aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mt76: select 802.11w supportStijn Tintel2017-01-151-1/+3
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name>
* ramips: Added Onion Omega2 and Omega2+Lazar Demin2017-01-158-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io) Specifications: - SoC: MediaTek MT7688AN (580MHz, ramips) - Omega2 - RAM: 64MB DDR - Storage: 16MB NOR SPI flash onboard - Omega2+ - RAM: 128MB DDR - Storage: 32MB NOR SPI flash onboard + microSD slot - Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter - Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port - Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock) - All Docks Provide: - Micro-USB port to provide power to the Omega - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial - USB 2.0 socket connected to Omega - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide: - Omega GPIO breakout - Allows for connection of Omega Expansions: - Ethernet Expansion - Relay Expansion - PWM Expansion - OLED Expansion - Ethernet Expansion - Proto Expansion - Cellular Expansion Signed-off-by: Lazar Demin <lazar@onion.io>
* kernel: can: Add missing regmap dependency for kernel 4.4Florian Fainelli2017-01-151-1/+1
| | | | | | | Fixes build failure for kmod-can-c-can-platform which depends on kmod-regmap for kernel 4.1 and 4.4. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ar71xx: Detect USB port on Mikrotik RB750UPJoão Chaínho2017-01-151-0/+3
| | | | | | The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* ramips: Add I2C driver to the default kernel configRosen Penev2017-01-153-23/+7
| | | | | | | | | | I made a commit that added the RTC driver to the kernel config with the intent that it would fix hctosys. Unfortunately while the RTC driver is in there, it's connected through I2C, the driver for which comes in module form and is thus loaded late. After this commit, it works fine. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* imx6: kernel: Backport serial port fixesPetr Štetiar2017-01-154-0/+249
| | | | Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: backport MIPS changes introducing a separate IRQ stackFelix Fietkau2017-01-1517-15/+312
| | | | | | | | Prevents crashes when IRQs arrive when the current kernel stack context already contains deeply nested function calls, e.g. when stacking lots of network devices on top of each other Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gitignore: add /overlayMatthias Schiffer2017-01-151-0/+1
| | | | | | | Similar to /files, /overlay is only useful for modifications not tracked in the LEDE repository itself. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath10k-firmware: Update QCA988X firmware to latest versionTimo Sigurdsson2017-01-151-4/+4
| | | | | | | | | | This patch updates the QCA988X firmware to the latest revision firmware-5.bin_10.2.4-1.0-00016 found in the official ath10k-firmware repository. Tested on TP-Link Archer C7 v2. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
* hostapd: fix passing jobserver to hostapd/supplicant build processesFelix Fietkau2017-01-151-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: backport a few upstream fixesFelix Fietkau2017-01-155-4/+163
| | | | | | | | Fixes reassoc issues with WDS mode Fixes reassoc issues in AP mode Fixes IBSS reauthentication issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, adds support for 802.11wFelix Fietkau2017-01-151-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ncurses: revert $(STAGING_DIR_HOSTPKG) to $(STAGING_DIR)/host where appropriateMatthias Schiffer2017-01-141-1/+1
| | | | | | | Host files installed in Build/InstallDev are target-specific and will stay in $(STAGING_DIR)/host after the STAGING_DIR_HOSTPKG unification. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* include/autotools.mk: use STAGING_DIR_HOSTPKG where appropriateMatthias Schiffer2017-01-141-2/+2
| | | | | | | Make sure binaries install to STAGING_DIR_HOSTPKG are still found when this variable is eventually modified. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: backport a fix for a tx related race conditionFelix Fietkau2017-01-141-0/+107
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patchesFelix Fietkau2017-01-148-109/+123
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport some upstream fixesKoen Vandeputte2017-01-143-0/+200
| | | | | | | | | | | | Backports the following upstream fixes: mac80211: initialize fast-xmit 'info' later mac80211: fix legacy and invalid rx-rate report mac80211: fix tid_agg_rx NULL dereference Compiled and tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-1341-98/+108
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imagebuilder: remove existing debug kernel imageFelix Fietkau2017-01-131-0/+1
| | | | | | Reduces tarball size and improves build time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imagebuilder: remove existing root filesystem imagesFelix Fietkau2017-01-131-0/+1
| | | | | | Reduces tarball size and improves build time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* xburst: remove hack to determine entry pointFelix Fietkau2017-01-131-6/+1
| | | | | | xburst has CONFIG_BOOT_RAW set, so jumping to the load address is valid Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: remove hack to determine entry pointFelix Fietkau2017-01-131-5/+1
| | | | | | Malta has CONFIG_BOOT_RAW set, so jumping to the load address is valid Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sdk: exclude locale files to save some spaceFelix Fietkau2017-01-131-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firewall: fix forwarding local subnet trafficJo-Philipp Wich2017-01-131-3/+3
| | | | | | | | | | | | | Packets which are merely forwarded by the router and which are neither involved in any DNAT/SNAT nor originate locally, are considered INVALID from a conntrack point of view, causing them to get dropped in the zone_*_dest_ACCEPT chains, since those only allow stream with state NEW or UNTRACKED. Remove the ctstate restriction on dest accept chains to properly pass- through unrelated 3rd party traffic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mvebu: simplify etc/board.d/02_networkPaul Wassi2017-01-132-9/+5
| | | | | | | | | Unify switch configuration on Linksys WRTxx00AC series. LAN = eth0, WAN = eth1 Signed-off-by: Paul Wassi <p.wassi@gmx.at> [Álvaro]: also change WAN LEDs Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mvsw61xx: add support for MV88E6352Imre Kaloz2017-01-132-0/+7
| | | | | | MV88E6352 is used on Linksys WRT3200ACM Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* mvebu: several fixes for Linksys WRT3200ACMÁlvaro Fernández Rojas2017-01-131-44/+40
| | | | | | | | - Fix WLAN LEDs definition. - Fix USB pinctrl definition. - Remove SDHCI definition. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mxs: gzip ext4 imagesFelix Fietkau2017-01-131-0/+3
| | | | | | Significantly reduces disk usage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: gzip rootfs image to save some spaceFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: gzip rootfs image to save some spaceFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: add generic function for gzipping images if enabledFelix Fietkau2017-01-131-0/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvebu: remove the clearfog-bundleFelix Fietkau2017-01-131-13/+1
| | | | | | It is obsoleted by proper SD card image support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: when using the new image build code, gzip ext4 images by defaultFelix Fietkau2017-01-132-2/+6
| | | | | | | | | This reduces the amount of hacks in the makefile code. Remove the apm821xx code to do the same - it was broken and left both compressed and uncompressed images in $(BIN_DIR) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* dnsmasq: use ubus signalling in ntp hotplug scriptKevin Darbyshire-Bryant2017-01-131-3/+3
| | | | | | | Use ubus process signalling instead of 'kill pidof dnsmasq' for SIGHUP signalling to dnsmasq when ntp says time is valid. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* x86: disable crashlogFelix Fietkau2017-01-132-1/+2
| | | | | | | | It could cause crashes with some forms of virtualization, and it is unlikely to work properly with most systems. It's safer to just disable it. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86: disable a workaround for a buggy glibc versionFelix Fietkau2017-01-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeon: disable ext4 imagesFelix Fietkau2017-01-131-1/+1
| | | | | | They're pretty large and squashfs images tend to be more useful anyway Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2017-01-131-3/+3
| | | | | | | This disables IGMP snooping by default, which was causing various issues over time, like FS#95 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: use LINUX_KARCH rather than ARCH for mkitsIan Pozella2017-01-132-2/+2
| | | | | | | | | | | The generated 'its' is passed to mkimage which expects linux arch strings rather than the full arch (e.g. mips not mipsel). It currently works in some cases where LINUX_KARCH == ARCH but otherwise you get an unknown arch build error. Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uqmi: mark as nonshared because of the usb dependenciesFelix Fietkau2017-01-131-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* umbim: mark as nonshared because of the usb dependenciesFelix Fietkau2017-01-131-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* comgt: mark as nonshared because of the usb dependenciesFelix Fietkau2017-01-131-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* polarssl: remove packageFelix Fietkau2017-01-132-316/+0
| | | | | | | The mbedTLS 1.3 branch has been EOL since end of 2016 and now all remaining users have been converted. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* armvirt: add kernel config change missing from 0d44f0cbFelix Fietkau2017-01-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: default to external USB power on RB-912UAGFelix Fietkau2017-01-131-1/+1
| | | | | | | | | There's a GPIO that can switch between power to USB pins for the internal MiniPCIe slot or the external USB port. People are more likely to use the external one so enable it by default. Existing configurations should be unaffected Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: let make check warn about use of legacy PKG_MD5SUM variable in feedsFelix Fietkau2017-01-131-3/+0
| | | | | | | The variable rename change has been merged in OpenWrt now, so it's possible to convert the feeds as well. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cmake: properly pass host cflags/ldflags to the buildFelix Fietkau2017-01-131-1/+2
| | | | | | | | This should hopefully fix build issues where libraries that we ship in tools/ were accidentally picked up from other places on the system, e.g. /usr/local Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cmake: support verbose build that shows compiler commandsFelix Fietkau2017-01-131-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* cmake: restore parallel build support for bootstrapFelix Fietkau2017-01-132-1/+17
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* x86/64: enable the fusion scsi driverFelix Fietkau2017-01-131-0/+6
| | | | | | | Is it used by VMware Fusion by default. This allows images to boot without further config changes in VMware. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 15:38:13 +0000