQL improvementsFelix Fietkau2020-08-133-0/+403
| | | | | | | Add AQL support for HE drivers. Improve assumed aggregation length based on tx rate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2020-08-131-3/+3
| | | | | | | 34aed01ca865 mt76: mt7915: use ieee80211_free_txskb to free tx skbs efc8669db5f9 mt76: mt7915: fix max_mpdu_size field for A-MSDU Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libselinux: don't depend on kernel config symbolsDaniel Golle2020-08-131-1/+1
| | | | | | | | Dependencies are meant to express actual run-time dependencies and strictly speaking, libselinux can be build and used on kernels without SELinux (not in a very meaningful way, but never mind). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: remove duplicate confguration menuDaniel Golle2020-08-131-2/+0
| | | | | Fixes: 962e73c1a4 ("procd: add selinux variant") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iproute2: disable SELinux for nowDaniel Golle2020-08-131-0/+11
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79/mikrotik: add function for loading ath9k caldataAdrian Schmutzler2020-08-131-8/+13
| | | | | | | | | | | | | The commands to read ath9k caldata on mikrotik subtarget are mostly repetitive, so let's put them into a function to make writing and reading them easier. This function will only be required when patching the MAC address. For cases where it is put correctly into the calibration data by the vendor, caldata_sysfsload_from_file can be used directly as done for ath10k at the moment. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for MikroTik RouterBOARD 760iGS (hEX S)John Thomson2020-08-138-70/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD 760iGS router. It is similar to the already supported RouterBOARD 750Gr3. The 760iGS device features an added SFP cage, and passive PoE out on port 5 compared to the RB750Gr3. https://mikrotik.com/product/hex_s Specifications: - SoC: MediaTek MT7621A - CPU: 880MHz - Flash: 16 MB - RAM: 256 MB - Ethernet: 5x 10/100/1000 Mbps - SFP cage - USB port - microSD slot Unsupported: - Beeper (requires PWM driver) - ZT2046Q (ADS7846 compatible) on SPI as slave 1 (CS1) The linux driver requires an interrupt, and pendown GPIO These are unknown, and not needed with the touchscreen only used for temperature and voltage monitoring. ads7846 hwmon: temp0 is degrees Celsius temp1 is voltage * 32 GPIOs: - 07: input passive PoE out (lan5) compatible (Mikrotik) device connected - 17: output passive PoE out (lan5) switch Installation through RouterBoot follows the usual MikroTik method https://openwrt.org/toh/mikrotik/common To boot to intramfs image in RAM: 1. Setup TFTP server to serve intramfs image. 2. Plug Ethernet cable into WAN port. 3. Unplug power, hold reset button and plug power in. Wait (~25 seconds) for beep and then release reset button. The SFP LED will be lit in RouterBoot, but will not be lit in OpenWRT. 4. Wait for a minute. Router should be running OpenWrt, check by plugging in to port 2-5 and going to 192.168.1.1. To install OpenWrt to flash: 1. Follow steps above to boot intramfs image in RAM. 2. Flash the sysupgrade.bin image with web interface or sysupgrade. 3. Once the router reboots you will be running OpenWrt from flash. OEM firmware differences: - RouterOS assigns a different MAC address for each port - The first address (E01 on the sticker) is used for wan (ether1 in OEM). - The next address is used for lan2. - The last address (E06 on the sticker) is used for sfp. [Initial port work, shared dtsi] Signed-off-by: Vince Grassia <vincenzo.grassia@zionark.com> [SFP support and GPIO identification] Signed-off-by: Luka Logar <luka.logar@iname.com> [Misc. fixes and submission] Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> [rebase, drop uart3 from state_default on 750gr3, minor commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/mt7621: create common DTSI for Mikrotik devicesAdrian Schmutzler2020-08-134-214/+93
| | | | | | | | | This moves some common definitions for Mikrotik devices, mainly routerboot partitions and reset key, to a common DTSI file. While at it, remove unused hard_config DT label. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* musl-fts: import from packages feedDaniel Golle2020-08-131-0/+60
| | | | | | | libselinux requires musl-fts to build with musl. Import it from packages feed as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* pcre: import from packages feedsDaniel Golle2020-08-132-0/+130
| | | | | | | libselinux require pcre, import to to core so it can build without packages feeds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: add selinux variantPaul Spooren2020-08-131-7/+31
| | | | | | | | This commit adds a `selinux` variant to `procd` allowing to load an SELinux policy at boot. Signed-off-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libselinux: add new packageThomas Petazzoni2020-08-131-0/+79
| | | | | | Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [rebase, update to 3.1] Signed-off-by: W. Michael Petullo <mike@flyn.org>
* libsepol: add new packageThomas Petazzoni2020-08-131-0/+66
| | | | | | Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [rebase, update to 3.1] Signed-off-by: W. Michael Petullo <mike@flyn.org>
* ramips: use gpio-export for Mikrotik RouterBOARD 750Gr3 beeperJohn Thomson2020-08-132-6/+8
| | | | | | | | | | | | | This beeper hardware requires a PWM driver for frequency selection. Since the GPIO driver does not provide that, revert the beeper support to a simple gpio-export. This effectively reverts the corresponding changes from 6ba58b7b020c ("ramips: cleanup the RB750Gr3 support") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: usb: move phy-qcom-ipq806x-usb to ipq806x modules.mkAnsuel Smith2020-08-132-18/+16
| | | | | | | | | | This driver is only used by ipq806x SoCs. Move it there and drop dependency from ipq40xx since it's not used anywere. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [rebase on changes to previous patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace nvmem qcom patch with upstream versionAnsuel Smith2020-08-133-86/+123
| | | | | | | | | | - Replace nvmem qcom patch with upstream version - Update compatible Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [refresh patches, minor commit message rewording] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace phy dwc3 patch with upstream versionAnsuel Smith2020-08-139-671/+680
| | | | | | | | | | | | - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* dropbear: fix ssh alternative when dbclient isn't builtRui Salvaterra2020-08-121-3/+3
| | | | | | | The ssh symlink was still being created even when dbclient was disabled in the build configuration. Fix this annoyance. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: routerboard-92x: ensure explicit bios size in DTSIAdrian Schmutzler2020-08-121-0/+1
| | | | | | | | | | | | | | The missing "size" property was acceptable in the context of a single DTS as the underlying device is known to have a 64KB flash, and thus the bios partition fit exactly between the preceding and following ones. However as this block has moved in a DTSI, for the sake of clarity and explicitness the size property is added to ensure that if the flash happens to be larger than expected, the bios partition remains properly sized. Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: harmonize appearance of ethX nodes in qca953x DTSesAdrian Schmutzler2020-08-1224-81/+90
| | | | | | | | | | | This harmonizes the appearance of ethX nodes in qca953x DTSes by: - having the same order of nodes and properties - removing redundant status property on eth1 (set in qca953x.dtsi) This is meant to help both copy-pasters and reviewers, since deviations and errors can be spotted easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add CGROUPS and IOSCHED_BFQ back to configAdrian Schmutzler2020-08-125-2/+6
| | | | | | | | | | | | After those symbols have been removed from generic kernel config, they were added to the target config during every kernel config refresh. As that's not desirable, add them back to the generic config. Fixes: d1a8217d87bf ("kernel: clean-up build-configurable kernel config symbols") Fixes: cfe235c43686 ("kernel: modules: add package kmod-iosched-bfq") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: fix README.md reference after renameAdrian Schmutzler2020-08-121-1/+1
| | | | | | | | | | | | The README file is displayed on "make help", but updating the command has been overlooked during the README -> README.md rename. Fix it. Fixes: d0113711a31f ("README: port to 21st century") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for MikroTik SXT 5nD r2 (SXT Lite5)Roger Pueyo Centelles2020-08-127-2/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik SXT Lite5 (product code RBSXT5nDr2, also SXT 5nD r2) is an outdoor 5GHz CPE with a 16 dBi integrated antenna built around the Atheros AR9344 SoC. It is based on the "sxt5n" board platform. Specifications: - SoC: Atheros AR9344 - RAM: 64 MB - Storage: 128 MB NAND - Wireless: Atheros AR9340 (SoC) 802.11a/n 2x2:2 - Ethernet: Atheros AR8229 switch (SoC), 1x 10/100 port, 8-32 Vdc PoE in - 6 user-controllable LEDs: · 1x power (blue) · 1x wlan (green) · 4x rssi (green) - 1 GPIO-controlled buzzer See https://mikrotik.com/product/RBSXT5nDr2 for more details. Notes: The device was already supported in the ar71xx target. There, the Ethernet port was handled by GMAC1. Here in ath79 it is handled by GMAC0, which allows to get link information (loss, speed, duplex) on the eth0 interface. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Acknowledgments: Michael Pratt (@mpratt14) for helping on the network settings. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [rebase, use mikrotik LED label prefix, make names consistent, add reg for bootloader2, use led_user for boot indication etc., minor cosmetic changes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for MikroTik RouterBOARD 921GS-5HPacD-15sSven Roederer2020-08-127-125/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD 921GS-5HPacD-15s (mANTBox 15s) is an outdoor antenna for 5 GHz with an built-in router. This ports the board from ar71xx. See https://mikrotik.com/product/RB921GS-5HPacD-15S for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9892 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in - SFP: 1x host Working: - NAND storage detection - Ethernet - Wireless - 1x user LED (blinks during boot, sysupgrade) - Reset button - Sysupgrade Untested: - SFP cage (probably not working) Installation (untested): - Boot initramfs image via TFTP and then flash sysupgrade image As the embedded RB921-pcb is a stripped down version of the RB922 this patch adds a common dtsi for this series and includes this to the final dts-files. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> [move ath10k-leds closer to ath10k definition in DTS files] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for MikroTik RouterBOARD LHG 2nDRoger Pueyo Centelles2020-08-127-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD LHG 2nD (sold as LHG 2) is a 2.4 GHz 802.11b/g/n outdoor device with a feed and an integrated dual polarization grid dish antenna based on the LHG-HB platform. See https://mikrotik.com/product/lhg_2 for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 18 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 12-28 Vdc PoE in - 8 user-controllable LEDs: · 1x power (blue) · 1x user (green) · 1x lan (green) · 1x wlan (green) · 4x rssi (green) Note: The rssihigh LED is disabled, as it shares GPIO 16 with the reset button. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [rebase, remove rssiled setup, adjust commit message, add DTSIs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: disable btif in device tree to make the WMAC work againFelix Fietkau2020-08-121-1/+1
| | | | | | | btif and wmac access the same resources and at the moment enabling one breaks the other Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fix PCI device tree node for elecom wrc-2533gentFelix Fietkau2020-08-121-2/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2020-08-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8d9a62e4def7 mt76: mt7915: fix crash on tx rate report for invalid stations 825343467df4 mt76: fix double DMA unmap of the first buffer on 7615/7915 99804560372b mt76: mt7615: register ext_phy if DBDC is detected 93407be934b2 mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops e7774de844e8 mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_ops a5602514ab03 mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_update 5c42061ce181 mt76: do not inject packets if MT76_STATE_PM is set ae4757a0ae90 mt76: mt7615: reschedule runtime-pm receiving a tx interrupt c4544d1e8a1a mt76: mt76s: fix oom in mt76s_tx_queue_skb_raw dc73103874cc mt76: mt76s: move tx processing in a dedicated wq c828c84cb134 mt76: mt7663s: move rx processing in txrx wq 2b34f2f6b0ef mt76: mt76s: move status processing in txrx wq f957b050d848 mt76: mt76s: move tx/rx processing in 2 separate works 6fe964295bd9 mt76: mt76s: get rid of unused variable 43d6127d8851 mt76: mt7915: enable U-APSD on AP side 58774b605f1c mt76: set interrupt mask register to 0 before requesting irq 06f722d8046c mt76: mt7915: clean up and fix interrupt masking in the irq handler 2fbd6baac103 mt76: mt7615: only clear unmasked interrupts in irq tasklet 5ea8b6187da2 mt76: mt76x02: clean up and fix interrupt masking in the irq handler f2e71f0c1b7e mt76: mt7615: do not do any work in napi poll after calling napi_complete_done() 1eb94624bb12 mt76: mt7915: do not do any work in napi poll after calling napi_complete_done() 5e0c587b9ac1 mt76: mt7915: clean up station stats polling and rate control update 9ab20dfbf7b1 mt76: mt7915: increase tx retry count fa69dd96f9c0 mt76: mt7915: enable offloading of sequence number assignment 9816f9812adb mt76: move mt76_check_agg_ssn to driver tx_prepare calls ad90170b0af9 mt76: mt7615: remove mtxq->agg_ssn assignment 335cd51be4c6 mt76: mt7915: simplify aggregation session check 21f7734cbb49 mt76: mt7915: add missing flags in WMM parameter settings 21182f90d947 mt76: mt7915: add Tx A-MSDU offloading support 27670514328f mt76: mt7615: use v1 MCU API on MT7615 to fix issues with adding/removing stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct-firmware: update firmware imagesMichael Yartys2020-08-121-30/+30
| | | | | | | | | | | Not a large change from last time, but should fix at least one rare wave-2 crash. The htt-mgt-community builds are trimmed for supporting lots of stations (typically 150+ stations per radio). Tested on Netgear R7800. Signed-off-by: Michael Yartys <michael.yartys@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: bump PKG_RELEASE after replacing `which`Adrian Schmutzler2020-08-123-3/+3
| | | | | | | | | Bump PKG_RELEASE for the affected packages as replacing "which" by "command -v" represents a content change. Fixes: 1fdf6b745cc3 ("treewide: replace `which` with `command -v`") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: replace `which` with `command -v`Paul Spooren2020-08-125-14/+14
| | | | | | | | | | | | | | | | | Fix shellcheck SC2230 > which is non-standard. Use builtin 'command -v' instead. Using `command -v` is POSIX compliant while `which` is not. Also to mention, `command -v` is a shell builtin whereas `which` is a separate busybox applet. Once applied to everything concerning OpenWrt we can disable the busybox feature `which` and save 3.8kB. Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Paul Spooren <mail@aparcar.org> [also replace cases in zram-swap] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* busybox: delete redundant patchMagnus Kroken2020-08-122-14/+1
| | | | | | | | | | This problem has been fixed in upstream commit 6b6a3d9339f1c08efaa18a7fb7357e20b48bdc95. This patch now (harmlessly) adds the same definition a second time. Signed-off-by: Magnus Kroken <mkroken@gmail.com> [bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm47xx: use vendor_model scheme for device/image namesAdrian Schmutzler2020-08-123-180/+180
| | | | | | | | | | | Most targets have been updated to consistently use the vendor_model scheme for device definitions and thus, image names. Apply this to bcm47xx as well. This does _not_ apply any other specific naming changes. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: use vendor_model scheme for device/image namesAdrian Schmutzler2020-08-121-57/+57
| | | | | | | | | | | Most targets have been updated to consistently use the vendor_model scheme for device definitions and thus, image names. Apply this to bcm53xx as well. This does _not_ apply any other specific naming changes. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-mediatek: resync patches with upstreamDavid Woodhouse2020-08-124-23/+49
| | | | | | | Now that my patches have been merged into upstream U-Boot, resync the cosmetic changes and the commit IDs from the final commits. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* libjson-c: fix pkgconfig fileRosen Penev2020-08-111-9/+10
| | | | | | | | | | | | | | The pkgconfig file references the host directories, not the openwrt ones. Used SED to fix as is done elsewhere. Removed CMAKE_INSTALL as a result. Removed now pointless CFLAGS. Added PKG_BUILD_PARALLEL for faster compilation. Various rearrangements for consistency between packages. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ppp: update to latest git HEADHans Dedecker2020-08-115-9/+9
| | | | | | | | | | | | 677aa53 Fix -W option for pppoe-discovery utility (#157) 115c419 Accept Malformed Windows Success Message (#156) 5bdb148 pppd: Add documentation of stop-bits option to pppd man page (#154) 2a7981f Add ipv6cp-accept-remote option 0678d3b pppd: Fix the default value for ipv6cp-accept-local to false Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: Fix cake patch for kernel 4.19.138Hauke Mehrtens2020-08-111-2/+2
| | | | | | | | | | | | | This fixes the following build problem with cake: net/sched/act_ctinfo.c: In function 'tcf_ctinfo_act': net/sched/act_ctinfo.c:99:6: error: implicit declaration of function 'tc_skb_protocol'; did you mean 'skb_protocol'? [-Werror=implicit-function-declaration] if (tc_skb_protocol(skb) == htons(ETH_P_IP)) { ^~~~~~~~~~~~~~~ skb_protocol CC [M] net/sched/sch_hfsc.o Fixes: fdac05b7416b ("kernel: Update kernel 4.19 to version 4.19.138") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Create UBIFS v5 volumeHauke Mehrtens2020-08-116-195/+0
| | | | | | | | | | | | | In commit 87b35c16adcf ("kernel: ubifs: create use file system format 4 by default") we changed the default UBIFS version used when the kernel creates a new volume from 5 to 4. UBIFS v5 was added in kernel 4.10 and only kernel 4.10 and later can read it. We changed the kernel to create version 4 volumes also on more recent kernel versions to make it possible to downgrade to an OpenWrt version with kernel 4.9, the upgrade still works. This is probably not needed any more and we can remove this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm63xx: switch to upstream CFE detection patchÁlvaro Fernández Rojas2020-08-113-71/+78
| | | | | | This patch has been merged in linux 5.9. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* malta: disable unnecessary built-in CDROM supportTony Ambardar2020-08-112-6/+0
| | | | | | | | | | | | | The CDROM is not needed for booting and can be included by selecting the loadable module as a package instead. This also avoids triggering a memory allocation failure during probing of the CDROM due to lack of low 16MB DMA memory, as decribed in FS#3278: https://bugs.openwrt.org/index.php?do=details&task_id=3278 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Link: https://github.com/openwrt/openwrt/pull/3289 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* oxnas: reduce size of ATA DMA descriptor spaceDaniel Golle2020-08-112-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After years of trying to find the reason for random kernel crashes while both CPU and SATA are under load it has been found. Some odd commented-out #defines in kref's single-port driver [1] which were copied from the vendor driver made me develop a theory: The IO-mapped memory area for DMA descriptors apparetly got some holes just before the alignment boundaries. This feels like an off-by-one bug in the hardware or maybe those fields are used internally by the SATA controller's firmware. Whatever the cause is: they cannot be used and trying to use them results in reading back unexpected stuff and ends up with oopsing Unable to handle kernel paging request at virtual address d085c004 Work around the issue by reducing the area used for bmdma descriptors. This reduces SATA performance (iops) quite a bit, but finally makes things work reliably. Possibly one could optimize this much more by really just skipping the holes in that memory area -- however, that seems to be non-trivial with the driver and libata in it's current form (suggestions are welcome). The 'proper' way to have good SATA performance would be to make use of the hardware RAID features (one can use the JBOD mode to access even just a single disc transparently through the RAID controller integrated in the SATA host instead of accessing the SATA ports 'raw' as we do now). [1]: https://github.com/kref/linux-oxnas/blob/master/drivers/ata/sata_oxnas.c#L25 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ar71xx: fix ZyXEL NBG6616 wifi switchChristoph Krapp2020-08-111-2/+2
| | | | | | | The device uses a rf-kill switch instead of a button. Furthermore the GPIO is active high. Signed-off-by: Christoph Krapp <achterin@googlemail.com>
* toolchain/binutils: fix broken build of binutils 2.34 on mips64Tony Ambardar2020-08-101-1/+1
| | | | | | | | | | | | | Commit 53470bdf32 ("toolchain/binutils: Add binutils 2.34") logs refreshed patches, but also adds a typo causing failed builds on mipsel64 platforms, including the malta subtarget. Update the patch to fix this. This fixes the following build error: make[7]: *** No rule to make target 'elf64ltsmip.o', needed by 'ld-new'. Stop. Fixes: FS#3276 Fixes: 53470bdf32 ("toolchain/binutils: Add binutils 2.34") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Move CONFIG_IONIC to generic kernel configHauke Mehrtens2020-08-1013-12/+1
| | | | | | | It is deactivated everywhere, just set this in the generic config. Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* malta: Refresh kernel configurationHauke Mehrtens2020-08-105-18/+23
| | | | | | | | | | | This refreshes the kernel configuration on top of kernel 5.4. It now builds without asking to select some kernel options on all 4 subtargets. It still does not boot up, there is a different problem. Tested-By: Yousong Zhou <yszhou4tech@gmail.com> Acked-By: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bintuils: Pack libctf-nobfd.so in additionHauke Mehrtens2020-08-101-2/+3
| | | | | | | | | | readelf is linked against this library on MIPS64BE This fixes a build problem on MIPS64BE. In addition also explicitly activate it in the configure command. Fixes: 60f595daab45 ("binutils: update to version 2.34") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.14 to version 4.14.193Hauke Mehrtens2020-08-109-17/+17
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Update kernel 4.19 to version 4.19.138Hauke Mehrtens2020-08-1018-260/+36
| | | | | | Compile and run tested on lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 15:42:03 +0000