aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* arm-trusted-firmware-mediatek: remove {e,sd}mmc headersDaniel Golle2021-03-031-20/+0
| | | | | | | | Turned out those are simply MBR with active boot partition. And not needed at all on emmc. Remove them as ptgen can now generate hybrid MBR sufficient to boot MT7622 from SD Card. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: change image generationOskari Lemmela2021-03-031-7/+6
| | | | | | | - set only one EFI system partition - use shorter path for DEVICE_DTS file Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: mt7622: use ptgen generated MBR headerOskari Lemmela2021-03-031-2/+2
| | | | | | | mt7622 uses MBR partition for booting from SD card. Add hybrid MBR entry with boot flag after PMBR entry. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* firmware-utils/ptgen: change GPT to LBA addressingOskari Lemmela2021-03-031-13/+20
| | | | | | | | | Do not align partitions with sectors. Only kb align for GPT is supported. Use 254 heads and 63 sectors for PMBR. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* firmware-utils/ptgen: add support for hybrid MBROskari Lemmela2021-03-031-11/+28
| | | | | | | | | | | Adding -H option copies partition to MBR after pmbr entry. Max 3 partitions can be copied to MBR. Hybrid MBR is needed only in special cases. For example mt7622 SD card boot needs MBR entry with boot flag enabled. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* firmware-utils/ptgen: fix partition guid and nameOskari Lemmela2021-03-031-2/+3
| | | | | | | guid and name function should be called before storing partition info. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* firmware-utils/ptgen: fix compile warningsOskari Lemmela2021-03-031-2/+2
| | | | | | remove extra arguments from printf message Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* fstools: update to git HEADDaniel Golle2021-03-021-3/+3
| | | | | | 19d7d93 libfstools: partname: several fixes Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2021-03-021-3/+3
| | | | | | 64e9f3a procd: fix compilation with newer musl Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: update to git HEADDaniel Golle2021-03-021-3/+3
| | | | | | 2e52c7e libubox: fix BLOBMSG_CAST_INT64 (do not override BLOBMSG_TYPE_DOUBLE) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: switch to upstream brcmnand patchÁlvaro Fernández Rojas2021-03-021-4/+8
| | | | | | This patch has been accepted upstream for v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Revert "toolchain: add autoconf-lean"Daniel Golle2021-03-025-1838/+1
| | | | | | | | autoconf-lean was not ready yet. Revert it until things get sorted. This reverts commit 32c664ff02910bf39a3fbd5a5a4a8bff3191dd03. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "build: use config.site generated by autoconf-lean, drop hardcoded ↵Daniel Golle2021-03-0220-1/+535
| | | | | | | | sitefiles" This reverts commit f439e291304a93b982e912dc91b80ca950a594f3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "toolchain/autoconf-lean: add check for ssize_t"Daniel Golle2021-03-021-2/+1
| | | | | | This reverts commit 6b7b064492ddf339d0213779fb84d50ee3dc5eb7. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel-5.10: backport chacha non block size optimizationsJason A. Donenfeld2021-03-022-0/+310
| | | | | | | | | | These make a big difference when doing WireGuard with small armv7 routers, and the 5.4 backport already has it. Suggested-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel-5.4: backport fd16931a2f51 for chacha neonJason A. Donenfeld2021-03-02126-329/+336
| | | | | | | | | | | | | | Without this patch, the chacha block counter is not incremented on neon rounds, resulting in incorrect calculations and corrupt packets. This also switches to using `--no-numbered --zero-commit` so that future diffs are smaller. Reported-by: Hans Geiblinger <cybrnook2002@yahoo.com> Reviewed-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* bcm53xx: add support for reading NVRAM based on DT mappingRafał Miłecki2021-03-022-0/+141
| | | | | | | This is required for devices that use NVRAM data for detecting currently used firmware partition (e.g. Linksys devices). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-mediatek: bpi-r64: make sure eMMC installation runs only onceDaniel Golle2021-03-021-3/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: make sure image generation can run in parallelDaniel Golle2021-03-022-12/+7
| | | | | | | | The previous approach of referencing artifacts in follow-up artifacts can't work with parallel builds in the current way image.mk is built. Refactor things so this is not needed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: blue LED should be active high as wellDaniel Golle2021-03-011-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: bpi-r64: fix eMMC installation menu labelDaniel Golle2021-03-011-1/+1
| | | | | | Change boot menu label for eMMC installation to tell what it does now. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: bpi-r64: fix sysupgrade on empty diskDaniel Golle2021-03-011-1/+8
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: bpi-r64: simplify eMMC install procedureDaniel Golle2021-03-013-11/+18
| | | | | | | | Write everything needed for eMMC install into the gaps between partitions on SD card. In that way, installation to eMMC only needs the SD card, no additional files need to be loaded via TFTP any more. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add the latest mtd patch extending ofpart parserRafał Miłecki2021-03-0114-65/+717
| | | | | | | | | | | | This adds the latest version of ofpart commit. It hopefully 1. Doesn't break compilation 2. Doesn't break partitioning (this time). It's required to implement fixed partitioning with some quirks. It's required by bcm53xx, bcm4908, kirkwood, lantiq and mvebu. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* tools/xxd: fix source URLDaniel Golle2021-03-011-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bmips: switch to upstream SMP CPU mappings patchÁlvaro Fernández Rojas2021-03-011-5/+7
| | | | | | The patch has been accepted upstream with some minor modifications. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: prevent dupes in autotools.mkSebastian Kemper2021-03-011-5/+6
| | | | | | | | | | | | | | | | | | | | autotools.mk does not have any protection currently that would prevent it from being sourced multiple times. Note that both package.mk and host-build.mk source autotools.mk. So any package Makefile that includes both will cause hooks to be added twice (at least twice). This is fixed by declaring a new variable, __autotools_inc, and only continuing if this variable doesn't equal 1. The same is done by rules.mk already. Also, this commit does away with an ifneq that checks PKG_FIXUP (instead of HOST_FIXUP) for patch-libtool before adding to the host pre-configure hook. This does not make sense. The second ifneq is amended. The current one manually does what the define patch_libtool_host is already doing. It can just use the define. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* toolchain/autoconf-lean: add check for ssize_tSebastian Kemper2021-03-011-1/+2
| | | | | | | This was provided by the old static config.site files and is required by some software, i.e. freeswitch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* tools: xxd: use more convenient source tarballDaniel Golle2021-03-011-20/+6
| | | | | | | Don't download all of vim just to build xxd. Use a tight tarball containing only xxd sources instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: enable CONFIG_SPI_MTK_NORDaniel Golle2021-03-011-1/+1
| | | | | | Somehow this got disabled in the transition to 5.10. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: rename mt7622-ubi to mt7622-rfb1-ubiDaniel Golle2021-03-011-3/+3
| | | | | | | This profile is meant to be used on MT7622 rfb1 AP, indicate that in the name to make things less confusing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: backport Ethernet driver fixes from the 5.12Rafał Miłecki2021-03-014-2/+103
| | | | | | The most noticeable one is fix for RX stopping on high traffic. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: fix spelling 'seperate' -> 'separate'Daniel Golle2021-02-2812-22/+22
| | | | | | | This popular spelling mistake was also introduced by myself lately. Fix it everywhere. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: P2P: Fix a corner case in peer addition based on PD RequestStefan Lippers-Hollmann2021-03-011-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | p2p_add_device() may remove the oldest entry if there is no room in the peer table for a new peer. This would result in any pointer to that removed entry becoming stale. A corner case with an invalid PD Request frame could result in such a case ending up using (read+write) freed memory. This could only by triggered when the peer table has reached its maximum size and the PD Request frame is received from the P2P Device Address of the oldest remaining entry and the frame has incorrect P2P Device Address in the payload. Fix this by fetching the dev pointer again after having called p2p_add_device() so that the stale pointer cannot be used. This fixes the following security vulnerabilities/bugs: - CVE-2021-27803 - A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range. Fixes: 17bef1e97a50 ("P2P: Add peer entry based on Provision Discovery Request") Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* mpc85xx: p2020: Fix nand driver probePawel Dembicki2021-03-011-1/+9
| | | | | | | | | | | | | | | At this moment driver start fail with error: [ 3.771991] fsl,elbc-fcm-nand: probe of ffa00000.nand failed with error -22 elbc-fcm-nand driver use legacy method of ecc mode detection. It detect hw/sw ecc mode when system configure it to "none". [1] This patch adds 'nand-ecc-mode = "none"' propoerty to use generic driver ecc mode detection. [1] https://elixir.bootlin.com/linux/v5.10.18/source/drivers/mtd/nand/raw/fsl_elbc_nand.c#L730 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: add testing kernel 5.10Pawel Dembicki2021-03-013-4/+1
| | | | | | | | Subtargets p1010 and p1020 have already added. Compile and run tested on: P2020RDB Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mpc85xx: p2020: fix cfi-nor detectionPawel Dembicki2021-03-011-0/+1
| | | | | | | | | | | | | | | At this moment p2020rdb has broken images, because NOR memory connected to eLBC bus isn't detected. In 642b1e8dbed7 linux tree commit, config dependencies of MTD_PHYSMAP_OF was changed and now MTD_PHYSMAP is required. This patch adds MTD_PHYSMAP option to kernel config in p2020 subtarget and fix booting of p2020rdb. Fixes: 13b1db795f05 ("mpc85xx: add support for kernel 5.4") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* x86: add support for AWS T3 instancesAlberto Bursi2021-03-013-2/+20
| | | | | | | | | | | | | | | | | Amazon AWS T3 cloud instances require kernel support for the Elastic Fabric Adapter to access storage and for Elastic Network Adapter to use network interfaces. Since the Fabric Adapter is needed to access root filesystem, enable in x86_64 kernel. Elastic Network Adapter goes in a module, and add this module to default list in x86_64. The module is set to AutoLoad because AutoProbe does not seem to load it. Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
* igmpproxy: update to version 0.3Jan Pavlinec2021-03-011-11/+3
| | | | | | | | | Changes: - Remove custom Build/Compile because it's no longer needed - Remove std=gnu99 which is added automaticaly by igmpproxy if needed - Remove -Dlog from CFLAGS because igmpproxy doesn't have log function Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
* libunwind: Add MIPS64 dep checkDonald Hoskins2021-03-011-1/+1
| | | | | | | | | | | libunwind dependency check does not allow for MIPS64 arch. Add MIPS64 awareness. libunwind seems to support MIPS64 without issues, it was limited by the dep arch check in the Makefile. Used to compile Suricata6/Rust locally without issue. Signed-off-by: Donald Hoskins <grommish@gmail.com>
* uboot-sunxi: add missing type __u64Georgi Valkov2021-03-011-0/+10
| | | | | | | | | | | | | | | Non Linux systems e.g. macOS lack the __u64 type and produce build errors: In file included from tools/aisimage.c:9: In file included from include/image.h:19: In file included from ./arch/arm/include/asm/byteorder.h:29: In file included from include/linux/byteorder/little_endian.h:13: include/linux/types.h:146:9: error: unknown type name '__u64'; did you mean '__s64'? typedef __u64 __bitwise __le64; Resolved by declaring __u64 in include/linux/types.h Build tested on macOS and Ubuntu. Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
* bpftools: update to latest stable 5.11.2Tony Ambardar2021-03-012-7/+2
| | | | | | | Compile and run-tested on malta/mip32be, using bpftool directly and also libbpf (linked with tc) to inspect and load simple eBPF programs. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* iproute2: update to 5.11.0Tony Ambardar2021-03-0111-29/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest iproute2 version brings various improvements and fixes: https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/log/?qt=range&q=v5.10.0..v5.11.0 In particular, ip and tc now use libbpf as the standard way to load BPF programs, rather than the old, limited custom loader. This allows more consistent and featureful BPF program handling e.g. support for global initialized variables. Also fix a longstanding problem with iproute2 builds where unneeded DSO dependencies are added to most utilities, bloating their installation footprint. From research and testing, explicitly using a "--as-needed" linker flag avoids the issue. Update accordingly and drop extra package dependencies from Makefile. Additional build and packaging updates include: - install missing development header to iproute2/bpf_elf.h - propagate OpenWrt verbose flag during build - update and refresh patches Compile and run tested: QEMU/malta-mips32be on kernels 5.4 & 5.10. All iproute2 packages were built and installed to the test image. Some regression testing using ip-full and tc was successfully performed to exercise several kmods, tc modules, and simple BPF programs. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* ramips: fix partition layout of hiwifi hc5x61Shiji Yang2021-03-011-5/+5
| | | | | | | | | | | | | | | | | | | | Changes: * Increase "oem" partition size from 0x10000 to 0x20000 * Correct partition lables, synchronize with official firmware Evidence: It should be the same as hiwifi hc5x61a and the fact indeed the case. Here is part of dmesg boot log read from official firmware: [ 1.470000] Creating 7 MTD partitions on "raspi": [ 1.470000] 0x000000000000-0x000000030000 : "u-boot" [ 1.480000] 0x000000030000-0x000000040000 : "hw_panic" [ 1.490000] 0x000000040000-0x000000050000 : "Factory" [ 1.490000] 0x000000fc0000-0x000000fe0000 : "oem" [ 1.500000] 0x000000fe0000-0x000000ff0000 : "bdinfo" [ 1.510000] 0x000000ff0000-0x000001000000 : "backup" [ 1.510000] 0x000000050000-0x000000fc0000 : "firmware" Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* libpcap: update to 1.10.0Rosen Penev2021-03-017-109/+73
| | | | | | | | | | | | | | | | | | | | | Simplify cmake option handling by putting everything in blocks. Add openssl patch as there's no easy way to disable. Rebase the skip manpages patch. Remove the monitor mode patch as it no longer applies. Remove flex patch as normal Makefile is no longer used. Remove USB path patch. While it is deprecated, the codepath is never taken. /sys/bus/usb/devices is checked before hand. If it exists, the function does stuff and returns. Additionally, this path is used elsewhere in the code. Refresh other patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel/zram: remove obsolete symbolRui Salvaterra2021-03-011-1/+0
| | | | | | | | | Zsmalloc page table mappings are dead and gone [1]. Drop the respective kconfig symbol. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.4.y&id=69dc72f058c9b98f9b66bed184cfab7c2e9f49b0 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* busybox: sysntpd: option to bind server to ifaceAlexey Dobrovolsky2021-03-011-2/+10
| | | | | | | | | | | NTPD in busybox has option -I to bind server to IFACE. However, capabilities of the busybox are limited, the -I option cannot be repeated and only one interface can be effectively specified in it. This option is currently not configurable via UCI. The patch adds an interface option to the system config, ntp section. Also sort options for uci_load_validate alphabetically. Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
* mvebu/omnia: fix the device treeRui Salvaterra2021-03-013-0/+165
| | | | | | | | | | | Backport [1] and fix [2] hardware buffer management. Also fix the IRQ storm caused by a misconfiguration of the PCA9538 interrupt pin [3]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/armada-385-turris-omnia.dts?id=018b88eee1a2efda26ed2f09aab33ccdc40ef18f [2] https://lore.kernel.org/linux-arm-kernel/20210217153038.1068170-1-rsalvaterra@gmail.com/ [3] https://lore.kernel.org/linux-arm-kernel/20210220231144.32325-1-kabel@kernel.org/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* uboot-envtools: adjust compile patch to version v2021.01Ronny Kotzschmar2021-03-011-2/+2
| | | | | | | with u-boot v2020.07 some variables have been renamed so this patch needs to be adjusted otherwise at least with macOS as build system there are build errors Signed-off-by: Ronny Kotzschmar <ro.ok@me.com>
* lantiq: vr9: set the usb led trigger via devicetreeMathias Kresin2021-03-016-26/+36
| | | | | | | | | | Assign the usbdev trigger via devicetree and drop the userspace handling of the usb leds. Drop the now unused userspace helper code as well. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:15:09 +0000