aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.41Kevin Darbyshire-Bryant2021-05-291-2/+2
| | | | | | | | No patches needed refreshing. Tested-on: X86_64 APU2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: update to version 2021-05-22Adrian Schmutzler2021-05-291-4/+4
| | | | | | | | | | | This update only adds one commit: b102f19bcc53 tests: Opportunistic Wireless Encryption - SA Query The main reason for the bump is to have a newer PKG_SOURCE_DATE, so we can reset PKG_RELEASE to 1 (this has not been done for the most recent bump), and replace it with AUTORELEASE. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: simplify setting device MACRafał Miłecki2021-05-281-11/+8
| | | | | | | | | | | | | | 1. Move code above interface generation It results in more logical order. Device gets its config section above interface section. 2. Drop the loop We have separated code handling bridges now so $device should be guaranteed to contain a single device name. 3. Drop section name It's not required by netifd or LuCI & it's not needed by this script as $device contains a single device name now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ubox: fix init script validation of log_ip optionJo-Philipp Wich2021-05-282-2/+2
| | | | | | | | The underlying logread process uses usock() to handle remote connections which is able to handle both hostnames and IP addresses. Ref: https://github.com/openwrt/luci/issues/5077 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add support for Wavlink WL-WN578A2Thomas Aldrian2021-05-284-3/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug wireless router. This device is also sold under the name SilverCrest SWV 733 A2. Device Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high - Buttons: Reset, WPS - Sliding mode switch: AP, repeater, client - Small sliding power switch Flashing instructions: U-Boot launches TFTP client if WPS button is pressed during power-on. Configure as follows: - Server IP: 192.168.10.100 - Filename (rename sysupgrade file to this): firmware.bin Flashing should not take more than a minute, device will reboot automatically. Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
* kernel: bump 5.10 to 5.10.40Rui Salvaterra2021-05-273-4/+4
| | | | | | | | Automatically refreshed: generic/hack-5.10/902-debloat_proc.patch generic/pending-5.10/110-perf-jevents-fix-getting-maximum-number-of-fds.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* hostapd: support verbose build using V=scFelix Fietkau2021-05-271-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: generate network config with "device" optionsRafał Miłecki2021-05-274-22/+22
| | | | | | | Replace "ifname" with "device" as netifd has been recently patches to used the later one. It's more clear and accurate. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: ACS: fix channel 100 frequencyDavid Bauer2021-05-262-1/+31
| | | | | | | | | | | Channel 100 is a valid channel to choose for 80MHz operation. However, it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel assigned to this frequency. Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz operation again. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add missing v5.4 SPI chipselect patchDavid Bauer2021-05-261-0/+26
| | | | | | | | | The patch was not applied to the v5.4 target, thus breaking Kernel 5.4 on devices with multiple flash chips attache to the SPI bus. Fixes commit bd54e739541b ("ath79: set number of chipselect lines") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: fix AutoLoad parameter for uleds moduleEvgeny Kolesnikov2021-05-261-1/+1
| | | | | | | | The name of the module is 'uleds', not 'leds-uleds'. Signed-off-by: Evgeny Kolesnikov <evgenyz@gmail.com> [improve commit title] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for JCG Q20Chukun Pan2021-05-266-0/+201
| | | | | | | | | | | | | | | | | | | | | | | | | JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. MAC addresses map: 0x00004 *:3e wlan2g/wlan5g 0x3fff4 *:3c lan/label 0x3fffa *:3c wan Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: add support for cudy WR2100Leon M. George2021-05-263-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac MT7603E / MT7615E Ethernet: 5x Gbit ports Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Signed-off-by: Leon M. George <leon@georgemail.eu> [remove non-required switch-port node - remove trgmii phy-mode] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for TP-Link Archer C6U v1 (EU)Georgi Vlaev2021-05-264-1/+264
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TP-Link Archer C6U v1 (EU). The device is also known in some market as Archer C6 v3. This patch supports only Archer C6U v1 (EU). Specifications: -------------- * SoC: Mediatek MT7621AT 2C2T, 880MHz * RAM: 128MB DDR3 * Flash: 16MB SPI NOR flash (Winbond 25Q128) * WiFi 5GHz: Mediatek MT7613BEN (2x2:2) * WiFi 2.4GHz: Mediatek MT7603EN (2x2:2) * Ethernet: MT7630, 5x 1000Base-T. * LED: Power, WAN, LAN, WiFi 2GHz and 5GHz, USB * Buttons: Reset, WPS. * UART: Serial console (115200 8n1), J1(GND:3) * USB: One USB2 port. Installation: ------------ Install the OpenWrt factory image for C6U is from the TP-Link web interface. 1) Go to "Advanced/System Tools/Firmware Update". 2) Click "Browse" and upload the OpenWrt factory image: openwrt-ramips-mt7621-tplink_archer-c6u-v1-squashfs-factory.bin. 3) Click the "Upgrade" button, and select "Yes" when prompted. Recovery to stock firmware: -------------------------- The C6U bootloader has a failsafe mode that provides a web interface (running at 192.168.0.1) for reverting back to the stock TP-Link firmware. The failsafe interface is triggered from the serial console or on failed kernel boot. Unfortunately, there's no key combination that enables the failsafe mode. This gives us two options for recovery: 1) Recover using the serial console (J1 header). The recovery interface can be selected by hitting 'x' when prompted on boot. 2) Trigger the bootloader failsafe mode. A more dangerous option is force the bootloader into recovery mode by erasing the OpenWrt partition from the OpenWrt's shell - e.g "mtd erase firmware". Please be careful, since erasing the wrong partition can brick your device. MAC addresses: ------------- OEM firmware configuration: D8:07:B6:xx:xx:83 : 5G D8:07:B6:xx:xx:84 : LAN (label) D8:07:B6:xx:xx:84 : 2.4G D8:07:B6:xx:xx:85 : WAN Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
* ramips: add support for TP-Link Archer A6 v3Vinay Patil2021-05-264-1/+244
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for the TP-Link Archer A6 v3 The router is sold in US and India with FCC ID TE7A6V3 Specification ------------- MediaTek MT7621 SOC RAM: 128MB DDR3 SPI Flash: W25Q128 (16MB) Ethernet: MT7530 5x 1000Base-T WiFi 5GHz: Mediatek MT7613BE WiFi 2.4GHz: Mediatek MT7603E UART/Serial: 115200 8n1 Device Configuration & Serial Port Pins --------------------------------------- ETH Ports: LAN4 LAN3 LAN2 LAN1 WAN _______________________ | | Serial Pins: | VCC GND TXD RXD | |_____________________| LEDs: Power Wifi2G Wifi5G LAN WAN Build Output ------------ The build will generate following set of files [1] openwrt-ramips-mt7621-tplink_archer-a6-v3-initramfs-kernel.bin [2] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-factory.bin [3] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-sysupgrade.bin How to Use - Flashing from TP-Link Web Interface ------------------------------------------------ * Go to "Advanced/System Tools/Firmware Update". * Click "Browse" and upload the OpenWrt factory image: factory.bin[2] * Click the "Upgrade" button, and select "Yes" when prompted. TFTP Booting ------------ Setup a TFTP boot server with address 192.168.0.5. While starting U-boot press '4' key to stop autoboot. Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin From u-boot command prompt run tftpboot followed by bootm. Recovery -------- Archer A6 V3 has recovery page activated if SPI booting from flash fails. Recovery page can be activated from serial console only. Press 'x' while u-boot is starting Note: TFTP boot can be activated only from u-boot serial console. Device recovery address: 192.168.0.1 Thanks to: Frankis for Randmon MAC address fix. Signed-off-by: Vinay Patil <post2vinay@gmail.com> [remove superfluous factory image definition, whitespacing] Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: sync nl80211.h with upstream and backport a WPA3 related commitFelix Fietkau2021-05-266-35/+659
| | | | | | Fixes compatibility issues with the latest hostapd update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: image: drop BOOT_SCRIPT and fix DEVICE_NAMEPiotr Dymacz2021-05-262-14/+3
| | | | | | | | | | | | | | This fixes Gateworks Ventana 'DEVICE_NAME' variable which value wasn't adjusted during migration to common 'vendor_model' image naming scheme (fixes: FS#3825). Furthermore, drop unused 'Build/boot-scr' recipe, get rid of redundant 'BOOT_SCRIPT' variable (use already provided 'DEVICE_NAME' instead) and drop custom 'DEVICE_NAME' variable from SolidRun CuBox-i image recipe (use default one instead). Fixes: cbc8bcfbaa ("imx6: image: use vendor_model scheme") Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mac80211: add more HE capabilitiesFelix Fietkau2021-05-261-5/+81
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix center freq selection for 6 GHzFelix Fietkau2021-05-261-6/+20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix adding back stations after a missed deauth/disassocFelix Fietkau2021-05-263-11/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: update to version 2021-05-21Felix Fietkau2021-05-2653-2295/+238
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: set hostapd op_class for 6 GHzFelix Fietkau2021-05-261-0/+8
| | | | | | This is needed to disambiguate it from 5 GHz channels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rework default config scriptFelix Fietkau2021-05-261-20/+85
| | | | | | | Emit the new band option instead of hwmode Support 6 GHz band and HE options Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: make use of the new 'band' optionFelix Fietkau2021-05-261-14/+31
| | | | | | | Use it to look up frequencies only in the configured band to better deal with channel number overlap Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add 6 GHz support to mac80211_hwsimFelix Fietkau2021-05-262-0/+197
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireless-regdb: update to version 2021.04.21Felix Fietkau2021-05-261-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iw: update to 8fab0c9eAndre Heider2021-05-262-20/+21
| | | | | | | | | | | | | | | | | | | | | | | | | This fixes `iw dev wlan0-mesh station dump`. 8fab0c9 iw: fix ftm_request missing arguments segfault e816fbc iw: fix mgmt dump missing arguments segfault 5d9d1b8 iw: Fix timestamp output on 32-bit architectures 4b25ae3 iw: fix pointer arithmetic in __print_he_capa c3df363 iw: add option to print human readable event time cd64525 iw: print ctrl port tx status event 0ba98b9 iw: use correct type in policy check for mesh 9e38dee iw: scan: fixup HE caps whitespace 17e8564 iw: scan: parse HE capabilities 5735e58 iw: util: factor out HE capability parser 6d8d507 iw: scan: add extension tag parsing b4e1ec4 man: update wikipage URL, reformat SEE ALSO section c56036a iw: enable 80MHz support for 6GHz band 11s mesh fa72728 iw: handle positive error codes gracefully 7ba9093 iw: scan: add flag for scanning colocated ap 5ec60ed iw: Add 'coloc' and 'flush' options to sched_scan f8ade75 iw: update wikipage URL b6f2dac iw: Add support for specifying the 160MHz bandwidth when setting the channel/frequency Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: add support for configuring rts thresholdFelix Fietkau2021-05-261-1/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix max_oper_chwidth setting for HEFelix Fietkau2021-05-261-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add additional radius optionsJohn Crispin2021-05-261-2/+17
| | | | | | | | | - add functionality to configure RADIUS NAS-Id and Operator-Name - add functionality to configure RADIUS accounting interval - enable RADIUS "Chargeable User Identity" Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add extra options for hotspot 2.0 / interworkingFelix Fietkau2021-05-261-4/+25
| | | | | Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: report radar detected events via ubusFelix Fietkau2021-05-263-0/+38
| | | | | | Events are reported on all BSS interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: improve channel switch supportFelix Fietkau2021-05-261-3/+9
| | | | | | | | Instead of requiring the user to call it on each BSS individually, run it on all BSSs internally. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add missing inline stubs for ubus vlan event supportFelix Fietkau2021-05-261-0/+8
| | | | | | Only used when building without ubus support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix civic location optionJohn Crispin2021-05-261-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* netifd: update to the latest masterRafał Miłecki2021-05-261-3/+3
| | | | | | | 899c2a4 interface: support "device" attribute and deprecate "ifname" 62e3cb5 scripts/netifd-wireless.sh: add support for specifying the operating band Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* opkg: use $(PROJECT_GIT), $(AUTORELEASE) and SPDXNick Hainke2021-05-251-6/+4
| | | | | | | | | 1) Use SPDX license headers to be machine readable. 2) Update copyright to 2021. 3) Use $(PROJECT_GIT) instead of manually specifying the git url. 4) Use $(AUTORELEASE) to automatically set the correct PKG_RELEASE. Signed-off-by: Nick Hainke <vincent@systemli.org>
* build: fix regression for kernels < 5.10Sebastian Kemper2021-05-251-2/+7
| | | | | | | | | | | | | | | | | | | | This fixes a regression introduced with commit 5ed1e5140a80558ab47fd70410ae3242bed5becf ("build: build kernel image before building modules/packages"). Before this commit the make target would always include "modules", resulting in a MODPOST and a complete Module.symvers file. Since this commit a MODPOST of the kernel modules is not guaranteed for kernels < 5.10. This results in some broken SDKs in which external packages that depend on exported symbols from kernel modules fail to compile. Adding "modules" back to the calls to the CompileImage defines fixes the regression. For kernels > 5.10 this is not needed, but it doesn't cause any harm either. Tested with kernels 5.4.x and 5.10.x. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* kernel: fix a perf build errorFelix Fietkau2021-05-251-0/+24
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: mention SRV support in help messagePaul Spooren2021-05-241-0/+30
| | | | | | | The SRV was added some time ago and should be mentioned in the short help message to avoid confusion about missing features. Signed-off-by: Paul Spooren <mail@aparcar.org>
* nat46: fix memory leakHans Dedecker2021-05-241-3/+3
| | | | | | 0d5860d fix memory leak in nat46_netdev_destroy().The netdev is forgotten to free in nat46_netdev_destroy function (#26) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: fix configuration generation of network if "bridge" existsINAGAKI Hiroshi2021-05-241-2/+3
| | | | | | | | | | | | | | | | After the commit 43fc720657c6e3b30c6ed89d7227ee6e646c158b ("base-files: generate "device UCI type section for bridge"), the wrong network configuration is generated for the devices that already have the bridge device section for VLAN, such as the devices in realtek target. As a result, the bridge device by additional "device" section is specified to the "ports" option in the "bridge-vlan" section and netifd shuts down the switch and the ethernet when the network service started. Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rmilecki: use $ports for generate_bridge_vlan argument] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: support setting bridge MAC addressRafał Miłecki2021-05-241-0/+2
| | | | | Fixes: 43fc720657c6 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* treewide: Mark packages nonshared if they depend on @TARGET_Hauke Mehrtens2021-05-2412-0/+24
| | | | | | | | | | | | | | This marks all packages which depend on a target with @TARGET nonshared. If they are not marked nonshared they would be build by the SDK build and if this happens with a different SDK, then the SDK from the target the package depends on, the package would not be added to the index. This should fix the image builder for some of these packages. This should fix the image builder at least for bcm27xx/bcm2710 and bcm4908/generic. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: update mtd parser patchesHauke Mehrtens2021-05-236-85/+94
| | | | | | | This updates the patches to match the versions included in the mtd subsystem for the next Linux kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport "mvmdio avoid error message for optional IRQ"Daniel González Cabanelas2021-05-231-0/+33
| | | | | | | | | Rid of kernel error message: [ 0.780828] orion-mdio d0072004.mdio: IRQ index 0 not found on Marvell targets backporting the kernel commit fa2632f74e57 Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* generic: mt7530: fix EEE patchDENG Qingfang2021-05-231-1/+1
| | | | | | | The higher 16-bit of EEE register was overwritten by mistake, fix that. Fixes: 5b9ba4a93e83 ("generic: mt7530: support adjusting EEE") Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* ccache: Build with ENABLE_DOCUMENTATION=OFFDavid Adair2021-05-231-0/+3
| | | | | | | | | | | | | This adjusts the Makefile to use the new option to turn off the doc builds. It will not cause any problems except a warning about unused options if combined with a ccache source missing the upstream patch. Since a config setting is required to re-enable the doc build this is equivalent to unconditionally disabling the docs if the config setting is not created. Signed-off-by: David Adair <djabhead@aol.com>
* mac80211: fix ATH_REG_DYNAMIC_USER_REG_HINTSRobert Marko2021-05-231-2/+2
| | | | | | | | | | | | ATH_REG_DYNAMIC_USER_REG_HINTS is currently not being set as mac80211 tries to set it as m which is not possible as its boolean only. Since its used alongside user regulatory, move it to USER_REGD. This is required for ath11k to accept regulatory changes, otherwise it wont accept any changes and will simply force US. Signed-off-by: Robert Marko <robimarko@gmail.com>
* prereq-build: g++ formatting and consistency fixesKarl Palsson2021-05-231-2/+2
| | | | | | | | | | | | Remove \n that mangles output, and fix inconsistent version name check. Example before: Build dependency: Please install the GNU C++ Compiler (g++) 6 or later Build dependency: \nPlease reinstall the GNU C++ Compiler (4.8 or later) - it appears to be broken Build dependency: Please install ncurses. (Missing libncurses.so or ncurses.h) Signed-off-by: Karl Palsson <karlp@tweak.net.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 00:49:07 +0000