aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: make the relocation address configurableSungbo Eo2022-01-291-1/+1
| | | | | | | | | If no argument is given to relocate-kernel, KERNEL_LOADADDR will be used just as before. This is a preparation for ramips support of ipTIME AX2004M. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: add support for ipTIME NAS1dualSungbo Eo2022-01-294-0/+337
| | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: remove duplicate CONFIG_POWER_RESET entriesSungbo Eo2022-01-293-6/+1
| | | | | | | The option is already enabled in the target config since 9149ed4f05f8 ("mvebu: cortexa9: Add support for Ctera C200-V2"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-295-4/+3
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for ipTIME NAS1Sungbo Eo2022-01-297-0/+270
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: rework 02_networkSungbo Eo2022-01-291-42/+67
| | | | | | | Just like other targets do, introduce two setup functions for interfaces and MAC addresses. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: drop kernel 5.4 supportSungbo Eo2022-01-2920-1937/+0
| | | | | | | It has been 3 months since we switched this target to 5.10, now we can remove the 5.4 files. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: move bootargs-append patch to genericSungbo Eo2022-01-294-7/+7
| | | | | | | | | | This moves bootargs-append support patch from ipq40xx and ipq806x to generic. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This is a preparation for kirkwood support of ipTIME NAS1. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* firmware-utils: bump to git HEADSungbo Eo2022-01-291-3/+3
| | | | | | | 0c15cad iptime-naspkg: add image header tool for ipTIME NAS series 872c87c iptime-crc32: add image header tool for new ipTIME models Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* util-linux: add lslocksRoman Azarenko2022-01-281-0/+16
| | | | | | This change adds the "lslocks" utility from util-linux. Signed-off-by: Roman Azarenko <roman.azarenko@iopsys.eu>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-2818-77/+35
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.173John Audia2022-01-281-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* netfilter.mk: add conntrack support to nft bridgeEtienne Champetier2022-01-281-0/+1
| | | | | | | | | This allows to implement statefull bridge filtering As the uncompressed size is only 7.6k (arm64), just add nf_conntrack_bridge.ko to kmod-nft-bridge package Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* octeontx: Refresh kernel configurationHauke Mehrtens2022-01-281-7/+1
| | | | | | | Refresh the kernel configuration. No manual changes done. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add CONFIG_CRYPTO_DEV_OCTEONTX_CPT kernel config optionHauke Mehrtens2022-01-281-0/+1
| | | | | | | This new kernel configuration option is available when building the octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix compile warningHauke Mehrtens2022-01-282-4/+8
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arc770: Remove arc770 targetHauke Mehrtens2022-01-2811-412/+1
| | | | | | | | | | | | | | | | | The arc700 target is not booting up since some time, see here: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/400 It looks like there is a problem in the toolchain when using glibc. Currently no one is working on fixing this problem, remove the target instead. This target also does not have many users we are aware of. If someone wants to have this target back, feel free to add a fixed version of this target again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-01-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | 16a1070 fw4.uc: handle zone masq6 option 5f61dbf ruleset: fix chain selection for mark and dscp targets 0bc844b ruleset: properly deal with wildcards in zone device selectors 101988d fw4: fix family comparisons 127dbc0 ruleset: emit AF specific rules for DSCP matches d63cb89 fw4: fix parsing inverted numeric DSCP values 8c8a867 fw4: fix wrong `parse_network()` return value on `parse_subnet()` failure f85bb2d ruleset: consolidate zone matches for raw_prerouting and raw_output chains 5669bc7 fw4: consolidate device grouping logic 94f03e0 ruleset: properly render redirect targets without port fff9779 fw4: fix family selection logic for redirect rules ca88fcd tests: update interface dump mock data e60bb4b ruleset: support non-contiguous address masks 8fec51a fw4: fix potential crashes when parsing invalid redirect sections c08eb44 fw4: fix redirect destination zone resolving 0df6ba0 fw4: fix address selection logic for DNAT reflection rules 60a2518 tests: add test coverage for redirect rules e479eff fw4: add RFC-8622 'Least Effort' (LE) DSCP mark ac8a737 ruleset: remove redundant syn check bd5dc4b tests: run testcases in strict mode 3ee6a5c ruleset: fix undeclared variable access uncovered by strict mode Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-01-282-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c6dae42 LICENSE: add ISC license file 402f603 lib: introduce struct library dcb6ffd struct: fix PowerPC specific compiler pragma name a0512ea treewide: fix typo in exported function names and types eaaaf88 nl80211: fix wiphy dump reply merge logic e6efadb fs: add utility functions 54ef6c0 nl80211: fix premature netlink reply receive abort 07802f3 syntax: disallow keywords in object property shorthand notation 3489b75 vm: support object property access on resource value types dc8027c types: consider resource prototypes when marking reachable objects 5680fab treewide: fix upvalue reference type name 0d29b25 treewide: fix "resource" misspellings 99fdafd vm: introduce value registry 66f7c00 ubus: add support for async requests 5c77dd5 fs: implement fdopen(), file.fileno() and proc.fileno() b605dbf treewide: rework numeric value handling 599d233 vallist: store double values in a platform neutral manner 5bb9ab7 struct: reuse double packing routines from core 2fd7ab5 vm: optimize string concatenation eafa321 lib: implement uniq() function 6b2e79a types: add initial infrastructure for function serialization 725bb75 compiler, vm: use a program wide constant list 6c2caf9 source: refactor source file handling 371ba45 program: implement support for precompiling source files 3578afe build: support building without compile capabilities 61d0a34 lib: replace usages of vasprintf() with xvasprintf() 03b6a8e syntax: drop legacy syntax support 01132db lib: fix %J string formats with precision specifier 3f44c42 lib: rework format string handling a1b3c5d struct: implement `*` format, fix invalid memory accesses 34a04a2 run_tests.sh: fix exitcode evaluation abe38e7 run_tests.sh: add ability to define environment variables for testcases 04fa2ba tests: reorganize testcase files 6a55d10 lib: fix exists() error return value aa860a3 vm: fix `null` loose equality/inequality checks 3f6d199 vallist: uc_number_parse(): parse empty strings as `0`, not `NaN` ddc5aa7 vm: fix NaN strict equality tests Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: enable I2C_CHARDEV in mt7621/config-5.10Stijn Tintel2022-01-281-0/+1
| | | | | | | | I2C_CHARDEV used to be enabled in mt7621/config-5.4. Enable it in the 5.10 config, as it's required for PoE control on Unifi Switch Flex. Fixes: b4aad29a1d7a ("ramips: add support for kernel 5.10") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-282-181/+1
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* firmware-utils: update to git HEAD of 2022-01-28Daniel Golle2022-01-281-3/+3
| | | | | | | 6c95945 ptgen: add Chromium OS kernel partition support 8e7274e cros-vbutil: add Chrome OS vboot kernel-signing utility Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* perf: Depend on libbfd and libopcodes when enabledFlorian Fainelli2022-01-271-1/+2
| | | | | | | | bpftool will enabled libbfd and libopcodes which gets picked up by perf as libraries to link against. Add those missing dependencies when either of these packages are enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* tools: build bash on macOS and use it for ipkg-buildFelix Fietkau2022-01-273-1/+25
| | | | | | | | | On macOS, system binaries silently drop the environment variables for injecting extra shared libraries (used by fakeroot). This is done for security reasons. Work around this by building bash from source, so that it gets an ad-hoc signature and does not have these restrictions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/coreutils: build chownFelix Fietkau2022-01-271-1/+1
| | | | | | | On ARM macOS, injecting extra shared libraries does not work for system binaries. This causes fakeroot to fail for chown calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix unresolved symbols on arm64 macOSFelix Fietkau2022-01-271-10/+43
| | | | | | | The $INODE64 symbol variants are not present, since the base system always uses 64-bit file offsets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: ship llvm toolchainFelix Fietkau2022-01-271-2/+1
| | | | | | This allows ebpf packages like qosify to be built with it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netfilter: correct some dependenciesTiago Gaspar2022-01-271-2/+2
| | | | | | | | | | | | nf-nathelper-extra and nf-conntrack-netlink had iptables related dependencies, yet, when looking for the respective kernel symbols and checking it's dependencies it was confirmed that iptables wasn't required and that these were either it's own moodule or tool independent (nftables or iptables). Correct these and make sure no unneeded extras are pulled in. Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
* rockchip: disable UHS modes for NanoPi R4SDavid Bauer2022-01-271-0/+26
| | | | | | | | | | | The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting while U-Boot requires the card to be in 3.3V mode. Remove UHS support from the SD controller so the card remains in 3.3V mode. This reduces transfer speeds but ensures a reboot whether from userspace or following a kernel panic is always working. Signed-off-by: David Bauer <mail@david-bauer.net>
* meta: create FUNDING.ymlPaul Spooren2022-01-261-0/+1
| | | | | | | By adding this file a badge should appear in the GitHub web interface to motivate people donate money to the OpenWrt project. Signed-off-by: Paul Spooren <mail@aparcar.org>
* mediatek: mt7623: include regular AHCI PCI driverDaniel Golle2022-01-251-1/+1
| | | | | | | | | The legacy image for the UniElec U7623-02 until now included kmod-ata-ahci-mtk. The MT7623 chip doesn't have that IP and that board uses a PCIe-connected AHCI controller for the SATA port and mSATA-pins of the mPCIe socket. Hence include kmod-ata-ahci instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* scripts/feeds: install targets to target/linux/feeds and support overridingFelix Fietkau2022-01-241-8/+26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* scripts/feeds: fix installing targets without explicitly specifying the feedFelix Fietkau2022-01-241-0/+2
| | | | | | Add similar code to what is done on packages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: increase scan depth for finding targetsFelix Fietkau2022-01-241-1/+1
| | | | | | This allows targets to be put into target/linux/feeds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: change PYTHON to python3Felix Fietkau2022-01-241-1/+1
| | | | | | | | On recent macOS, /usr/bin/python3 is a wrapper that finds the right python executable It checks argv[0] to determine if python2 or python3 should be called. Always execute it as python3 to ensure it calls the right version Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: drop 5.4 kernelRobert Marko2022-01-2448-7415/+0
| | | | | | | Since 5.10 is now default, no point in keeping 5.4 around. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* uboot-mediatek: update to version 2022.01Daniel Golle2022-01-2321-111/+62
| | | | | | | Tested on BananaPi R2 (SD, eMMC), BananaPi R64 (SD, eMMC, SPI-NAND) and UniElec U7623-02 (eMMC). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: store random MAC address in U-Boot env on first bootDaniel Golle2022-01-231-0/+14
| | | | | | | For devboards without a MAC address assigned from factory, store the random MAC in U-Boot env on first boot to make it persistent. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add configuration for UniElec U7623 boardDaniel Golle2022-01-232-5/+9
| | | | | | | Add U-Boot env settings to allow accessing the environment using fw_printenv and fw_setenv tools on the UniElec U7623 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: rework images for U7623-02 boardDaniel Golle2022-01-2313-313/+95
| | | | | | | | | | | | | | | | | | | | | | Users of older OpenWrt versions need sysupgrade using the *emmc.img.gz file once which will upgrade U-Boot and switch to the new image layout. Users of the vendor firmware need to first flash the legacy image to then sunsequently carry out a full-flash upgrade. Alternatively the board can also be flashed using MediaTek's proprietary SP Flash Tool. Configuration as well as persistent MAC address will be lost once at this point and you will have to redo (or restore) all configuration manually. To restore the previous persistent MAC address users may set it manually using fw_setenv ethaddr 00:11:22:33:44:55 For future upgrades once running OpenWrt past this commit, the usual *sysupgrade.itb file can be used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update build for the U7623-02 boardDaniel Golle2022-01-236-70/+273
| | | | | | | Brings bootmenu and production/recovery dual-boot scheme like on the BPi-R2, BPi-R64, E8450 and UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add common DTS aliases for UniElec U7623 boardDaniel Golle2022-01-231-2/+8
| | | | | | | | * Use serial0 instead of serial2 for the only serial port * Add LED aliases * Add ethernet0 alias to inherit ethaddr from U-Boot env Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uml: make use of 'rootfs-part' featureDaniel Golle2022-01-232-2/+2
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_uml in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: make use of 'rootfs-part' featureDaniel Golle2022-01-232-2/+2
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_sunxi in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* omap: make use of 'rootfs-part' featureDaniel Golle2022-01-232-2/+2
| | | | | | | Use 'rootfs-part' feature instead of referencing the TARGET_omap in Config-images.in. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZEDaniel Golle2022-01-233-5/+5
| | | | | | | Enable 'rootfs-part' feature to make the size of the partition of the production image configurable instead of hard-coding it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: update to git HEADHans Dedecker2022-01-231-3/+3
| | | | | | ed71876 iprule: add support for uidrange Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ucode: add temporary fix for integer formatting on 32bit systemsJo-Philipp Wich2022-01-232-1/+12
| | | | | | | | | | | | The ucode VM always passes 64bit integer values to sprintf implementation while the `%d` format expects 32bit integers on 32bit platforms, leading to incorrect formatting results. Temporarily solve the issue by casting the numeric argument to int until a more thorough fix arrives with the next update. Fixes: FS#4234 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: add support for GL.iNet GL-XE300Victorien Molle2022-01-222-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL.iNet GL-XE300 is a 4G LTE Wireless router, based on QCA9531 SoC. Specifications: - SoC: QCA9531 (650MHz) - RAM: DDR2 128M - Flash: SPI NOR 16M + SPI NAND 128M - WiFi: 2.4GHz with 2 antennas - Ethernet: - 1x LAN (10/100M) - 1x WAN (10/100M) - LTE: - USB: 1x USB 2.0 port - UART: - 3.3V, TX, RX, GND / 115200 8N1 MAC addresses as verified by OEM firmware: use address source LAN *:c5 art 0x0 (label) WAN *:c6 label + 1 WLAN *:c7 art 0x1002 Installation via U-Boot rescue: 1. Press and hold reset and power buttons simultaneously 2. Wait for the LAN led to blink 5 times 3. Release reset and power buttons 4. The rescue page is accessible via http://192.168.1.1 5. Select the OpenWrt factory image and start upgrade 6. Wait for the router to flash new firmware and reboot Revert to stock firmware: i. Download the stock firmware from GL.Inet website ii. Use the same method explained above to flash the stock firmware Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr> [update commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: correct vendor name for COMFAST/JoowinRodrigo Araujo2022-01-227-44/+50
| | | | | | | | | | | | | | | | When Joowin WR758AC V1 and V2 devices were added, they should have been added with the primary manufacturer name which is COMFAST, since Joowin is just an alternate vendor name on some coutries or stores. Fix this by changing the the vendor name on the respective files and set Joowin as ALT0 variants while ensuring compatibility for early users. Also adjust the model names to better follow the naming rules. As a side effect, fix mt76x8 network script which was left incorrectly unsorted on the case block conditions. Fixes: 766733e172 ("ramips: add support for Joowin WR758AC V1 and V2") Signed-off-by: Rodrigo Araujo <araujo.rm@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 05:20:37 +0000