aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.106John Audia2022-03-1921-59/+49
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.105John Audia2022-03-194-19/+22
| | | | | | | | | | | | | | | Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y). Manually rebased: generic/hack-5.10/220-arm-gc_sections.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* iptables: bump PKG_RELEASEEtienne Champetier2022-03-191-1/+1
| | | | | | Following {arp,eb}tables-nft addition, bump PKG_RELEASE Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add {arp,eb}tables-nftEtienne Champetier2022-03-192-0/+145
| | | | | | | Add a patch to add some missing init_extensions{a,b}() calls Package lib{arp,eb}t_*.so Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-nft packageEtienne Champetier2022-03-191-3/+14
| | | | | | | This allows to install ip6tables-nft without iptables-nft This prepare the addition of {arp,eb}tables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: add xtables-legacy packageEtienne Champetier2022-03-191-3/+14
| | | | | | This allows to install ip6tables-legacy without iptables-legacy Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ebtables: rename to ebtables-legacyEtienne Champetier2022-03-191-14/+21
| | | | | | | | This prepare the introduction of ebtables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* arptables: rename package to arptables-legacyEtienne Champetier2022-03-191-4/+7
| | | | | | | | This prepare the introduction of arptables-nft. Add PROVIDES so dependencies are not broken, use ALTERNATIVES. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* quilt.mk: fix typo in the Host sectionRosen Penev2022-03-191-1/+1
| | | | | | | | HOST_PATCH_DIR is used for host patches, not PATCH_DIR. Fixes refreshing patches with a custom HOST_PATCH_DIR. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* cypress-firmware: update it to version 5.4.18-2021_0812Josef Schlehofer2022-03-191-38/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Binary files were renamed to cyfmac from brcmfmac, but the files needs to be on the router with the previous naming [ 6.656165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.665182] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 [ 6.674928] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin - Cypress were acquired by Infineon Technologies Thus change the project URL and switch to download files from their GitHub repository. This is much better than the previous solution, which requires finding new threads on their community forum about new driver updates, and it will be necessary to change the URL each time. Unfortunately, it seems that there is not published changelog, but according to this forum thread [1], be careful by opening the link from solution since it contains ending bracket ), it brings fixes for various security vulnerabilities, which were fixed in 7_45_234. Fixes: - FragAttacks - Kr00k Also add LICENSE file Run tested on Seeedstudio router powered by Raspberry Pi 4 CM with package cypress-firmware-43455-sdio. Before: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.895050] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43 After: root@OpenWrt:~# dmesg | grep 'Firmware: BCM4345/6' [ 6.829805] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2 [1] https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Outdated-brcmfmac-firmware-for-Raspberry-Pi-4-in-OpenWrt-21-02-1/m-p/331593#M2269 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bcm27xx: bcm2711: add kmod-usb-net-lan78xxJosef Schlehofer2022-03-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some vendors like Seeedstudio in their product [1] with Raspberry Pi Compute Module 4 uses Microchip LAN7800 (USB 3.0 to Gigabit Ethernet Bridge) - USB 3.0 extended from PCIe of CM4. lsusb output: ``` Bus 002 Device 002: ID 0424:7800 Microchip LAN7800 ``` Raspberry Pi 4 and even Compute Module 4 has many resources available and for just one kernel module it is not necessary to add additional specific CM4 profiles. Let's include it by default, so the both Ethernet ports will be usable to have better user-experience. Because previous generation of Raspberry Pi included LAN7800 Gigabit Ethernet by default and it is enabled there [2] in kernel without additional kernel module, which was added recently [3]. After this commit in dmesg can be found this: ``` root@OpenWrt:~# dmesg | grep lan [ 7.038889] lan78xx 2-3:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 7.090484] usbcore: registered new interface driver lan78xx ``` Tested and works with sysupgrade image. [1] https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html [2] https://github.com/openwrt/openwrt/blob/32c74552b2310531af593ee0f859a3935a3a7cbd/target/linux/bcm27xx/bcm2709/config-5.4#L437 [3] https://github.com/openwrt/openwrt/commit/31647d8be8c60bfb6690c87c739b8abe6dc03950 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* iwinfo: update to latest Git headJosef Schlehofer2022-03-191-3/+3
| | | | | | | | | Changelog: 90bfbb9 devices: Add Cypress CYW43455 234075b devices: fix AMD RZ608 format 0e2a318 devices: add AMD RZ608 device-id Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* bpftools: fix library path on 64 bit systemsFelix Fietkau2022-03-191-3/+3
| | | | | | | drop the use of LIB_SUFFIX Fixes: 00cbf6f6ab1d ("bpftools: update to standalone bpftools + libbpf, use the latest version") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bpftools: update to standalone bpftools + libbpf, use the latest versionFelix Fietkau2022-03-196-117/+64
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport MBSSID supportFelix Fietkau2022-03-185-7/+554
| | | | | | Required for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: enable SERIAL_8250_16550A_VARIANTSStijn Tintel2022-03-181-1/+1
| | | | | | | | | | | | | | | | | | | Kernel 5.6 introduced a new config symbol SERIAL_8250_16550A_VARIANTS. In kernel 5.8, this symbol was changed to default to on on !x86, as some embedded devices still use 16650A variants. Let's play safe here and enable this symbol in the generic config, to avoid others from running into this problem and having to spend several hours trying to bisect this problem. While we could disable the symbol in the x86 target configs, a 20ms boot time reduction really isn't worth the time wasted on bisecting this issue. Matt discovered this problem while working on adding support for the WatchGuard Firebox M200 to the qoriq target, where it caused some characters to be missing on the console output. Reported-by: Matt Fawcett <mattytap@icloud.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: improve support for GL.iNet GL-XE300Pascal Coudurier2022-03-173-1/+10
| | | | | | | | | | - fix eth0 eth1 sharing same mac so it conforms to the behavior stated in the original commit and the way it is in vendor firmware : WAN is label, LAN is label +1 and WLAN is label +2 - add default leds config - add default network config Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr>
* mpc85xx: fix missing kernel config symbol and DTS whitespace issuePetr Štetiar2022-03-172-1/+2
| | | | | | | | | | | | | Buildbot has reported following issue while crunching mpc85xx/p1010 subtarget: Extreme Networks WS-AP3825i (WS_AP3825I) [N/y/?] (NEW) Fix it by disabling that config symbol in target kernel config and while at it fix DTS whitespace issue. Fixes: 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: fritz7362sl: add partition subnode for SPI flashJan Hoffmann2022-03-161-14/+20
| | | | | | | | | | | Without a partition subnode ofpart_core still parses direct subnodes as partitions, but it ignores nodes with a compatible property. Due to this, the switch to nvmem-cells made the urlader partition inaccessible. As a result, the wireless network was broken, as the calibration data is read from that partition by a script. Fixes: #8983 Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* lantiq: fritz7362sl: fix SPI flash node reg propertyMartin Blumenstingl2022-03-161-1/+1
| | | | | | | | | | | The &spi node has #address-cells = <1> and #size-cells = <0>. Drop the extra 0 in the reg property from the SPI flash node to ensure it's number of cells matches the definition in the parent node. This also makes the reg property for the SPI flash node consistent with all other VR9 boards. Fixes: eae6cac6a30b ("lantiq: add support for AVM FRITZ!Box 7362 SL") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ipq806x: fix TP-Link Archer VR2600v bootloopingChristian Lamparter2022-03-161-1/+2
| | | | | | | | | | | | | | | | Timo Schroeder reported: "The TP-Link Archer VR2600v is stuck in a boot loop on written snapshot image. It's able to boot using the snapshot uimage though, but there ath10k firmware can't be found. 21.02.2 release version doesn't have either problem." The VR2600v has a 512 byte header at the beginning of the firmware that needs to be accounted for. Fixes: f6a01d7f5c3d ("ipq806x: convert TP-Link Archer VR2600v to denx,uimage") Reported-by: Timo Schroeder <der.timosch@gmail.com> References: <https://github.com/openwrt/openwrt/issues/9467> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mpc85xx: add support for Extreme Networks WS-AP3825iMartin Kennedy2022-03-167-1/+407
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Freescale P1020 - CPU: 2x e500v2 @ 800MHz - Flash: 64MiB NOR (1x Intel JS28F512) - Memory: 256MiB (2x ProMOS DDR3 V73CAG01168RBJ-I9H 1Gb) - WiFi1: 2.4+5GHz abgn 3x3 (Atheros AR9590) - Wifi2: 5GHz an+ac 3x3 (Qualcomm Atheros QCA9890) - ETH: 2x PoE Gigabit Ethernet (2x Atheros AR8035) - Power: 12V (center-positive barrel) or 48V PoE (active or passive) - Serial: Cisco-compatible RJ45 next to 12V power socket (115200 baud) - LED Driver: TI LV164A - LEDs: (not functioning) - 2x Power (Green + Orange) - 4x ETH (ETH1 + ETH2) x (Green + Orange) - 2x WiFi (WiFi2 + WiFi1) Installation: 1. Grab the OpenWrt initramfs <openwrt-initramfs-bin>, e.g. openwrt-mpc85xx-p1020-extreme-networks_ws-ap3825i-initramfs-kernel.bin. Place it in the root directory of a DHCP+TFTP server, e.g. OpenWrt `dnsmasq` with configuration `dhcp.server.enable_tftp='1'`. 2. Connect to the serial port and boot the AP with options e.g. 115200,N,8. Stop autoboot in U-Boot by pressing Enter after 'Scanning JFFS2 FS:' begins, then waiting for the prompt to be interrupted. Credentials are identical to the one in the APs interface. By default it is admin / new2day: if these do not work, follow the OEM's reset procedure using the reset button. 3. Set the bootcmd so the AP can boot OpenWrt by executing: ```uboot setenv boot_openwrt "cp.b 0xEC000000 0x2000000 0x2000000; interrupts off; bootm start 0x2000000; bootm loados; fdt resize; fdt boardsetup; fdt chosen; bootm prep; bootm go;" setenv bootcmd "run boot_openwrt" saveenv ``` If you plan on going back to the vendor firmware - the bootcmd for it is stored in the boot_flash variable. 4. Load the initramfs image to RAM and boot by executing ```uboot setenv ipaddr <ipv4 client address>; setenv serverip <tftp server address>; tftpboot 0x2000000 <openwrt-initramfs-bin>; interrupts off; bootm start 0x2000000; bootm loados; fdt resize; fdt boardsetup; fdt chosen; bootm prep; bootm go; ``` 5. Make a backup of the "firmware" partition if you ever wish to go back to the vendor firmware. 6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp folder. 7. Flash OpenWrt using sysupgrade. ```ash sysupgrade /tmp/<openwrt-sysupgrade-bin> ``` Notes: - We must step through the `bootm` process manually to avoid fdt relocation. To explain: the stock U-boot (and stock Linux) are configured with a very large CONFIG_SYS_BOOTMAPSZ (and the device's stock Linux kernel is configured to be able to handle it). The U-boot version predates the check for the `fdt_high` variable, meaning that upon fdt relocation, the fdt can (and will) be moved to a very high address; the default appears to be 0x9ffa000. This address is so high that when the Linux kernel starts reading the fdt at the beginning of the boot process, it encounters a memory access exception and panics[5]. While it is possible to reduce the highest address the fdt will be relocated to by setting `bootm_size`, this also has the side effect of limiting the amount of RAM the kernel can use[3]. - Because it is not relocated, the flattened device tree needs to be padded in the build process to guarantee that `fdt resize` has enough space. - The primary ethernet MAC address is stored (and set) in U-boot; they are shimmed into the device tree by 'fdt boardsetup' through the 'local-mac-address' property of the respective ethernet node, so OpenWrt does not need to set this at runtime. Note that U-boot indexes the ethernet nodes by alias, which is why the device tree explicitly aliases ethernet1 to enet2. - LEDs do not function under OpenWrt. Each of 8 LEDs is connected to an output of a TI LV164A shift register, which is wired to GPIO lines and operates through bit-banged SPI. Unfortunately, I am unable to get the spi-gpio driver to recognize the `led_spi` device tree node at all, as confirmed by patching in printk messages demonstrating spi-gpio.c::spi_gpio_probe never runs. It is possible to manually articulate the shift register by exporting the GPIO lines and stepping their values through the sysfs. - Though they do not function under OpenWrt, I have left the pinout details of the LEDs and shift register in the device tree to represent real hardware. - An archive of the u-boot and Linux source for the AP3825i (which is one device of a range of devices code-named 'CHANTRY') be found here[1]. - The device has an identical case to both the Enterasys WS-AP3725i and Adtran BSAP-2030[2] (and potentially other Adtran BSAPs). Given that there is no FCC ID for the board itself (only its WLAN modules), it's likely these are generic boards, and even that the WS-AP3725i is identical, with only a change in WLAN card. I have ordered one to confirm this. - For additional information: the process of porting the board is documented in an OpenWrt forum thread[4]. [1]: magnet:?xt=urn:btih:f5306a5dfd06d42319e4554565429f84dde96bbc [2]: https://forum.openwrt.org/t/support-for-adtran-bluesocket-bsap-2030/48538 [3]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168/29 [4]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168 [5]: https://forum.openwrt.org/t/adding-openwrt-support-for-ws-ap3825i/101168/26 Tested-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* argp-standalone: fix compilation with Alpine LinuxRosen Penev2022-03-161-1/+3
| | | | | | This package is a C89 one. Add the proper CFLAG to fix compilation. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: Align rootfs_data upgrades to 64KiB on eMMCBrian Norris2022-03-161-1/+4
| | | | | | | | | | | Rootfs overlays get created at a ROOTDEV_OVERLAY_ALIGN (64KiB) alignment after the rootfs, but emmc_do_upgrade() is assuming it comes at the very next 512-byte sector. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> (move spaces around, mention fstools' libtoolfs) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* openssl: bump to 1.1.1nMartin Schiller2022-03-161-3/+3
| | | | | | | | | | | | | This is a bugfix release. Changelog: *) Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever for non-prime moduli. (CVE-2022-0778) *) Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK (RFC 5489) to the list of ciphersuites providing Perfect Forward Secrecy as required by SECLEVEL >= 3. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ramips: add support for Netgear WN3100RPv2Rodolphe de Saint Léger2022-03-166-155/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3100RPv2 http://www.netgear.com/support/product/wn3100rpv2.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This device seems to be same hardware as a WN3000RPv3 Flash instructions: - Use the Netgear WebUI to upgrade to OpenWRT using the factory image (see note below), - Use the sysupgrade image for upgrading versions from OpenWRT, - TFTP recovery procedure can be used to flash the factory image (preferred method). Note: - The WebUI may not reboot automatically, wait at least 5 minutes before powercycling the device Flashing using TFTP: - Set you IP address to 192.168.1.10/24 (no gateway) - Connect your machine to the Ethernet port - Power off the device and wait for 10 seconds, - Hold the reset button and power on the device (do not release reset), - Hold the reset button until the green light is flashing (Approx. 15s) - launch tftp, set mode to binary and connect to 192.168.1.1 - put the factory firmware image - All leds will switch off (like a power off), this is normal - Wait for the device to reboot in the new OpenWRT image (max 5 mins) - The first boot will take longer than usual. - After boot, the Device IP on the ethernet port is 192.168.1.1 Signed-off-by: Rodolphe de Saint Léger <rdesaintleger@gmail.com> [drop unneeded includes in dts, wrap commit message] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* Revert "ramips: add support for Netgear WN3000RPv3"Sungbo Eo2022-03-166-186/+155
| | | | | | | | | This reverts commit 7bc20cb6143e089fae6ad4b173fc42b55bdbecfe. It adds support for Netgear WN3100RPv2, but the commit title is wrong. It will be re-added with the correct title. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for Netgear WN3000RPv3Rodolphe de Saint Léger2022-03-166-155/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear WN3100RPv2 http://www.netgear.com/support/product/wn3100rpv2.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This device seems to be same hardware as a WN3000RPv3 Flash instructions: - Use the Netgear WebUI to upgrade to OpenWRT using the factory image (see note below), - Use the sysupgrade image for upgrading versions from OpenWRT, - TFTP recovery procedure can be used to flash the factory image (preferred method). Note: - The WebUI may not reboot automatically, wait at least 5 minutes before powercycling the device Flashing using TFTP: - Set you IP address to 192.168.1.10/24 (no gateway) - Connect your machine to the Ethernet port - Power off the device and wait for 10 seconds, - Hold the reset button and power on the device (do not release reset), - Hold the reset button until the green light is flashing (Approx. 15s) - launch tftp, set mode to binary and connect to 192.168.1.1 - put the factory firmware image - All leds will switch off (like a power off), this is normal - Wait for the device to reboot in the new OpenWRT image (max 5 mins) - The first boot will take longer than usual. - After boot, the Device IP on the ethernet port is 192.168.1.1 Signed-off-by: Rodolphe de Saint Léger <rdesaintleger@gmail.com> [drop unneeded includes in dts, wrap commit message] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7620: Add support for D-Link DWR-961 A1Pawel Dembicki2022-03-168-172/+273
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DWR-961 A1 Wireless Router is based on the MT7620A SoC. It's a merge of two Amit boards: DWR-960 with ethernet part of Lava LR-25G001. ROMID it's taken from Telenor branded version and it works with tested device. Images from D-Link site for this router are from DWR-953 and it have ROMID DLK6E2424001. I don't know if it's mistake on web-site or if it's will require different image. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612 mpcie card) - 5x 10/100/1000 Mbps Ethernet: 4xLAN and 1xWAN (QCA8337) - 2x internal, non-detachable antennas (Wifi 2.4G) - 3x external, detachable antennas (2x LTE, 1x Wifi 5G) - 1x LTE modem cat 6 - UART (J5) header on PCB (57600 8n1) - 13x LED, 2x button - JBOOT bootloader Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* qoriq: enable I2C in target kernel configStijn Tintel2022-03-161-0/+3
| | | | | | | | | | | The I2C controller used in QorIQ PPC devices requires the mpc-i2c driver, which is enabled by the I2C_MPC kernel config symbol. Enable this and its dependencies in the target kernel config, as is done for the mpc85xx target. This fixes missing hwmon, rtc and tpm devices on the M300. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm4908: include U-Boot DTB files for ASUS GT-AX6000 & Netgear RAX220Rafał Miłecki2022-03-151-0/+34
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-bcm4908: add BCM4912 buildRafał Miłecki2022-03-153-3/+33
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-bcm4908: update to the latest genericRafał Miłecki2022-03-151-3/+3
| | | | | | | 0625aad74d arm: dts: add ASUS GT-AX6000 6fb1cb624d arm: dts: add Netgear RAXE450 / RAXE550 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-bcm4908: use "xxd" from staging_dirRafał Miłecki2022-03-151-4/+4
| | | | | | | | This fixes: bash: xxd: command not found on hosts without xxd installed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mt76: update to the latest versionFelix Fietkau2022-03-151-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 378b638c70c0 mt76: mt7915: fix unused variable with testmode disabled 4f4309542862 mt76: mt7915: only use u32_get_bits with constant value de06d828a0bf mt76: mt7921: fix injected MPDU transmission to not use HW A-MSDU c007ba3ec7a9 mt76: mt7915: simplify conditional 64c74dc93f68 mt76: fix dfs state issue with 160 MHz channels d3471b0d92c1 mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_init f4c87b32e0e9 mt76: mt7663u: introduce mt7663u_mcu_power_on routine 82de5987af54 mt76: mt7921: fix up the monitor mode c501df4086e1 mt76: mt7921: use mt76_hw instead of open coding it 594ee03d5a11 mt76: mt7915: fix DFS no radar detection event d8d2b383a241 mt76: split single ldpc cap bit into bits 0f336fba20fe mt76: mt7921: make mt7921_init_tx_queues static 00a066ce9914 mt76: mt7921: fix xmit-queue dump for usb and sdio d6d2479568b2 mt76: mt7921: fix mt7921_queues_acq implementation d17b74420199 mt76: fix monitor mode crash with sdio driver c374559eae6f mt76: mt7915: allow beaconing on all chains b219af63b9ce mt76: connac: add 6 GHz support for wtbl and starec configuration 630384cb3246 mt76: mt7915: add 6 GHz support 28ff1bddc7e8 mt76: mt7915: fix eeprom fields of txpower init values d4b226cc15e7 mt76: mt7915: add txpower init for 6GHz 31e820d4ce4b mt76: mt7921: get rid of mt7921_wait_for_mcu_init declaration 9fee1faf6028 mt76: mt7915: check for devm_pinctrl_get() failure 31a970940b97 mt76: connac: make read-only array ba_range static const e49af7036bbc mt76: use le32/16_get_bits() whenever possible 0664d39039c2 mt76: fix invalid rssi report f16fc9d96105 mt76: mt7915: set band1 TGID field in tx descriptor 67ce2708dcef mt76: mt7915: fix beamforming mib stats 6e899abec818 mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps() c6780c85cff2 mt76: mt7915: fix typos in comments aa6eadc09a83 mt76: usb: add req_type to ___mt76u_rr signature 74a519ab8353 mt76: usb: add req_type to ___mt76u_wr signature 2651d2c66cbd mt76: usb: introduce __mt76u_init utility routine c03e095eee27 mt76: mt7921: disable runtime pm for usb 41085cdcd7e3 mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usb e700aba6bae3 mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac code 056b7f4ebcc6 mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code. 0abf682a3def mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code. b0c60d5252de mt76: mt7921: add mt7921u driver 053668acdaf8 mt76: mt7921: move mt7921_init_hw in a dedicated work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: include CONFIG_KEXEC_SIG in configsPhilip Prindeville2022-03-153-1/+2
| | | | | | | | | | | | | | Seeing failure to build because of missing symbols related to provisioning CONFIG_KEXEC and signed images. Without this, if you set CONFIG_KERNEL_KEXEC=y and try to build, target/linux will hang at: scripts/kconfig/conf --syncconfig Kconfig ... kexec system call (KEXEC) [Y/n/?] y kexec file based system call (KEXEC_FILE) [Y/n/?] y Verify kernel signature during kexec_file_load() syscall (KEXEC_SIG) [N/y/?] (NEW) Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: backport DSA patches fixing null-pointer dereference for 5.10Marek Behún2022-03-152-0/+151
| | | | | | | | | Backport patches 381a730182f1 ("net: dsa: Move VLAN filtering syncing out of dsa_switch_bridge_leave") 108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering") from upstream (currently in net-next) to fix null-pointer dereference. Signed-off-by: Marek Behún <kabel@kernel.org>
* mac80211: headers: fix lockdep_assert_not_held()Petr Štetiar2022-03-152-1/+40
| | | | | | | | | | | | | | LOCK_STATE_HELD define was omitted during backport of lockdep_assert_not_held() which leads to build failures of kernels with CONFIG_LOCKDEP=y: backports-5.15.8-1/backport-include/linux/lockdep.h:16:47: error: 'LOCK_STATE_HELD' undeclared (first use in this function) Fix it by adding missing LOCK_STATE_HELD define. References: PR#9373 Reported-by: Oskari Rauta <oskari.rauta@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for Araknis AN-700-AP-I-ACMichael Pratt2022-03-136-0/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: 2AG6R-AN700APIAC Araknis AN-700-AP-I-AC is an indoor wireless access point with 1 Gb ethernet port, dual-band wireless, internal antenna plates, and 802.3at PoE+ this board is a Senao device: the hardware is equivalent to EnGenius EAP1750 the software is modified Senao SDK which is based on openwrt and uboot including image checksum verification at boot time, and a failsafe image that boots if checksum fails **Specification:** - QCA9558 SOC MIPS 74kc, 2.4 GHz WMAC, 3x3 - QCA9880 WLAN PCI card, 5 GHz, 3x3, 26dBm - AR8035-A PHY RGMII GbE with PoE+ IN - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 2x 64 MB RAM NT5TU32M16 - UART console J10, populated, RX shorted to ground - 4 antennas 5 dBi, internal omni-directional plates - 4 LEDs power, 2G, 5G, wps - 1 button reset NOTE: all 4 gpio controlled LEDS are viewed through the same lightguide therefore, the power LED is off for default state **MAC addresses:** MAC address labeled as ETH Only one Vendor MAC address in flash at art 0x0 eth0 ETH *:xb art 0x0 phy1 2.4G *:xc --- phy0 5GHz *:xd --- **Serial Access:** the RX line on the board for UART is shorted to ground by resistor R176 therefore it must be removed to use the console but it is not necessary to remove to view boot log optionally, R175 can be replaced with a solder bridge short the resistors R175 and R176 are next to the UART RX pin at J10 **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.20.253 username and password 'araknis' make a new password, login again... Navigate to 'File Management' page from left pane Click Browse and select the factory.bin image Upload and verify checksum Click Continue to confirm wait about 3 minutes Method 2: Serial to load Failsafe webpage: After connecting to serial console and rebooting... Interrupt uboot with any key pressed rapidly execute `run failsafe_boot` OR `bootm 0x9fd70000` wait a minute connect to ethernet and navigate to 192.168.20.253 Select the factory.bin image and upload wait about 3 minutes **Return to OEM:** Method 1: Serial to load Failsafe webpage (above) Method 2: delete a checksum from uboot-env this will make uboot load the failsafe image at next boot because it will fail the checksum verification of the image ssh into openwrt and run `fw_setenv rootfs_checksum 0` reboot, wait a minute connect to ethernet and navigate to 192.168.20.253 select OEM firmware image and click upgrade Method 3: backup mtd partitions before upgrade **TFTP recovery:** Requires serial console, reset button does nothing rename initramfs-kernel.bin to '0101A8C0.img' make available on TFTP server at 192.168.1.101 power board, interrupt boot with serial console execute `tftpboot` and `bootm 0x81000000` NOTE: TFTP may not be reliable due to bugged bootloader set MTU to 600 and try many times **Format of OEM firmware image:** The OEM software is built using SDKs from Senao which is based on a heavily modified version of Openwrt Kamikaze or Altitude Adjustment. One of the many modifications is sysupgrade being performed by a custom script. Images are verified through successful unpackaging, correct filenames and size requirements for both kernel and rootfs files, and that they start with the correct magic numbers (first 2 bytes) for the respective headers. Newer Senao software requires more checks but their script includes a way to skip them. The OEM upgrade script is at /etc/fwupgrade.sh OKLI kernel loader is required because the OEM software expects the kernel to be less than 1536k and the OEM upgrade procedure would otherwise overwrite part of the kernel when writing rootfs. Note on PLL-data cells: The default PLL register values will not work because of the external AR8035 switch between the SOC and the ethernet port. For QCA955x series, the PLL registers for eth0 and eth1 can be see in the DTSI as 0x28 and 0x48 respectively. Therefore the PLL registers can be read from uboot for each link speed after attempting tftpboot or another network action using that link speed with `md 0x18050028 1` and `md 0x18050048 1`. The clock delay required for RGMII can be applied at the PHY side, using the at803x driver `phy-mode` setting through the DTS. Therefore, the Ethernet Configuration registers for GMAC0 do not need the bits for RGMII delay on the MAC side. This is possible due to fixes in at803x driver since Linux 5.1 and 5.3 Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: add support for Araknis AN-500-AP-I-ACMichael Pratt2022-03-136-0/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: 2AG6R-AN500APIAC Araknis AN-500-AP-I-AC is an indoor wireless access point with 1 Gb ethernet port, dual-band wireless, internal antenna plates, and 802.3at PoE+ this board is a Senao device: the hardware is equivalent to EnGenius EAP1200 the software is modified Senao SDK which is based on openwrt and uboot including image checksum verification at boot time, and a failsafe image that boots if checksum fails **Specification:** - QCA9557 SOC MIPS 74kc, 2.4 GHz WMAC, 2x2 - QCA9882 WLAN PCI card 168c:003c, 5 GHz, 2x2, 26dBm - AR8035-A PHY RGMII GbE with PoE+ IN - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 2x 64 MB RAM NT5TU32M16 - UART console J10, populated, RX shorted to ground - 4 antennas 5 dBi, internal omni-directional plates - 4 LEDs power, 2G, 5G, wps - 1 button reset NOTE: all 4 gpio controlled LEDS are viewed through the same lightguide therefore, the power LED is off for default state **MAC addresses:** MAC address labeled as ETH Only one Vendor MAC address in flash at art 0x0 eth0 ETH *:e1 art 0x0 phy1 2.4G *:e2 --- phy0 5GHz *:e3 --- **Serial Access:** the RX line on the board for UART is shorted to ground by resistor R176 therefore it must be removed to use the console but it is not necessary to remove to view boot log optionally, R175 can be replaced with a solder bridge short the resistors R175 and R176 are next to the UART RX pin at J10 **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.20.253 username and password 'araknis' make a new password, login again... Navigate to 'File Management' page from left pane Click Browse and select the factory.bin image Upload and verify checksum Click Continue to confirm wait about 3 minutes Method 2: Serial to load Failsafe webpage: After connecting to serial console and rebooting... Interrupt uboot with any key pressed rapidly execute `run failsafe_boot` OR `bootm 0x9fd70000` wait a minute connect to ethernet and navigate to 192.168.20.253 Select the factory.bin image and upload wait about 3 minutes **Return to OEM:** Method 1: Serial to load Failsafe webpage (above) Method 2: delete a checksum from uboot-env this will make uboot load the failsafe image at next boot because it will fail the checksum verification of the image ssh into openwrt and run `fw_setenv rootfs_checksum 0` reboot, wait a minute connect to ethernet and navigate to 192.168.20.253 select OEM firmware image and click upgrade Method 3: backup mtd partitions before upgrade **TFTP recovery:** Requires serial console, reset button does nothing rename initramfs-kernel.bin to '0101A8C0.img' make available on TFTP server at 192.168.1.101 power board, interrupt boot with serial console execute `tftpboot` and `bootm 0x81000000` NOTE: TFTP may not be reliable due to bugged bootloader set MTU to 600 and try many times **Format of OEM firmware image:** The OEM software is built using SDKs from Senao which is based on a heavily modified version of Openwrt Kamikaze or Altitude Adjustment. One of the many modifications is sysupgrade being performed by a custom script. Images are verified through successful unpackaging, correct filenames and size requirements for both kernel and rootfs files, and that they start with the correct magic numbers (first 2 bytes) for the respective headers. Newer Senao software requires more checks but their script includes a way to skip them. The OEM upgrade script is at /etc/fwupgrade.sh OKLI kernel loader is required because the OEM software expects the kernel to be less than 1536k and the OEM upgrade procedure would otherwise overwrite part of the kernel when writing rootfs. Note on PLL-data cells: The default PLL register values will not work because of the external AR8035 switch between the SOC and the ethernet port. For QCA955x series, the PLL registers for eth0 and eth1 can be see in the DTSI as 0x28 and 0x48 respectively. Therefore the PLL registers can be read from uboot for each link speed after attempting tftpboot or another network action using that link speed with `md 0x18050028 1` and `md 0x18050048 1`. The clock delay required for RGMII can be applied at the PHY side, using the at803x driver `phy-mode` setting through the DTS. Therefore, the Ethernet Configuration registers for GMAC0 do not need the bits for RGMII delay on the MAC side. This is possible due to fixes in at803x driver since Linux 5.1 and 5.3 Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: add support for Araknis AN-300-AP-I-NMichael Pratt2022-03-136-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: U2M-AN300APIN Araknis AN-300-AP-I-N is an indoor wireless access point with 1 Gb ethernet port, dual-band wireless, internal antenna plates, and 802.3at PoE+ this board is a Senao device: the hardware is equivalent to EnGenius EWS310AP the software is modified Senao SDK which is based on openwrt and uboot including image checksum verification at boot time, and a failsafe image that boots if checksum fails **Specification:** - AR9344 SOC MIPS 74kc, 2.4 GHz WMAC, 2x2 - AR9382 WLAN PCI on-board 168c:0030, 5 GHz, 2x2 - AR8035-A PHY RGMII GbE with PoE+ IN - 40 MHz clock - 16 MB FLASH MX25L12845EMI-10G - 2x 64 MB RAM 1839ZFG V59C1512164QFJ25 - UART console J10, populated, RX shorted to ground - 4 antennas 5 dBi, internal omni-directional plates - 4 LEDs power, 2G, 5G, wps - 1 button reset NOTE: all 4 gpio controlled LEDS are viewed through the same lightguide therefore, the power LED is off for default state **MAC addresses:** MAC address labeled as ETH Only one Vendor MAC address in flash at art 0x0 eth0 ETH *:7d art 0x0 phy1 2.4G *:7e --- phy0 5GHz *:7f --- **Serial Access:** the RX line on the board for UART is shorted to ground by resistor R176 therefore it must be removed to use the console but it is not necessary to remove to view boot log optionally, R175 can be replaced with a solder bridge short the resistors R175 and R176 are next to the UART RX pin at J10 **Installation:** Method 1: Firmware upgrade page: (if you cannot access the APs webpage) factory reset with the reset button connect ethernet to a computer OEM webpage at 192.168.20.253 username and password 'araknis' make a new password, login again... Navigate to 'File Management' page from left pane Click Browse and select the factory.bin image Upload and verify checksum Click Continue to confirm wait about 3 minutes Method 2: Serial to load Failsafe webpage: After connecting to serial console and rebooting... Interrupt uboot with any key pressed rapidly execute `run failsafe_boot` OR `bootm 0x9fd70000` wait a minute connect to ethernet and navigate to 192.168.20.253 Select the factory.bin image and upload wait about 3 minutes **Return to OEM:** Method 1: Serial to load Failsafe webpage (above) Method 2: delete a checksum from uboot-env this will make uboot load the failsafe image at next boot because it will fail the checksum verification of the image ssh into openwrt and run `fw_setenv rootfs_checksum 0` reboot, wait a minute connect to ethernet and navigate to 192.168.20.253 select OEM firmware image and click upgrade Method 3: backup mtd partitions before upgrade **TFTP recovery:** Requires serial console, reset button does nothing rename initramfs-kernel.bin to '0101A8C0.img' make available on TFTP server at 192.168.1.101 power board, interrupt boot with serial console execute `tftpboot` and `bootm 0x81000000` NOTE: TFTP may not be reliable due to bugged bootloader set MTU to 600 and try many times **Format of OEM firmware image:** The OEM software is built using SDKs from Senao which is based on a heavily modified version of Openwrt Kamikaze or Altitude Adjustment. One of the many modifications is sysupgrade being performed by a custom script. Images are verified through successful unpackaging, correct filenames and size requirements for both kernel and rootfs files, and that they start with the correct magic numbers (first 2 bytes) for the respective headers. Newer Senao software requires more checks but their script includes a way to skip them. The OEM upgrade script is at /etc/fwupgrade.sh OKLI kernel loader is required because the OEM software expects the kernel to be less than 1536k and the OEM upgrade procedure would otherwise overwrite part of the kernel when writing rootfs. Note on PLL-data cells: The default PLL register values will not work because of the external AR8035 switch between the SOC and the ethernet port. For QCA955x series, the PLL registers for eth0 and eth1 can be see in the DTSI as 0x28 and 0x48 respectively. Therefore the PLL registers can be read from uboot for each link speed after attempting tftpboot or another network action using that link speed with `md 0x18050028 1` and `md 0x18050048 1`. The clock delay required for RGMII can be applied at the PHY side, using the at803x driver `phy-mode` setting through the DTS. Therefore, the Ethernet Configuration registers for GMAC0 do not need the bits for RGMII delay on the MAC side. This is possible due to fixes in at803x driver since Linux 5.1 and 5.3 Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ath79: improve factory.bin for some Senao devicesMichael Pratt2022-03-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | Some boards with firmware made with Senao SDK based on Linux 3.3 have the following lines in the OEM upgrade script at /etc/fwupgrade.sh local append="" local CONF_TAR="/tmp/sysupgrade.tgz" [ -f "$CONF_TAR" ] && append="-j $CONF_TAR" and \# check FWINFO filename [ -z $(ls FWINFO* | grep -i ${modelname}) ] && errcode="1" This addition also prevents needing to factory reset after flashing for some boards that also have these lines in the script \# Support downgrade but do default (Smart v2.x.x.x -> senaowrt v1.x.x.x) [ $(ls FWINFO* | grep -i ${modelname} | cut -d "-" -f4 | cut -c 2) -lt 2 ] && append="" Signed-off-by: Michael Pratt <mcpratt@pm.me>
* realtek: add support for Panasonic Switch-M8eG PN28080KINAGAKI Hiroshi2022-03-133-0/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Panasonic Switch-M8eG PN28080K is a 8 + 1 port gigabit switch, based on RTL8380M. Specification: - SoC : Realtek RTL8380M - RAM : DDR3 128 MiB (Winbond W631GG8KB-15) - Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G) - Ethernet : 10/100/1000 Mbps x8 + 1 - port 1-8 : TP, RTL8218B (SoC) - port 9 : SFP, RTL8380M (SoC) - LEDs/Keys : 7x / 1x - UART : RS-232 port on the front panel (connector: RJ-45) - 3:TX, 4:GND, 5:GND, 6:RX (pin number: RJ-45) - 9600n8 - Power : 100-240 VAC, 50/60 Hz, 0.5 A - Plug : IEC 60320-C13 - Stock OS : VxWorks based Flash instruction using initramfs image: 1. Prepare the TFTP server with the IP address 192.168.1.111 2. Rename the OpenWrt initramfs image to "0101A8C0.img" and place it to the TFTP directory 3. Download the official upgrading firmware (ex: pn28080k_v30000.rom) and place it to the TFTP directory 4. Boot M8eG and interrupt the U-Boot with Ctrl + C keys 5. Execute the following commands and boot with the OpenWrt initramfs image rtk network on tftpboot 0x81000000 bootm 6. Backup mtdblock files to the computer by scp or anything and reboot 7. Interrupt the U-Boot and execute the following commands to re-create filesystem in the flash ffsmount c:/ ffsfmt c:/ this step takes a long time, about ~ 4 mins 8. Execute the following commands to put the official images to the filesystem updatert <official image> example: updatert pn28080k_v30000.rom this step takes about ~ 40 secs 9. Set the environment variables of the U-Boot by the following commands setenv loadaddr 0xb4e00000 setenv bootcmd bootm saveenv 10: Download the OpenWrt initramfs image and boot with it tftpboot 0x81000000 0101A8C0.img bootm 11: On the initramfs image, download the sysupgrade image and perform sysupgrade with it sysupgrade <imagename> 12: Wait ~ 120 seconds to complete flashing Note: - "Switch-M8eG" is a model name, and "PN28080K" is a model number. Switch-M8eG has an another (old) model number ("PN28080"), it's not a Realtek based hardware. - Switch-M8eG has a "POWER" LED (Green), but it's not connected to any GPIO pin. - The U-Boot checks the runtime images in the flash when booting and fails to execute anything in "bootcmd" variable if the images are not exsisting. - A filesystem is formed in the flash (0x100000-0x1DFFFFF) on the stock firmware and it includes the stock images, configuration files and checksum files. It's unknown format, can't be managed on the OpenWrt. To get the enough space for OpenWrt, move the filesystem to the head of "fs_reserved" partition by execution of "ffsfmt" and "updatert". - On the other devices in the same series of Switch-M8eG PN28080K, the INT pin on the PCA9555 is not connected to anywhere. Back to the stock firmware: 1. Delete "loadaddr" variable and set "bootcmd" to the original value on U-Boot: setenv loadaddr setenv bootcmd 'bootm 0x81000000' on OpenWrt: fw_setenv loadaddr fw_setenv bootcmd 'bootm 0x81000000' 2. Perform reset or reboot on U-Boot: reset on OpenWrt: reboot Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sander Vanheule <sander@svanheule.net>
* realtek: enable pca953x driver for rtl838x subtargetINAGAKI Hiroshi2022-03-131-0/+3
| | | | | | | | | | The system status LED on Panasonic Switch-M8eG PN28080K is connected to a PCA9539PW. To use the LED as a status LED of OpenWrt while booting, enable the pca953x driver and built-in to the kernel. Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Acked-by: Sander Vanheule <sander@svanheule.net>
* realtek: add ZyXEL GS1900-24 v1 supportMartin Kennedy2022-03-133-0/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24 v1 is a 24 port switch with two SFP ports, similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24 v1 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB * RAM: Winbond W9751G8KB-25 64 MiB DDR2 SDRAM * Ethernet: 24x 10/100/1000 Mbps, 2x SFP 100/1000 Mbps * LEDs: * 1 PWR LED (green, not configurable) * 1 SYS LED (green, configurable) * 24 ethernet port link/activity LEDs (green, SoC controlled) * 2 SFP status/activity LEDs (green, SoC controlled) * Buttons: * 1 "RESET" button on front panel (soft reset) * 1 button ('SW1') behind right hex grate (hardwired power-off) * Power: 120-240V AC C13 * UART: Internal populated 10-pin header ('J5') providing RS232; connected to SoC UART through a SIPEX 3232EC for voltage level shifting. * 'J5' RS232 Pinout (dot as pin 1): 2) SoC RXD 3) GND 10) SoC TXD Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware > Management * If "Active Image" has the first option selected, OpenWrt will need to be flashed to the "Active" partition. If the second option is selected, OpenWrt will need to be flashed to the "Backup" partition. * Navigate to Maintenance > Firmware > Upload * Upload the openwrt-realtek-rtl838x-zyxel_gs1900-24-v1-initramfs-kernel.bin file by your preferred method to the previously determined partition. When prompted, select to boot from the newly flashed image, and reboot the switch. * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24-v1-squashfs-sysupgrade.bin U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on > Since the GS1900-24 v1 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only be installed in the first partition anyway (hardcoded in the DTS). To ensure we are set to boot from the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x81f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24-v1-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24-v1-squashfs-sysupgrade.bin Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* kernel/modules: add kmod-inet-diag packageTianling Shen2022-03-131-0/+25
| | | | | | | Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: bump 5.10 to 5.10.104John Audia2022-03-134-14/+14
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* tools/ccache: update to 4.6Rosen Penev2022-03-131-2/+2
| | | | | | Full changelog: https://ccache.dev/releasenotes.html#_ccache_4_6 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/fakeroot: update to 1.28Rosen Penev2022-03-132-3/+3
| | | | | | | | Refreshed patches. Upstream says there's only a bugfix for GNU Hurd. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/cmake: update to 3.22.3Rosen Penev2022-03-131-2/+2
| | | | | | Seems to be mostly pthread fixes. Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 11:25:55 +0000