aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* imx6: image: ventana: Add missing BOOT_SCRIPT variablePetr Štetiar2018-11-251-0/+1
| | | | | | | | | | This is probably theoretical problem as the Ventana is defined first in the image Makefile, but once the position of the definition would change in the future (alphabetical sorting?) it would get bootscript from the previous board which would have BOOT_SCRIPT set. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* strace: update to 4.25Syrone Wong2018-11-251-2/+2
| | | | Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* ramips: select kmod-mt76x0e for TP-Link ArcherC20i and wr902ac-v3Daniel Golle2018-11-252-1/+2
| | | | | | | | | Both devices come with a MediaTek MT7610E 5GHz 802.11ac 1T1R radio which wasn't supported at the time the devices were added to OpenWrt. Now that we got it, include kmod-mt76x0e in images for those devices. Reported-by: Arian Sanusi <openwrt@semioptimal.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: enable CONFIG_BRIDGE_VLAN_FILTERINGDaniel Golle2018-11-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to use the bridge as a managed switch and gracefully handle mixed tagged and untagged frames. Prior to this, the only alternative was creating one bridge per vlan which quickly becomes a nightmare and still won't let you mix both tagged and untagged frames on the physical port without some complex ebtables magic. This is in line with the notion that OpenWRT is the network go-to swiss army knife when you need a nice set-and-forget, low maintenance box to handle a specific task. Current builds of the ip-bridge package already fully support this feature so the only requirement is enabling the kernel config. This is disabled by default so existing bridge configurations will not be affected. This patch only gives the ability to turn it on with an 'ip link' command. If there is interest, I could look into making the feature accessible via uci configuration. It causes about 3.1% hit on raw bridging speed, which is relatively trivial considering that I had to use 300 byte packets to strain the CPU enough to notice a slowdown at all. The ER8 would chug along at wire speed otherwise, and that's using only one core. Since the typical bridge use case on OpenWRT is wireless, I doubt it would be noticeable at all. With BRIDGE_VLAN_FILTERING iperf -u -c 192.168.1.105 -b 1G -l 300 ------------------------------------------------------------ Client connecting to 192.168.1.105, UDP port 5001 Sending 300 byte datagrams, IPG target: 2.24 us (kalman adjust) UDP buffer size: 208 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.12 port 58045 connected with 192.168.1.105 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 977 MBytes 820 Mbits/sec [ 3] Sent 3414986 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 811 MBytes 680 Mbits/sec 0.000 ms 581210/3414986 (0%) Without BRIDGE_VLAN_FILTERING iperf -u -c 192.168.1.105 -b 1G -l 300 ------------------------------------------------------------ Client connecting to 192.168.1.105, UDP port 5001 Sending 300 byte datagrams, IPG target: 2.24 us (kalman adjust) UDP buffer size: 208 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.12 port 36645 connected with 192.168.1.105 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 977 MBytes 820 Mbits/sec [ 3] Sent 3414990 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 836 MBytes 701 Mbits/sec 0.000 ms 493950/3414990 (0%) In terms of kernel size, it uses 16KB (6753K vs 6737K on ER8) so a 0.002% hit. The exact 16KB is probably just due to how the kernel is compressed. Suggested-by: Jonathan Thibault <jonathan@navigue.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uclient: update to latest Git headJo-Philipp Wich2018-11-241-3/+3
| | | | | | 3ba74eb uclient-http: properly handle HTTP redirects via proxy connections Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: specify "firmware" partition format for Ubiquiti UniFiRafał Miłecki2018-11-241-0/+1
| | | | | | | | | | | | This affects: 1. Ubiquiti UniFi-AC-LITE/LR 2. Ubiquiti UniFi-AC-PRO 3. Ubiquiti UniFi-AC-MESH 4. Ubiquiti UniFi-AC-MESH PRO Succesfully tested on UniFi AP AC Pro. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: specify "firmware" partition format for WNDR3700 and v2Hannu Nyman2018-11-242-0/+2
| | | | | | | | Specify the new "firmware" partition format for Netgear WNDR3700 and WNDR3700v2 similarly as ffd082aa did for WNDR3800, the third device in the family. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ath79: specify "firmware" partition format for TP-LINK Archer C7 v2Rafał Miłecki2018-11-241-1/+2
| | | | | | With this change it doesn't require trying parsers one by one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: drop unused arch_split_mtd_part()Rafał Miłecki2018-11-248-52/+18
| | | | | | | No single target/arch uses it and most likely there is no need to make such a potential code target/arch specific. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add missing version.h include to the TP-LINK parserRafał Miłecki2018-11-241-0/+1
| | | | | Fixes: a29c8d685be7 ("kernel: add DT binding support to the TP-LINK parser") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the TP-LINK parserRafał Miłecki2018-11-241-0/+10
| | | | | | It allows triggering it directly by specifying format in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: specify "firmware" partition format for Netgear WNDR3800Rafał Miłecki2018-11-241-0/+1
| | | | | | It doesn't require trying parsers one by one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the uimage parsersRafał Miłecki2018-11-241-0/+21
| | | | | | It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: don't auto-split "firmware" if it has "compatible" DT propertyRafał Miłecki2018-11-248-18/+20
| | | | | | | | | If "compatible" is being used that should trigger a proper parser directly. It's more reliable thanks to not trying parsers one by one. In such case partition shouldn't be split automatically to avoid parsing it twice. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: b53: register switch on probeDavid Bauer2018-11-231-22/+21
| | | | | | | | | | | | | Currently, the b53 MDIO switch driver registers the switch on config-init and not on device probe. Because of this, the switch gets added every time the associated interface comes up. This commit fixes this behavior by registering the switch on device probe. Compile- and run-tested on OCEDO Koala. Signed-off-by: David Bauer <mail@david-bauer.net>
* tools: tplink-safeloader: add C7v5 EU SupportListDavid Bauer2018-11-231-1/+5
| | | | | | | | | | Currently flash from WebIF is broken for Archer C7 v5 EU models as their SupportList entries are missing. The added entries originate from TP-Links latest Archer C7 v5 EU firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* procd: update to latest git HEADHans Dedecker2018-11-231-3/+3
| | | | | | d667354 early: set /tmp permissions explicitly Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* rpcd: update to latest Git headJo-Philipp Wich2018-11-221-2/+2
| | | | | | c79ef22 main: fix logic bug when not specifying a timeout option Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* rpcd: update to latest Git headJo-Philipp Wich2018-11-223-4/+10
| | | | | | | | | | 2cc4b99 file: use global exec timeout instead of own hardcoded limit ecd1660 exec: increase maximum execution time to 120s Also expose the socket and timeout options in /etc/config/rpcd for easier use. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix unkillable processes after restartLinus Kardell2018-11-221-0/+1
| | | | | | | | | | | | | | | When restart is run on an init script, the script traps SIGTERM. This is done as a workaround for scripts named the same name as the program they start. In that case, the init script process will have the same name as the program process, and so when the init script runs killall, it will kill itself. So SIGTERM is trapped to make the init script unkillable. However, the trap is retained when the init script runs start, and thus processes started by restart will not respond to SIGTERM, and will thus be unkillable unless you use SIGKILL. This fixes that by removing the trap before running start. Signed-off-by: Linus Kardell <linus@telliq.com>
* kernel: bump 3.18 to 3.18.126Koen Vandeputte2018-11-223-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested: adm5120 Runtime-tested: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.82Koen Vandeputte2018-11-225-8/+8
| | | | | | | | | | | Refreshed all patches. Compile-tested: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.9 to 4.9.138Koen Vandeputte2018-11-223-4/+4
| | | | | | | | | Refreshed all patches. Compile-tested: ar71xx, layerscape Runtime-tested: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: request Seama parser on DIR-885L directlyRafał Miłecki2018-11-222-1/+25
| | | | | | | | It's more reliable as mtd subsystem doesn't have to blindly try that parser. It allows disabling MTD_SPLIT_FIRMWARE completely (TRX is handled in a similar way). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the Seama parserRafał Miłecki2018-11-221-0/+13
| | | | | | It allows specifying that parser directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to latest 2.27 commitHans Dedecker2018-11-221-2/+2
| | | | | | | 1517dfb8aa Add an additional test to resolv/tst-resolv-network.c 1050634904 libanl: properly cleanup if first helper thread creation failed (bug 22927) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-11-211-3/+3
| | | | | | | | | | | | 4734108 mt7603: use mt7603_wtbl_clear on station removal 9428e34 mt7603: fix watchdog reset sequence b3f82a3 mt7603: report PSE reset failures via debugfs a301dec mt7603: add back PSE client reset code 94cebfc mt7603: fix handling lost interrupt events during watchdog reset b38fe7d mt7603: only issue PSE reset on PSE stuck da666a7 mt7603: issue PSE reset if firmware debug register indicates stuck queues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-11-201-4/+4
| | | | | | | | | | | | | | | | | 471d397 mt7603: fix priority for buffered multicast packets 3873e82 mt7603: fix MT_BMAP_0/MT_GROUP_THD_0 register initializion for mt7628 749d5c3 mt7603: fix reserved page handling for mt7628 d22799b mt7603: reduce reserved pages for beacons 42c5281 mt7603: fix maximum frame size in scheduler init fa7335b mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues 84aa12a mt76: fix potential null pointer deref in mt76_sta_add 7c4c33c mt7603: skip efuse tx power data for mt7628 ca2c875 mt7603: add support for accessing remapped registers via ops b44d793 mt7603: clear PSE redirections before MCU init 82363ab mt7603: move tx status to rx queue 0 c09e8a4 mt7603: fix buffering of tx packets for powersave clients Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move diff adding run_parsers_by_type() between mtd patchesRafał Miłecki2018-11-204-80/+80
| | | | | | | | It makes more sense to add run_parsers_by_type() in a patch that introduces parser types. That makes the other one just add a code using it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: don't export parse_mtd_partitions_by_type() in 4.9 and 4.14Rafał Miłecki2018-11-2010-66/+56
| | | | | | That function isn't used anywhere out of the mtdpart.c & can be static. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* wireguard: bump to 0.0.20181119Jason A. Donenfeld2018-11-191-2/+2
| | | | | | | | | | | | | | | | | | | * chacha20,poly1305: fix up for win64 * poly1305: only export neon symbols when in use * poly1305: cleanup leftover debugging changes * crypto: resolve target prefix on buggy kernels * chacha20,poly1305: don't do compiler testing in generator and remove xor helper * crypto: better path resolution and more specific generated .S * poly1305: make frame pointers for auxiliary calls * chacha20,poly1305: do not use xlate This should fix up the various build errors, warnings, and insertion errors introduced by the previous snapshot, where we added some significant refactoring. In short, we're trying to port to using Andy Polyakov's original perlasm files, and this means quite a lot of work to re-do that had stableized in our old .S. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: drop mtd_pad_erasesize() helper from 4.9 and 4.14Rafał Miłecki2018-11-192-38/+2
| | | | | | | It has been last used in kernel 3.18 for uimage and squashfs splitters embedded in the mtdpart.c. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to latest git HEADHans Dedecker2018-11-191-3/+3
| | | | | | | | | 4b83102 treewide: switch to C-code style comments 70506bf treewide: make some functions static d9872db interface: fix removal of dynamic interfaces 2f7ef7d interface: rework code to get rid of interface_set_dynamic Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: fix TP-Link Archer C7 v5 switch LEDsRinki Kumari2018-11-171-3/+15
| | | | Signed-off-by: Rinki Kumari <rinki13@gmail.com>
* mt76: update to the latest versionFelix Fietkau2018-11-161-3/+3
| | | | | | 96b3b3d mt76x2u: main: fix typo setting sta_state mac80211 callback Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-11-161-3/+3
| | | | | | | | | | | | | | | 009ab91 mt76: clean up more unused EXPORT_SYMBOLs 963768d mt76x02: fix regression in tx station race condition fix d7788cc mt76: mt76x02: make group_wcid the first member in struct mt76x02_vif e65ad4c mt7603: make group_wcid the first member in struct mt7603_vif 7b1373e mt76: mt76x02: remove mt76x02_txq_init a97127b mt76: replace sta_add/remove ops with common sta_state function 13f1e82 mt7603: clear wtbl entry for removed stations 90e2c1b mt7603: add mt7603_wtbl_set_skip_tx, change mt7603_wtbl_set_ps users 41931e4 mt7603: toggle skip_tx on station add/remove d0fdf01 mt7603: avoid unnecessary wtbl writes for ps-filter Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20181115Jason A. Donenfeld2018-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Zinc no longer ships generated assembly code. Rather, we now bundle in the original perlasm generator for it. The primary purpose of this snapshot is to get testing of this. * Clarify the peer removal logic and make lifetimes more precise. * Use READ_ONCE for is_valid and is_dead. * No need to use atomic when the recounter is mutex protected. * Fix up macros and annotations in allowedips. * Increment drop counter when staged packets are dropped. * Use static constants instead of enums for 64-bit values in selftest. * Mark large constants as ULL in poly1305-donna64. * Fix sparse warnings in allowedips debugging code. * Do not use wg_peer_get_maybe_zero in timer callbacks, since we now can carefully control the lifetime of these functions and ensure they never execute after dropping the last reference. * Cleanup hashing in ratelimiter. * Do not guard timer removals, since del_timer is always okay. * We now check for PM_AUTOSLEEP, which makes the clear*on-suspend decision a bit more general. * Set csum_level to ~0, since the poly1305 authenticator certainly means that no data was modified in transit. * Use CHECKSUM_PARTIAL check for skb_checksum_help instead of skb_checksum_setup check. * wg.8: specify that wg(8) shows runtime info too * wg.8: AllowedIPs isn't actually required * keygen-html: add missing glue macro * wg-quick: android: do not choke on empty allowed-ips Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* util-linux: Update to 2.33Daniel Engberg2018-11-152-5/+5
| | | | | | | Update util-linux to 2.33 Refresh patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ar71xx: add support for Gainstrong MiniBox V3.2Pau Escrich2018-11-1511-0/+153
| | | | | | | | | | | | Adds MiniBox V3.2 ar71xx target (QCA99531 + QCA9887) Info: http://oolite.cn/minibox-v3-2-qca9531-qca9887-module-pin-specification.html Reference patch: http://oolite.cn/wp-content/uploads/2017/09/minibox_v3_cc15.05_20160325.patch Installation: Upload firmware to uboot via HTTP at 192.168.1.1 (press button for 5 seconds) Signed-off-by: Pau Escrich <p4u@dabax.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (daniel@makrotopia.org: rebased and fixed conflicts, fixed LED name, added ath10k eeprom)
* kernel: fix ubifs loosing O_TMPFILE data after power cutRafał Miłecki2018-11-151-0/+89
| | | | | | | | | | | There was a bug in ubifs related to the O_TMPFILE. When reapplying changes after power cut data could be lost. This problem was exposed by overlayfs and the upstream commit 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up"). This fixes a regression introduced when switching from 4.9 to 4.14. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bison: update to 3.2.1Hans Dedecker2018-11-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Chnages since 3.2: b590ad02 version 3.2.1 05e70adf build: fix issues in the generated tarball 7efe0b5d build: fix typo 351e3630 NEWS: update 4fd1fc70 examples: ship them e02ce4c7 build: minor fixes in doc/ 7cab285e CI: maximize chances of errors sooner 86efe282 c++: improve the generated documentation cf1446dc tests: don't fail if the C++ compiler does not work e93c40b3 tests: don't disable C++ warnings in C files eff67391 c++: workaround portability issue 5a0d7802 tests: work around getopt portability issues f1e0839c doc: -Wzero-as-null-pointer-constant was added to GCC 4.7 3bf429ae examples: #include <cstring> in calc++ f8cadc73 c: provide a definition of _Noreturn that works for C++ bd7aebb8 c: update the definition of _Noreturn ca8039e6 tests: don't expect the shell to support 'local' 5d07f4f7 bitset: fix warning e605ad96 build: fix use of gnulib Make variables 50fac71d maint: post-release administrivia Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* hostapd: add utf8_ssid flag & enable as defaultKevin Darbyshire-Bryant2018-11-142-3/+5
| | | | | | | | | | | | | SSIDs may contain UTF8 characters but ideally hostapd should be told this is the case so it can advertise the fact. Default enable this option. add uci option utf8_ssid '0'/'1' for disable/enable e.g. config wifi-iface option utf8_ssid '0' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.14 to 4.14.81Koen Vandeputte2018-11-1412-75/+28
| | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed patches: - 081-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch Altered patches: - 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events Compile-tested on: cns3xxx, imx6, ipq806x, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.137Koen Vandeputte2018-11-1446-115/+104
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed hunks in: - 703-phy-support-layerscape.patch Compile-tested on: ar71xx, layerscape Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.125Koen Vandeputte2018-11-144-19/+19
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Compile-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/pkg-config: Handle variable substitution of 'bindir' to redirect to ↵Ted Hess2018-11-131-1/+1
| | | | | | STAGING_DIR/bin Signed-off-by: Ted Hess <thess@kitschensync.net>
* mt76: update to the latest versionFelix Fietkau2018-11-131-3/+3
| | | | | | | | | | | | | | | | | | | 6745830 mt76: fix race condition in station removal 7e5c819 mt76: add mt76_sta_remove helper 75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev fd85ff9 mt7603: use mt76_sta_remove helper 0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling 83a80ca mt76: request tx status for powersave released EOSP packet df5c797 mt76: fix uninitialized mutex access setting rts threshold 0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine 4248446 mt76x0: pci: enable VHT rates in IBSS mode f75efd8 mt76x2u: phy: add TX_SHAPING calibration c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch 9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine 3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine 88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix spurious disconnections with powersave clientsFelix Fietkau2018-11-131-0/+26
| | | | | | Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.14 to 4.14.80Stijn Tintel2018-11-132-3/+3
| | | | | | | | | Refresh patches. Compile-tested: ar71xx, ath79, x86/64 Runtime-tested: ar71xx, ath79, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop old bluetooth config symbolsStijn Tintel2018-11-121-13/+1
| | | | | | They do not exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:20:34 +0000