aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood: switch to kernel 5.10Adrian Schmutzler2021-10-091-2/+1
| | | | | | | This target has testing support for more than half a year now. Time to switch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* oxnas: switch to Linux 5.10Daniel Golle2021-10-0913-1356/+1
| | | | | | | Linux 5.10 has been there as testing kernel for a while now. Do the switch and drop config and patches for Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: enable configfs for DT overlay on mt7622 and mt7623Daniel Golle2021-10-092-0/+5
| | | | | | | | | Enable kernel options to allow loading device tree overlay via configfs at runtime. This is useful for devboards like the BPi-R2 and BPi-R64 which got RasbPi-compatible 40-pin GPIO header which allow all sorts of extensions. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: add legacy realtek GPIO driver for rtl9300 supportBirger Koblitz2021-10-094-0/+507
| | | | | | | The otto GPIO driver does not work with rtl9300 SoCs. Add the legacy driver again and use that by default in the 9300 .dtsi Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: enable Aquantia PHY supportBirger Koblitz2021-10-091-0/+1
| | | | | | Enables Aquantia PHY support in the kernel Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Fix bug when accessing external PHYs on SoCs older than Revision CBirger Koblitz2021-10-091-3/+22
| | | | | | | | | | RTL8393 SoCs older than Revision C hang on accesses to PHYs with PHY address larger or equal to the CPU-port (52). This will make scanning the MDIO bus hang forever. Since the RTL8390 platform does not support more than 52 PHYs, return -EIO for phy addresses >= 52. Note that the RTL8390 family of SoCs has a fixed mapping between port number and PHY-address. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: cleanup PHY driverBirger Koblitz2021-10-091-8/+6
| | | | | | Removes unnecessary output from the RTL PHY drivers. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add debugfs support for RTL9300Birger Koblitz2021-10-092-1/+130
| | | | | | Adds support for debugfs on RTL9300, in particular the drop counters. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add SoC-specific routing offload implementationBirger Koblitz2021-10-094-165/+938
| | | | | | | | Adds SoC specific routing offload implementations for RTL8380/90 and RTL9300. RTL83xx supports merely nexthop routing, RTL9300 full host and prefix routes. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: add driver support for routing offloadBirger Koblitz2021-10-092-20/+946
| | | | | | | | Add generic support for listening to FIB and Event notifier updates and use this information to hook into the L3 hardware capabilities of the RTL SoCs. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* kernel: Add AQR113C and AQR813 supportBirger Koblitz2021-10-091-0/+142
| | | | | | | This hack adds support for the Aquantia 4th generation, 10GBit PHYs AQR113C and AQR813. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Improve MDIO bus probing for RTL9300Birger Koblitz2021-10-091-21/+11
| | | | | | | Improve handling of multi-gig ports on the RTL9300 when probing the MDIO bus. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Fix bug in VLAN ingress and egress filteringBirger Koblitz2021-10-091-4/+4
| | | | | | | | | | | The ingress filter registers use 2 bits for each port to define the filtering state, whereas the egress filter uses 1 bit. So for for the ingress filter the register offset for a given port is: (port >> 4) << 4: since there are 16 entries in a register of 32 bits and for the egress filter: (port >> 5) << 4: since there are 32 entries in a register of 32 bits Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Configure initial L2 learning setupBirger Koblitz2021-10-095-1/+63
| | | | | | | | Configure a sane L2 learning configuration upon DSA driver load so that the switch can start learning L2 addresses. Also configure the correct flood masks for broadcast and unknown unicast traffice. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add phylink configuration routines for RTL93xxBirger Koblitz2021-10-093-20/+260
| | | | | | | | This adds RTL93xx-specific MAC configuration routines that allow also configuration of 10GBit links for phylink. There is support for the Realtek-specific HISGMI protocol. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Packet Inspection Engine support for RTL930x SoCsBirger Koblitz2021-10-091-0/+678
| | | | | | Adds the RTL930x-specific PIE support routines. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Packet Inspection Engine support for RTL839x SoCsBirger Koblitz2021-10-091-0/+875
| | | | | | Adds the RTL839x-specific PIE support routines. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Packet Inspection Engine support for RTL838x SoCsBirger Koblitz2021-10-091-0/+1007
| | | | | | Adds the RTL838x-specific PIE support routines. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add driver support for TC offloadingBirger Koblitz2021-10-098-3/+730
| | | | | | | | This adds support for offloading TC flower by using the Packet Inspection Engine of the RTL-SoCs. Basic infrastructure support is provide with callbacks to the tc subsystem and support for HW packet counters. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Add port to smi-bus address mappingBirger Koblitz2021-10-091-32/+69
| | | | | | | | All RTL SoCs addresss PHYs via their port number, which is mapped to an SMI address. Add support for configuring this mapping via the .dts on all SoCs apart from the 839x, where the mapping to the 64 ports is fixed. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Increase maximum RX ring buffer lengthBirger Koblitz2021-10-091-4/+5
| | | | | | | Increase the maximum ring buffer length in order to improve performance on RTL839x devices. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Improve TX CPU-Tag usageBirger Koblitz2021-10-091-20/+29
| | | | | | | | | On RTL83xx enable learning of the MAC source address of the CPU port from outgoing packets. Add documentation on bit fields. On RTL93xx enable port-mask usage and the use of internal priority, these SoCs automatically learn the MAC. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Remove storm control and attack warningsBirger Koblitz2021-10-091-25/+0
| | | | | | | | Remove the storm control and attack warnings from the IRQ handler of the Ethernet driver. There was no consequence to the detection and the kernel can also handle at least the attacks itself. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* realtek: Correct TX ring size in ethernet driverBirger Koblitz2021-10-091-2/+1
| | | | | | | This enlarges the size of the TX ring buffer, which prevents warnings when the buffer runs out of space. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
* config: pack toolchain per default on buildbotsPaul Spooren2021-10-081-0/+1
| | | | | | | The toolchain can be used for accelerated CI builds. This commit enabled the packing of it by default on buildbots. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: select procd-seccomp if kernel support is presentDaniel Golle2021-10-071-0/+5
| | | | | | | Install ld-preload hooks allowing to add seccomp filters for arbitrary services if kernel support for seccomp is present. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: select procd-ujail if !SMALL_FLASHDaniel Golle2021-10-071-0/+5
| | | | | | | Add procd-ujail to DEFAULT_PACKAGES if not building for space-constraint (FEATURES:=small_flash) targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* umdns: add missing syscalls to seccomp filterRonny Kotzschmar2021-10-071-0/+3
| | | | | | | The 'mmap', 'mmap2', 'munmap' syscalls are missing. Found with 'utrace /usr/sbin/umdns'. Signed-off-by: Ronny Kotzschmar <ro.ok@me.com>
* tools/meson: update to 0.59.2Rosen Penev2021-10-074-5/+7
| | | | | | | | | | | Update install procedure based on upstream feedback. Normally, meson is to be installed with pip. But as pip is not mandated by the build system, it cannot be used. Upstream provides a nice script to pack meson automatically. Moved src/ to files/. No need to copy to BUILD_DIR. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: export switch_generic_set_link() symbolRafał Miłecki2021-10-071-0/+1
| | | | | | | | | | | | This fixes: ERROR: "switch_generic_set_link" [drivers/net/phy/b53/b53_common.ko] undefined! At some point all packages for swconfig drivers were dropped and targets were meant to have them built into kernels. It seems b53 (re-)gained its kmod-switch-bcm53xx however and b53 needs to be built as module. Fixes: b2cfed48f626 ("Revert "swconfig: fix Broadcom b53 support"") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.10: dsa: don't set skb->offload_fwd_mark when not offloading bridgeMatthew Hagan2021-10-071-0/+138
| | | | | | | | | | | Add Vladimir Oltean's "net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge" This covers cases where packets received by an upstream switch must be forwarded back on the same port, which skb->offload_fwd_mark normally prevents. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* Revert "swconfig: fix Broadcom b53 support"Rafał Miłecki2021-10-072-33/+0
| | | | | | | | | | | | | | | | | | | | This reverts commit 8f9cd1af0f9c325a902dbd0e79e12015372e6bb0. That commit was meant to add a single EXPORT_SYMBOL_GPL() but it actually also added few .of_match_table-s. One commit should handle one thing and should not introduce unrelated changes. Regarding actual changes: 1. EXPORT_SYMBOL_GPL is not required as we don't build swconfig drivers as modules. 2. PHY drivers must not have .of_match_table. That is allowed for MDIO drivers. This could work for some time (although is didn't for me on bcm53xx) but does not with kernel 5.10. It causes a soft lockup and upstream developers confirmed it's an unsupported design. Link: https://lore.kernel.org/netdev/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com/t/#mf80e472f35ee23f7a75cbf5b1e101a17ab3a64a3 Cc: Tobias Schramm <tobleminer@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport bgmac upstream commits from 5.15 / for 5.16Rafał Miłecki2021-10-075-2/+177
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: switch to Kernel 5.10Adrian Schmutzler2021-10-052-2/+2
| | | | | | | | This has testing support for 7 months. Time to switch. TL-WDR4900 is disabled due to kernel size limitation. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: 5.10: add missing symbolsPawel Dembicki2021-10-054-5/+4
| | | | | | | | | | | | Three missing symbols were found during mpc85xx/p2020 compilation. While at it, CONFIG_FSL_ENETC_MDIO is moved to generic config for consistency. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [move CONFIG_FSL_ENETC_MDIO, remove redundant definitions, adjust commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm27xx: remove obsolete kernel 5.4Adrian Schmutzler2021-10-051051-266922/+0
| | | | | | | With the upgrade to kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* firmware-utils: bump to git HEADKevin Darbyshire-Bryant2021-10-051-3/+3
| | | | | | | | f9ad6b3 Add more missing includes for byte swap operations Basically stop it exploding on MacOS Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: drop kmod-gpio-devStijn Tintel2021-10-051-16/+0
| | | | | | | The GPIO_DEVICE symbol belonged to a custom driver that was removed from OpenWrt in 2012. The symbol never existed in the upstream kernel. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: add RPI_AXIPERF symbolStijn Tintel2021-10-058-0/+8
| | | | | | | | When KERNEL_PERF_EVENTS is enabled in OpenWrt, or PERF_EVENTS in the kernel config, the RPI_AXIPERF is exposed. Add it to the subtarget kernel configs to avoid build failures. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: add SND_SOC_AD193X_{I2C,SPI} symbolsStijn Tintel2021-10-059-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building an image for the bcm27xx target, some combinations of config options will fail to build due the SND_SOC_AD193X_I2C and SND_SOC_AD193X_SPI kernel config symbols being missing. The problem only occurs on bcm27xx as the target contains a patch that modifies the Kconfig file containing the symbols; in the vanilla kernel, there is no string after the tristate keyword so the symbol is not exposed. The _I2C symbol depends on I2C, which is enabled in the kernel configs of all bcm27xx subtargets. The _SPI symbol depends on SPI_MASTER, which is exposed by either kmod-mmc-spi, kmod-spi-bitbang, kmod-spi-dev, kmod-spi-bcm2835 or kmod-spi-bcm2835-aux. Both symbols are defined in the sound/soc/codecs directory, which is only included when SND_SOC is enabled, so this problem doesn't occur when kmod-sound-soc-core is not enabled. As the kmod-sound-soc-bcm2835-i2s package disables the SND_SOC_AD193X_SPI symbol, it also doesn't occur when kmod-sound-soc-bcm2835-i2s is enabled. As there are several possible config combinations that do exhibit this problem, it is best to solve it by adding the missing symbols to the subtarget kernel configs. By doing this we can remove them from the kmod-sound-soc-bcm2835-i2s package. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* tools/cmake: update to 3.21.3Rosen Penev2021-10-051-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/bison: update to 3.8.2Rosen Penev2021-10-051-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* busybox: update to 1.34.1Hannu Nyman2021-10-053-116/+2
| | | | | | | | | | | | Update busybox to version 1.34.1, which is a minor maintenance release. It contains just the two post-1.34.0 upstream patches that we earlier backported plus a few fixes to awk. * Remove the two backported upstream patches that are now unnecessary. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* firmware-utils: update to version 2021-10-05Petr Štetiar2021-10-05104-37775/+9
| | | | | | | | | | | | | | | | Includes following changes: db65821f006c cmake: fix missing install target 3a0cfc856991 Add initial GitLab CI support 8f47adea6f87 Add missing includes for byte swap operations fbafae9f8037 Convert to CMake based project Additionaly moves source code into separate Git project repository and converts the package build to utilize CMake. Signed-off-by: Petr Štetiar <ynezz@true.cz> [rmilecki: rebase, update to the latest repo git & rm -r src] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix USW-Flex reversed switch-port orderDavid Bauer2021-10-041-4/+4
| | | | | | | Switch port order was reversed due to reading the internal labling (which mismatches the one on the case). Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-mediatek: update to 2021.10Daniel Golle2021-10-0432-610/+77
| | | | | | | | | | | U-Boot 2021.10 has been released. Rebase mediatek patches on top of new release and remove some patches which have been merged upstream. Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and Linksys E8450 (mt7622). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add explicit "set:" for client-matching optionsPaul Fertser2021-10-031-6/+6
| | | | | | | | | Bring the usage in line with the dnsmasq man page and the other options where set: is mandatory. No functional change. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* build: fix `which` detection on Fedora & MacOSPaul Spooren2021-10-021-1/+3
| | | | | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Fixup of fca5ad55d2 prereq-build: fix `which` detection on Fedora Reported-by: Jani Partanen <rtfm@iki.fi> Suggest-by: Etienne Champetier <champetier.etienne@gmail.com> Tested-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: Deactivate some ARM64 errata workaroundsHauke Mehrtens2021-10-0317-61/+10
| | | | | | | | | | | This deactivates the following workarounds for erratas in ARM64 CPUS: CONFIG_ARM64_ERRATUM_1165522: Cortex-A76 cores (r0p0, r1p0, r2p0) CONFIG_ARM64_ERRATUM_1286807: Cortex-A76 cores (r0p0 to r3p0) CONFIG_ARM64_ERRATUM_1418040: Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) CONFIG_CAVIUM_TX2_ERRATUM_219: Cavium ThunderX2 CONFIG_FUJITSU_ERRATUM_010001: Fujitsu-A64FX Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Refresh kernel 5.10 configurationHauke Mehrtens2021-10-033-115/+18
| | | | | | | | The cortex53 subtarget was missing multiple config options and the other targets just defined some options which are not needed. Fixes: 83672f506d95 ("sunxi: add testing Linux 5.10") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 01:04:44 +0000