aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools: zip: make encrypted archives reproducibleSungbo Eo2022-03-091-0/+75
| | | | | | | | | | | Zip always try to generate new encryption header depending on execution time and process id, which is far from being reproducible. This commit changes the zip srand() seed to a predictable value to generate reproducible random bytes for the encryption header. This will compromise the goal of secure archive encryption, but it would not be a big problem for our purpose. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* tools: zip: fetch SOURCE_DATE_EPOCH directlySungbo Eo2022-03-093-146/+41
| | | | | | | | | Remove "--mtime" option introduced in commit 18c9faa03211 ("tools: zip: add option for reproducible archives") and instead fetch SOURCE_DATE_EPOCH environment variable directly in the code. Ref: https://sourceforge.net/p/infozip/patches/25/ Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: use UTC for zip timestampSungbo Eo2022-03-091-2/+1
| | | | | | | | Zip uses DOS timestamp for mtime which is stored in local time and hence depends on the timezone of the build system. Force zip to use UTC timezone to make image builds more reproducible. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for Renkforce WS-WN530HP3-ABirger Koblitz2022-03-083-0/+171
| | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Renkforce WS-WN530HP3-A ceiling- mountable Wireless Access Point, which is powered over PoE. Hardware: - SoC: Mediatek MT7621DAT - RAM: 128MiB on SoC - Flash: 16MiB GigaDevice GD25Q128C - 2.4Ghz Wifi: Mediatek MT603EN - 5GHz Wifi: MT613BEN - Ethernet: - 1x 1GBit WAN port, passive PoE capable - 2x 1GBit LAN ports LEDs: 1x Bi-Color LED (red/blue) Buttons: 1x Reset Button, 1x Power Button Installation: Power on the access point and immedately press the reset button for 10 seconds. Connect web-browser to 192.168.10.1 and upload sysupgrade image. Flash uploaded image and wait about 2 minutes for reboot. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixed SoB]
* ath79: fix button labels for WZR-HP-AG300H and WZR-600DHPJeffery To2022-03-081-0/+6
| | | | | | | | These were present in ar71xx but overlooked when porting to ath79. Fixes: 480bf2827392 ("ath79: add support for Buffalo WZR-HP-AG300H") Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* ath79: add support for MikroTik RouterBOARD mAP liteThibaut VARÈNE2022-03-085-1/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. See https://mikrotik.com/product/RBmAPL-2nD for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in - 4 user-controllable LEDs: · 1x power (green) · 1x user (green) · 1x lan (green) · 1x wlan (green) Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq806x: provide ramoops for R7800/XR500 by defaultHannu Nyman2022-03-081-2/+2
| | | | | | | | | | | | | Add kmod-ramoops to the default set of device packages in R7800 and XR500, so that the ramoops kernel crash logs are provided by default for these routers. The capability was earlier defined by 97158fe1 and cf346dfa, but the feature was not yet turned on by default. The possible kernel crashes are stored into /sys/fs/pstore/* Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ath79: Add green power LED to Airtight C-75Sven Schwermer2022-03-081-7/+15
| | | | | | | In addition to the missing green LED definition, the polarity of the amber power LED was incorrect which is fixed here. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* lantiq: xrx200: fix use after free bugAleksander Jan Bajkowski2022-03-084-0/+30
| | | | | | | The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* uboot-envtools: add support for I-O DATA BSH-G24MBINAGAKI Hiroshi2022-03-071-0/+8
| | | | | | | This patch adds the device-specific configuration to u-boot-envtools for I-O DATA BSH-G24MB switch. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: add support for I-O DATA BSH-G24MBINAGAKI Hiroshi2022-03-072-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA BSH-G24MB is a 24 port gigabit switch, based on RTL8382M. Specification: - SoC : Realtek RTL8382M - RAM : DDR2 128 MiB (Nanya NT5TU128M8HE-AC) - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FM2I-10G) - Ethernet : 10/100/1000 Mbps x24 - port 1-8 : RTL8218B - port 9-16 : RTL8218B (SoC) - port 17-24 : RTL8218B - LEDs/Keys : 2x, 1x - UART : pin header on PCB - JP2: 3.3V, TX, RX, GND from rear side - 115200n8 - Power : 100 VAC, 50/60 Hz - Plug : IEC 60320-C13 Flash instruction using sysupgrade image: 1. Boot BSH-G24MB normally 2. Connect BSH-G24MB to the DHCP enabled network 3. Find the device's IP address and open the WebUI and login Note: by default, the device obtains IP address from DHCP server of the network 4. Open firmware update page ("ファームウェア アップデート") 5. Rename the OpenWrt sysupgrade image to "bsh-g24mb_v100.image" and select it 6. Press apply ("適用") button to perform update 7. Wait ~150 seconds to complete flashing Note: - BSH-G24MB has a power-related LED ("電源"), but it's not connected to the GPIO of the SoC or RTL8231 and cannot be controlled. Instead of it, use system status LED on other than running-state. - "sys_loop" LED indicates system status and loop-detection status in stock firmware. - BSH-G24MB has 2x os-image partitions named as "RUNTIME"/"RUNTIME2" in 16 MiB SPI-NOR flash and the size of image per partition is only 6848 KiB. The secondary image is never used on stock firmware, so also use it on OpenWrt to get more space. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* nftables: update to version 1.0.2Josef Schlehofer2022-03-073-47/+32
| | | | | | | | | | | | | | | | | | | | | | | | | Changelog: https://lwn.net/ml/netdev/YhO5Pn+6+dgAgSd9@salvia/ Patches: removed: - 001-parser-allow-quoted-string-in-flowtable_expr_member: it is now part of upstream release [1] added: - 001-examples-compile-with-make-check.patch: backported from [2], it fixes: nft-json-file.c:3:10: fatal error: nftables/libnftables.h: No such file or directory 3 | #include <nftables/libnftables.h> | ^~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. [1] https://git.netfilter.org/nftables/commit/?h=v1.0.2&id=07af4429241c9832a613cb8620331ac54257d9df [2] https://git.netfilter.org/nftables/commit/?id=18a08fb7f0443f8bde83393bd6f69e23a04246b3 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* linux-firmware: Update to version 20220209Hauke Mehrtens2022-03-072-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This switches the iwlwifi-firmware-ax200 file to API version 66, this is the most recent version supported by our driver. The following files used in OpenWrt changed: amdgpu-firmware/lib/firmware/amdgpu/yellow_carp_dmcub.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010b.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_0303.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010b.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_0303.bin ar3k-firmware/lib/firmware/qca/rampatch_usb_00130200.bin ar3k-firmware/lib/firmware/qca/rampatch_usb_00130201.bin iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-66.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0-66.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-iwl9000/lib/firmware/iwlwifi-9000-pu-b0-jf-b0-46.ucode iwlwifi-firmware-iwl9260/lib/firmware/iwlwifi-9260-th-b0-jf-b0-46.ucode rtl8822ce-firmware/lib/firmware/rtw88/rtw8822c_fw.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm4908: fix init on CFE devicesRafał Miłecki2022-03-071-1/+1
| | | | | | | exit in preinit script was stopping whole process Fixes: 93259e8ca261 ("bcm4908: support "rootfs_data" on U-Boot devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bpf-headers: ship a modified version of stdarg.h from musl to fix ebpf build ↵Felix Fietkau2022-03-072-0/+22
| | | | | | on glibc Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/binutils: remove old versionsFelix Fietkau2022-03-0715-362/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: update to the latest versionFelix Fietkau2022-03-061-3/+3
| | | | | | | | | | | 3276aed81c73 move run_cmd() to main.c 558eabc13c64 map: move dns host based lookup code to a separate function 6ff06d66c36c dns: add code for snooping dns packets a78bd43c4a54 ubus: remove dnsmasq subscriber 9773ffa70f1f map: process dns patterns in the order in which they were defined f13b67c9a786 dns: allow limiting dns entry matching to cname name Signed-off-by: Felix Fietkau <nbd@nbd.name>
* realtek: net: dsa: configure better brport flags when ports leave the bridgeBjørn Mork2022-03-061-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensures that the DSA driver sets exactly the same default flags as the bridge when a port joins or leaves. Without this we end up with a confusing flag mismatch, where DSA and bridge ports use different sets of flags. This is critical as the "learning" mismatch will be harmful to the network, causing all traffic to be flooded on all ports. The original commit was buggy, trying to set the flags one-by-one in a loop. This was not supported by the API and the end result was that all but the last flag were cleared. This bug was implicitly fixed upstream by commit e18f4c18ab5b ("net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes"). This is a minimum temporary stop measure fix for the critical lack of "learning" only. The major API change associated with a full v5.12+ backport is neither required nor wanted. A simpler fix, moving the call to dsa_port_bridge_flags() out of the loop, has therefore been merged into this modified backport. Fixes: afa3ab54c03d ("realtek: Backport bridge configuration for DSA") Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> [fix typos in commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: use parser_trx for Buffalo WCR-1166DSINAGAKI Hiroshi2022-03-062-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WCR-1166DS uses trx-fomatted firmware and the custom magic number (0x5C436F74, "\Cot") is required for OpenWrt installation from OEM WebUI. But the current mtdsplit_trx doesn't support the custom magic number and fail to parse and split to kernel and rootfs when the factory image is flashed. Then, the kernel fails to mount rootfs automatically and panics. Before the commit fddc78bc116bc043fb5cd92dbc45cfd054c21af8, mtdsplit_trx was patched in ramips target and the device-specific magic number was supported only for WCR-1166DS[1]. But the patch was not inherited to the later version of the kernel and deleted by the above commit, then, the custom magic number support was broken. [1]: https://github.com/openwrt/openwrt/blob/05d6e92594c507dcd1f4be6c1bcb2282fe1abe1f/target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch#L27 log (factory image): [ 1.165312] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 1.195782] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 1.205353] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.217938] Creating 7 MTD partitions on "spi0.0": [ 1.227436] 0x000000000000-0x000000030000 : "u-boot" [ 1.238427] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.250123] 0x000000040000-0x000000050000 : "factory" [ 1.261306] 0x000000050000-0x000000810000 : "firmware" [ 1.282051] 0x000000810000-0x000000fd0000 : "firmware2" [ 1.293594] 0x000000fd0000-0x000000fe0000 : "glbcfg" [ 1.304719] 0x000000fe0000-0x000000ff0000 : "board_data" ... [ 1.452424] /dev/root: Can't open blockdev [ 1.460619] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.475434] Please append a correct "root=" boot option; here are the available partitions: [ 1.491986] 1f00 192 mtdblock0 [ 1.491989] (driver?) [ 1.504938] 1f01 64 mtdblock1 [ 1.504941] (driver?) [ 1.517885] 1f02 64 mtdblock2 [ 1.517888] (driver?) [ 1.530831] 1f03 7936 mtdblock3 [ 1.530834] (driver?) [ 1.543777] 1f04 7936 mtdblock4 [ 1.543781] (driver?) [ 1.556724] 1f05 64 mtdblock5 [ 1.556727] (driver?) [ 1.569672] 1f06 64 mtdblock6 [ 1.569675] (driver?) [ 1.582617] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.598976] Rebooting in 1 seconds.. This patch fixes this issue by using parser_trx with specifying custom magic number in dts instead of mtdsplit_trx. log (fixed factory image): [ 1.202044] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 1.225369] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 1.235015] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.247603] Creating 7 MTD partitions on "spi0.0": [ 1.257106] 0x000000000000-0x000000030000 : "u-boot" [ 1.269447] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.281192] 0x000000040000-0x000000050000 : "factory" [ 1.294208] 0x000000050000-0x000000810000 : "firmware" [ 1.305774] 2 trx partitions found on MTD device firmware [ 1.316540] Creating 2 MTD partitions on "firmware": [ 1.326399] 0x00000000001c-0x000000214754 : "linux" [ 1.336063] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only [ 1.357070] 0x000000214754-0x0000007c0000 : "rootfs" [ 1.366994] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 1.386368] mtd: device 5 (rootfs) set to be root filesystem [ 1.398700] 1 squashfs-split partitions found on MTD device rootfs [ 1.411027] 0x000000520000-0x0000007c0000 : "rootfs_data" [ 1.422841] 0x000000810000-0x000000fd0000 : "firmware2" [ 1.436282] 0x000000fd0000-0x000000fe0000 : "glbcfg" [ 1.447408] 0x000000fe0000-0x000000ff0000 : "board_data" ... [ 1.611216] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: switch parser of trx for mt76x8 subtargetINAGAKI Hiroshi2022-03-061-1/+1
| | | | | | | | | | This patch enable parser_trx and disable mtdsplit_trx for mt76x8 subtarget. The trx format is used only on Buffalo WCR-1166DS in mt76x8 subtarget and the parser need to be switched to parser_trx to use the custom magic number in the header for WCR-1166DS. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: backport patch to allow using parser_trx from ramipsINAGAKI Hiroshi2022-03-061-0/+33
| | | | | | | This patch adds a patch to allow using parser_trx from ramips target, mainly for Buffalo devices. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-065-4/+5
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: update MAC address configuration for Buffalo WCR-1166DSINAGAKI Hiroshi2022-03-061-2/+2
| | | | | | | | This patch converts MAC address configuration of Buffalo WCR-1166DS in 02_network to use the generic function of OpenWrt. And also, add label_mac. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: increase spi frequency for Buffalo WCR-1166DSINAGAKI Hiroshi2022-03-061-1/+1
| | | | | | | Use higher frequency than current and up the speed to access to the flash on WCR-1166DS. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: Add support for TP-Link TL-WPA8631P v3Joe Mullally2022-03-064-0/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AV1300 Gigabit Passthrough Powerline ac Wi-Fi Extender Specifications -------------- * SoC: MediaTek MT7621AT * CPU: 880 MHz MIPS 1004KEc dual-core CPU * RAM: 64 MiB DDR2 (Zentel A3R12E40DBF-8E) * Flash: 8 MiB SPI NOR (GigaDevice GD25Q64CSIG) * Ethernet: SoC built-in Switch 5x 1GbE * Port 0: PLC (connected through AR8035-A) * Port 1-3: LAN * WLAN: 2x2 2.4GHz 300 Mbps + 2x2 5GHz 867 Mbps (MT7603EN + MT7613BEN) * PLC: HomePlug AV2 (Qualcomm QCA7500) * PLC Flash: 2MiB SPI NOR (GigaDevice GD25Q16CSIG) * Buttons: Reset, LED, Pair, Wi-Fi * LEDs: Power (green), PLC (green/amber), LAN (green), 2.4G (green), 5G (green) * UART: J1 (57600 baud) * Pinout: (3V3) (GND) (RX) (TX) * Visually identify GND from connection to PCB ground plane Installation ------------ Installation is possible from the OEM web interface. Make sure to install the latest OEM firmware first, so that the PLC firmware is at the latest version. However, please first check the OpenWRT Wiki page for confirmation that your OEM firmware version is supported. Signed-off-by: Joe Mullally <jwmullally@gmail.com>
* iproute2: Remove libxtables from some tc variantsHauke Mehrtens2022-03-051-3/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new tc-bpf variant and removes libxtables dependency from the tc-tiny variant. The tc-full variant stays like before and contains everything. This allows to use tc without libxtables. The variants have the following sizes: root@OpenWrt:/# ls -al /usr/libexec/tc-* -rwxr-xr-x 1 root root 282453 Mar 1 21:55 /usr/libexec/tc-bpf -rwxr-xr-x 1 root root 282533 Mar 1 21:55 /usr/libexec/tc-full -rwxr-xr-x 1 root root 266037 Mar 1 21:55 /usr/libexec/tc-tiny They are linking the following shared libraries: root@OpenWrt:/# ldd /usr/libexec/tc-tiny /lib/ld-musl-mips-sf.so.1 (0x77d6e000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d4a000) libc.so => /lib/ld-musl-mips-sf.so.1 (0x77d6e000) root@OpenWrt:/# ldd /usr/libexec/tc-bpf /lib/ld-musl-mips-sf.so.1 (0x77da6000) libbpf.so.0 => /usr/lib/libbpf.so.0 (0x77d60000) libelf.so.1 => /usr/lib/libelf.so.1 (0x77d3e000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d1a000) libc.so => /lib/ld-musl-mips-sf.so.1 (0x77da6000) libz.so.1 => /usr/lib/libz.so.1 (0x77cf6000) root@OpenWrt:/# ldd /usr/libexec/tc-full /lib/ld-musl-mips-sf.so.1 (0x77de8000) libbpf.so.0 => /usr/lib/libbpf.so.0 (0x77da2000) libelf.so.1 => /usr/lib/libelf.so.1 (0x77d80000) libxtables.so.12 => /usr/lib/libxtables.so.12 (0x77d66000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77d42000) libc.so => /lib/ld-musl-mips-sf.so.1 (0x77de8000) libz.so.1 => /usr/lib/libz.so.1 (0x77d1e000) This is based on a patch from Tiago Gaspar. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: mt7622: add support for Ruijie RG-EW3200GX PROLanghua Ye2022-03-051-0/+3
| | | | | | | | Add U-Boot environment settings for Ruijie RG-EW3200GX PRO to allow users to access the bootloader environment using fw_printenv/fw_setenv while running OpenWrt. Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* mediatek: add support for Ruijie RG-EW3200GX PROLanghua Ye2022-03-054-1/+370
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X32 Pro is another product name for it in the Chinese market. Specifications: - SoC: MT7622B - RAM: 256MB - Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR - Ethernet: 5x1GbE - Switch: MT7531BE - WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN - 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) - 2Keys: Mesh button + Reset button - UART: Marked J19 on board. 3.3v, 115200n1 - Power: 12V 2.5A MAC addresses as verified by OEM firmware: use address source WAN *:F4 ethaddr@product_info LAN *:F5 5g *:F6 2g *:F7 Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: add support for XMC XM25QH128CLanghua Ye2022-03-051-0/+11
| | | | | | | The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO. Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* libnetfilter-conntrack: backport patch fixing compilation with 5.15Ansuel Smith2022-03-052-1/+50
| | | | | | Backport patch fixing compilation with 5.15 and musl provided by Robert Marko Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-05154-1537/+525
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* util-linux: add lsnsOskari Rauta2022-03-051-0/+16
| | | | | | lsns lists system namespaces Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* uboot-mvebu: backport patch to fix nvme detail crashJosef Schlehofer2022-03-051-0/+92
| | | | | | | | | | | | | | | | | | | | | Steps to reproduce: 1. Insert NVMe disk with a reduction to Turris Omnia 2. Go to U-boot 3. Run these two commands: a) ``nvme scan`` b) ``nvme detail`` 4. Wait for crash This is backported from U-boot upstream repository. It should be included in the upcoming release - 2022.04 [1]. It was tested on Turris Omnia, mvebu, cortex-a9, OpenWrt master. [1] https://patchwork.ozlabs.org/project/uboot/patch/20211209100639.21530-1-pali@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [Export the patch from U-Boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mkhash: fix build errors on FreeBSD 13.0Georgi Valkov2022-03-051-1/+1
| | | | | | | | | | | | | | be64enc, be16dec, and be32dec are declared on FreeBSD 13.0, in /usr/include/sys/endian.h so we should not declare them. Fixes the following error during feeds update: staging_dir/host/bin/mkhash: No such file or directory gcc scripts/mkhash.c scripts/mkhash.c:111:1: error: redefinition of 'be64enc' 111 | be64enc(void *buf, uint64_t u) Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
* tools/fakeroot: restore macos bugfix that was dropped during the last updateFelix Fietkau2022-03-051-0/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* qosify: bump to git HEADStijn Tintel2022-03-042-4/+4
| | | | | | | | interface: disable autorate-ingress by default Also change the example config to reflect this. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* qosify: add PKG_RELEASEStijn Tintel2022-03-041-0/+1
| | | | | | | | | Without PKG_RELEASE, it's impossible to trigger package updates when changing files included in the package that are not in the qosify git repository. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name>
* bcm4908: support "rootfs_data" on U-Boot devicesRafał Miłecki2022-03-043-13/+122
| | | | | | | | | | | | | | | | | | | | | | | | | 1. Create "rootfs_data" dynamicaly U-Boot firmware images can contain only 2 UBI volumes: bootfs (container with U-Boot + kernel + DTBs) and rootfs (e.g. squashfs). There is no way to include "rootfs_data" UBI volume or make firmware file tell U-Boot to create one. For that reason "rootfs_data" needs to be created dynamically. Use preinit script to handle that. Fire it right before "mount_root" one. 2. Relate "rootfs_data" to flashed firmware As already explained flashing new firmware with U-Boot will do nothing to the "rootfs_data". It could result in new firmware reusing old "rootfs_data" overlay UBI volume and its file. Users expect a clean state after flashing firmware (even if flashing the same one). Solve that by reading flash counter of running firmware and storing it in "rootfs_data" UBI volume. Every mismatch will result in wiping old data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: remove support for mounting /tmp in zramRui Salvaterra2022-03-031-10/+1
| | | | | | | | | | | | | | | | | The /tmp directory is mounted as tmpfs. The tmpfs filesystem is backed by anonymous memory, which means it can be swapped out at any time, if there is memory pressure [1]. For this reason, a zram swap device is a much better choice than mounting /tmp on zram, since it's able to compress all anonymous memory, and not just the memory assigned to /tmp. We already have the zram-swap package for this specific purpose, which means procd's tmp-on-zram is both redundant and more limited. A follow-up patch will remove support for mounting /tmp in zram from procd itself. [1] https://www.kernel.org/doc/Documentation/filesystems/tmpfs.txt Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: remove CONFIG_DEVTMPFS{,_MOUNT} from kconfigsRui Salvaterra2022-03-016-11/+0
| | | | | | They are required for container support, but are handled in Config-kernel.in. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: allocate last level PTEs in high memoryRui Salvaterra2022-03-017-7/+7
| | | | | | | | | | Enable support for allocating user space page table entries in high memory [1], for the targets which support this feature. This saves precious low memory (permanently mapped, the only type of memory directly accessible by the kernel). [1] https://www.kernel.org/doc/html/latest/vm/highmem.html Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-0119-92/+52
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-0141-188/+89
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: kmod-tcp-scalable: add scalable tcp congestion algorithmCatalin Toda2022-03-011-0/+18
| | | | Signed-off-by: Catalin Toda <catalinii@gmail.com>
* ipset: update to 7.15Florian Eckert2022-03-012-2/+14
| | | | | | | | | Update to the latest upstream version. In this version there is a new tool with which you can convert ipsets into nftables sets. Since we are now using nftables as default firewall, this could be a useful tool for porting ipsets to nftables sets. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* tools/libressl: update to version 3.4.2Josef Schlehofer2022-03-011-2/+2
| | | | | | | | | | | | | | | Release notes: https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.4.2-relnotes.txt ``` It includes the following security fix * In some situations the X.509 verifier would discard an error on an unverified certificate chain, resulting in an authentication bypass. Thanks to Ilya Shipitsin and Timo Steinlein for reporting. ``` Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* tools/mkimage: update to 2022.01Huangbin Zhan2022-03-013-17/+30
| | | | | | | | | | | | - enable dot config - enable openwrt verbose - add bison as dependency to avoid failure ``` bison -oscripts/kconfig/zconf.tab.c -t -l scripts/kconfig/zconf.y bison: /builder/shared-workdir/build/staging_dir/host/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory ``` Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* tools/fakeroot: update to 1.27Rosen Penev2022-03-015-134/+17
| | | | | | | | | | Remove macOS stuff. Upstream has fixed it in the same way. Add SOL_TCP define. Taken from elsewhere in the code. Refreshed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/expat: update to 2.4.6Rosen Penev2022-03-012-11/+16
| | | | | | | | | | | Switched to CMake for faster compilation and greater parallel friendliness. Added CMake options from the packages feed. This release fixes various CVEs. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/findutils: update to 4.9.0Rosen Penev2022-03-012-2/+22
| | | | | | | | Add compilation fix for Ubuntu 20.04. Provided by upstream maintainer: https://github.com/openwrt/packages/issues/17912#issuecomment-1046726426 Signed-off-by: Rosen Penev <rosenp@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 08:14:50 +0000