aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* busybox: enable find -newer needed for shorewall firewall, no size increase ↵Lucian Cristian2017-12-142-2/+2
| | | | | | on binary Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* firmware-utils: mktplinkfw: fix JFFS2 EOF markersSergey Ryazanov2017-12-141-1/+1
| | | | | | | | | | | | | | | | | | | | | mktplinkfw/mktplinkfw2 utilities put JFFS2 EOF market only at 64KB boundary, this could lead to current device configuration lost during the sysupgrade on a device, which is equpped with flash with the 4KB erase block size (e.g. TP-Link Archer C20). This happens when 64KB and 4KB alignments do not match, so the JFFS2 data is written not exactly at the partition beginnig and startup scripts can not find the JFFS2 during the first boot just after the sysupgrade. Fix this by placing additional JFFS2 EOF marker at a 4KB boundary. Also keep the marker at 64KB intact, so the utilities will produce images suitable for devices with both 4KB and 64KB erase blocks. Fixes: 29a2c2ea80441895a2ffe100d854d2b26d5fa606 (add ability to put jffs2 eof marker into the image) Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493GJoão Chaínho2017-12-141-4/+4
| | | | | | | This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
* base-files: fix sysupgrade -b/-l when -c is usedLuiz Angelo Daros de Luca2017-12-141-10/+11
| | | | | | | | | | | | | Since /overlay/upper appeared, -b ignored -c silently (cause it was still checking for /overlay/etc). Now, if /overlay/upper is absent, sysupgrade -c will fail and exit verbosely. Fix -l to consider -c (it never did). Clean up to always use /overlay/upper/xxx instead of still checking for /overlay/xxx. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* apm821xx: use x86's upgrade scripts for MyBook LiveChristian Lamparter2017-12-142-19/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | Advantages: - preserves existing partition layout. On the hard-drive. Only the boot and rootfs partition will be overwritten. Disadvantages: - The upgrade process takes much longer to run. from 2-3 seconds to 15-25 seconds. Please note that sysupgrade will refuse to upgrade, if the existing installation has an incompatible partition layout. Future changes to the bootfs and/or rootfs partition size will likely cause breakage to the sysupgrade procedure. In these cases, the ext4-rootfs.img.gz has to be written manually onto the disk. Please don't forget to backup your configuration in this cases. Note2: This patch requires "base-files: upgrade: make get_partitions() endian agnostic" Note3: If your current installation does not host the two changes, sysupgrading will wipe the existing partition layout. Don't forget to backup your data! Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* e2fsprogs: Update to 1.43.7Rosen Penev2017-12-141-2/+2
| | | | | | Compiled and tested on ramips with no noticeable problems. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* apm821xx: MyBook Live convert to DT PHYChristian Lamparter2017-12-142-0/+12
| | | | | | Changes MyBook Live to use DT PHY probing and the broadcom phy driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: convert to dt based diag LED scriptChristian Lamparter2017-12-145-31/+49
| | | | | | | | | | | Please note that users with a Netgear WNDR4700 will need to update the device-tree partition manually. For instructions, please refere to commit 49856a4bb581 ("apm821xx: make it possible to update the dtb partition on the WNDR4700") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: unify get_dt_led helper functionChristian Lamparter2017-12-146-40/+26
| | | | | | | | | | | | | | Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* brcm63xx: fix an OOPS when accessing the basemode register on 6368Jonas Gorski2017-12-131-1/+1
| | | | | | | | | | The bcm6368 pinctrl driver passed the wrong variable to devm_regmap_field_alloc, causing it to blow up when later trying to access the field. Fixes #1211. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* base-files: make including distfeeds.conf optionalJonas Gorski2017-12-131-3/+5
| | | | | | | | | | | To not clutter the system when building an opkg free image, generate the distfeeds.conf only if CLEAN_IPKG is unset. Since opkg is now a shared package, we can't rely on PACKAGE_opkg, but since opkg is not reasonably usable without the status information, we can tie the distfeeds.conf to it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* base-files: create /etc/opkg before generating distfeeds.confJonas Gorski2017-12-131-0/+1
| | | | | | | | Ensure /etc/opkg exists before trying to write there. This fixes a build failure if SIGNED_PACKAGES is disabled. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* package: move distfeeds.conf from opkg to base-filesJonas Gorski2017-12-132-14/+12
| | | | | | | | | | | All the relevant options used for distfeeds.conf are part of base-files, so it makes more sense to move the file there as well. This has the added benefit that the we can share the opkg package again, reducing the amount of target specific packages. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ar71xx: fix lzma-loader build with glibcJonas Gorski2017-12-131-1/+1
| | | | | | | | | | | | | | | | For an unknown reason gcc tries to link in crti.o when building with a glibc toolchain (this does not happen with other targets). Prevent this by telling gcc explicitly to not do that. Fixes the following build error: /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x18): relocation truncated to fit: R_MIPS_GOT16 against `__gmon_start__' /home/jonas/git/lede/staging_dir/toolchain-mips_24kc_gcc-5.5.0_glibc/lib/gcc/mips-openwrt-linux-gnu/5.5.0/../../../../mips-openwrt-linux-gnu/lib/crti.o: In function `_init': (.init+0x28): relocation truncated to fit: R_MIPS_CALL16 against `__gmon_start__' collect2: error: ld returned 1 exit status Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* wireguard: bump to 20171211Kevin Darbyshire-Bryant2017-12-122-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump to latest WireGuard snapshot release: 44f8e4d version: bump snapshot bbe2f94 chacha20poly1305: wire up avx512vl for skylake-x 679e53a chacha20: avx512vl implementation 10b1232 poly1305: fix avx512f alignment bug 5fce163 chacha20poly1305: cleaner generic code 63a0031 blake2s-x86_64: fix spacing d2e13a8 global: add SPDX tags to all files d94f3dc chacha20-arm: fix with clang -fno-integrated-as. 3004f6b poly1305: update x86-64 kernel to AVX512F only d452d86 tools: no need to put this on the stack 0ff098f tools: remove undocumented unused syntax b1aa43c contrib: keygen-html for generating keys in the browser e35e45a kernel-tree: jury rig is the more common spelling 210845c netlink: rename symbol to avoid clashes fcf568e device: clear last handshake timer on ifdown d698467 compat: fix 3.10 backport 5342867 device: do not clear keys during sleep on Android 88624d4 curve25519: explictly depend on AS_AVX c45ed55 compat: support RAP in assembly 7f29cf9 curve25519: modularize dispatch Refresh patches. Compile-test-for: ar71xx Run-tested-on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dropbear: disable MD5 HMAC and switch to sha1 fingerprintsMartin Schiller2017-12-122-3/+5
| | | | | | | | | | | | As MD5 is known weak for many years and more and more penetration test tools complain about enabled MD5 HMAC I think it's time to drop it. By disabling the MD5 HMAC support dropbear will also automatically use SHA1 for fingerprints. This shouldn't be a problem too. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* treewide: add only one device when appending to TARGET_DEVICESLuis Araneda2017-12-1210-50/+216
| | | | | | | | | This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
* rules.mk: export TMPDIRJo-Philipp Wich2017-12-121-0/+1
| | | | | | | | Set TMPDIR to the same value as the existing TMP_DIR variable in order to let gcc and various other utilities use the local temporary directory instead of the system-wide one. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wolfssl: update to 3.12.2 (1 CVE)Jo-Philipp Wich2017-12-123-5/+147
| | | | | | | | | | Update wolfssl to the latest release v3.12.2 and backport an upstream pending fix for CVE-2017-13099 ("ROBOT vulnerability"). Ref: https://github.com/wolfSSL/wolfssl/pull/1229 Ref: https://robotattack.org/ Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: allow PKG_PREPARED_DEPENDS and PKG_CONFIG_DEPENDS to be changed after ↵Felix Fietkau2017-12-122-3/+6
| | | | | | | | | including package.mk Reverts commit a9c96ef0ac7ac99e4928f5312f3d0d1252c98328 and replaces it with a different approach Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: update to version 10.3.4.0 / 2017-11-29Kabuli Chana2017-12-121-3/+3
| | | | | | Improves stability on WRT3200ACM Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* ar71xx: fix board detection with newer RouterBOOT versionsGabor Juhos2017-12-122-0/+86
| | | | | | | | | | | | | | | Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD) use "Board=" kernel parameter instead of "board=" to pass the board name to the kernel. Due to this change the board detection code is not working on the devices shipped with the new RouterBOOT version. Because the kernel is unable to identify these boards they become unusable despite that they are supported by the current code. Update the prom_init code to convert the 'Board' kernel parameter to 'board'. After this change, the board detection works also with the new RouterBOOT versions. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* brcm47xx: remove versions from linksys-e1000 targetMoritz Warning2017-12-111-2/+2
| | | | | | | | | | The target name does not need to included a revision if all revisions are supported. This target supports all revisions (v1, v2, v2.1). Signed-off-by: Moritz Warning <moritzwarning@web.de> [Keep the version numbers in the device title, it doesn't harm] Signed-off-by: Mathias Kresin <dev@kresin.me>
* brcm47xx: use proper region code in image nameMoritz Warning2017-12-111-9/+9
| | | | | | | Replace 'north-america' by 'na' and remove 'other-regions' in image files for Netgear WGR614 v10. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* lantiq: dgn3500 drop worldwide suffixMathias Kresin2017-12-111-6/+6
| | | | | | | | | | Remove the WW suffix, everything without a region suffix is world wide anyway. While at it, normalise the image filenames by using only lower case characters. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: fix spelling in CONFIG_DEVTMPFS help textSascha Paunovic2017-12-111-1/+1
| | | | | | Change "ti" to "to", as that's the correct spelling. Signed-off-by: Sascha Paunovic <azarus@posteo.net>
* lantiq: nand: drop ubifs imagesMathias Kresin2017-12-112-2/+2
| | | | | | | | | | | | | | | Users are confused which image type they should use and there are more drawbacks than adavantages in using a r/w ubifs rootfs in constrast to a read-only squashfs rootfs like: - less available free flash space due to better compression of squashfs images - no support for factory reset due to r/w filesystem - possibility to break failsafe due to r/w filesystem Therefore, drop support for r/w ubifs rootfs images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: add DHCP build switch support in full variantHans Dedecker2017-12-101-5/+10
| | | | | | | | Add config option which allows to enable/disable DHCP support at compile time. Make DHCPv6 support dependant on DHCP support as DHCPv6 support implies having DHCP support. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* busybox: fix glibc libresolv dependency for LEDE nslook appletJo-Philipp Wich2017-12-101-1/+1
| | | | | | | Fixes d1ba483472 merge: busybox: update CONFIG_NSLOOKUP in busybox config. Fixes FS#1212. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: remove remaining uses of %N, and drop VERSION_NICK config symbolMatthias Schiffer2017-12-092-10/+3
| | | | | | Fixes d23e1e1e1a "merge: properly remove %n / %N references" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* merge: properly remove %n / %N referencesJo-Philipp Wich2017-12-093-7/+4
| | | | | | | | | | - use %d instead of %n for opkg feed identifiers - remove %n / %N references from version files Fixes bf5cef47b3 merge: release/banner: drop release name and update banner. Fixes FS#1213. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix a typo in 02_networkPavel Kubelun2017-12-081-1/+1
| | | | | | | The typo in network defaults script in ramips target that prevents defaults to initialize. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* netifd: always send DHCPv4 hostnameMathias Kresin2017-12-081-0/+1
| | | | | | | | | | | udhcpc doesn't send a hostname by default. Use the system hostname if nothing else is specified, to always send a hostname. It syncs the behaviour to odhcpc, which always sends a hostname. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* procd: nand: remove nand_board_name platform overrideMathias Kresin2017-12-081-9/+0
| | | | | | It isn't uses anymore by any target. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: remove nand_board_name platform overrideMathias Kresin2017-12-081-9/+0
| | | | | | | The boardname isn't used any longer to find the subdirectory in the sysupgrade tar archive, which makes this override useless. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: nand: dont rely on boardname in nand_upgrade_tarMathias Kresin2017-12-081-7/+9
| | | | | | | | | | | | | | | | Kernel and rootfs in a subdirectory matching the userspace boardname, was intended to use a single sysupgrade-tar archive for multiple boards with different kernel/rootfs images. This feature was never used. Use the first found directory in the tar archive instead of relying on a directory named according to the userspace boardname. It allows to change the boardname without adding another compatibility layer - using the nand_board_name() function - for (sub)targets using the metadata based image validation in favour to nand_do_platform_check(). Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: MIPS compile out no-op DMA mapping ops where possibleFelix Fietkau2017-12-083-1/+173
| | | | | | Slightly improves networking throughput on some devices Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ag71xx: Reduce NAPI weight to 32.Rosen Penev2017-12-081-1/+6
| | | | | | | | | | | | | | Qualcomm claims this reduces cache misses. Original commit message below: From: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Date: Tue, 11 Jun 2013 12:18:46 -0500 Subject: [ag71xx] reduce NAPI weight In an attempt to increase our cache warmth, we are decreasing NAPI. This increases the warmth of the reused SKBs. Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Revert "ag71xx: Switch from driver to kernel macro for NAPI_WEIGHT."Rosen Penev2017-12-083-6/+7
| | | | | | The motivation for this was misguided. It turns out tuning the NAPI weight could be useful for testing purposes. Therefore reverting. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain: musl: update to current HEADChristian Lamparter2017-12-082-21/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 72656157 fix fgetwc when decoding a character that crosses buffer boundary a223dbd2 add reverse iconv mappings for JIS-based encodings 105eff9d generalize iconv framework for 8-bit codepages a71b46cf fix malloc state corruption when ldso rejects loading a second libc d060edf6 reformat cjk iconv tables to be diff-friendly, match tool output c21051e9 prevent fork's errno from being clobbered by atfork handlers a39f20bf add iso-2022-jp support (decoding only) to iconv 5b546faa add iconv framework for decoding stateful encodings 0df5b39a simplify/optimize iconv utf-8 case 9eb6dd51 handle ascii range individually in each iconv case bff59d13 move iconv_close to its own translation unit 79f49eff refactor iconv conversion descriptor encoding/decoding 30fdda6c fix getaddrinfo error code for non-numeric service with AI_NUMERICSERV 67b29947 fix mismatched type of __pthread_tsd_run_dtors weak definition 13935337 s390x: use generic ioctl.h 4dc44ce8 microblaze: add statx syscall from linux v4.13 ffd048a0 aarch64: add extra_context struct from linux v4.13 6651ef1f add new tcp.h socket options from linux v4.13 14ced228 add new fcntl.h macros from linux v4.13 754f66af ioctl TIOCGPTPEER from linux v4.13 c35a8bf4 add SO_ getsockopt options from linux v4.13 5daaed6a s390x: add syscall number for s390_guarded_storage from linux v4.12 2dc6760f i386: add arch_prctl syscall number from linux v4.12 840d45be aarch64: add new HWCAP_* flags from linux v4.12 4c811227 add ARPHDR_VSOCKMON from linux v4.12 54f04d99 add new SO_ socket options from linux v4.12 9864f60e add statx syscall numbers from linux v4.11 c519658c add TCP_NLA_* enums from linux v4.11 ee3ae782 add TCP_FASTOPEN_CONNECT tcp socket option from linux v4.11 3eb82f73 add ETH_P_IBOE from linux v4.11 bd1560f6 update aarch64 hwcap.h for linux v4.11 cee73f0c add kexec_file_load syscall number on powerpc from linux v4.10 8f569557 add microblaze syscall numbers from linux v4.10 d8004030 add TFD_TIMER_CANCEL_ON_SET that timerfd.h was missing f5638c22 add ETH_MIN_MTU and ETH_MAX_MTU from linux v4.10 01369691 add IP_RECVFRAGSIZE and IPV6_RECVFRAGSIZE from linux v4.10 5c596ed8 add SCM_TIMESTAMPING_OPT_STATS and related TCP_ enums from linux v4.10 6fc6ca1a adjust posix_spawn dup2 action behavior to match future requirements Cc: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: upgrade: make get_partitions() endian agnosticChristian Lamparter2017-12-081-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two issues with the current get_partitions() function. First: "Invalid partition table on $disk" will pop up on legitimate images on big endian system. This is because the little-endian representation of "55 AA" is assumed in the context of little-endian architectures. On these comparing it to the 16-bit word 0xAA55 does work as intented. Whereas on big-endian systems, this would have to be 0x55AA. This patch fixes the issue by replacing the integer conversion and value match check with just a string comparision. Second: The extraction of the type, start LBA and LBA num from the partition table has the same endianness issue. This has been fixed by using the new hex_le32_to_cpu() function. This function will translate the stored little-endian data to the correct byte-order if necessary. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA4019 firmware to 10.4-3.2.1-00058Christian Lamparter2017-12-081-4/+4
| | | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.4-3.2.1-00058 firmware for the QCA4019. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* merge: etc: update remaining filesZoltan HERPAI2017-12-084-4/+4
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: uhttpd: update cert generation to match system defaultsZoltan HERPAI2017-12-081-1/+1
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: busybox: update CONFIG_NSLOOKUP in busybox config and respective patchZoltan HERPAI2017-12-083-16/+16
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: packages: update branding in core packagesZoltan HERPAI2017-12-087-10/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: ssid: update default ssidZoltan HERPAI2017-12-084-5/+5
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: targets: update image generation and targetsZoltan HERPAI2017-12-0822-48/+49
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: release/banner: drop release name and update bannerZoltan HERPAI2017-12-082-20/+10
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: base: update base-files and basic configZoltan HERPAI2017-12-0810-19/+19
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 21:21:30 +0000