aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: backport the upstream implementation of threaded NAPI to 5.4Felix Fietkau2021-12-1512-375/+692
| | | | | | | The workqueue based implementation has a few corner cases and typically lower performance than the upstream one Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: remove Linux 5.4 supportRui Salvaterra2021-12-1575-10093/+0
| | | | | | We're at 5.10 stable, this can finally go. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ramips: fix Tenbay T-MB5EU v1 Wireless MACDavid Bauer2021-12-151-0/+5
| | | | | | | | | | | | | It was reported, that Tenbay T-MB5EU v1 do have incorrect Wireless MAC address set on 2.4 and 5 GHz. Some boards do not seem to have the correct MAC address set for the external PHY of the MT7915 radio at caldata offset 0xa. As the external PHY does not expose a DT binding (yet), fix up the mac address in userspace. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add OpenWrt specific statistic countersDavid Bauer2021-12-152-1/+105
| | | | | | | | | | This adds a new struct for storing statistics not (yet) tracked by hostapd regarding RRM and WNM activity. These statistics can be read using the get_status hostapd interface ubus method. Signed-off-by: David Bauer <mail@david-bauer.net>
* iw: Update to version 5.16Hauke Mehrtens2021-12-144-367/+260
| | | | | | | | | | | Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package Makefile. This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD. This is needed to make it compatible with our patched mac80211 from kernel 5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libnl-tiny: update to the latest versionHauke Mehrtens2021-12-141-4/+4
| | | | | | 8e0555f attr.h: Add NLA_PUT_S32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15.8Hauke Mehrtens2021-12-1419-390/+29
| | | | | | | | | | | | | The following patches were backported from upstream before and are not needed any more: package/kernel/mac80211/patches/ath10k/081-ath10k-fix-module-load-regression-with-iram-recovery-feature.patch package/kernel/mac80211/patches/ath10k/980-ath10k-fix-max-antenna-gain-unit.patch package/kernel/mac80211/patches/build/010-headers-Add-devm_platform_get_and_ioremap_resource.patch package/kernel/mac80211/patches/subsys/300-mac80211-drop-check-for-DONT_REORDER-in-__ieee80211_.patch package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch package/kernel/mac80211/patches/subsys/308-mac80211-fix-radiotap-header-generation.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm4908: add fdt-utils to default packagesRafał Miłecki2021-12-141-1/+1
| | | | | | | It's required by sysupgrade. Fixes: 5f05795aa771 ("bcm4908: sysupgrade: add pkgtb format support") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* layerscape: armv7: refresh config-5.10Martin Schiller2021-12-131-24/+30
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: armv7: copy config-5.4 to config-5.10Martin Schiller2021-12-131-0/+673
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: armv8_64b: refresh config-5.10Martin Schiller2021-12-131-99/+71
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: armv8_64b: copy config-5.4 to config-5.10Martin Schiller2021-12-131-0/+881
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: armv8_64b: use non-SDK dts files for linux-5.10 or newerMartin Schiller2021-12-131-0/+24
| | | | | | | Since we decided to drop the LSDK patches with linux-5.10, we now have to switch to the corresponding upstream dts files as well. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: armv8_64b: fix KERNEL_LOADADDR for linux >= 5.8Martin Schiller2021-12-131-0/+4
| | | | | | | | | | In kernel versions newer than 5.8 the arm64 TEXT_OFFSET (0x80000) has been set to 0x0 (and later removed). This will break Uimages with kernel load addresses that aren't 2MiB aligned any longer. Resulting in the kernel silently fail to boot. For layerscape armv8_64b targets this needs to be changed to 0x80000000 (start of RAM). Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: add patches for kernel 5.10Martin Schiller2021-12-135-0/+12680
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: add kernel 5.10 as testing versionMartin Schiller2021-12-131-0/+1
| | | | | | | This patch adds "KERNEL_TESTING_PATCHVER:=5.10" to the Makefile in layerscape target to allow using Kernel 5.10 for testing. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* layerscape: remove unneeded KERNEL_ENTRY_POINT definitionMartin Schiller2021-12-132-2/+0
| | | | | | As KERNEL_ENTRY_POINT is identical to KERNEL_LOADADDR, drop it. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-ddr-phy: bump to LSDK-21.08Martin Schiller2021-12-131-3/+3
| | | | | | Update ls-ddr-phy to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* restool: bump to LSDK-21.08Martin Schiller2021-12-131-3/+3
| | | | | | Update restool to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-dpl: bump to LSDK-21.08Martin Schiller2021-12-131-9/+9
| | | | | | Update ls-dpl to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-mc: bump to LSDK-21.08Martin Schiller2021-12-131-6/+6
| | | | | | Update ls-mc to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ppfe-firmware: bump to LSDK-21.08Martin Schiller2021-12-131-4/+4
| | | | | | | | Update ppfe-firmware to latest LSDK-21.08. Switched to AUTORELEASE for simplicity. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* fman-ucode: bump to LSDK-21.08Martin Schiller2021-12-131-4/+4
| | | | | | | | | Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode of LSDK-21.08 had no changes. Switched to AUTORELEASE for simplicity. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* tfa-layerscape: bump to LSDK-21.08Martin Schiller2021-12-134-56/+60
| | | | | | Update tfa package to latest LSDK-21.08. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-layerscape: bump to LSDK-21.08Martin Schiller2021-12-1321-49/+87
| | | | | | | | | | | | | Update layerscape u-boot package to LSDK-21.08 and drop patches which are no longer needed. The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect the configured bootcmd and mc_init values. See [1] for more informations. [1] https://source.denx.de/u-boot/u-boot/-/commit/b62c174e861bddc3c7131045ed018556645cecb9 Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ls-rcw: bump to LSDK-21.08Martin Schiller2021-12-132-38/+3
| | | | | | | Update ls-rcw to latest LSDK-21.08. Drop patch 0001 since it had been integrated. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ramips: switch to kernel 5.10Rui Salvaterra2021-12-131-2/+1
| | | | | | | | Tested on mt7621 (Redmi AC2100) and running stable for several months. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ramips: mt7620: use OKLI loader with Jboot devicesPawel Dembicki2021-12-1310-13/+53
| | | | | | | | | | | Jboot devices have problem with >2MB kernelsize. The only way to avoid this problem is use small loader. This patch switch all mt7620 Jboot devices to lzma OKLI loader. Suggested-by: Szabolcs Hubai <szab.hu@gmail.com> Co-authored-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* bcm53xx: sysupgrade: fix support for Luxul's legacy firmware formatRafał Miłecki2021-12-131-1/+3
| | | | | Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* otrx: update to the latest masterRafał Miłecki2021-12-131-3/+3
| | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: sysupgrade: add pkgtb format supportRafał Miłecki2021-12-131-2/+183
| | | | | | | | | | | | | | BCM4908 devices with U-Boot use pkgtb firmware format. It's based on U-Boot's FIT: DTB with configurations, images & embedded data. This format contains bootfs, rootfs and optionally a first stage U-Boot loader. Contained images need to be extracted & flashed. Broadcom used two sets of firmwares: main & backup. It uses UBI volumes "metadata1" & "metadata2" for storing U-Boot env variables with info about flashed images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dtc: support printing binary data with fdtgetRafał Miłecki2021-12-131-0/+137
| | | | | | | It's needed for extracting binary images. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* dtc: import package for dtc & fdt from packages feedRafał Miłecki2021-12-131-0/+93
| | | | | | | | | | | | | | | fdt* utils are needed by targets that use U-Boot FIT images for sysupgrade. It includes all recent BCM4908 SoC routers as Broadcom switched from CFE to U-Boot. fdtget is required for extracting images (bootfs & rootfs) from Broadcom's ITB. Extracted images can be then flashed to UBI volumes. sysupgrade is core functionality so it needs dtc as part of base code base. Cc: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: use uniform vendor value for british telecomMoritz Warning2021-12-124-6/+6
| | | | | | British Telecom is mostly known as BT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* kernel: bump 5.10 to 5.10.83John Audia2021-12-1233-116/+61
| | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1] bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6 Build system: x86_64* Build-tested: bcm2711/RPi4B, ipq806x/R7800† Run-tested: bcm2711/RPi4B, ipq806x/R7800† * Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build (latest bump of ca-certificates) † Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* ipq40xx: fix reset button GPIO for GL.iNet GL-B2200Enrico Mioso2021-12-121-1/+1
| | | | | | | | | GL.iNet's U-Boot checks for GPIO 40, not 43. Changing this allows the RESET button to work as expected. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com>
* ramips: add support for HUMAX E10Kyoungkyu Park2021-12-123-0/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router, based on MediaTek MT7621A. Specifications: - SoC: MT7621A - RAM: DDR3 128MB - Flash: SPI NOR 16MB (MXIC MX25L12805D) - WiFi: - 2.4GHz: MT7615 - 5GHz: MT7615 - Ethernet: 2x 10/100/1000Mbps - Switch: SoC internal - USB: 1x USB 2.0 Type-A - UART: J1 (57600 8N1) - pinout: [3V3] (RXD) (GND) (TXD) Installation via web interface: - Flash **factory** image through the stock web interface. Recovery procedure: 1. Connect ethernet cable between Router **LAN** port and PC Ethernet port. 2. Set your computer to a static IP **192.168.1.1** 3. Turn the device off and wait a few seconds. Hold the WPS button on front of device and insert power. 4. Send a firmware image to **192.168.1.6** using TFTP. You can use any TFTP client. (tftp, curl, Tftpd64...) - It can accept both images which is HUMAX stock firmware dump (0x70000-0x1000000) image and OpenWRT **sysupgrade** image. Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space> [remove trailing whitespace] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt76x8: tidy up 02_networkSungbo Eo2021-12-121-8/+5
| | | | | | | * fix alphabetic sorting * consolidate duplicate cases Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: improve zip build recipeSungbo Eo2021-12-121-3/+5
| | | | | | | | | * clean before build * specify executable path * allow adding extra options for zip * use basename of $@ Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: fix RCU issue in xt_FLOWOFFLOAD patchFelix Fietkau2021-12-111-3/+1
| | | | | | cond_resched() may not be called in a rcu-locked section Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to git HEADDaniel Golle2021-12-111-3/+3
| | | | | | bb95fe8 jail: make sure jailed process is terminated Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: fix various dts warningsChristian Lamparter2021-12-1113-5/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ar9344_openmesh_mr600-v1.dts:40.10-44.5: Warning (gpios_property): /leds-ath9k/wifi2g: Missing property '#gpio-cells' in node /ahb/pcie-controller@180c0000/wifi@0,0 or bad phandle => added gpio-controller + #gpio-cells qca955x_zyxel_nbg6x16.dtsi:121.3-13: Warning (reg_format): /ahb/usb@1b000000/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) ../dts/qca955x_zyxel_nbg6x16.dtsi:131.3-13: Warning (reg_format): /ahb/usb@1b400000/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) qca955x_zyxel_nbg6x16.dtsi:120.20-123.4: Warning (avoid_default_addr_size): /ahb/usb@1b000000/port@1: Relying on default #address-cells value => ath79's usb-nodes are missing the address- and size-cells properties. These are needed for usb led trigger support. ar7242_ubnt_sw.dtsi:54.4-14: Warning (reg_format): /gpio_spi/gpio_spi@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) => the #address-cells and #size-cells had to be nudged. qca9531_dlink_dch-g020-a1.dts:19.6-39.4: Warning (i2c_bus_bridge): /i2c: incorrect #size-cells for I2C bus => #size-cells = <0>; Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* rtl8812au-ct: update driver to be ready for 5.15Janpieter Sollie2021-12-111-3/+3
| | | | | | | | update rtl8812au-ct driver to be ready for 5.15 Linux. Signed-off-by: Janpieter Sollie <janpieter.sollie@edpnet.be> [added commit message from PR with changes, added tag to subject] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: fixed wifi support for AVM FRITZ!Box 7430Joel Linn2021-12-111-2/+4
| | | | | | | | | | | | adds the correct offset for the calibration data. The values are according to the OpenWrt Forum Thread: "Fritzbox 7430 and wifi". Link: <https://forum.openwrt.org/t/fritzbox-7430-and-wifi/86944> Reported-by: RENErica Signed-off-by: Joel Linn <jl@conductive.de> [changed commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: add support for WD My Net N600Ryan Mounce2021-12-116-87/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9344 RAM: 128MB Flash: 16MiB SPI NOR 5GHz WiFi: AR9382 PCIe 2x2:2 802.11n 2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n 5x Fast ethernet via SoC switch (green LEDs) 1x USB 2.0 4x front LEDs from SoC GPIO 1x front WPS button from SoC GPIO 1x bottom reset button from SoC GPIO UART header JP1, 115200 no parity 1 stop TX GND VCC (N/P) RX Flash factory image via "emergency room" recovery: - Configure your computer with a static IP 192.168.1.123/24 - Connect to LAN port on the N600 switch - Hold reset putton - Power on, holding reset until the power LED blinks slowly - Visit http://192.168.1.1/ and upload OpenWrt factory image - Wait at least 5 minutes for flashing, reboot and key generation - Visit http://192.168.1.1/ (OpenWrt LuCI) and upload OpenWrt sysupgrade image Signed-off-by: Ryan Mounce <ryan@mounce.com.au> [dt leds preparations] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: add support for jjPlus JWAP230Olivier Valentin2021-12-113-0/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jjPlus JWAP230 is an access point board built around the QCA9558, with built-in 2.4GHz 3x3 N WiFi (28dBm). It can be expanded with 2 mini-PCIe boards, and has an USB2 root port. Specifications: - SOC: Qualcomm Atheros QCA9558 - CPU: 720MHz - H/W switch: QCA8327 rev 2 - Flash: 16 MiB SPI NOR (en25qh128) - RAM: 128 MiB DDR2 - WLAN: AR9550 built-in SoC bgn 3T3R (ath9k) - PCI: 2x mini-PCIe (optional 5V) - LEDs: 6x LEDs (3 are currently available) - Button: 1x Reset (not yet defined) - USB2: - 1x Type A root port - 1x combined mini-PCIe - Ethernet: - 2x 10/100/1000 (1x PoE 802.3af (36-57 V)) Notes: The device used to be supported in the ar71xx target. For upgrades: Please use "sysupgrade --force -n <image>". This will restore the device back to OpenWrt defaults! MAC address assignment: use source LAN art 0x0 WAN art 0x6 WLAN art 0x1002 (as part of the calibration data) Flash instructions: - install from u-boot with tftp (requires serial access) > setenv ipaddr a.b.c.d > setenv serverip e.f.g.h > tftp 0x80060000 \ openwrt-ath79-generic-jjplus_jwap230-squashfs-sysupgrade.bin > erase 0x9f050000 +${filesize} > cp.b $fileaddr 0x9f050000 $filesize > setenv bootcmd bootm 0x9f050000 > saveenv Signed-off-by: Olivier Valentin <valentio@free.fr> [Added DT-Leds (based on ar71xx), Added more notes about sysupgrade, fixed "qca9550" to match SoC in commit and dts file name] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: remove old lzma tuning patchChristian Lamparter2021-12-111-22/+0
| | | | | | | | | | | | | | | | | | | | | Chen Minqiang reported in his GitHub PR #4733 that: With CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y option set, the popular x86/amd64 target's initramfs-kernel failed to boot. The cause for this boot failure is that the LZMA compression uses a the first bytes to encode the compression parameters. It does not have a fixed magic. Yes, this only works if the the existing lzma options in the upstream are not changed. This patch does away with OpenWrt special LZMA options tuning since it is rather unlikely that upstream will improve the compression algorithm detection after all this time. Even though, the tuning produced a smaller initramfs (~1.1% in a spot check). Link: <https://github.com/openwrt/openwrt/pull/4733> Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: add/improve support for Sophos SG/XG productsStan Grishin2021-12-112-4/+13
| | | | | | | | | * Better product ID for Sophos SG/XG-105 models * Add support for Sophos SG/XG-135 r1, r2 with/without wireless Signed-off-by: Stan Grishin <stangri@melmac.ca> [Changed subject to x86 - probably eaten somewhere, the PR had it] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add more disabled config optionsJosef Schlehofer2021-12-111-0/+2
| | | | | | | | | | | | | | | | | | NET_DSA_MSCC_FELIX: Marvell 88E6xxx Ethernet switch fabric support (NET_DSA_MV88E6XXX) [N/m/y/?] n Ocelot / Felix Ethernet switch support (NET_DSA_MSCC_FELIX) [N/m/y/?] (NEW) Error in reading or end of file. make[6]: *** [scripts/kconfig/Makefile:71: syncconfig] Error 1 make[5]: *** [Makefile:603: syncconfig] Error 2 IR_IMON_RAW: SoundGraph iMON Receiver (early raw IR models) (IR_IMON_RAW) [N/m/?] (NEW) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [squashed with "kernel: add missing IR_IMON_RAW config symbol"] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* hostapd: add support for specifying the FILS DHCP serverFelix Fietkau2021-12-103-1/+18
| | | | | | | | The 'fils_dhcp' option can be set to '*' in order to autodetect the DHCP server For proto=dhcp networks, the discovered dhcp server will be used For all other networks, udhcpc is called to discover the address Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:25:16 +0000