aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* e2fsprogs: Update to version 1.46.5Hauke Mehrtens2022-02-013-32/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 8788 badblocks_1.45.6-2_mips_24kc.ipk 8861 badblocks_1.46.5-1_mips_24kc.ipk 3652 chattr_1.45.6-2_mips_24kc.ipk 3657 chattr_1.46.5-1_mips_24kc.ipk 58128 debugfs_1.45.6-2_mips_24kc.ipk 60279 debugfs_1.46.5-1_mips_24kc.ipk 8551 dumpe2fs_1.45.6-2_mips_24kc.ipk 8567 dumpe2fs_1.46.5-1_mips_24kc.ipk 4797 e2freefrag_1.45.6-2_mips_24kc.ipk 4791 e2freefrag_1.46.5-1_mips_24kc.ipk 159790 e2fsprogs_1.45.6-2_mips_24kc.ipk 168212 e2fsprogs_1.46.5-1_mips_24kc.ipk 7083 e4crypt_1.45.6-2_mips_24kc.ipk 7134 e4crypt_1.46.5-1_mips_24kc.ipk 5749 filefrag_1.45.6-2_mips_24kc.ipk 6233 filefrag_1.46.5-1_mips_24kc.ipk 4361 libcomerr0_1.45.6-2_mips_24kc.ipk 4355 libcomerr0_1.46.5-1_mips_24kc.ipk 168040 libext2fs2_1.45.6-2_mips_24kc.ipk 174209 libext2fs2_1.46.5-1_mips_24kc.ipk 8514 libss2_1.45.6-2_mips_24kc.ipk 8613 libss2_1.46.5-1_mips_24kc.ipk 3148 lsattr_1.45.6-2_mips_24kc.ipk 3227 lsattr_1.46.5-1_mips_24kc.ipk 22530 resize2fs_1.45.6-2_mips_24kc.ipk 22909 resize2fs_1.46.5-1_mips_24kc.ipk 33315 tune2fs_1.45.6-2_mips_24kc.ipk 34511 tune2fs_1.46.5-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Update to version 2.37.3Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | This release fixes two security mount(8) and umount(8) issues: CVE-2021-3996 Improper UID check in libmount allows an unprivileged user to unmount FUSE filesystems of users with similar UID. CVE-2021-3995 This issue is related to parsing the /proc/self/mountinfo file allows an unprivileged user to unmount other user's filesystems that are either world-writable themselves or mounted in a world-writable directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Do not build raw any more.Hauke Mehrtens2022-02-011-0/+1
| | | | | | | | | | | | | The man page of the raw tool does not build because the disk-utils/raw.8 file is missing. It looks like it should be in the tar.xz file we download, but it is missing. We do not package the raw tool, so this is not a problem. This fixes the following build error: No rule to make target 'disk-utils/raw.8', needed by 'all-am'. Stop. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 289764 strace_5.14-1_mips_24kc.ipk 310899 strace_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 795f420 cmis: Rename CMIS parsing functions 369b43a cmis: Initialize CMIS memory map da16288 cmis: Use memory map during parsing 6acaeb9 cmis: Consolidate code between IOCTL and netlink paths d7d15f7 sff-8636: Rename SFF-8636 parsing functions 4230597 sff-8636: Initialize SFF-8636 memory map b74c040 sff-8636: Use memory map during parsing 799572f sff-8636: Consolidate code between IOCTL and netlink paths 9fdf45c sff-8079: Split SFF-8079 parsing function 2ccda25 netlink: eeprom: Export a function to request an EEPROM page 86792db cmis: Request specific pages for parsing in netlink path 6e2b32a sff-8636: Request specific pages for parsing in netlink path c2170d4 sff-8079: Request specific pages for parsing in netlink path 9538f38 netlink: eeprom: Defer page requests to individual parsers 664586e Merge branch 'review/next/module-mem-map' into master 50fdaec ethtool: Set mask correctly for dumping advertised FEC modes c5e7133 cable-test: Fix premature process termination 73091cd sff-8636: Use an SFF-8636 specific define for maximum number of channels 837c166 sff-common: Move OFFSET_TO_U16_PTR() to common header file 8658852 cmis: Initialize Page 02h in memory map 27b42a9 cmis: Initialize Banked Page 11h in memory map 340d88e cmis: Parse and print diagnostic information eae6a99 cmis: Print Module State and Fault Cause 82012f2 cmis: Print Module-Level Controls d7b1007 sff-8636: Print Power set and Power override bits 429f2fc Merge branch 'review/cmis-diag' into master 32457a9 monitor: do not show duplicate options in help text c01963e Release version 5.16. The sizes of the ipk changed on MIPS 24Kc like this: 34317 ethtool_5.15-1_mips_24kc.ipk 34311 ethtool_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: Update to version 2.16.12Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This fixes the following security problems: * Zeroize several intermediate variables used to calculate the expected value when verifying a MAC or AEAD tag. This hardens the library in case the value leaks through a memory disclosure vulnerability. For example, a memory disclosure vulnerability could have allowed a man-in-the-middle to inject fake ciphertext into a DTLS connection. * Fix a double-free that happened after mbedtls_ssl_set_session() or mbedtls_ssl_get_session() failed with MBEDTLS_ERR_SSL_ALLOC_FAILED (out of memory). After that, calling mbedtls_ssl_session_free() and mbedtls_ssl_free() would cause an internal session buffer to be free()'d twice. CVE-2021-44732 The sizes of the ipk changed on MIPS 24Kc like this: 182454 libmbedtls12_2.16.11-2_mips_24kc.ipk 182742 libmbedtls12_2.16.12-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gdb: Update gdb to version 11.2Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This is a minor corrective release over GDB 11.1, fixing the following issues: * PR sim/28302 (gdb fails to build with glibc 2.34) * PR build/28318 (std::thread support configure check does not use CXX_DIALECT) * PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) * PR tui/28483 ([gdb/tui] breakpoint creation not displayed) * PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) * PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) * PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) * PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) The sizes of the ipk changed on mips 24Kc like this: 2285775 gdb_11.1-3_mips_24kc.ipk 2287441 gdb_11.2-4_mips_24kc.ipk 191828 gdbserver_11.1-3_mips_24kc.ipk 191811 gdbserver_11.2-4_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gdb: Update to version 11.2Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | This is a minor corrective release over GDB 11.1, fixing the following issues: * PR sim/28302 (gdb fails to build with glibc 2.34) * PR build/28318 (std::thread support configure check does not use CXX_DIALECT) * PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) * PR tui/28483 ([gdb/tui] breakpoint creation not displayed) * PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) * PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) * PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) * PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ramips: add support for ipTIME AX2004M"Stijn Tintel2022-02-015-197/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f4a79148f8cb ("ramips: add support for ipTIME AX2004M") seems to leak KERNEL_LOADADDR 0x82000000 to other devices, causing the to no longer boot. The leak is visible in u-boot: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0x840000e4 Data Size: 10750165 Bytes = 10.3 MiB Architecture: MIPS OS: Linux Load Address: 0x82000000 Entry Point: 0x82000000 Normally, it should look like this: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0xbfca00e4 Data Size: 2652547 Bytes = 2.5 MiB Architecture: MIPS OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Revert the commit to avoid more people soft-bricking their devices. This reverts commit f4a79148f8cbb7dfbcddfb0c1128caec45a01596. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm4908: backport first 5.18 DTS changesRafał Miłecki2022-02-017-40/+424
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: af8a059bb41d ("ath79: add support for GL.iNet GL-XE300") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq806x: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: f44e933458b1 ("ipq806x: provide WiFI mac-addresses from dts") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: improve support for Dongwon T&I DW02-412HSungbo Eo2022-02-015-75/+60
| | | | | | | | | * Move &nand node to DTSI * Utilize nvmem for fetching caldata * Rename build recipe, clean before build * Simplify KERNEL definition Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* linux-firmware: intel: add firmware for AX210Sungbo Eo2022-01-311-7/+15
| | | | | | | | Add the most recent supported firmware file for Intel Wi-Fi 6E AX210 wireless chip. The API version 67 is not yet supported by the driver. Additional PNVM file is required since API version 62. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ubox: fix broken deferred start of logfile writerDaniel Golle2022-01-311-9/+1
| | | | | | | | | Just use 'start' action which will have the desired effect instead of trying to introduce a 'start_file' action which didn't work that way because procd jshn magic would have to wrap around it. Fixes: 88baf6ce2c ("ubox: only start log to file when filesystem has been mounted") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: simplify partition generationDaniel Golle2022-01-311-6/+1
| | | | | | | | | The two options 'emmc' and 'sdmmc' now became identical lines after introducing CONFIG_TARGET_ROOTFS_PARTSIZE. Remove the now useless if-clauses. Fixes: a40b4d335a ("mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZE") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: seccomp/jail: Fix build error on arm with glibcDaniel Golle2022-01-311-3/+3
| | | | | | | | | | | | | | | | | | From: Peter Lundkvist <peter.lundkvist@gmail.com> This fixes the make_syscall_h.sh script to recognize both __NR_Linux, used by mips, and __NR_SYSCALL_BASE and __ARM_NR_BASE used by arm. Run-tested on arm (ipq806x) and mips (ath79), both with glibc. Compile-tested and checked resulting syscall_names.h file wuth glibc: aarch64, powerpc, x86_64, i486 musl: arm, mips Fixes: FS#4194, FS#4195 Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: u7623-02: enable early console also in legacy imageDaniel Golle2022-01-311-1/+1
| | | | | | | | Append 'earlycon=uart8250,mmio32,0x11004000' to the boot arguments embedded in device-tree in order to enable early console on the UniElec U7623 board when using the vendor/stock bootloader. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: backport bcm_sf2 patch for better LED registers supportRafał Miłecki2022-01-316-4/+422
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fixup pinctrl patches for kernel 5.4Rafał Miłecki2022-01-312-7/+8
| | | | | Fixes: b0145891676f ("bcm4908: backport BCM4908 pinctrl driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport BCM4908 pinctrl driverRafał Miłecki2022-01-316-0/+1492
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to 2.34 HEADHans Dedecker2022-01-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 72123e1b56 NEWS: Add a bug entry for BZ #28755 08beb3a3f4 x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755] b50d5b746c x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755] 1b9cd6a721 NEWS: add bug entry for BZ #28769 and BZ #28770 3438bbca90 Linux: Detect user namespace support in io/tst-getcwd-smallbuff d084965adc realpath: Avoid overwriting preexisting error (CVE-2021-3998) 472e799a5f getcwd: Set errno to ERANGE for size == 1 (CVE-2021-3999) 8c8a71c85f tst-realpath-toolong: Fix hurd build f7a79879c0 realpath: Set errno to ENAMETOOLONG for result larger than PATH_MAX [BZ #28770] 73c362840c stdlib: Fix formatting of tests list in Makefile 269eb9d930 stdlib: Sort tests in Makefile 062ff490c1 support: Add helpers to create paths longer than PATH_MAX 82b1acd9de powerpc: Fix unrecognized instruction errors with recent binutils 1d401d1fcc x86: use default cache size if it cannot be determined [BZ #28784] 6890b8a3ae CVE-2022-23218: Buffer overflow in sunrpc svcunix_create (bug 28768) 1081f1d3dd sunrpc: Test case for clnt_create "unix" buffer overflow (bug 22542) 7b5d433fd0 CVE-2022-23219: Buffer overflow in sunrpc clnt_create for "unix" (bug 22542) 5575daae50 socket: Add the __sockaddr_un_set function 03e6e02e6a Disable debuginfod in printer tests [BZ #28757] 705f1e4606 Update syscall lists for Linux 5.16 2fe2af88ab i386: Remove broken CAN_USE_REGISTER_ASM_EBP (bug 28771) 73558ffe84 Update syscall lists for Linux 5.15 e64235ff42 powerpc: Fix unrecognized instruction errors with recent GCC Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ubox: only start log to file when filesystem has been mountedDaniel Golle2022-01-301-3/+25
| | | | | | | | | If log_file is on an filesystem mounted using /etc/config/fstab we have to wait for that to happen before starting the logread process. Inhibit the start of the file-writer process and use a mount trigger to fire it up once the filesystem actually becomes available. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: support generic mount triggers and clean upDaniel Golle2022-01-301-11/+9
| | | | | | | | Allow init scripts to trigger free-form actions by exposing procd_add_action_mount_trigger. Clean up mount trigger wrappers while at it to reduce code duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: ASUS RP-AC66 use flash till the endTamas Balogh2022-01-302-2/+2
| | | | | | | | | | | | This makes available the additional space, which was occupied by OEM's jffs2 partition before: "0x000000f80000-0x000001000000 : jffs2" Reverting to the OEM firmware will also recover this partition, i.e. it is not needed and can be used by OpenWrt. Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com>
* ramips: add support for Wavlink WL-WN535K1Davide Fioravanti2022-01-304-0/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wavlink WL-WN535K1 is a "mesh" router with 2 gigabit ethernet ports and one fast ethernet port. Mine is branded as Talius TAL-WMESH1. It can be found in kits of 2 or 3 (WL-WN535K2 or WL-WN535K3). The motherboard is labelled as WS-WN535G3-B-V1.2 so this image could potentially work for WL-WN535G3R and WS-WN535G3R with little to none effort, but it's untested. Hardware -------- SoC: Mediatek MT7620A RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CS) ETH: - 2x 10/100/1000 Mbps Ethernet (RTL8211F) - 1x 10/100 Mbps Ethernet (integrated in SOC) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 internal antennas BTN: - 1x Reset button - 1x Touchlink button (set to WPS) - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 3x Green leds (ethernet port status/act) UART: - 57600-8-N-1 Everything works correctly. Currently there is no firmware update available. Because of this, in order to restore the OEM firmware, you must firstly dump the OEM firmware from your router before you flash the OpenWrt image. Backup the OEM Firmware ----------------------- The following steps are to be intended for users having little to none experience in linux. Obviously there are many ways to backup the OEM firmware, but probably this is the easiest way for this router. Procedure tested on WN535K1_V1510_200916 firmware version. 1) Go to http://192.168.10.1/webcmd.shtml 2) Type the following line in the "Command" input box and then press enter: mkdir /etc_ro/lighttpd/www/dev; dd if=/dev/mtd0ro of=/etc_ro/lighttpd/www/dev/mtd0ro 3) After few seconds in the textarea should appear this output: 16384+0 records in 16384+0 records out If your output doesn't match mine, stop reading and ask for help in the forum. 4) Open in another tab http://192.168.10.1/dev/mtd0ro to download the content of the whole NOR. If the file size is 0 byte, stop reading and ask for help in the forum. 5) Come back to the http://192.168.10.1/webcmd.shtml webpage and type: rm /etc_ro/lighttpd/www/dev/mtd0ro;for i in 1 2 3 4 5; do dd if=/dev/mtd${i}ro of=/etc_ro/lighttpd/www/dev/mtd${i}ro; done 6) After few seconds, in the textarea should appear this output: 384+0 records in 384+0 records out 128+0 records in 128+0 records out 128+0 records in 128+0 records out 14720+0 records in 14720+0 records out 1024+0 records in 1024+0 records out If your output doesn't match mine, stop reading and ask for help in the forum. 7) Open the following links to download the partitions of the OEM FW: http://192.168.10.1/dev/mtd1ro http://192.168.10.1/dev/mtd2ro http://192.168.10.1/dev/mtd3ro http://192.168.10.1/dev/mtd4ro http://192.168.10.1/dev/mtd5ro If one (or more) of these files are 0 byte, stop reading and ask for help in the forum. 8) Store these downloaded files in a safe place. 9) Reboot your router to remove any temporary file in ram. Installation ------------ Flash the initramfs image in the OEM firmware interface (http://192.168.10.1/update_mesh.shtml). When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Restore OEM Firmware -------------------- Flash the "mtd4ro" file you previously backed-up directly from LUCI. Warning: Remember to not keep settings! Warning2: Remember to force the flash. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:E2 (factory @ 0x28) WAN XX:XX:XX:XX:XX:E3 (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:E4 (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:E5 (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:E5 2) The OEM firmware upgrade page accepts only files containing the string "WN535K1" in the filename. 3) Additional notes 1,2,3 in the WS-WN583A6 commit are still valid (https://github.com/openwrt/openwrt/commit/92780d80ab6f5f03fac2407c06eb267dd83914a1) Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> [remove trailing whitespace] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* CI: add formal checksPaul Spooren2022-01-292-0/+96
| | | | | | | | | | | The formal checks verify the following things: - Commits does not contain any merge commits - Signed by a real name - Commit titles starts with an `<area>:` - Author name matches signed of name - Commit message is not empty Signed-off-by: Paul Spooren <mail@aparcar.org>
* ramips: add support for ipTIME AX2004MSungbo Eo2022-01-295-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME AX2004M is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specification: * SoC: MT7621A * RAM: 256 MiB * Flash: NAND 128 MiB * Wi-Fi: * MT7915D: 2.4/5 GHz (DBDC) * Ethernet: 5x 1GbE * Switch: SoC built-in * USB: 1x 3.0 * UART: J4 (115200 baud) * Pinout: [3V3] (TXD) (RXD) (GND) MAC address: | interface | MAC | source | comment |-----------|-------------------|----------------|--------- | LAN | 58:XX:XX:00:XX:9B | | [1] | WAN | 58:XX:XX:00:XX:99 | | | WLAN 2G | 58:XX:XX:00:XX:98 | factory 0x4 | | WLAN 5G | 5A:XX:XX:40:XX:98 | | | | | | | | 58:XX:XX:00:XX:98 | config ethaddr | [1] Used in this patch as WLAN 5G MAC address with the local bit set Load address: * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry Installation via **recovery** mode: 1. Press reset button, power up the device, wait >10s for CPU LED to stop blinking. 2. Upload recovery image through the recovery web page at 192.168.0.1. Revert to stock firmware: 1. Install stock image via recovery mode. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: make the relocation address configurableSungbo Eo2022-01-291-1/+1
| | | | | | | | | If no argument is given to relocate-kernel, KERNEL_LOADADDR will be used just as before. This is a preparation for ramips support of ipTIME AX2004M. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: add support for ipTIME NAS1dualSungbo Eo2022-01-294-0/+337
| | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mvebu: remove duplicate CONFIG_POWER_RESET entriesSungbo Eo2022-01-293-6/+1
| | | | | | | The option is already enabled in the target config since 9149ed4f05f8 ("mvebu: cortexa9: Add support for Ctera C200-V2"). Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-295-4/+3
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for ipTIME NAS1Sungbo Eo2022-01-297-0/+270
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: rework 02_networkSungbo Eo2022-01-291-42/+67
| | | | | | | Just like other targets do, introduce two setup functions for interfaces and MAC addresses. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: drop kernel 5.4 supportSungbo Eo2022-01-2920-1937/+0
| | | | | | | It has been 3 months since we switched this target to 5.10, now we can remove the 5.4 files. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: move bootargs-append patch to genericSungbo Eo2022-01-294-7/+7
| | | | | | | | | | This moves bootargs-append support patch from ipq40xx and ipq806x to generic. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This is a preparation for kirkwood support of ipTIME NAS1. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* firmware-utils: bump to git HEADSungbo Eo2022-01-291-3/+3
| | | | | | | 0c15cad iptime-naspkg: add image header tool for ipTIME NAS series 872c87c iptime-crc32: add image header tool for new ipTIME models Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* util-linux: add lslocksRoman Azarenko2022-01-281-0/+16
| | | | | | This change adds the "lslocks" utility from util-linux. Signed-off-by: Roman Azarenko <roman.azarenko@iopsys.eu>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-2818-77/+35
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.173John Audia2022-01-281-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* netfilter.mk: add conntrack support to nft bridgeEtienne Champetier2022-01-281-0/+1
| | | | | | | | | This allows to implement statefull bridge filtering As the uncompressed size is only 7.6k (arm64), just add nf_conntrack_bridge.ko to kmod-nft-bridge package Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* octeontx: Refresh kernel configurationHauke Mehrtens2022-01-281-7/+1
| | | | | | | Refresh the kernel configuration. No manual changes done. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add CONFIG_CRYPTO_DEV_OCTEONTX_CPT kernel config optionHauke Mehrtens2022-01-281-0/+1
| | | | | | | This new kernel configuration option is available when building the octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix compile warningHauke Mehrtens2022-01-282-4/+8
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* arc770: Remove arc770 targetHauke Mehrtens2022-01-2811-412/+1
| | | | | | | | | | | | | | | | | The arc700 target is not booting up since some time, see here: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/400 It looks like there is a problem in the toolchain when using glibc. Currently no one is working on fixing this problem, remove the target instead. This target also does not have many users we are aware of. If someone wants to have this target back, feel free to add a fixed version of this target again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-01-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | 16a1070 fw4.uc: handle zone masq6 option 5f61dbf ruleset: fix chain selection for mark and dscp targets 0bc844b ruleset: properly deal with wildcards in zone device selectors 101988d fw4: fix family comparisons 127dbc0 ruleset: emit AF specific rules for DSCP matches d63cb89 fw4: fix parsing inverted numeric DSCP values 8c8a867 fw4: fix wrong `parse_network()` return value on `parse_subnet()` failure f85bb2d ruleset: consolidate zone matches for raw_prerouting and raw_output chains 5669bc7 fw4: consolidate device grouping logic 94f03e0 ruleset: properly render redirect targets without port fff9779 fw4: fix family selection logic for redirect rules ca88fcd tests: update interface dump mock data e60bb4b ruleset: support non-contiguous address masks 8fec51a fw4: fix potential crashes when parsing invalid redirect sections c08eb44 fw4: fix redirect destination zone resolving 0df6ba0 fw4: fix address selection logic for DNAT reflection rules 60a2518 tests: add test coverage for redirect rules e479eff fw4: add RFC-8622 'Least Effort' (LE) DSCP mark ac8a737 ruleset: remove redundant syn check bd5dc4b tests: run testcases in strict mode 3ee6a5c ruleset: fix undeclared variable access uncovered by strict mode Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-01-282-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | c6dae42 LICENSE: add ISC license file 402f603 lib: introduce struct library dcb6ffd struct: fix PowerPC specific compiler pragma name a0512ea treewide: fix typo in exported function names and types eaaaf88 nl80211: fix wiphy dump reply merge logic e6efadb fs: add utility functions 54ef6c0 nl80211: fix premature netlink reply receive abort 07802f3 syntax: disallow keywords in object property shorthand notation 3489b75 vm: support object property access on resource value types dc8027c types: consider resource prototypes when marking reachable objects 5680fab treewide: fix upvalue reference type name 0d29b25 treewide: fix "resource" misspellings 99fdafd vm: introduce value registry 66f7c00 ubus: add support for async requests 5c77dd5 fs: implement fdopen(), file.fileno() and proc.fileno() b605dbf treewide: rework numeric value handling 599d233 vallist: store double values in a platform neutral manner 5bb9ab7 struct: reuse double packing routines from core 2fd7ab5 vm: optimize string concatenation eafa321 lib: implement uniq() function 6b2e79a types: add initial infrastructure for function serialization 725bb75 compiler, vm: use a program wide constant list 6c2caf9 source: refactor source file handling 371ba45 program: implement support for precompiling source files 3578afe build: support building without compile capabilities 61d0a34 lib: replace usages of vasprintf() with xvasprintf() 03b6a8e syntax: drop legacy syntax support 01132db lib: fix %J string formats with precision specifier 3f44c42 lib: rework format string handling a1b3c5d struct: implement `*` format, fix invalid memory accesses 34a04a2 run_tests.sh: fix exitcode evaluation abe38e7 run_tests.sh: add ability to define environment variables for testcases 04fa2ba tests: reorganize testcase files 6a55d10 lib: fix exists() error return value aa860a3 vm: fix `null` loose equality/inequality checks 3f6d199 vallist: uc_number_parse(): parse empty strings as `0`, not `NaN` ddc5aa7 vm: fix NaN strict equality tests Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: enable I2C_CHARDEV in mt7621/config-5.10Stijn Tintel2022-01-281-0/+1
| | | | | | | | I2C_CHARDEV used to be enabled in mt7621/config-5.4. Enable it in the 5.10 config, as it's required for PoE control on Unifi Switch Flex. Fixes: b4aad29a1d7a ("ramips: add support for kernel 5.10") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-282-181/+1
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* firmware-utils: update to git HEAD of 2022-01-28Daniel Golle2022-01-281-3/+3
| | | | | | | 6c95945 ptgen: add Chromium OS kernel partition support 8e7274e cros-vbutil: add Chrome OS vboot kernel-signing utility Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 08:22:44 +0000