aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* f2fs-tools: fix resize.f2fs (#9800)Kerma Gérald2022-05-012-1/+47
| | | | | | | | | | resolve issue - https://github.com/openwrt/openwrt/issues/9800 add the upstream patch: - f2fs-tools.git/patch/?id=f056fbeff08d30a6d9acdb9e06704461ceee3500 Signed-off-by: Kerma Gérald <gandalf@gk2.net> (cherry picked from commit 1aac1b36d3cf44c8bfa8d4a6d8df6e815fc06529)
* ath79: add USB power control for GL-AR300M seriesPtilopsisLeucotis2022-05-012-0/+17
| | | | | | | | | | | Add USB power control in DTS for GL.iNet models: - AR300M; - AR300M-Ext; - AR300M16; - AR300M16-Ext. Signed-off-by: PtilopsisLeucotis <PtilopsisLeucotis@yandex.com> (cherry picked from commit 6e9c814022e41a7cfa4db3b1a41e257fd1515bea)
* mpc85xx: Fix output location of padded dtbMartin Kennedy2022-05-012-3/+3
| | | | | | | | | | | | | | | | | | | | | | In commit 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i"), we borrowed a recipe convention from apm821xx for device tree blob padding. Unfortunately, in the apm821xx target, the image recipes name the device tree blob differently, meaning that in mpc85xx, the padded dtb is never consumed. Change the definition of `Build/dtb` so that it outputs the padded dtb to the correct location for it to be consumed. Also, rename the recipe to `Build/pad-dtb`, so it is clear we are building and padding the device tree blob. This change fixes Github issue #9779 [1]. [1]: https://github.com/openwrt/openwrt/issues/9779 Fixes: 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i") Signed-off-by: Martin Kennedy <hurricos@gmail.com> (cherry picked from commit 1d06277407d3e294589ecde46328303a9f3803fd)
* build: don't remove BUILD_LOG_DIR in _cleanHuangbin Zhan2022-05-011-1/+1
| | | | | | | | targetclean should not remove BUILD_LOG Fixes: db34b93331e9 (add a version that can be bumped to force toolchain/target rebuild) Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com> (cherry picked from commit aeaa816cd2bd22de165c71a41d8d198a9235e971)
* dnsmasq: add logfacility file to jail mountsDaniel Golle2022-05-011-2/+6
| | | | | | | | | If logfacility is a path to a file it needs to be r/w mounted in the sandbox as well for dnsmasq to work. Reported-by: @iointerrupt Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 2b5fa44f60165d66d74131778df0b64b706887e2)
* ath79: ubnt: drop swconfig on ac-{lite,lr,mesh}Martin Weinelt2022-05-011-0/+3
| | | | | | | These don't have switches that could be configured using swconfig. Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de> (cherry picked from commit 089eb02abcd7512c6d182953560eb2453ef144ca)
* bcm63xx: fix description fix name caseHuangbin Zhan2022-05-011-1/+1
| | | | | | | The `Description` should be capital. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com> (cherry picked from commit b8ed98b10004d5de25c1b4b2d2b59b15fc04f794)
* ath79: ZTE MF286R: add comgt-ncm to DEVICE_PACKAGESLech Perczak2022-05-011-1/+2
| | | | | | | | | | | | When adding support to the router's built-in modem, this required package was omitted, because it was already enabled in the image configuration in use for testing, and this went unnoticed. In result, the modem still isn't fully supported in official images. As it is the primary WAN interface, add the missing package. Fixes: e02fb42c53ba ("comgt: support ZTE MF286R modem") Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 8a1003c5986514d7a78f78b3ee94003837d82582)
* ramips: zbt-wg2626: Add the reset gpio for PCIe port 1Alban Bedel2022-05-011-0/+3
| | | | | | | | | | | | | | The 2.4GHz interface doesn't come up properly with the log showing: mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) As seen on other MT7621 boards this is caused by a missing reset GPIO. The MT7621 dtsi set GPIO 19 as PCIe reset GPIO, which on this board reset the 5GHz interface on port 0. Add GPIO 8 to the PCIe reset GPIO list to also reset the 2.4GHz interface on port 1. Signed-off-by: Alban Bedel <albeu@free.fr> (cherry picked from commit f953a1a4bfba2fa70c12bb80938aa66481a673b6)
* ipq40xx: 5.10: fix ar40xx driverNick Hainke2022-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This commit is completely based on the work of adron-s: https://github.com/openwrt/openwrt/pull/4721#issuecomment-1101108651 The commit fixes the data corruption on TX packets. Packets are transmitted, but their contents are replaced with zeros. This error is caused by the lack of guard (50 ms) intervals between calibration phases. This error is treated by adding mdelay(50) to the calibration function code. In the original qca-ssda code [0], these mdelays were existing, but in the ar41xx.c they are gone. Tested on: - Fritz!Box 4040 - Fritz!Box 7530 - Mikrotik SXTsq 5AC - ZyXEL NBG6617 - [0] https://git.codelinaro.org/clo/qsdk/oss/lklm/qca-ssdk/-/blob/NHSS.QSDK.11.4/src/init/ssdk_init.c#L2072 Suggested-by: Serhii Serhieiev <adron@mstnt.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit ab7e53e5cce703c7a62efbe1d41fb94c2228a178)
* ucode: reorder BuildPackage callsJo-Philipp Wich2022-04-281-1/+1
| | | | | | | | | | Ensure that the libucode recipe is processed before the ucode one in order to reliably encode the ABI version into ucode's libucode dependency. Fixes: #9788 Ref: https://forum.openwrt.org/t/fw4-wont-start-after-upgrade/126308 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 573ce80ca612b0f642b7cbd5d9d33d89b7e96670)
* iwinfo: update to latest HEADDavid Bauer2022-04-271-3/+3
| | | | | | | dc6847e iwinfo: nl80211: omit A-hwmode on non-5GHz hardware Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f757a8a09885e3c8bb76371e037b8c0731111980)
* uboot-envtools: add WS-AP3825i configDavid Bauer2022-04-261-0/+4
| | | | | | | | Add configuration to use uboot-envtools with the Extreme Networks WS-AP3825i. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit fb7ff6b027d1c69e97e6d39e688a969c164065c8)
* mpc85xx: set WS-AP3825i mac-address in preinitDavid Bauer2022-04-261-0/+12
| | | | | | | | | | The bootloader does seem to not correctly patch in the MAC address for eth0 / eth1 in some cases. While the root cause is not known, manually applying the MAC-Address in preinit does not hurt. Reported-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c6d52515e009d96e0afbe77310bf172f113d0eef)
* mpc85xx: define reset-delay for WS-AP3825i eth PHYDavid Bauer2022-04-261-0/+4
| | | | | | | | | | | | | The WS-AP3825i uses Atheros PHYs which according to the datasheet require the reset to be asserted for at least 1 ms. This fixes broken eth1 upon soft-reboot. eth0 is no affected, as the ifup / ifdown cycle in preinit prevents this issue from happening when the system is ready. Reported-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 8b3c313515c1ae37be9d61a4e92c4bf4b43f605f)
* firewall4: update to latest Git HEADJo-Philipp Wich2022-04-251-4/+4
| | | | | | | | | | | | | | fc83d46 ruleset: set auto-merge directive for interval sets 9bce873 fw4: fix skipping invalid ipset entries 425ea8a fw4: fix applying zone flags for source bound rules a378883 fw4: fix emitting family specific redirect rules without any addrs 11feddf fw4: bracketize IPv6 addresses in dnat addr:port notation 9972f7d fw4: ensure to capitalize weekday names fde8070 treewide: forward compatibility changes Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commits 1a35ac99905adc35059489d6e19c7de42ef4cc01 and af02a12d7ccb64a3abbd9683dd22275b538f6d50)
* ucode: update to latest Git HEADJo-Philipp Wich2022-04-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e14b099 syntax: implement support for ES6 template literals 111cf06 vm: stop executing bytecode on return of nested calls 33f1e0b treewide: move json-c compat shims into internal header file e0e9431 vm: move unhandled exception reporting out of `uc_vm_execute_chunk()` 2b59140 vm: fix callframe double free on unhanded exceptions 7d7e950 main: abort when failing to load a preload library 1032a67 lib: let `json()` accept input objects implementing `read()` method 5ee68d5 fs: implement `fs.readfile()` and `fs.writefile()` df6b861 ci: debian: change path before attempting to invoke Git operations dfaf05a ci: debian: automatically update changelog from Git tag 34f3c45 ci: fix YAML syntax of Debian workflow e956bcf fs: fix off-by-one in fs.dirname() function 6fc4b6c .gitignore: fix overmatching patterns, blacklist cram .venv 7c2e082 build: remove legacy json-c check 77942af build: add polyfills for older libjson-c versions 0b4aaa3 CI: build Debian package f404285 debian: Add package definition a37f654 types: fix escape sequence encoding of high byte values in JSON strings aae5312 Update README.md 8134e25 build: fix symlink install target 87c7296 treewide: replace some leftover "utpl" occurrences, update .gitignore 7d27ad5 build: only stage ucc symlink if compile support is enabled 171402f lib: add date and time related functions 8b5dc60 lib: provide API function to obtain stdlib function implementations eb0d2f1 main: turn ucode into multicall executable 28ee7e1 uloop: add support for tasks 753dea9 CI: build on macOS 668c5c0 lib: add argument position support (`%m$`) to `sprintf()` and `printf()` ab46fdf treewide: remove legacy json-c include directives b8f49b1 tests: 21_regex_literals: generalize syntax error test case fd2e5e7 tests: 16_sort: fix logic flaw exposed on OS X 2c71bf2 tests: run_tests.sh: pass dummy value to `-T` flag 55c4a90 lib: disallow zero padding for %s formats 0d05cb5 tests: run_tests.sh: use greadlink if available 271e520 resolv: make OS X compatible d13c320 fs: avoid Linux specific sys/sysmacros.h include on OS X 33397a3 uloop: use execvp() on OS X bafdc8f lib: add naive sigtimedwait() stub for OS X ada1585 build: consolidate CMakeLists.txt and cover OS X deviations befbb69 include: add OS X compatible endian.h header 49838a8 include: rename include guards to avoid clashes with system headers 91f65de nl80211: add missing attributes and correct some attribute flags b4a1fd5 lib: adjust require(), render() and include() raw mode semantics 4618807 main: rework CLI frontend 73dcd78 lib: fix potential integer underflow on empty render output c402551 vm: fix crash on object literals with non-string computed properties efe8a02 syntax: support add new operators 078d686 ubus: add event support 6c66c83 ubus: refactor error and argument handling 1cb04f9 ubus: add object publishing, notify and subscribe support 0e85974 uloop: clear errno before integer conversion attempts 05bd7ed types: treat resource type prototypes as GC roots a2a26ca lib: introduce uloop binding 6b6d01f vm: release this context on exception in managed method call 1af23a9 tests: fix proto() testcase 4ce69a8 fs: implement access(), mkstemp(), file.flush() and proc.flush() Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commits cef3e6a69c4751189e946cf2ff0e00304f9fff6e, 0400774a1001835b912ecf2097bba1306deba9f8 and c59704334c4a01bc18ab489f86d4ca7d2ea3cb8f)
* iwinfo: update to latest HEADDavid Bauer2022-04-241-3/+3
| | | | | | | a479b9b devices: remove whitespace 562d015 iwinfo: nl80211: fix hwmode parsing for multi-band NICs Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-mediatek: remove '0x' prefix from pstore nodeDaniel Golle2022-04-231-1/+1
| | | | | | | | | Remove '0x' prefix from pstore node in dts, just like it was done for the device tree used by Linux on MT7622. This change is done in preparation to update U-Boot to 2022.04. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 810b48e79389a54b9b332fa2834360602a9734f3)
* mediatek: mt7622: remove '0x' prefix from pstore address in dtsDaniel Golle2022-04-231-1/+1
| | | | | | | | | | | | | | | Adresses of device tree nodes are typically noted without the '0x' prefix. While having the '0x' prefix doesn't hurt when using Linux, more recent versions of U-Boot will add a duplicate ramoops node as a simple string compare is used to check if the node is already present. Remove the '0x' prefix to avoid the kernel warning resulting from U-Boot adding a dupplicate pstore/ramoops node. See also https://lists.denx.de/pipermail/u-boot/2022-April/481810.html Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit fc245338d6e02e61fa7ecbd1a828aed97cdbef88)
* OpenWrt v22.03.0-rc1: revert to branch defaultsHauke Mehrtens2022-04-215-11/+9
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v22.03.0-rc1: adjust config defaultsv22.03.0-rc1Hauke Mehrtens2022-04-215-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: fix compilation with /dev/cryptoEneas U de Queiroz2022-04-201-0/+19
| | | | | | This is trivial fix of a duplicate definition of 'int ret'. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: add missing config symbolsFelix Fietkau2022-04-201-0/+2
| | | | | | | | | MPLS feature symbols are normally only set when kmod-mpls is enabled, but the CONFIG_MPLS symbol they depend on could also have been selected by openvswitch instead Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 92add80414c2f39ba8fd0d221d0f37e75fb19951)
* netfilter: move nf-log modules into separate packagesJo-Philipp Wich2022-04-192-6/+32
| | | | | | | | | Both legacy iptables and nftables require nf-log modules for rule logging, so move them into a separate package both firewall implementations can depend on. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit bea01fa57f5c9c333138bbbc5c9f83b9d7553fb5)
* toolchain: Update glibc 2.34 to recent HEADHauke Mehrtens2022-04-192-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the following changes: 31186e2cb7 elf: Sort tests and modules-names 511b244cc5 elf: Add a comment after trailing backslashes de6cdd6875 elf/Makefile: Reflow and sort most variable assignments 948ebc098e Fix glibc 2.34 ABI omission (missing GLIBC_2.34 in dynamic loader) b952c25dc7 x86: Black list more Intel CPUs for TSX [BZ #27398] aa601d0244 x86: Use CHECK_FEATURE_PRESENT to check HLE [BZ #27398] e09e7b1492 support: Add support_socket_so_timestamp_time64 e098446037 linux: Fix ancillary 64-bit time timestamp conversion (BZ #28349, BZ#28350) 489d0b8b32 Linux: Only generate 64 bit timestamps for 64 bit time_t recvmsg/recvmmsg 008003dc6e tst-socket-timestamp-compat.c: Check __TIMESIZE [BZ #28837] 05c83ccaf5 linux: __get_nprocs_sched: do not feed CPU_COUNT_S with garbage [BZ #28850] ad615b59c7 Linux: Simplify __opensock and fix race condition [BZ #28353] d8302ba2da hurd if_index: Explicitly use AF_INET for if index discovery 6eaf10cbb7 socket: Do not use AF_NETLINK in __opensock 0351c75c5f linux: Fix missing __convert_scm_timestamps (BZ #28860) d64b08d5ba Add reference to BZ#28860 on NEWS 007e054d78 linux: fix accuracy of get_nprocs and get_nprocs_conf [BZ #28865] 04d60ce0f2 string: Add a testcase for wcsncmp with SIZE_MAX [BZ #28755] 38e0d24794 x86: Fallback {str|wcs}cmp RTM in the ncmp overflow case [BZ #28896] d093b677c3 x86: Test wcscmp RTM in the wcsncmp overflow case [BZ #28896] 15b00d2af0 x86: Fix TEST_NAME to make it a string in tst-strncmp-rtm.c d5d1c95aaf NEWS: Add a bug fix entry for BZ #28896 852361b5a3 localedef: Handle symbolic links when generating locale-archive 3be79b72d5 Fix elf/tst-audit2 on hppa c6f9085ee4 hppa: Fix swapcontext f610d2935f hppa: Revise gettext trampoline design 40fc6a74ee nptl: Fix cleanups for stack grows up [BZ# 28899] 6c9c230765 hppa: Fix warnings from _dl_lookup_address b5032c3d37 io: Add fsync call in tst-stat b53f0c11de nss: Do not mention NSS test modules in <gnu/lib-names.h> 54b1273395 nss: Protect against errno changes in function lookup (bug 28953) c82bdf033f Don't add access size hints to fortifiable functions 0e6ebf06e4 Make sure that the fortified function conditionals are constant 536910724d debug: Add tests for _FORTIFY_SOURCE=3 98ea9372cc __glibc_unsafe_len: Fix comment 10f7bdebe5 fortify: Fix spurious warning with realpath d6a58bd81d Enable _FORTIFY_SOURCE=3 for gcc 12 and above f8c2f620f1 debug: Autogenerate _FORTIFY_SOURCE tests 224d8c1890 debug: Synchronize feature guards in fortified functions [BZ #28746] 738ee53f0c hppa: Implement swapcontext in assembler (bug 28960) d53b9cc391 hppa: Use END instead of PSEUDO_END in swapcontext.S 4b5b8a1cdf powerpc: Delete unneeded ELF_MACHINE_BEFORE_RTLD_RELOC b19de59d62 elf: Avoid nested functions in the loader [BZ #27220] c6df39a0bd elf: Fix elf_get_dynamic_info definition b868b45f67 elf: Fix dynamic-link.h usage on rtld.c f6a54a3042 elf: Fix elf_get_dynamic_info() for bootstrap a31bbe3242 elf: Move LAV_CURRENT to link_lavcurrent.h e25fe99213 elf: Move la_activity (LA_ACT_ADD) after _dl_add_to_namespace_list() (BZ #28062) ce0cb6d1d2 elf: Add _dl_audit_objopen 66e9d27a09 elf: Add _dl_audit_activity_map and _dl_audit_activity_nsid ec0fc2a153 elf: Add _dl_audit_objsearch 198660741b elf: Add _dl_audit_objclose b2d99731b6 elf: Add _dl_audit_symbind_alt and _dl_audit_symbind 31473c273b elf: Add _dl_audit_preinit fd9c4e8a1b elf: Add _dl_audit_pltenter a8e211daea elf: Add _dl_audit_pltexit 29496b3103 elf: Avoid unnecessary slowdown from profiling with audit (BZ#15533) 02c6a3d353 elf: Add audit tests for modules with TLSDESC d1b9bee29a elf: Issue audit la_objopen for vDSO 2255621f0e elf: Do not fail for failed dlmopen on audit modules (BZ #28061) 98047ba95c elf: Add la_activity during application exit efb21b5fb2 elf: Fix initial-exec TLS access on audit modules (BZ #28096) 056fc1c0e3 elf: Issue la_symbind for bind-now (BZ #23734) b118bce87a elf: Fix runtime linker auditing on aarch64 (BZ #26643) 165e7ad459 Fix elf/tst-audit25a with default bind now toolchains aabdad371f elf: Replace tst-audit24bmod2.so with tst-audit24bmod2 4dca2d3a7b hppa: Fix bind-now audit (BZ #28857) ceed89d089 NEWS: Update fixed bug list for LD_AUDIT backports. 0c03cb54c8 S390: Add new s390 platform z16. 290db09546 nptl: Handle spurious EINTR when thread cancellation is disabled (BZ#29029) 5d8c777634 hurd: Fix arbitrary error code b87b697f15 mips: Fix mips64n32 64 bit time_t stat support (BZ#29069) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 0b5a3234369395e886c2902d4b6a490c4ea91634)
* ramips: add support for OrayBox X3ARay Wang2022-04-195-0/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OrayBox X3A is a 2.4/5GHz dual band AC router, based on MediaTek MT7621. Specification: * SoC: MT7621 * RAM: DDR3 128 MiB * Flash: 16 MiB NOR (XM25Q128) * Wi-Fi: (single chip hosting both 2.4G and 5G) * 2.4GHz: MT7615 * 5GHz: MT7615 * Ethernet: 3x 1000Mbps * Switch: MT7530 * LED: * Ethernet LEDs: On the back of the router, hardware-controlled. * Status LEDs: One "pixel-like" RGB LED in the front of the router, which is actually made up of 3 individual LEDs (with dedicated GPIO pins) with the color of Red, Green, and Blue. The OEM firmware only lights up one color at a time to indicate status, but that's very boring, and the colors actually look great when combined, so I've improvised a little and made them indicate netdev activities. My test results: GPIO 13/14/15 000 white (actually more like bright green or cyan because the brightness of the green LED is higher than red and blue) 001 bright purple 010 bright green 011 red 100 bright cyan 101 blue 110 green 111 off Flash Layout: 0x0000000-0x0030000 : "u-boot" 0x0030000-0x0040000 : "u-boot-env" 0x0040000-0x0050000 : "factory" 0x0050000-0x0f50000 : "firmware" /*0x0f50000 to 0x0fe0000 is undefined, same as OEM firmware*/ 0x0fe0000-0x0ff0000 : "bdinfo" 0x0ff0000-0x1000000 : "reserve" MAC address: MAC Source Description Fix A0:CX:XX:BX:XX:0D BDINFO_9 LAN(LABEL) DTS A0:CX:XX:BX:XX:0E BDINFO_9 + 1 WAN DTS A2:CX:XX:BX:XX:0F FACTORY_4 WIFI2G DTS A2:CX:XX:CX:XX:0F SETBIT 7 (FACTORY_4 + 0x100000) WIFI5G HOTPLUG A6:CX:XX:BX:XX:0F N/A WIFI2G_CLIENT N/A A6:DX:XX:BX:XX:0F N/A WIFI5G_CLIENT N/A Stock dmesg: https://pastebin.com/2t2jwLdf Stock Dumps: https://pastebin.com/LDLxSWX3 Installation via SSH (does not void your warranty): 1. -----UNLOCK SSH----- 1.1 Set computer IP to DHCP mode, load 'http://10.168.1.1/cgi-bin/luci' in your browser. Password is 'admin'. 1.2 Click the "备份且导出" (backup and export) button, and download the config file. 1.3 Open the downloaded file with 7zip, navigate to '/etc/config/'. 1.4 Edit the file './system'. Change the '0' into '1' under "config sys 'ssh'". 1.5 Save the file. 1.6 Upload the file by clicking the "导入且恢复" (import and recover) button. The router will automatically reboot. 2. -----FLASH THE OPENWRT FIRMWARE----- 2.1 Use any scp tool to upload the 'sysupgrade' firmware to the '/tmp/' folder to your router. It should be root@10.168.1.1 and the password is 'admin'. 2.2 SSH into the router, also root@10.168.1.1 and the password is 'admin'. 2.3 **IMPORTANT** Type command 'dd if=/dev/mtd3 of=/tmp/firmware.bin', to backup the stock firmware. Since the OEM does not provide firmware download on their website, this is the only way to get it. 2.3 **ALSO IMPORTANT** Use any scp tool to download your backed-up stock firmware from '/tmp/' to your local drive. Then you'd better use a hex reading tool to have a rough look at it to make sure nothing is corrupt. Or u can just back up again and cross check the MD5. 2.4 Type command 'mtd write /tmp/XXX.bin firmware', and it should flash the firmware. 2.5 Verify that nothing went wrong. If you're confident, type 'reboot' and reboot the router. Revert to stock firmware: 1. load stock firmware using mtd (make sure u have a backup). Signed-off-by: Ray Wang <raywang777@foxmail.com> (cherry picked from commit 9a750aae62de74b488d7df7bdbfa78cd606a8aaf)
* realtek: add ZyXEL GS1900-24HP v1 supportMartin Kennedy2022-04-194-0/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-24HP v1 is a 24 port PoE switch with two SFP ports, similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-24HP v1 * SoC: Realtek RTL8382M 500 MHz MIPS 4KEc * Flash: 16 MiB * RAM: Winbond W9751G8KB-25 64 MiB DDR2 SDRAM * Ethernet: 24x 10/100/1000 Mbps, 2x SFP 100/1000 Mbps * LEDs: * 1 PWR LED (green, not configurable) * 1 SYS LED (green, configurable) * 24 ethernet port link/activity LEDs (green, SoC controlled) * 24 ethernet port PoE status LEDs * 2 SFP status/activity LEDs (green, SoC controlled) * Buttons: * 1 "RESET" button on front panel (soft reset) * 1 button ('SW1') behind right hex grate (hardwired power-off) * PoE: * Management MCU: ST Micro ST32F100 Microcontroller * 6 BCM59111 PSE chips * 170W power budget * Power: 120-240V AC C13 * UART: Internal populated 10-pin header ('J5') providing RS232; connected to SoC UART through a TI or SIPEX 3232C for voltage level shifting. * 'J5' RS232 Pinout (dot as pin 1): 2) SoC RXD 3) GND 10) SoC TXD Serial connection parameters: 115200 8N1. Installation ------------ OEM upgrade method: * Log in to OEM management web interface * Navigate to Maintenance > Firmware > Management * If "Active Image" has the first option selected, OpenWrt will need to be flashed to the "Active" partition. If the second option is selected, OpenWrt will need to be flashed to the "Backup" partition. * Navigate to Maintenance > Firmware > Upload * Upload the openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-initramfs-kernel.bin file by your preferred method to the previously determined partition. When prompted, select to boot from the newly flashed image, and reboot the switch. * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-squashfs-sysupgrade.bin U-Boot TFTP method: * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-24HP v1 is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only be installed in the first partition anyway (hardcoded in the DTS). To ensure we are set to boot from the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x81f00000 192.168.1.10:openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-rtl838x-zyxel_gs1900-24hp-v1-squashfs-sysupgrade.bin Signed-off-by: Martin Kennedy <hurricos@gmail.com> [Add info on PoE hardware to commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit a5ac8ad0ba9df50bdd0dda1dc26cf36f83006893)
* ath79: add support for Sophos AP100/AP55 familyAndrew Powers-Holmes2022-04-199-0/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sophos AP100, AP100C, AP55, and AP55C are dual-band 802.11ac access points based on the Qualcomm QCA9558 SoC. They share PCB designs with several devices that already have partial or full support, most notably the Devolo DVL1750i/e. The AP100 and AP100C are hardware-identical to the AP55 and AP55C, however the 55 models' ART does not contain calibration data for their third chain despite it being present on the PCB. Specifications common to all models: - Qualcomm QCA9558 SoC @ 720 MHz (MIPS 74Kc Big-endian processor) - 128 MB RAM - 16 MB SPI flash - 1x 10/100/1000 Mbps Ethernet port, 802.3af PoE-in - Green and Red status LEDs sharing a single external light-pipe - Reset button on PCB[1] - Piezo beeper on PCB[2] - Serial UART header on PCB - Alternate power supply via 5.5x2.1mm DC jack @ 12 VDC Unique to AP100 and AP100C: - 3T3R 2.4GHz 802.11b/g/n via SoC WMAC - 3T3R 5.8GHz 802.11a/n/ac via QCA9880 (PCI Express) AP55 and AP55C: - 2T2R 2.4GHz 802.11b/g/n via SoC WMAC - 2T2R 5.8GHz 802.11a/n/ac via QCA9880 (PCI Express) AP100 and AP55: - External RJ45 serial console port[3] - USB 2.0 Type A port, power controlled via GPIO 11 Flashing instructions: This firmware can be flashed either via a compatible Sophos SG or XG firewall appliance, which does not require disassembling the device, or via the U-Boot console available on the internal UART header. To flash via XG appliance: - Register on Sophos' website for a no-cost Home Use XG firewall license - Download and install the XG software on a compatible PC or virtual machine, complete initial appliance setup, and enable SSH console access - Connect the target AP device to the XG appliance's LAN interface - Approve the AP from the XG Web UI and wait until it shows as Active (this can take 3-5 minutes) - Connect to the XG appliance over SSH and access the Advanced Console (Menu option 5, then menu option 3) - Run `sudo awetool` and select the menu option to connect to an AP via SSH. When prompted to enable SSH on the target AP, select Yes. - Wait 2-3 minutes, then select the AP from the awetool menu again. This will connect you to a root shell on the target AP. - Copy the firmware to /tmp/openwrt.bin on the target AP via SCP/TFTP/etc - Run `mtd -r write /tmp/openwrt.bin astaro_image` - When complete, the access point will reboot to OpenWRT. To flash via U-Boot serial console: - Configure a TFTP server on your PC, and set IP address 192.168.99.8 with netmask 255.255.255.0 - Copy the firmware .bin to the TFTP server and rename to 'uImage_AP100C' - Open the target AP's enclosure and locate the 4-pin 3.3V UART header [4] - Connect the AP ethernet to your PC's ethernet port - Connect a terminal to the UART at 115200 8/N/1 as usual - Power on the AP and press a key to cancel autoboot when prompted - Run the following commands at the U-Boot console: - `tftpboot` - `cp.b $fileaddr 0x9f070000 $filesize` - `boot` - The access point will boot to OpenWRT. MAC addresses as verified by OEM firmware: use address source LAN label config 0x201a (label) 2g label + 1 art 0x1002 (also found at config 0x2004) 5g label + 9 art 0x5006 Increments confirmed across three AP55C, two AP55, and one AP100C. These changes have been tested to function on both current master and 21.02.0 without any obvious issues. [1] Button is present but does not alter state of any GPIO on SoC [2] Buzzer and driver circuitry is present on PCB but is not connected to any GPIO. Shorting an unpopulated resistor next to the driver circuitry should connect the buzzer to GPIO 4, but this is unconfirmed. [3] This external RJ45 serial port is disabled in the OEM firmware, but works in OpenWRT without additional configuration, at least on my three test units. [4] On AP100/AP55 models the UART header is accessible after removing the device's top cover. On AP100C/AP55C models, the PCB must be removed for access; three screws secure it to the case. Pin 1 is marked on the silkscreen. Pins from 1-4 are 3.3V, GND, TX, RX Signed-off-by: Andrew Powers-Holmes <andrew@omnom.net> (cherry picked from commit 6f1efb28983758116a8ecaf9c93e1d875bb70af7)
* ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)Ryan Mounce2022-04-196-0/+254
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac) Specifications: - SoC: QCA9558 - RAM: 128 MB - Flash: 16 MB SPI - 2.4GHz WLAN: 3x3:3 802.11n on SoC - 5GHz WLAN: 3x3:3 802.11ac on QCA9880 connected via PCIe - Switch: 5x 1000/100/10 on QCA8337 connected via RGMII - SFP cage: connected via SGMII (tested with genuine & generic GLC-T) - USB: 1x type A, GPIO power switch - PoE: Passive input on Ether1, GPIO switched passthrough to Ether5 - Reset button - "SFP" LED connected to SoC - Ethernet LEDs connected to QCA8337 switch - Green WLAN LED connected to QCA9880 Not working: - Red WLAN LED Installation: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit c2140e32ce32b9cc60f7d408e20bdf45dce6a634)
* ramips: add support for ASUS RT-AC1200-V2Tamas Balogh2022-04-195-131/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specifications: SoC: MT7628DAN MIPS_24KEc@580MHz 2.4G-n 2x2 WiFi: MT7613BEN 5G-ac 160MHz 2x2 Switch: 4x100M built-in SoC Flash: 16MB W25Q128JVSQ SPI-NOR DRAM: 64MB built-in SoC MAC addresses as verified by OEM firmware: use address source Lan/Wan/2G *:60 factory 0x4 (label) 5G *:64 factory 0x8000 Serial console: 57600,8n1 Installation: Asus windows recovery tool: install the Asus firmware restoration utility unplug the router, hold the reset button while powering it on release when the power LED flashes slowly specify a static IP on your computer: IP address: 192.168.1.75 Subnet mask 255.255.255.0 start the Asus firmware restoration utility, specify the factory image and press upload do NOT power off the device after OpenWrt has booted until the LED flashing after flashing OpenWrt, there will be first no 5GHz Wifi available probably, wait until blinking finishes and do a reboot TFTP Recovery method: set computer to a static ip, 192.168.1.75 connect computer to the LAN 1 port of the router hold the reset button while powering on the router for a few seconds send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put factory.bin tftp> quit do NOT power off the device after OpenWrt has booted until the LED flashing after flashing OpenWrt, there will be first no 5GHz Wifi available probably, wait until blinking finishes and do a reboot Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com> (cherry picked from commit a4bf562aa71ad1e3dcffa392b79110d803a93f11)
* ramips: add support for BOLT! ArionAbdul Aziz Amar2022-04-194-0/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device is from now-defunct BOLT! ISP in Indonesia. The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision. Specifications: - SoC: MediaTek MT7621 - Flash: 32 MiB NOR SPI - RAM: 128 MiB DDR3 - Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN) - WIFI0: MT7603E 2.4GHz 802.11b/g/n - WIFI1: MT7612E 5GHz 802.11ac - Antennas: 2x internal, non-detachable - LEDs: Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1) Non-programmable "Power" LED - Buttons: Reset and WPS Instalation: Install from TFTP Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123 Press "1" when turning on the router, and type the initramfs file name You also need to solder pin header or cable to J4 or neighboring test points (T19-T21) Pinouts from top to bottom: GND, TX, RX, VCC (3.3v) Baudrate: 57600n8 There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB. Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com> (cherry picked from commit 78c3534645958c123aa82cec9926a34eed5dd5dd)
* ramips: add support for Wavlink WL-WN531A3Davide Fioravanti2022-04-193-1/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wavlink WL-WN531A3 is an AC1200 router with 5 fast ethernet ports and one USB 2.0 port. It's also known as Wavlink QUANTUM D4. Hardware -------- SoC: Mediatek MT7628AN RAM: 64MB FLASH: 8MB NOR (GigaDevice GD25Q64CSIG3) ETH: - 5x 10/100 Mbps Ethernet (4x LAN + 1x WAN) WIFI: - 2.4GHz: 1x (integrated in SOC) (2x2:2) - 5GHz: 1x MT7612E (2x2:2) - 4 external antennas BTN: - 1x Reset button - 1x WPS button - 1x Turbo button - 1x Touchlink button - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 7x Blue leds (wifi led + 5 ethernet ports + power) USB: - 1x USB 2.0 port UART: - 57600-8-N-1 J1 O VCC +3,3V (near lan ports) o RX o TX o GND Everything works correctly. Currently there is no firmware update available. Because of this, in order to restore the OEM firmware, you must firstly dump the OEM firmware from your router before you flash the OpenWrt image. Backup the OEM Firmware ----------------------- The following steps are to be intended for users having little to none experience in linux. Obviously there are many ways to backup the OEM firmware, but probably this is the easiest way for this router. Procedure tested on M31A3.V4300.200420 firmware version. 1) Go to http://192.168.10.1/webcmd.shtml 2) Type the following line in the "Command" input box and then press enter: mkdir /etc_ro/lighttpd/www/dev; cp /dev/mtd0ro /etc_ro/lighttpd/www/dev/mtd0ro; ls -la /etc_ro/lighttpd/www/dev/mtd0ro 3) After few seconds in the textarea should appear this output: -rw-r--r-- 1 0 0 8388608 /etc_ro/lighttpd/www/dev/mtd0ro If your output doesn't match mine, stop reading and ask for help in the forum. 4) Open in another tab http://192.168.10.1/dev/mtd0ro to download the content of the whole NOR. If the file size is 0 byte, stop reading and ask for help in the forum. 5) Come back to the http://192.168.10.1/webcmd.shtml webpage and type: rm /etc_ro/lighttpd/www/dev/mtd0ro; for i in 1 2 3 4 ; do cp /dev/mtd${i}ro /etc_ro/lighttpd/www/dev/mtd${i}ro; done; ls -la /etc_ro/lighttpd/www/dev/ 6) After few seconds, in the textarea should appear this output: -rw-r--r-- 1 0 0 196608 mtd1ro -rw-r--r-- 1 0 0 65536 mtd2ro -rw-r--r-- 1 0 0 65536 mtd3ro -rw-r--r-- 1 0 0 8060928 mtd4ro drwxr-xr-x 7 0 0 0 .. drwxr-xr-x 2 0 0 0 . If your output doesn't match mine, stop reading and ask for help in the forum. 7) Open the following links to download the partitions of the OEM FW: http://192.168.10.1/dev/mtd1ro http://192.168.10.1/dev/mtd2ro http://192.168.10.1/dev/mtd3ro http://192.168.10.1/dev/mtd4ro If one (or more) of these files are 0 byte, stop reading and ask for help in the forum. 8) Store these downloaded files in a safe place. 9) Reboot your router to remove any temporary file in ram. Installation ------------ Flash the initramfs image in the OEM firmware interface (http://192.168.10.1/update.shtml). When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. Restore OEM Firmware -------------------- Flash the "mtd4ro" file you previously backed-up directly from LUCI. Warning: Remember to not keep settings! Warning2: Remember to force the flash. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:9B (factory @ 0x28) WAN XX:XX:XX:XX:XX:9C (factory @ 0x2e) WIFI 2G XX:XX:XX:XX:XX:9D (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:9E (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:9D 2) There is just one wifi led for both wifi interfaces. It currently shows only the 2.4 GHz wifi activity. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> (cherry picked from commit bb505d82add5636da891bb97fdabc57947280e88)
* Revert "kernel: backport MT7530 VLAN fix"Stijn Tintel2022-04-195-523/+0
| | | | | | | | | | | There are various reports on Github and in the forum that this commit causes multiple problems. This reverts commit ee6ba216d8ba1b02154c287e64d709a8bc7b0054. Fixes: #9420 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 3e0daca6447c3d5b9eb6d24ecb8e52f256f385cc)
* ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)David Musil2022-04-185-1/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD wAP-2nd (sold as wAP) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. Specifications: - SoC: Qualcomm Atheros QCA9533 - Flash: 16 MB (SPI) - RAM: 64 MB - Ethernet: 1x 10/100 Mbps (PoE in) - WiFi: AR9531 2T2R 2.4 GHz (SoC) - 3x green LEDs (1x lan, 1x wlan, 1x user) See https://mikrotik.com/product/RBwAP2nD for more info. Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: David Musil <0x444d@protonmail.com> (cherry picked from commit e20de224427008e0f26161f924bc347d974fd15a)
* mac80211: fix QCA9561 PA biasThibaut VARÈNE2022-04-181-0/+47
| | | | | | | | | | | | | | | This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs), following a suggestion from nbd[1]. This patch has been submitted upstream[2]. [1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name [2] https://lore.kernel.org/linux-wireless/20220417145145.1847-1-hacks+kernel@slashdirt.org/ Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 7dc52a78ae2c2f748a0c0c4adcb13979260b3498)
* mpc85xx: move Extreme WS-AP3825i GPIO extenderDavid Bauer2022-04-181-23/+25
| | | | | | | | Move the GPIO extender to the SoC node. Otherwise, the legacy PowerPC init code will not populate the BUS and thus never probe spi-gpio. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0c09d0305835abc7bcc32285dc82c008159936d)
* kernel: Remove patch for kernel 5.15Hauke Mehrtens2022-04-171-48/+0
| | | | | | | | This patch was accidentally backported from master for kernel 5.15 too. Remove the version for kernel 5.15 and keep the version for kernel 5.10. Fixes: 9ab337dfbce7 ("kernel: backport pgalloc memory leak fix") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* readline: add host PICRosen Penev2022-04-171-0/+1
| | | | | | | | Python seems to fail to link to libreadline properly because of this. Not a fatal error but an error nontheless. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit b363f7488643882b9c53a1e2c6db2a110703cc1d)
* kernel: bump 5.10 to 5.10.111John Audia2022-04-1724-179/+42
| | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch apm821xx/patches-5.10/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit 0085dd6cb5e3c57dd22994c22ce893575711b6f7)
* linux-firmware: Update to version 20220411Hauke Mehrtens2022-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following files used in OpenWrt changed: amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam17h.bin amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam19h.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_smc.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_sos.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_ta.bin amdgpu-firmware/lib/firmware/amdgpu/aldebaran_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/arcturus_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ce.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_me.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_smc.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_sos.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_ta.bin amdgpu-firmware/lib/firmware/amdgpu/beige_goby_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_ce.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_me.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/cyan_skillfish2_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/dcn_3_1_6_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ce.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_me.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_smc.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_sos.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_ta.bin amdgpu-firmware/lib/firmware/amdgpu/dimgrey_cavefish_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_ce.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_me.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/gc_10_3_7_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_asd.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ce.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_me.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_ta.bin amdgpu-firmware/lib/firmware/amdgpu/green_sardine_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_ce.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_me.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_mec.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi10_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sdma1.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi12_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_asd.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_smc.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navi14_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ce.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_me.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_smc.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_sos.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_ta.bin amdgpu-firmware/lib/firmware/amdgpu/navy_flounder_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_asd.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_ce.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_me.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_mec.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_ta.bin amdgpu-firmware/lib/firmware/amdgpu/picasso_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_asd.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_ta.bin amdgpu-firmware/lib/firmware/amdgpu/psp_13_0_8_toc.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_asd.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_ce.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_me.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_mec.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_ta.bin amdgpu-firmware/lib/firmware/amdgpu/raven2_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/raven_asd.bin amdgpu-firmware/lib/firmware/amdgpu/raven_ce.bin amdgpu-firmware/lib/firmware/amdgpu/raven_me.bin amdgpu-firmware/lib/firmware/amdgpu/raven_mec.bin amdgpu-firmware/lib/firmware/amdgpu/raven_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/raven_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/raven_ta.bin amdgpu-firmware/lib/firmware/amdgpu/raven_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_asd.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_ce.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_me.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_mec.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_ta.bin amdgpu-firmware/lib/firmware/amdgpu/renoir_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/sdma_5_2_7.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ce.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_dmcub.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_me.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sdma.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_smc.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_sos.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_ta.bin amdgpu-firmware/lib/firmware/amdgpu/sienna_cichlid_vcn.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_me.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vangogh_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega10_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega12_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_asd.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_ce.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_me.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_mec.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/vega20_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_asd.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ce.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_me.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_mec2.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_pfp.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_rlc.bin amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_ta.bin ibt-firmware/lib/firmware/intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 54d9051c5596814293edd9e6a534c8d1e56e6fcf)
* lantiq: fritz736x: Move GPIO resets to the inidvidual board.dts filesMartin Blumenstingl2022-04-174-32/+77
| | | | | | | | | | | FRITZ!Box 7360 V2 and FRITZ!Box 7360 SL both use GPIOs 37 (for &phy0) and GPIO 44 (for &phy1) to control the PHY's reset lines. FRITZ!Box 7362 SL however uses GPIO 45 (for &phy0) and GPIO 44 (for &phy1). Move the GPIO reset definitions to each individual board .dts and while at it, fix the GPIOs for the FRITZ!Box 7362 SL. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit 56cd49bdc8ff762c52327ee7faa14cb99895e0fd)
* comgt: support ZTE MF286R modemCezary Jackiewicz2022-04-172-1/+23
| | | | | | | | | | | | | The modem is based on Marvell PXA1826 and uses ACM+RNDIS interface to establish connection with custom commands specific to ZTE modems. Two variants of modems were discovered, some identifying themselves as "ZTE", and others as plain "Marvell", the chipset manufacturer. The modem itself runs a fork of OpenWrt inside, which root shell can be accessed via ADB interface. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit e02fb42c53bad5dd36726c6ef5a46bfe31d2e400)
* comgt: ncm: try to detect interface for ttyACM portsLech Perczak2022-04-171-0/+4
| | | | | | | | | | | | Some modems expose ttyACM as their control ports, which have the "device" symlink pointing one level down in sysfs tree. Try to find network interfaces for them as well, this is commonly used for modems exposing ACM + RNDIS or ACM + ECM interface combinations. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit ed7957810c0aee04943559be9b0ed23431ee0654)
* comgt: ncm: select first available network interface for deviceLech Perczak2022-04-171-3/+4
| | | | | | | | | | | | | | Some modems expose multiple network interfaces on the same USB device, causing the connection setup script to fail, because glob matching in the detection phase causes 'ls' to output more than one interface name plus their base directories in sysfs. Avoid that by listing the directories explicitly and then selecting first available interface. This is the case for some variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM network interfaces, causing the connection setup to fail. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit b2940bb8b2878ce193f2edaee3e7d4c44f4a2065)
* comgt: ncm: allow specification of interface nameLech Perczak2022-04-171-14/+18
| | | | | | | | | | | | | Add ifname property to UCI, which can be used to override the autodetected interface name in case the detection fails due to having none or more than one interface exposed by the modem, which is not explicitly linked to TTY port. This is needed on certain variants of ZTE MF286R built-in modem, which exposes both RNDIS and CDC-ECM interfaces on the modem, on which the automatic detection may select the wrong network interface. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit a67629bbe25ef3d0e159db1e0c6ca81affd06898)
* kernel: backport ZTE RNDIS bogus MAC address fixLech Perczak2022-04-173-0/+239
| | | | | | | | | | | | This is required to support built-in modem of ZTE MF286R, in addition to other external modems, such as MF831, MF910, MF920, which refuse to reconfigure their remote MAC address, even if "locally administered" bit is set, leading to dropped traffic towards the host. Add a workaround for that issue already present in cdc_ether to rndis_host driver as well. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit c99013e242682a71051619806f9cc4f4e51a58fa)
* ipq806x: fix wrong CPU OPP for ipq8062Ansuel Smith2022-04-171-16/+16
| | | | | | | | | | Fix wrong CPU OPP for ipq8062. Revision of the SoC added an extra 25mV for every pvs. Also fix the voltage min/max value that were wrong. Reviewed-by: Robert Marko robimarko@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> (cherry picked from commit 3f0d87fd69b13f7d1fa06bdcc951a2896a0a9360)
* ipq806x: fix USB bug in 5.10 dtsi additionsRodrigo Balerdi2022-04-171-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing device tree has incorrect definitions for usb3_0 and usb3_1 and the blocks they depend upon: their addresses and interrupts are swapped. However, their clocks and resets are not. The result is that the USB blocks are non-functional if only one of them is enabled. This fix backports the definitions from mainline Linux 5.15 to OpenWrt's 5.10 dtsi additions. See the relevant mainline code here: https://github.com/torvalds/linux/blob/v5.17/arch/arm/boot/dts/qcom-ipq8064.dtsi#L1062-L1148 This fix does not break existing ports. But some ports may have enabled both USB blocks even thought their board only implements one, because enabling a single USB block would not have worked before this fix. This means that revisiting all ports of ipq806x devices that implement a single USB port is advised. This work must be done by maintainers that can determine which USB block corresponds to the implemented port on their hardware. Note that this fix swaps the names of the hardware ports. This is unfortunate, but will happen anyway when switching to kernel 5.15. Thus, it is best to do this ASAP, before users get to depend on port names. It is strongly recommended that this fix is backported to 22.03 before its release. This will minimize the number of users affected by the port name swap. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> (cherry picked from commit 284f2c2ae0e569660effa61c9f8d0f6459a2ae19)
* ipq806x: remove non-working fixes for USB bug in 5.10 dtsi additionsRodrigo Balerdi2022-04-172-4/+0
| | | | | | | These workarrounds are incomplete and non-functional, and thus not needed. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> (cherry picked from commit 3a4d972d43987e1ab0f697817c0f68d1a4a706dc)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 10:30:33 +0000