aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: 5.10: dsa: don't set skb->offload_fwd_mark when not offloading bridgeMatthew Hagan2021-10-071-0/+138
| | | | | | | | | | | Add Vladimir Oltean's "net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge" This covers cases where packets received by an upstream switch must be forwarded back on the same port, which skb->offload_fwd_mark normally prevents. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* Revert "swconfig: fix Broadcom b53 support"Rafał Miłecki2021-10-072-33/+0
| | | | | | | | | | | | | | | | | | | | This reverts commit 8f9cd1af0f9c325a902dbd0e79e12015372e6bb0. That commit was meant to add a single EXPORT_SYMBOL_GPL() but it actually also added few .of_match_table-s. One commit should handle one thing and should not introduce unrelated changes. Regarding actual changes: 1. EXPORT_SYMBOL_GPL is not required as we don't build swconfig drivers as modules. 2. PHY drivers must not have .of_match_table. That is allowed for MDIO drivers. This could work for some time (although is didn't for me on bcm53xx) but does not with kernel 5.10. It causes a soft lockup and upstream developers confirmed it's an unsupported design. Link: https://lore.kernel.org/netdev/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com/t/#mf80e472f35ee23f7a75cbf5b1e101a17ab3a64a3 Cc: Tobias Schramm <tobleminer@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport bgmac upstream commits from 5.15 / for 5.16Rafał Miłecki2021-10-075-2/+177
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mpc85xx: switch to Kernel 5.10Adrian Schmutzler2021-10-052-2/+2
| | | | | | | | This has testing support for 7 months. Time to switch. TL-WDR4900 is disabled due to kernel size limitation. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: 5.10: add missing symbolsPawel Dembicki2021-10-054-5/+4
| | | | | | | | | | | | Three missing symbols were found during mpc85xx/p2020 compilation. While at it, CONFIG_FSL_ENETC_MDIO is moved to generic config for consistency. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [move CONFIG_FSL_ENETC_MDIO, remove redundant definitions, adjust commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm27xx: remove obsolete kernel 5.4Adrian Schmutzler2021-10-051051-266922/+0
| | | | | | | With the upgrade to kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* firmware-utils: bump to git HEADKevin Darbyshire-Bryant2021-10-051-3/+3
| | | | | | | | f9ad6b3 Add more missing includes for byte swap operations Basically stop it exploding on MacOS Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: drop kmod-gpio-devStijn Tintel2021-10-051-16/+0
| | | | | | | The GPIO_DEVICE symbol belonged to a custom driver that was removed from OpenWrt in 2012. The symbol never existed in the upstream kernel. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: add RPI_AXIPERF symbolStijn Tintel2021-10-058-0/+8
| | | | | | | | When KERNEL_PERF_EVENTS is enabled in OpenWrt, or PERF_EVENTS in the kernel config, the RPI_AXIPERF is exposed. Add it to the subtarget kernel configs to avoid build failures. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: add SND_SOC_AD193X_{I2C,SPI} symbolsStijn Tintel2021-10-059-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building an image for the bcm27xx target, some combinations of config options will fail to build due the SND_SOC_AD193X_I2C and SND_SOC_AD193X_SPI kernel config symbols being missing. The problem only occurs on bcm27xx as the target contains a patch that modifies the Kconfig file containing the symbols; in the vanilla kernel, there is no string after the tristate keyword so the symbol is not exposed. The _I2C symbol depends on I2C, which is enabled in the kernel configs of all bcm27xx subtargets. The _SPI symbol depends on SPI_MASTER, which is exposed by either kmod-mmc-spi, kmod-spi-bitbang, kmod-spi-dev, kmod-spi-bcm2835 or kmod-spi-bcm2835-aux. Both symbols are defined in the sound/soc/codecs directory, which is only included when SND_SOC is enabled, so this problem doesn't occur when kmod-sound-soc-core is not enabled. As the kmod-sound-soc-bcm2835-i2s package disables the SND_SOC_AD193X_SPI symbol, it also doesn't occur when kmod-sound-soc-bcm2835-i2s is enabled. As there are several possible config combinations that do exhibit this problem, it is best to solve it by adding the missing symbols to the subtarget kernel configs. By doing this we can remove them from the kmod-sound-soc-bcm2835-i2s package. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* tools/cmake: update to 3.21.3Rosen Penev2021-10-051-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* tools/bison: update to 3.8.2Rosen Penev2021-10-051-2/+2
| | | | Signed-off-by: Rosen Penev <rosenp@gmail.com>
* busybox: update to 1.34.1Hannu Nyman2021-10-053-116/+2
| | | | | | | | | | | | Update busybox to version 1.34.1, which is a minor maintenance release. It contains just the two post-1.34.0 upstream patches that we earlier backported plus a few fixes to awk. * Remove the two backported upstream patches that are now unnecessary. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* firmware-utils: update to version 2021-10-05Petr Štetiar2021-10-05104-37775/+9
| | | | | | | | | | | | | | | | Includes following changes: db65821f006c cmake: fix missing install target 3a0cfc856991 Add initial GitLab CI support 8f47adea6f87 Add missing includes for byte swap operations fbafae9f8037 Convert to CMake based project Additionaly moves source code into separate Git project repository and converts the package build to utilize CMake. Signed-off-by: Petr Štetiar <ynezz@true.cz> [rmilecki: rebase, update to the latest repo git & rm -r src] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix USW-Flex reversed switch-port orderDavid Bauer2021-10-041-4/+4
| | | | | | | Switch port order was reversed due to reading the internal labling (which mismatches the one on the case). Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-mediatek: update to 2021.10Daniel Golle2021-10-0432-610/+77
| | | | | | | | | | | U-Boot 2021.10 has been released. Rebase mediatek patches on top of new release and remove some patches which have been merged upstream. Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and Linksys E8450 (mt7622). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add explicit "set:" for client-matching optionsPaul Fertser2021-10-031-6/+6
| | | | | | | | | Bring the usage in line with the dnsmasq man page and the other options where set: is mandatory. No functional change. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* build: fix `which` detection on Fedora & MacOSPaul Spooren2021-10-021-1/+3
| | | | | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Fixup of fca5ad55d2 prereq-build: fix `which` detection on Fedora Reported-by: Jani Partanen <rtfm@iki.fi> Suggest-by: Etienne Champetier <champetier.etienne@gmail.com> Tested-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: Deactivate some ARM64 errata workaroundsHauke Mehrtens2021-10-0317-61/+10
| | | | | | | | | | | This deactivates the following workarounds for erratas in ARM64 CPUS: CONFIG_ARM64_ERRATUM_1165522: Cortex-A76 cores (r0p0, r1p0, r2p0) CONFIG_ARM64_ERRATUM_1286807: Cortex-A76 cores (r0p0 to r3p0) CONFIG_ARM64_ERRATUM_1418040: Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) CONFIG_CAVIUM_TX2_ERRATUM_219: Cavium ThunderX2 CONFIG_FUJITSU_ERRATUM_010001: Fujitsu-A64FX Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Refresh kernel 5.10 configurationHauke Mehrtens2021-10-033-115/+18
| | | | | | | | The cortex53 subtarget was missing multiple config options and the other targets just defined some options which are not needed. Fixes: 83672f506d95 ("sunxi: add testing Linux 5.10") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Activate CONFIG_SATA_PMPHauke Mehrtens2021-10-031-0/+2
| | | | | | | | The kernel 5.4 configuration activated SATA Port Multiplier support, add it to kernel 5.10 too. Fixes: 83672f506d95 ("sunxi: add testing Linux 5.10") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kirkwood: refresh kernel configSungbo Eo2021-10-031-3/+7
| | | | | | | Refresh config with make kernel_oldconfig. Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: solidify SATA_PMP configSungbo Eo2021-10-032-0/+24
| | | | | | | | | | | | | | | | | | | SATA_PMP option is no longer exposed when no SATA host driver is enabled since upstream linux commit bd322af15ce9 ("ata: make SATA_PMP option selectable only if any SATA host driver is enabled"). Commit 1bb3f593ee73 ("kirkwood: update config for kernel 5.10") manually added CONFIG_SATA_PMP=y to config file, but the config will disappear for every kernel_oldconfig refresh. To prevent this, a small hack is added, which selects SATA_HOST automatically when SATA_PMP is enabled. This patch can be dropped if SATA_MV is ever re-added into kernel config file. Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run> [Move patch to generic/hack-5.10] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add recipe for common setup with loader-okli-compileAdrian Schmutzler2021-10-023-25/+13
| | | | | | | These instructions are repeated for a few devices now, let's move them to shared definition so we do not repeat ourselves too often. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: use AUTORELEASE on all uboot-* packagesAdrian Schmutzler2021-10-0210-10/+10
| | | | | | | | Nobody ever updates PKG_RELEASE when changing devices or setup in the various uboot-* packages. Use $(AUTORELEASE) so we still have proper versioning there. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* realtek: ensure output drivers are enabled in RTL8231Paul Fertser2021-10-022-10/+14
| | | | | | | | | | | | | The bootloader can leave the GPIO expander in a state which doesn't have output drivers enabled so GPIOs will properly work for input but output operations will have no effect. To avoid disrupting the boot in case the bootloader left direction and data registers in an inconsistent state (e.g. pulling SoC's reset to 0) reconfigure everything as input. Reviewed-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* bcm4908img: detect Linksys imagesRafał Miłecki2021-10-022-1/+23
| | | | | | Linksys uses an extra 0x100 bytes long tail for BCM4908 images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908img: store offset of tail dataRafał Miłecki2021-10-022-11/+14
| | | | | | | This simplifies some operations as it doesn't have to be caculated over and over. It will also allow adding support for more vendor formats. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: remove obsolete Kernel 5.4Paul Spooren2021-10-0273-8546/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* ipq806x: remove obsolete Kernel 5.4Paul Spooren2021-10-0246-8294/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* gemini: remove obsolete Kernel 5.4Paul Spooren2021-10-025-847/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* malta: remove obsolete Kernel 5.4Paul Spooren2021-10-021-335/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* armvirt: remove obsolete Kernel 5.4Paul Spooren2021-10-023-385/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: remove obsolete Kernel 5.4Paul Spooren2021-10-0210-2009/+0
| | | | | | | With the upgrade to Kernel 5.10 per default the old version is no longer required to be in tree. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-0256-154/+120
| | | | | | | | | | | | | | | | Manually rebased: generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: add Globalscale MOCHAbinRobert Marko2021-10-026-1/+471
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Globalscale MOCHAbin is a Armada 7040 based development board. Specifications: * Armada 7040 Quad core ARMv8 Cortex A-72 @ 1.4GHz * 2 / 4 / 8 GB of DDR4 DRAM * 16 GB eMMC * 4MB SPI-NOR (Bootloader) * 1x M.2-2280 B-key socket (for SSD expansion, SATA3 only) * 1x M.2-2250 B-key socket (for modems, USB2.0 and I2C only) * 1x Mini-PCIe 3.0 (x1, USB2.0 and I2C) * 1x SATA 7+15 socket (SATA3) * 1x 16-pin (2×8) MikroBus Connector * 1x SIM card slot (Connected to the mini-PCIe and both M.2 slots) * 2x USB3.0 Type-A ports via SMSC USB5434B hub * Cortex 2x5 JTAG * microUSB port for UART (PL2303GL/PL2303SA onboard) * 1x 10G SFP+ * 1x 1G SFP (Connected to 88E1512 PHY) * 1x 1G RJ45 with PoE PD (Connected to 88E1512 PHY) * 4x 1G RJ45 ports via Topaz 88E6141 switch * RTC with battery holder (SoC provided, requires CR2032 battery) * 1x 12V DC IN * 1x Power switch * 1x 12V fan header (3-pin, power only) * 1x mini-PCIe LED header (2x0.1" pins) * 1x M.2-2280 LED header (2x0.1" pins) * 6x Bootstrap jumpers * 1x Power LED (Green) * 3x Tri-color RGB LEDs (Controllable) * 1x Microchip ATECC608B secure element Note that 1G SFP and 1G WAN cannot be used at the same time as they are in parallel connected to the same PHY. Installation: Copy dtb from build_dir to bin/ and run tftpserver there: $ cp ./build_dir/target-aarch64_cortex-a72_musl/linux-mvebu_cortexa72/image-armada-7040-mochabin.dtb bin/targets/mvebu/cortexa72/ $ in.tftpd -L -s bin/targets/mvebu/cortexa72/ Connect to the device UART via microUSB port and power on the device. Power on the device and hit any key to stop the autoboot. Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g: $ setenv serverip 192.168.1.10 # Host $ setenv ipaddr 192.168.1.15 # Device Set the ethernet device (Example for the 1G WAN): $ setenv ethact mvpp2-2 Ping server to confirm network is working: $ ping $serverip Using mvpp2-2 device host 192.168.1.15 is alive Tftpboot the firmware: $ tftpboot $kernel_addr_r openwrt-mvebu-cortexa72-globalscale_mochabin-initramfs-kernel.bin $ tftpboot $fdt_addr_r image-armada-7040-mochabin.dtb Boot the image: $ booti $kernel_addr_r - $fdt_addr_r Once the initramfs is booted, transfer openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img.gz to /tmp dir on the device. Gunzip and dd the image: $ gunzip /tmp/openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img.gz $ dd if=/tmp/openwrt-mvebu-cortexa72-globalscale_mochabin-squashfs-sdcard.img of=/dev/mmcblk0 && sync Reboot the device. Hit any key to stop the autoboot. Reset U-boot env and set the bootcmd: $ env default -a $ setenv bootcmd 'load mmc 0 ${loadaddr} boot.scr && source ${loadaddr}' Optionally I would advise to edit the console env variable to remove earlycon as that causes the kernel to never use the driver for the serial console. Earlycon should be used only for debugging before the kernel can configure the console and will otherwise cause various issues with the console. $ setenv console 'console=ttyS0,115200' Save and reset $ saveenv $ reset OpenWrt should boot from eMMC now. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* lantiq: kernel: xway-nand: Move ECC engine setting to new DT bindingDaniel Kestrel2021-10-0213-7/+50
| | | | | | | | | | | | | | | | When trying to add support for another device with Micron NAND chips, it was discovered that the default setting in the kernel source does not work with Micron Chips, since the device trees setting is overwritten and hard coded by the kernel xway_nand driver. This was the original reason for this PR. A kernel patch sets the default ECC mode to soft without overwriting the device tree settings and the device tree for devices using it are updated with new parameters because the old ones are deprecated by torvalds/linux@533af69. A patch for kernel 5.4 is provided to support the new settings because kernel 5.4 does not support it. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: kernel: xway-nand: Fix setting on-die ECC engines in dtsHauke Mehrtens2021-10-022-2/+70
| | | | | | | This backports a fix proposed for upstream kernel to fix overwriting the NAND ECC engine in device tree. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-lantiq: fix sha1.h header clash when system libmd installedAlan Swanson2021-10-021-0/+172
| | | | | | | | Backport of u-boot commit "includes: move openssl headers to include/u-boot" https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167 Fixes: FS#3955 Signed-off-by: Alan Swanson <reiver@improbability.net>
* mediatek: mt7623: bpi-r2: add LED aliasesDaniel Golle2021-10-011-0/+29
| | | | | | Add aliases for LEDs in device tree of the BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove files and patches for Linux 5.4Daniel Golle2021-10-01183-111722/+0
| | | | | | | All subtargets only provide files and patches for Linux 5.10 by now so there is little use for the old Linux 5.4 stuff. Remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* armvirt: switch to Kernel 5.10Paul Spooren2021-10-011-2/+1
| | | | | | | | | | | | Armvirt is a development and testing platform and should therefore use the latest OpenWrt Kernel by default. Tested via qemu. Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* malta: switch to Kernel 5.10Paul Spooren2021-10-011-2/+1
| | | | | | | | | | Malta is a development and testing platform and should therefore use the latest OpenWrt Kernel by default. Acked-by: Rosen Penev <rosenp@gmail.com> Acked-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* prereq-build: revert "fix `which` detection on Fedora"Paul Spooren2021-09-301-1/+1
| | | | | | | | This reverts commit fca5ad55d292f8e481406123d0e95b3c85d39733. Causes problems on MacOS host systems. Signed-off-by: Paul Spooren <mail@aparcar.org>
* prereq-build: fix `which` detection on FedoraJani Partanen2021-09-301-1/+1
| | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Signed-off-by: Jani Partanen <rtfm@iki.fi> [fix commit subject and message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* mediatek: add FEATURES and order them alphabeticallyDaniel Golle2021-09-302-2/+2
| | | | | | | | Add common features 'gpio', 'nand', 'pci', 'pcie', 'squashfs' and 'usb' for all mediatek targets, add 'display' and 'usbgadget' for MT7623. Sort features alphabetically while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix and make use of LEDs on BPi-R2Daniel Golle2021-09-302-5/+36
| | | | | | | Fix BPi-R2 GPIO LEDs to indicate boot into production or recovery firmware in DTS and define them in default environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: provide power on mPCIe in SATA modeDaniel Golle2021-09-301-17/+2
| | | | | | | | | User reported that R64 doesn't provide power to the mPCIe slot in case the PCIe port is disabled as it is when selecting the SATA configuration. As users may still want to use USB-connected mPCIe modules in CN8 slot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.70Rui Salvaterra2021-09-308-54/+13
| | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/181-Revert-USB-bcma-Add-a-check-for-devm_gpiod_get.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.69Rui Salvaterra2021-09-305-26/+3
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 13:46:14 +0000