aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel/modules: add kmod-inet-diag packageTianling Shen2022-03-131-0/+25
| | | | | | | Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: bump 5.10 to 5.10.104John Audia2022-03-134-14/+14
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* tools/ccache: update to 4.6Rosen Penev2022-03-131-2/+2
| | | | | | Full changelog: https://ccache.dev/releasenotes.html#_ccache_4_6 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/fakeroot: update to 1.28Rosen Penev2022-03-132-3/+3
| | | | | | | | Refreshed patches. Upstream says there's only a bugfix for GNU Hurd. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/cmake: update to 3.22.3Rosen Penev2022-03-131-2/+2
| | | | | | Seems to be mostly pthread fixes. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/mtools: update to 4.0.38Rosen Penev2022-03-131-2/+2
| | | | | | No real changelog available. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* iptables: backport missing init_extensions6() callsEtienne Champetier2022-03-132-1/+69
| | | | | | | This fixes ip6tables-nft no being able to use built-in extensions like icmp6. Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ipset: add backport patch for IPv6 nftables ipset-translationFlorian Eckert2022-03-132-1/+83
| | | | | | | | | | | | | | When porting mwan3 from iptables to nftables I tried the new translation tool for ipset ipset-translate. I noticed that no IPv6 ipset can be created with the tool. I have reported the problem to the upstream project and the following patch fixes the problem. Until this upsream is included in a new release, this patch should be used in Openwrt. https://lore.kernel.org/netfilter-devel/20220228190217.2256371-1-pablo@netfilter.org/T/#m09cc3cb738f2e42024c7aecf5b7240d9f6bbc19c Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* tools/expat: enable DTDRosen Penev2022-03-131-1/+1
| | | | | | Fixes gdb usage, which depends on it. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/expat: update to 2.4.7Rosen Penev2022-03-131-2/+2
| | | | | | Mostly a bug fix to the bug fix to CVE-2022-25236 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: Apply pinctrl DTS changes to TL-WPA8631PJoe Mullally2022-03-131-9/+13
| | | | | | | | | Applies changes from 7774b86019 to new device committed later. Fix some whitespace in the DTS. Use standard model name format in DTS. Fixes: 6c743c3006f9 ("ramips: Add support for TP-Link TL-WPA8631P v3") Signed-off-by: Joe Mullally <jwmullally@gmail.com> Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* ath79: Add LED labels for Airtight C-75Sven Schwermer2022-03-131-0/+2
| | | | | | | | | Keep labels since OpenWrt userland tooling (get_dt_led) depends on them to find the LED instances referenced by the led-* aliases. The label for the amber power LED was removed in 4eefdc7adb. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* ramips: update WLAN MAC address of JCG Y2Chukun Pan2022-03-131-0/+4
| | | | | | | | MAC addresses on OEM firmware: 04:xx:xx:xx:xx:c8 factory 0x4 wlan2g 06:xx:xx:xx:xx:c8 [not on flash] wlan5g Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: update WLAN MAC address of Phicomm K2PChukun Pan2022-03-132-2/+13
| | | | | | | The wireless mac address difference of this machine is similar to that of D-Link DIR-853-R1, so use the same practice. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: Add support for Dual-Q H721Dawsen Gao2022-03-132-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dual-Q H721 is a router platform board, it is the smaller model of the U7621-06. The device has the following specifications: MT7621AT (880 MHz) 256 of RAM (DDR3) 16 MB of FLASH (MX25l12805d SPI) 5x 1 Gbps Ethernet (MT7621 built-in switch) 1x M.2 (NGFF) 3.7V 3A max for 5G M.2 Modem work at USB3.0 mode 1x Minipcie 3.7V 3A max for LTE Modem work at USB2.0 Mode 2x Minipcie for WIFI card 4x Lan+1x Wan 10/100M/1000M RJ45 port 14x LEDs (1x GPIO-controlled) 1x reset button 1x UART header (4-pins) 1x mico SD-card reader 1x DC jack for main power (5~27 V) The following has been tested and is working: Ethernet switch miniPCIe slots (tested with Wi-Fi cards and LTE modem cards) miniSIM slot (works with normal size simcard) sysupgrade reset button micro SD-card reader Installation: This board has no locked down bootloader. The seller can be asked to install openwrt, so upgrades are standard sysupgrade method. Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. Signed-off-by: Dawsen Gao <dawsen_gao@163.com> [change author name (used SoB one), add ethernet pinctrl, apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* base-files: call "sync" after initial setupRafał Miłecki2022-03-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenWrt uses a lot of (b)ash scripts for initial setup. This isn't the best solution as they almost never consider syncing files / data. Still this is what we have and we need to try living with it. Without proper syncing OpenWrt can easily get into an inconsistent state on power cut. It's because: 1. Actual (flash) inode and data writes are not synchronized 2. Data writeback can take up to 30 seconds (dirty_expire_centisecs) 3. ubifs adds extra 5 seconds (dirty_writeback_centisecs) "delay" Some possible cases (examples) for new files: 1. Power cut during 5 seconds after write() can result in all data loss 2. Power cut happening between 5 and 35 seconds after write() can result in empty file (inode flushed after 5 seconds, data flush queued) Above affects e.g. uci-defaults. After executing some migration script it may get deleted (whited out) without generated data getting actually written. Power cut will result in missing data and deleted file. There are three ways of dealing with that: 1. Rewriting all user-space init to proper C with syncs 2. Trying bash hacks (like creating tmp files & moving them) 3. Adding sync and hoping for no power cut during critical section This change introduces the last solution that is the simplest. It reduces time during which things may go wrong from ~35 seconds to probably less than a second. Of course it applies only to IO operations performed before /etc/init.d/boot . It's probably the stage when the most new files get created. All later changes are usually done using smarter C apps (e.g. busybox or uci) that creates tmp files and uses rename() that is expected to be atomic. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* uqmi: update to git HEADDaniel Golle2022-03-121-3/+3
| | | | | | 44dd095 uqmi: corrected too short received SMS Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uqmi: set CID during 'query-data-status' operationLech Perczak2022-03-121-2/+2
| | | | | | | | | | | | | Modems used in ZTE mobile broadband routers require to query the data session status using the same CID as one used to establish the session, otherwise they will report the session as "disconnected" despite reporting correct PDH in previous step. Without this change, IPv6 connection on these modems doesn't establish properly. In IPv4 this bug is present as well, but for some reason querying of IPv4 status works using temporary CID, this however seems noncompliant with QMI specifications, so fix it as well. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* bcm4908: include U-Boot in imagesRafał Miłecki2022-03-111-3/+32
| | | | | | This is a step forward in adding support for devices with U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-bcm4908: add package with BCM4908 U-BootRafał Miłecki2022-03-114-0/+181
| | | | | | | New BCM4908 devices come with U-Boot instead of CFE. Firmwares for such devices has to include U-Boot. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* imx: fix USB supportPiotr Dymacz2022-03-111-0/+1
| | | | | | | | | | | The ChipIdea USB kernel driver gained support for disabling glue drivers in 5.8, see upstream commmit: 95caa2ae70fd ("usb: chipidea: allow disabling glue drivers if EMBEDDED"). This enables 'CONFIG_USB_CHIPIDEA_IMX' in the 'imx' target kernel config which brings back USB support. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* x86: legacy: enable pata_sis driverMatthias Schiffer2022-03-101-0/+1
| | | | | | | | This driver is needed to boot from CompactFlash on the Siemens Futro S400. The device has an AMD NX1500 CPU, which seems to be unsupported by the geode subtarget, so it must use legacy. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: wwan: add MeigLink SLM750 modem supportDaniel Golle2022-03-101-0/+33
| | | | | | | | | | Add patch found in Teltonika RUT9_R_00.07.01.4 GPL SDK download[1] adding USB IDs of the MeigLink SLM750 to the relevant kernel drivers. Newer versions of Teltonika's 2G/3G/4G RUT9XX WWAN router series come with this kind of modem. [1]: https://wiki.teltonika-networks.com/view/GPL Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iptables: add iptables-mod-socketYousong Zhou2022-03-101-4/+15
| | | | | | | | | Previously libxt_socket.so was included in iptables-mod-tproxy. It was missed out when trying to make kmod-ipt-socket and kmod-ipt-tproxy separate packages Fixes: 4f443c88 ("netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxy") Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* CI: move logs/ to GITHUB_WORKSPACEPaul Spooren2022-03-091-1/+6
| | | | | | | | | | | Artifacts can only be uploaded from inside the GITHUB_WORKSPACE. While the Linux CI jobs run inside that per default, a special case-sensitive mount outside the GITHUB_WORKSPACE is used for macOS builds. To make log artifacts work for both macOS and Linux, move logs/ folder to GITHUB_WORKSPACE on failures. Signed-off-by: Paul Spooren <mail@aparcar.org>
* toolchain: binutils: add support for version 2.38Rui Salvaterra2022-03-097-1/+92
| | | | | | | | | | | | While at it, also fix the download.xs4all.nl and add ftp.gnu.org to the GNU mirrors, as it seems to be updated faster. Deleted (upstreamed): 600-Close_the_file_descriptor.patch [1] [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=5a98fb7513b559e20dfebdbaa2a471afda3b4742 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ramips: allow USB power control on TP-Link MR3020v3Dmitry Chigiryov2022-03-091-1/+12
| | | | | | | | | | | | | By switching EPHY_LED4_N_JTRST_N from EPHY_LED4_N to GPIO#39 we can control USB port power an all current revisions of MR3020v3. It was not a thing on some first revisions, pin was unused. But for now on all current MR3020v3 boards EPHY_LED4_N_JTRST_N pin is connected to USB power key. Also it was not used as EPHY indicator on any revision of the board. Signed-off-by: Dmitry Chigiryov <dmitry.chigiryov@ya.ru> [changed author address (used SoB one)] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: fix DEVICE_VENDOR for unbranded devicesSungbo Eo2022-03-095-9/+9
| | | | | | | | | | | | | | | In commit ee66fe4ea9a6 ("ramips: convert DEVICE_TITLE to new variables"), DEVICE_VENDOR of some unbranded devices were set incorrectly: * WR512-3GN is not a dev board from Ralink. * "XDX-RN502J" is the whole model name and should be not split. This patch sets their DEVICE_VENDOR to "Unbranded", and changes their DTS model properties accordingly. Ref: d0bf15f23595 ("ramips: add support for A5-V11 board (resubmit)") Ref: 9085b05d9e71 ("ramips: rt305x: support for wr512-3gn-like routers") Ref: 0e486d2fd297 ("ramips: add support for unbranded XDX-RN502J board") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: mt7621: add support for Zbtlink ZBT-WG1608Kim Namu2022-03-094-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim Namu <namu@theseed.io>
* ramips: add support for Asus RT-AC1200Ray Wang2022-03-093-26/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Asus RT-AC1200 is a 2.4/5GHz dual band AC router, based on MediaTek MT7628AN. Specification: * SoC: MT7628AN * RAM: DDR2 64 MiB * Flash: 16 MiB NOR (W25Q128BV) * Wi-Fi: * 2.4GHz: SoC Built-in * 5GHz: MT7612EN * Ethernet: 5x 100Mbps * Switch: SoC built-in * USB: 1x 2.0 Flash Layout: 0x0000000-0x0030000 : "bootloader" 0x0030000-0x0040000 : "nvram" 0x0040000-0x0050000 : "factory" 0x0050000-0x1000000 : "firmware" MAC address: LAN: factory 0x28 WAN: factory 0x22 2.4G: factory 0x4 5G: factory 0x8004 Installation via **recovery** mode: 1. Download the Asus recovery firmware (windows) tool from http://dlcdnet.asus.com/pub/ASUS/LiveUpdate/Release/Wireless/Rescue.zip 2. Set your ethernet IP manually 192.168.1.5 / 255.255.255.0 with NO gateway. 3. Plug in your ethernet to LAN port 1 on the router. 4. Load up the recovery software with the firmware file, but don't press "Upload" yet. 5. Plug in the router to power WHILE HOLDING the reset button in. While CONTINUING to hold the button, select "Upload" Continue to hold the reset button in until it finishes and verifies! 6. If that doesn't work try pressing "Upload" first just before you do step 5. At some point while holding reset the rescue tool will finally detect and upload the firmware. That's when you can let go of the reset button. 7. The router will reboot and not much will happen. Wait a minute or 2. 8. Power off and on the router again. Voila. Set everything your Ethernet IP back to DHCP (automatically) and you're good to go. Revert to stock firmware: 1. Install stock image via recovery mode. Tested-by: Ivan Pavlov <AuthorReflex@gmail.com> Signed-off-by: Ray Wang <raywang777@foxmail.com>
* tools: zip: make encrypted archives reproducibleSungbo Eo2022-03-091-0/+75
| | | | | | | | | | | Zip always try to generate new encryption header depending on execution time and process id, which is far from being reproducible. This commit changes the zip srand() seed to a predictable value to generate reproducible random bytes for the encryption header. This will compromise the goal of secure archive encryption, but it would not be a big problem for our purpose. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* tools: zip: fetch SOURCE_DATE_EPOCH directlySungbo Eo2022-03-093-146/+41
| | | | | | | | | Remove "--mtime" option introduced in commit 18c9faa03211 ("tools: zip: add option for reproducible archives") and instead fetch SOURCE_DATE_EPOCH environment variable directly in the code. Ref: https://sourceforge.net/p/infozip/patches/25/ Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: use UTC for zip timestampSungbo Eo2022-03-091-2/+1
| | | | | | | | Zip uses DOS timestamp for mtime which is stored in local time and hence depends on the timezone of the build system. Force zip to use UTC timezone to make image builds more reproducible. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for Renkforce WS-WN530HP3-ABirger Koblitz2022-03-083-0/+171
| | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Renkforce WS-WN530HP3-A ceiling- mountable Wireless Access Point, which is powered over PoE. Hardware: - SoC: Mediatek MT7621DAT - RAM: 128MiB on SoC - Flash: 16MiB GigaDevice GD25Q128C - 2.4Ghz Wifi: Mediatek MT603EN - 5GHz Wifi: MT613BEN - Ethernet: - 1x 1GBit WAN port, passive PoE capable - 2x 1GBit LAN ports LEDs: 1x Bi-Color LED (red/blue) Buttons: 1x Reset Button, 1x Power Button Installation: Power on the access point and immedately press the reset button for 10 seconds. Connect web-browser to 192.168.10.1 and upload sysupgrade image. Flash uploaded image and wait about 2 minutes for reboot. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixed SoB]
* ath79: fix button labels for WZR-HP-AG300H and WZR-600DHPJeffery To2022-03-081-0/+6
| | | | | | | | These were present in ar71xx but overlooked when porting to ath79. Fixes: 480bf2827392 ("ath79: add support for Buffalo WZR-HP-AG300H") Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* ath79: add support for MikroTik RouterBOARD mAP liteThibaut VARÈNE2022-03-085-1/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. See https://mikrotik.com/product/RBmAPL-2nD for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in - 4 user-controllable LEDs: · 1x power (green) · 1x user (green) · 1x lan (green) · 1x wlan (green) Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq806x: provide ramoops for R7800/XR500 by defaultHannu Nyman2022-03-081-2/+2
| | | | | | | | | | | | | Add kmod-ramoops to the default set of device packages in R7800 and XR500, so that the ramoops kernel crash logs are provided by default for these routers. The capability was earlier defined by 97158fe1 and cf346dfa, but the feature was not yet turned on by default. The possible kernel crashes are stored into /sys/fs/pstore/* Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ath79: Add green power LED to Airtight C-75Sven Schwermer2022-03-081-7/+15
| | | | | | | In addition to the missing green LED definition, the polarity of the amber power LED was incorrect which is fixed here. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* lantiq: xrx200: fix use after free bugAleksander Jan Bajkowski2022-03-084-0/+30
| | | | | | | The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* uboot-envtools: add support for I-O DATA BSH-G24MBINAGAKI Hiroshi2022-03-071-0/+8
| | | | | | | This patch adds the device-specific configuration to u-boot-envtools for I-O DATA BSH-G24MB switch. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add support for I-O DATA BSH-G24MBINAGAKI Hiroshi2022-03-072-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA BSH-G24MB is a 24 port gigabit switch, based on RTL8382M. Specification: - SoC : Realtek RTL8382M - RAM : DDR2 128 MiB (Nanya NT5TU128M8HE-AC) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FM2I-10G) - Ethernet : 10/100/1000 Mbps x24 - port 1-8 : RTL8218B - port 9-16 : RTL8218B (SoC) - port 17-24 : RTL8218B - LEDs/Keys : 2x, 1x - UART : pin header on PCB - JP2: 3.3V, TX, RX, GND from rear side - 115200n8 - Power : 100 VAC, 50/60 Hz - Plug : IEC 60320-C13 Flash instruction using sysupgrade image: 1. Boot BSH-G24MB normally 2. Connect BSH-G24MB to the DHCP enabled network 3. Find the device's IP address and open the WebUI and login Note: by default, the device obtains IP address from DHCP server of the network 4. Open firmware update page ("ファームウェア アップデート") 5. Rename the OpenWrt sysupgrade image to "bsh-g24mb_v100.image" and select it 6. Press apply ("適用") button to perform update 7. Wait ~150 seconds to complete flashing Note: - BSH-G24MB has a power-related LED ("電源"), but it's not connected to the GPIO of the SoC or RTL8231 and cannot be controlled. Instead of it, use system status LED on other than running-state. - "sys_loop" LED indicates system status and loop-detection status in stock firmware. - BSH-G24MB has 2x os-image partitions named as "RUNTIME"/"RUNTIME2" in 16 MiB SPI-NOR flash and the size of image per partition is only 6848 KiB. The secondary image is never used on stock firmware, so also use it on OpenWrt to get more space. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* nftables: update to version 1.0.2Josef Schlehofer2022-03-073-47/+32
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://lwn.net/ml/netdev/YhO5Pn+6+dgAgSd9@salvia/ Patches: removed: - 001-parser-allow-quoted-string-in-flowtable_expr_member: it is now part of upstream release [1] added: - 001-examples-compile-with-make-check.patch: backported from [2], it fixes: nft-json-file.c:3:10: fatal error: nftables/libnftables.h: No such file or directory 3 | #include <nftables/libnftables.h> | ^~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. [1] https://git.netfilter.org/nftables/commit/?h=v1.0.2&id=07af4429241c9832a613cb8620331ac54257d9df [2] https://git.netfilter.org/nftables/commit/?id=18a08fb7f0443f8bde83393bd6f69e23a04246b3 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* linux-firmware: Update to version 20220209Hauke Mehrtens2022-03-072-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This switches the iwlwifi-firmware-ax200 file to API version 66, this is the most recent version supported by our driver. The following files used in OpenWrt changed: amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_dmcub.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010b.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_0303.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010b.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_0303.bin ar3k-firmware/lib/firmware/qca/rampatch_usb_00130200.bin ar3k-firmware/lib/firmware/qca/rampatch_usb_00130201.bin iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-66.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0-66.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode rtl8822ce-firmware/lib/firmware/rtw88/rtw8822c_fw.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm4908: fix init on CFE devicesRafał Miłecki2022-03-071-1/+1
| | | | | | | exit in preinit script was stopping whole process Fixes: 93259e8ca261 ("bcm4908: support "rootfs_data" on U-Boot devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bpf-headers: ship a modified version of stdarg.h from musl to fix ebpf build ↵Felix Fietkau2022-03-072-0/+22
| | | | | | on glibc Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/binutils: remove old versionsFelix Fietkau2022-03-0715-362/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2022-03-061-3/+3
| | | | | | | | | | | 3276aed81c73 move run_cmd() to main.c 558eabc13c64 map: move dns host based lookup code to a separate function 6ff06d66c36c dns: add code for snooping dns packets a78bd43c4a54 ubus: remove dnsmasq subscriber 9773ffa70f1f map: process dns patterns in the order in which they were defined f13b67c9a786 dns: allow limiting dns entry matching to cname name Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: net: dsa: configure better brport flags when ports leave the bridgeBjørn Mork2022-03-061-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensures that the DSA driver sets exactly the same default flags as the bridge when a port joins or leaves. Without this we end up with a confusing flag mismatch, where DSA and bridge ports use different sets of flags. This is critical as the "learning" mismatch will be harmful to the network, causing all traffic to be flooded on all ports. The original commit was buggy, trying to set the flags one-by-one in a loop. This was not supported by the API and the end result was that all but the last flag were cleared. This bug was implicitly fixed upstream by commit e18f4c18ab5b ("net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes"). This is a minimum temporary stop measure fix for the critical lack of "learning" only. The major API change associated with a full v5.12+ backport is neither required nor wanted. A simpler fix, moving the call to dsa_port_bridge_flags() out of the loop, has therefore been merged into this modified backport. Fixes: afa3ab54c03d ("realtek: Backport bridge configuration for DSA") Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> [fix typos in commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: use parser_trx for Buffalo WCR-1166DSINAGAKI Hiroshi2022-03-062-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WCR-1166DS uses trx-fomatted firmware and the custom magic number (0x5C436F74, "\Cot") is required for OpenWrt installation from OEM WebUI. But the current mtdsplit_trx doesn't support the custom magic number and fail to parse and split to kernel and rootfs when the factory image is flashed. Then, the kernel fails to mount rootfs automatically and panics. Before the commit fddc78bc116bc043fb5cd92dbc45cfd054c21af8, mtdsplit_trx was patched in ramips target and the device-specific magic number was supported only for WCR-1166DS[1]. But the patch was not inherited to the later version of the kernel and deleted by the above commit, then, the custom magic number support was broken. [1]: https://github.com/openwrt/openwrt/blob/05d6e92594c507dcd1f4be6c1bcb2282fe1abe1f/target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch#L27 log (factory image): [ 1.165312] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 1.195782] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 1.205353] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.217938] Creating 7 MTD partitions on "spi0.0": [ 1.227436] 0x000000000000-0x000000030000 : "u-boot" [ 1.238427] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.250123] 0x000000040000-0x000000050000 : "factory" [ 1.261306] 0x000000050000-0x000000810000 : "firmware" [ 1.282051] 0x000000810000-0x000000fd0000 : "firmware2" [ 1.293594] 0x000000fd0000-0x000000fe0000 : "glbcfg" [ 1.304719] 0x000000fe0000-0x000000ff0000 : "board_data" ... [ 1.452424] /dev/root: Can't open blockdev [ 1.460619] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.475434] Please append a correct "root=" boot option; here are the available partitions: [ 1.491986] 1f00 192 mtdblock0 [ 1.491989] (driver?) [ 1.504938] 1f01 64 mtdblock1 [ 1.504941] (driver?) [ 1.517885] 1f02 64 mtdblock2 [ 1.517888] (driver?) [ 1.530831] 1f03 7936 mtdblock3 [ 1.530834] (driver?) [ 1.543777] 1f04 7936 mtdblock4 [ 1.543781] (driver?) [ 1.556724] 1f05 64 mtdblock5 [ 1.556727] (driver?) [ 1.569672] 1f06 64 mtdblock6 [ 1.569675] (driver?) [ 1.582617] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.598976] Rebooting in 1 seconds.. This patch fixes this issue by using parser_trx with specifying custom magic number in dts instead of mtdsplit_trx. log (fixed factory image): [ 1.202044] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 1.225369] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 1.235015] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.247603] Creating 7 MTD partitions on "spi0.0": [ 1.257106] 0x000000000000-0x000000030000 : "u-boot" [ 1.269447] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.281192] 0x000000040000-0x000000050000 : "factory" [ 1.294208] 0x000000050000-0x000000810000 : "firmware" [ 1.305774] 2 trx partitions found on MTD device firmware [ 1.316540] Creating 2 MTD partitions on "firmware": [ 1.326399] 0x00000000001c-0x000000214754 : "linux" [ 1.336063] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only [ 1.357070] 0x000000214754-0x0000007c0000 : "rootfs" [ 1.366994] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 1.386368] mtd: device 5 (rootfs) set to be root filesystem [ 1.398700] 1 squashfs-split partitions found on MTD device rootfs [ 1.411027] 0x000000520000-0x0000007c0000 : "rootfs_data" [ 1.422841] 0x000000810000-0x000000fd0000 : "firmware2" [ 1.436282] 0x000000fd0000-0x000000fe0000 : "glbcfg" [ 1.447408] 0x000000fe0000-0x000000ff0000 : "board_data" ... [ 1.611216] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: switch parser of trx for mt76x8 subtargetINAGAKI Hiroshi2022-03-061-1/+1
| | | | | | | | | | This patch enable parser_trx and disable mtdsplit_trx for mt76x8 subtarget. The trx format is used only on Buffalo WCR-1166DS in mt76x8 subtarget and the parser need to be switched to parser_trx to use the custom magic number in the header for WCR-1166DS. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 01:45:43 +0000