aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* imx6: add i2c retries for Ventana /dev/i2c-0Luka Perkov2015-12-281-0/+24
| | | | | | | | | | | | | | On Ventana boards the Gateworks System Controller is the only device on I2C1 (/dev/i2c-0) and it can NAK transfers if it is busy in an ADC loop. Because this is a multi-function device with several slave addresses it is best to add retries at the controller level instead of within each slave driver. This adds a patch that adds 3 retries for i2c transactions only for Ventana boards and only for I2C1 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48012
* imx6: imx: thermal: use CPU temperature grade info for thresholdsLuka Perkov2015-12-281-0/+114
| | | | | | | | | | | | | | | This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc accepted upstream. The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead of assuming 85C for passive cooling threshold and 100C for critical base these thresholds off the thermal gade max CPU temperature: - passive threshold: max - 10C - critical threshold: max - 5C Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 48011
* imx6: Add pwm nodesLuka Perkov2015-12-281-0/+276
| | | | | | | | Upstream status: Accepted Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48010
* imx6: ventana: add ecspi3 host controller for GW52xxLuka Perkov2015-12-281-0/+35
| | | | | | | | | | Certain board revisions of the GW52xx support an SPI host controller with a single chip-select going to an off board connector. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48009
* imx6: Add 4.3 supportLuka Perkov2015-12-2812-0/+2539
| | | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx * GW552x * GW551x Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48008
* imx6: drop lingering filesLuka Perkov2015-12-282-1072/+0
| | | | | | | | Since 3.18 kernel support was dropped, remove lingering files. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48007
* 6in4: Corrected tunnelbroker tunnel update URLHauke Mehrtens2015-12-272-2/+2
| | | | | | | | | | | | | | Changed the tunnel update URL into format tunnelbrokers example has, that made it work again. Current method gives "Username/Password Authentication Failed." when I tried the wget line manually and logread eventually says also "6in4: update failed". With corrected URL it works fine: "good 111.222.333.444" or "nochg 111.222.333.444" and logread concurs with success, and tunnel actually updates. Tested-by: Vaasa Hacklab <info@vaasa.hacklab.fi> Signed-off-by: Sami Olmari <sami@olmari.fi> SVN-Revision: 48006
* ar71xx: fix sysupgrade for wnr2200Felix Fietkau2015-12-231-1/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48005
* libnl: fix warning with poll.h include on muslJohn Crispin2015-12-231-0/+13
| | | | | | | | | | | | Warning is: #warning redirecting incorrect #include <sys/poll.h> to <poll. Not a big issue. But it can be annoying when building with -Werror set. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 48004
* binutils: upgrade to version 2.25John Crispin2015-12-231-3/+3
| | | | | | | | | | | | | | Fixes build: config/tc-i386.c: In function 'build_modrm_byte': config/tc-i386.c:6143:31: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses] && !op.bitfield.reg64 != 1 Contains this fix: https://sourceware.org/ml/binutils/2014-09/msg00095.html Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 48003
* lantiq: fix Image BuilderJohn Crispin2015-12-231-2/+1
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48002
* fstools: update to latest git HEADJohn Crispin2015-12-231-2/+2
| | | | | | | | adds stacked ram overlays. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48001
* ca-certificates: update to version 20151214John Crispin2015-12-231-2/+3
| | | | | | | | update to version 20151214 Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com> SVN-Revision: 48000
* swconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINKJohn Crispin2015-12-231-47/+4
| | | | | | | | | As explained earlier, using SWITCH_TYPE_LINK gives more flexibility, it doesn't require e.g. string parsing to read some data. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47999
* swconfig: support receiving SWITCH_TYPE_LINK from kernelJohn Crispin2015-12-233-0/+92
| | | | | | | | | When using cli, print link state the same way kernel used to do it. This will allow kernel switching PORT_LINK from SWITCH_TYPE_STRING. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47998
* swconfig: add SWITCH_TYPE_LINK and support sending link info to user spaceJohn Crispin2015-12-233-0/+74
| | | | | | | | | | | | | So far we were sending link data as a string. It got some drawbacks: 1) Didn't allow writing clean user space apps reading link state. It was needed to do some screen scraping. 2) Forced whole PORT_LINK communication to be string based. Adding support for *setting* port link required passing string and parting it in the kernel space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47997
* lantiq: fix PCI_DEVICE_ID_LANTIQ_PCIEJohn Crispin2015-12-231-10/+2
| | | | | | | | | | | | | | | It's not necessary to define PCI_* if pci_ids.h is included a few lines above. The change to pci_ids.h doesn't look intentional to me, especially since the former value is added to the top of ifxmips_fixup_pcie.c. Both changes were introduced with the kernel 4.1 support patches and were not present in the 3.18 patches. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47996
* lantiq: ltq-adsl-mei: fix typoJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47995
* lantiq: TDW89x0 - increase spi frequencyJohn Crispin2015-12-231-2/+4
| | | | | | | | | | | | | | | | | Use the same max spi frequency as set in u-boot. According to the datasheets, the Q64-104HIP as well as the Winbond 25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the Q64-104HIP couldn't be recognized/initialized if the frequency was > 40MHz. Both chips do support fast read as well. While touching the dts file, I fixed the dtc compiler warnings. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47994
* lantiq: disable SW_PORTMAP usage in the ethernet driverJohn Crispin2015-12-231-5/+4
| | | | | | | | | using the special tag in this way lead to port mirroring for certain types of traffic. fallback to using th PMAC_EWAN register for the wan portmap. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47993
* ledtrig-netdev: reset link status & stats after changing device_nameRafał Miłecki2015-12-231-0/+2
| | | | | | | | | Previously switching to non-existing device (interface) could result in leaving LED on. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47990
* ledtrig-netdev: drop locking from timer callback functionRafał Miłecki2015-12-231-11/+13
| | | | | | | | | | We may just delete timer on every trigger update and then start it again if needed. This will let us avoid both: races and locking in frequently called timer callback. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47987
* ledtrig-netdev: switch rwlock to spinlockRafał Miłecki2015-12-231-20/+20
| | | | | | | | | | Read/write lock was adding useless complexity, there wasn't any real gain in case of this driver. Also switch to _bh variants to avoid deadlocks. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47986
* ar71xx: Update preinit script for new ath10k firmwareJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47985
* ath10k-firmware: Update QCA988X firmware to 10.2.4.97-1John Crispin2015-12-231-2/+11
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47984
* ar71xx: refresh patchesJohn Crispin2015-12-237-19/+19
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47983
* ar71xx: add support for QCA956x ethernetJohn Crispin2015-12-231-0/+166
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47982
* ar71xx: update QCA956x supportJohn Crispin2015-12-232-46/+92
| | | | | | | | | | | - separate qca956x and tp9343 (they use different IDs) - rename qca9561->qca956x for consistency - add missing bits (device reset, gpio output select) - fix wmac setup Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47981
* base-files: allow timezone to be overriden by zonename (proper zoneinfo support)John Crispin2015-12-232-3/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47980
* openvpn: fix configure optionsJohn Crispin2015-12-231-2/+1
| | | | | | | | | | | | | | | - eurephia: commit: Remove the --disable-eurephia configure option - fix option name: http proxy option is now called http-proxy (see configure.ac) fixes: configure: WARNING: unrecognized options: --disable-nls, --disable-eurephia, --enable-http Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47979
* tools/e2fsprogs: remove outdated configure argsJohn Crispin2015-12-231-3/+0
| | | | | | | | | | | | removed upstream in 1.40.5: Don't build e2fsck statically by default anymore 7e8fe327b51051adcbb0d44169b1a933173ce1ff fixes: configure: WARNING: unrecognized options: --disable-shared, --enable-static, --enable-dynamic-e2fsck Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47978
* util-linux: remove outdated configure optionsJohn Crispin2015-12-231-1/+0
| | | | | | | | | | | | | removed upstream in commit: - convert mount/ to module, rename to mount-deprecated/ - build-sys: remove deprecated-mount/ fixes log warning: compile.txt:configure: WARNING: unrecognized options: --enable-new-mount Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47977
* package/lldpd: Remove extraneous selectJohn Crispin2015-12-231-1/+0
| | | | | | | | | | Only the conditional dependency ought to be required; if build fails with JSON there is some other problem at work. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47976
* firmware-utils: allow mkfwimage2 to use - in partition namesJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47975
* dnsmasq: Add option --no-pingJohn Crispin2015-12-231-0/+1
| | | | | | | | | | By default dnsmasq sends an ICMP echo request before allocating an IP address to a host; the uci option noping allows to disable this check. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> SVN-Revision: 47974
* ar71xx: Add support for AirTight Networks C-55John Crispin2015-12-2314-1/+198
| | | | | | | | This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> SVN-Revision: 47973
* rb532: switch to 4.1John Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47972
* rb532: build squashfs image by defaultJohn Crispin2015-12-231-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47971
* rb532: increase kernel partitionJohn Crispin2015-12-231-1/+1
| | | | | | | | | 4.1 got little bit larger than 4MB and I couldn't get lzma loader working on this platform Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 47970
* lantiq: Configure LED polarity for TDW8970 and TDW8980.John Crispin2015-12-232-4/+1
| | | | | | | | | This patch configures the correct ath9k WLAN LED polarity for the TDW8970, and for the TDW8980 as well. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47969
* kernel: make kmod-thermal dependency conditional to match upstream kernel ↵Felix Fietkau2015-12-231-1/+1
| | | | | | | | module configuration dependency for hwmon-pwmfan Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> SVN-Revision: 47968
* kernel: add remaining kernel patch accidentally left out of r47963Felix Fietkau2015-12-231-0/+45
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47966
* gcc: remove v4.6 relictsFelix Fietkau2015-12-231-10/+0
| | | | | | | | | Fixes: commit f17e56eff5b9 ("gcc: remove version 4.6, it is no longer needed") CC: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> SVN-Revision: 47965
* kernel: backport all current pppoe kernel fixes to 3.18Felix Fietkau2015-12-2310-20/+260
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47963
* ledtrig-netdev: update base driver instead of patching it for every kernelRafał Miłecki2015-12-235-160/+4
| | | | | | | | | | All supported kernels require patching ledtrig-netdev in the same way, so it's safe to just move these changes to the base version of this driver. We needed these patches for some old kernels 2.6.36 and 3.11. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47962
* kernel: make kmod-thermal dependency conditional to match upstream kernel ↵Felix Fietkau2015-12-221-1/+1
| | | | | | | | module configuration dependency Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47961
* kernel: make kmod-gpiofan depend on kmod-thermal to fix build errorsFelix Fietkau2015-12-221-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47960
* packages: bump uboot-sunxi to enable H3 supportZoltan Herpai2015-12-224-330/+14
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47959
* mac80211: merge a fix for a ps-poll handling issueFelix Fietkau2015-12-201-0/+48
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47958
* kernel/4.4: add missing config optionsZoltan Herpai2015-12-201-0/+17
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47957
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 05:36:58 +0000