aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: Nanopi R1S H5: enable LAN LED configurationChukun Pan2021-10-302-0/+60
| | | | | | This enables the LEDs on the LAN interfaces. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: add support for FriendlyARM NanoPi R1S H5Chukun Pan2021-10-309-19/+587
| | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: CPU: Allwinner H5, Quad-core Cortex-A53 DDR3 RAM: 512MB Network: 10/100/1000M Ethernet x 2 USB Host: Type-A x 1 MicroSD Slot x 1 MicroUSB: for power input Debug Serial Port: 3Pin pin-header LED: WAN, LAN, SYS KEY: Reset Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Note: 1. OpenWrt currently does not support LED_FUNCTION, change back to the previous practice (Consistent with NanoPi R1). 2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to change the phy-mode from rgmii to rgmii-id. So set phy-mode for 5.4 and 5.10 respectively. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uboot-sunxi: add support for FriendlyARM NanoPi R1S H5Chukun Pan2021-10-302-0/+281
| | | | | | | Merged in https://github.com/u-boot/u-boot/commit/e7510d2, adjust back to the current 2020.04 version. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* rockchip: move r8152 related patches to genericChukun Pan2021-10-304-0/+0
| | | | | | | These patches can be used on other platforms, so move it to generic. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* tools/meson: update to 0.60.0Rosen Penev2021-10-304-2/+6
| | | | | | Add cmake support to meson. Otherwise only pkgconfig can be used. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-3026-135/+45
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath10k: backport fix for module load regression with iram-recoveryZhijun You2021-10-304-5/+126
| | | | | | | | Backport upstream fix for module load regression caused by IRAM recovery. Without this patch devices using mainline ath10k driver could lost wireless function because ath10k module failed to load. Signed-off-by: Zhijun You <hujy652@gmail.com>
* 6in4: remove 6in4 tunnel delete workaround (FS#3690)Hans Dedecker2021-10-302-3/+1
| | | | | | | | Remove 6in4 tunnel delete workaround as the real issue is now solved in netifd (https://git.openwrt.org/?p=project/netifd.git;a=commit;h=8f82742ca4f47f459284f3a07323d04da72ea5f6) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* 6rd : remove 6rd tunnel delete workaroundHans Dedecker2021-10-302-3/+1
| | | | | | | | Remove 6rd tunnel delete workaround in as the real issue is now solved in netifd (https://git.openwrt.org/?p=project/netifd.git;a=commit;h=8f82742ca4f47f459284f3a07323d04da72ea5f6) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: fix deletion of ip tunnels (FS#4058)Hans Dedecker2021-10-301-3/+3
| | | | | | 8f82742 system-linux: fix deletion of ip tunnels (FS#4058) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ipq40xx: detangle ath10k-board-qca4019 from ath10k-firmware-qca4019*Christian Lamparter2021-10-303-5/+2
| | | | | | | | | | | | | | | | | | | | | | Back in the day, the board-2.bin came with ath10k-firmware-qca4019. This changed with commit c3b2efaf24b5 ("linux-firmware: ath10k: add board firmware packages") which placed the board-2.bin into a separate package: ath10k-board-qca4019. This was great, because it addressed one of the caveat of the original ipq-wifi package: commit fa03d441e96e ("firmware: add custom IPQ wifi board definitions") | 2. updating ath10k-firmware-qca4019 will also replace | the board-2.bin. For this cases the user needs to | manually reinstall the wifi-board package once the | ath10k-firmware-qca4019 is updated. This could be extended further so that ipq-wifi packages no longer use "install-override" and the various QCA4019 variants list the ath10k-board-qca4019 as a CONFLICT package. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limitChristian Lamparter2021-10-309-30/+38
| | | | | | | | | | | | | | | | | | OpenWrt maintains two special out-of-tree DT properties: "qca,disable-5ghz" and "qca,disable-2ghz". These are implemented in a mac80211 ath9k patch "550-ath9k-disable-bands-via-dt.patch". With the things being what they are, now might be a good point to switch the devices to the generic and upstream "ieee80211-freq-limit" property. This property is much broader and works differently. Instead of disabling the drivers logic which would add the affected band and channels. It now disables all channels which are not within the specified frequency range. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # HH5A Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* dropbear: add config options for agent-forwarding supportSven Roederer2021-10-302-1/+13
| | | | | | | | | | * SSH agent forwarding might cause security issues, locally and on the jump machine (https://defn.io/2019/04/12/ssh-forwarding/). So allow to completely disabling it. * separate options for client and server * keep it enabled by default Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
* scripts: eva_ramboot.py: remove unused importJan-Niklas Burfeind2021-10-301-1/+0
| | | | | | | concludes: commit e7bc8984d9ca ("scripts: make eva_ramboot.py offset configurable") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* realtek: re-enable IPv6 routingBjørn Mork2021-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Commit 03e1d93e0779 ("realtek: add driver support for routing offload") added routing offload for IPv4, but broke IPv6 routing completely. The routing table is empty and cannot be updated: root@gs1900-10hp:~# ip -6 route root@gs1900-10hp:~# ip -6 route add unreachable default RTNETLINK answers: Invalid argument As a side effect, this breaks opkg on IPv4 only systems too, since uclient-fetch fails when there are no IPv6 routes: root@gs1900-10hp:~# uclient-fetch http://192.168.99.1 Downloading 'http://192.168.99.1' Failed to send request: Operation not permitted Fix by returning NOTIFY_DONE when offloading is unsupported, falling back to default behaviour. Fixes: 03e1d93e0779 ("realtek: add driver support for routing offload") Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: fix ZyXEL initramfs image generationBjørn Mork2021-10-301-2/+2
| | | | | | | | | | | | | | | | The current rule produces empty trailers, causing the OEM firmware update application to reject our images. The double expansion of a makefile variable does not work inside shell code. The second round is interpreted as a shell expansion, attempting to run the command ZYXEL_VERS instead of expanding the $(ZYXEL_VERS) makefile variable. Fix by removing one level of variable indirection. Fixes: c6c8d597e183 ("realtek: Add generic zyxel_gs1900 image definition") Tested-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Bjørn Mork <bjorn@mork.no>
* bcm53xx: MR32: replace i2c-gpio with SoC's i2cChristian Lamparter2021-10-303-1/+118
| | | | | | | | | During review of the MR32, Florian Fainelli pointed out that the SoC has a real I2C-controller. Furthermore, the connected pins (SDA and SCL) would line up perfectly for use. This patch swaps out the the bitbanged i2c-gpio with the real deal. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* sunxi: deselect CONFIG_VIDEO_SUN6I_CSI by defaultDaniel Golle2021-10-291-0/+1
| | | | | | | | Deselect CONFIG_VIDEO_SUN6I_CSI Kconfig symbol for now. If anyone wants to use CSI (camera interface) they should package the kernel module. After this change, sunxi targets build again. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add CONFIG_ARM_CRYPTO Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | | And another missing symbol... Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: add yet another missing Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | Set CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y for sunxi targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: backport patch fixing pinctrl driverRafał Miłecki2021-10-292-33/+106
| | | | | | | This switches pinctrl driver to use the old & good DT binding. There is no more need to adjust upstream DTS file. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* sunxi: add missing CONFIG_VIDEO_SUN4I_CSI Kconfig symbolDaniel Golle2021-10-291-0/+1
| | | | | | | Simply disable this for now, if anyone wants to use CSI feel free to package it as a kernel module package. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "secilc: update to version 3.3"Daniel Golle2021-10-291-3/+3
| | | | | | | | This reverts commit 2da891e7357c83c54a30075fcddbb63eeca0af99. secilc 3.3 requires libsepol to be version 3.3 as well and doesn't build otherwise. Revert for now. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "libsepol: update to version 3.3"Daniel Golle2021-10-291-3/+3
| | | | | | | | | This reverts commit de8a800ca9bda1171bfe17ee7653532465a8b596. Host build uses host includes instead of staging/hostpkg. This breaks the build in case of selinux host libs being older than version 3.3. Revert for now until better fix is found. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to version 1.0Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | wifi: writes to terminal hotplugcall and sqm read class sysfile symlinks unbound and sqm related loose ends support/example: policycoreutils host-compile is required TODO: this was wrong and it is actually needed linguist detectable does not work this way linguist-detectable updates README adds workflows adds a note about persistent /var option project moved to https://github.com/DefenSec/selinux-policy Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. Correct some typos Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/secilc/docs: Update the CIL documentation secilc: fix memory leaks in secilc2conf secilc: fix memory leaks in secilc libsepol/cil: Add support for using qualified names to secil2conf libsepol/cil: Add support for using qualified names to secil2tree secilc: Add support for using qualified names to secilc secilc/test: Add test for anonymous args secilc/docs: Relocate and reword macro call name resolution order secilc/docs: Document the order that inherited rules are resolved in secilc: Create the new program called secil2tree to write out CIL AST secilc/docs: Update the CIL documentation for various blocks secilc.c: Don't fail if input file is empty cil_conditional_statements.md: fix expr definition secilc/docs: Lists are now allowed in constraint expressions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* policycoreutils: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. libselinux/semodule: Improve extracting message Correct some typos Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release policycoreutils: free memory of allocated context in newrole policycoreutils: free memory of allocated context in run_init policycoreutils: free memory on lstat failure in sestatus policycoreutils: silence -Wextra-semi-stmt warning fixfiles: do not exclude /dev and /run in -C mode policycoreutils/setfiles: do not create useless setfiles.8.man file Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* checkpolicy: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. checkpolicy: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. checkpolicy: delay down-cast to avoid align warning checkpolicy: drop incorrect cast checkpolicy: update documentation checkpolicy: print reason of fopen failure checkpolicy: policy_define: cleanup declarations Update VERSIONs to 3.3-rc2 for release. checkpolicy: free extended permission memory checkpolicy: print warning on source line overflow checkpolicy: error out on parsing too big integers checkpolicy: avoid implicit conversion checkpolicy: resolve dismod memory leaks checkpolicy: add missing function declarations checkpolicy: mark file local functions in policy_define static checkpolicy: mark read-only parameters in module compiler const checkpolicy: misc checkpolicy tweaks checkpolicy: misc checkmodule tweaks checkpolicy: enclose macro argument in parentheses Update VERSIONs and Python bindings version to 3.3-rc1 for release checkpolicy: mark read-only parameters in policy define const checkpolicy/test: mark file local functions static checkpolicy: parse_util drop unused declaration checkpolicy: drop redundant cast to the same type checkpolicy: avoid potential use of uninitialized variable checkpolicy: check before potential NULL dereference checkpolicy: remove dead assignments checkpolicy: follow declaration-after-statement checkpolicy: use correct format specifier for unsigned checkpolicy: drop dead condition checkpolicy: simplify assignment checkpolicy: drop -pipe compile option checkpolicy: pass CFLAGS at link stage checkpolicy: silence -Wextra-semi-stmt warning checkpolicy: Do not automatically upgrade when using "-b" flag libsepol/checkpolicy: Set user roles using role value instead of dominance Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsemanage: update to version 3.3Dominick Grift2021-10-281-4/+4
| | | | | | | | | | | | Update VERSIONs to 3.3 for release. Update VERSIONs to 3.3-rc3 for release. Update VERSIONs to 3.3-rc2 for release. Update VERSIONs and Python bindings version to 3.3-rc1 for release libsemanage: Fix USE_AFTER_FREE (CWE-672) in semanage_direct_write_langext() libsemanage: silence -Wextra-semi-stmt warning libsemanage: fix use-after-free in parse_module_store() Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libselinux: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. libselinux: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. Update VERSIONs to 3.3-rc2 for release. libselinux/utils: drop requirement to combine compiling and linking Update VERSIONs and Python bindings version to 3.3-rc1 for release Improve error message for label file validation libselinux: replace strerror by %m libselinux: silence -Wextra-semi-stmt warning libselinux/utils/getseuser.c: fix build with gcc 4.8 selinux.8: document how mount flag nosuid affects SELinux libselinux: fix typo libselinux: improve getcon(3) man page libselinux: selinux_status_open: return 1 in fallback mode libselinux: do not use status page fallback mode internally libselinux: make selinux_status_open(3) reentrant libselinux: avc_destroy(3) closes status page libselinux: label_file.c: fix indent libselinux: regex: unify parameter names libselinux: sidtab_sid_stats(): unify parameter name libselinux: drop redundant casts to the same type libselinux: label_db::db_init(): open file with CLOEXEC mode libselinux: matchpathcon: free memory on realloc failure libselinux: label_file::init(): do not pass NULL to strdup libselinux: init_selinux_config(): free resources on error libselinux: matchmediacon(): close file on error libselinux: store_stem(): do not free possible non-heap object libselinux: getdefaultcon: free memory on multiple same arguments libselinux: setexecfilecon(): drop dead assignment libselinux: label_media::init(): drop dead assignment libselinux: label_x::init(): drop dead assignment libselinux: context_new(): drop dead assignment libselinux: exclude_non_seclabel_mounts(): drop unused variable libselinux: getconlist: free memory on multiple level arguments libselinux: selabel_get_digests_all_partial_matches: free memory after FTS_D block libselinux: selinux_restorecon: mark local variable static libselinux: avcstat: use standard length modifier for unsigned long long libselinux: sefcontext_compile: mark local variable static libselinux: Sha1Finalise(): do not discard const qualifier libselinux: label_common(): do not discard const qualifier libselinux: selinux_file_context_cmp(): do not discard const qualifier libselinux: sidtab_hash(): do not discard const qualifier libselinux: silence -Wstringop-overflow warning from gcc 10.3.1 libselinux: selinux_check_passwd_access_internal(): respect deny_unknown libselinux: do not duplicate make target when going into subdirectory Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsepol: update to version 3.3Dominick Grift2021-10-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update VERSIONs to 3.3 for release. libsepol/cil: Fix potential undefined shifts libsepol: Fix potential undefined shifts Update VERSIONs to 3.3-rc3 for release. libsepol/cil: Do not skip macros when resolving until later passes libsepol/cil: Limit the amount of reporting for bounds failures libsepol/cil: silence clang void-pointer-to-enum-cast warning libsepol: resolve GCC warning about null-dereference libsepol: use correct cast libsepol: ebitmap: mark nodes of const ebitmaps const Update VERSIONs to 3.3-rc2 for release. libsepol/cil: Handle operations in a class mapping when verifying libsepol/cil: Do not use original type and typeattribute datums libsepol: free memory after policy validation libsepol: avoid implicit conversions libsepol: fix typo libsepol/cil: Free duplicate datums in original calling function libsepol/cil: Fix detected RESOURCE_LEAK (CWE-772) Update VERSIONs and Python bindings version to 3.3-rc1 for release libsepol/cil: Limit the number of active line marks libsepol/cil: Add function to get number of items in a stack libsepol: Fix detected RESOURCE_LEAKs libsepol/cil: Fix syntax checking in __cil_verify_syntax() libsepol/cil: Use size_t for len in __cil_verify_syntax() libsepol/cil: Remove redundant syntax checking libsepol/cil: Improve in-statement to allow use after inheritance libsepol/cil: Simplify cil_tree_children_destroy() libsepol/cil: Refactor the function __cil_build_ast_node_helper() libsepol/cil: Don't destroy optionals whose parent will be destroyed libsepol/cil: Properly check for parameter when inserting name libsepol/cil: Reset expandtypeattribute rules when resetting AST libsepol/cil: Properly check parse tree when printing error messages libsepol/cil: Allow some duplicate macro and block declarations libsepol/cil: When writing AST use line marks for src_info nodes libsepol/cil: Report correct high-level language line numbers libsepol/cil: Add line mark kind and line number to src info libsepol/cil: Create common string-to-unsigned-integer functions libsepol/cil: Push line mark state first when processing a line mark libsepol/cil: Check for valid line mark type immediately libsepol/cil: Check the token type after getting the next token libsepol/cil: Check syntax of src_info statement libsepol/cil: move the fuzz target and build script to the selinux repository libsepol: replace strerror by %m libsepol/cil: remove obsolete comment libsepol/cil: do not allow \0 in quoted strings libsepol/cil: Fix handling category sets in an expression libsepol: assure string NUL-termination of ibdev_name libsepol: avoid implicit conversions libsepol: ignore UBSAN false-positives libsepol: avoid unsigned integer overflow libsepol/cil: Improve checking for bad inheritance patterns libsepol: silence -Wextra-semi-stmt warning libsepol/cil: do not override previous results of __cil_verify_classperms libsepol/cil: Provide option to allow qualified names in declarations libsepol/cil: make array cil_sym_sizes const libsepol/cil: Only reset AST if optional has a declaration libsepol/cil: Add function to determine if a subtree has a declaration libsepol/cil: Improve degenerate inheritance check libsepol/cil: Reduce the initial symtab sizes for blocks libsepol/cil: Check for empty list when marking neverallow attributes libsepol/cil: Fix syntax checking of defaultrange rule libsepol/cil: Properly check for loops in sets libsepol/cil: Allow duplicate optional blocks in most cases libsepol: declare read-only arrays const libsepol: declare file local variable static libsepol: drop unnecessary casts libsepol: drop repeated semicolons libsepol/cil: avoid using maybe uninitialized variables libsepol/cil: drop unnecessary casts libsepol/cil: drop dead store libsepol/cil: drop extra semicolon libsepol/cil: silence cast warning libsepol: remove dead stores libsepol: do not allocate memory of size 0 libsepol: mark read-only parameters of type_set_ interfaces const libsepol: mark read-only parameters of ebitmap interfaces const libsepol: remove dead stores libsepol/cil: follow declaration-after-statement libsepol: follow declaration-after-statement libsepol: avoid unsigned integer overflow libsepol: remove unused functions libsepol: resolve missing prototypes libsepol: fix typos libsepol: Quote paths when generating policy.conf from binary policy libsepol/cil: Account for anonymous category sets in an expression libsepol/cil: Fix anonymous IP address call arguments libsepol: quote paths in CIL conversion libsepol/cil: Resolve anonymous levels only once libsepol/cil: Pointers to datums should be set to NULL when resetting libsepol/cil: Resolve anonymous class permission sets only once libsepol/cil: Limit the number of open parenthesis allowed libsepol/cil: Destroy the permission nodes when exiting with an error libsepol/cil: Handle disabled optional blocks in earlier passes libsepol/cil: Do not resolve arguments to declarations in the call libsepo/cil: Refactor macro call resolution libsepol/cil: Do not add NULL node when inserting key into symtab libsepol/cil: Make name resolution in macros work as documented libsepol/cil: Fix name resolution involving inherited blocks libsepol/cil: Check for self-referential loops in sets libsepol/cil: Return an error if a call argument fails to resolve libsepol/cil: Check datum in ordered list for expected flavor libsepol/cil: Detect degenerate inheritance and exit with an error libsepol/cil: Fix instances where an error returns SEPOL_OK libsepol/cil: Properly reset an anonymous classperm set libsepol: use checked arithmetic builtin to perform safe addition libsepol/cil: Add functions to make use of cil_write_ast() libsepol/cil: Create functions to write the CIL AST libsepol/cil: Use CIL_ERR for error messages in cil_compile() libsepol/cil: Make invalid statement error messages consistent libsepol/cil: Do not allow tunable declarations in in-statements libsepol/cil: Sync checks for invalid rules in macros libsepol/cil: Check for statements not allowed in optional blocks libsepol/cil: Sync checks for invalid rules in booleanifs libsepol/cil: Reorder checks for invalid rules when resolving AST libsepol/cil: Use AST to track blocks and optionals when resolving libsepol/cil: Create new first child helper function for building AST libsepol/cil: Cleanup build AST helper functions libsepol/cil: Reorder checks for invalid rules when building AST libsepol/cil: Move check for the shadowing of macro parameters libsepol/cil: Create function cil_add_decl_to_symtab() and refactor libsepol/cil: Refactor helper function for cil_gen_node() libsepol/cil: Allow permission expressions when using map classes libsepol/cil: Exit with an error if declaration name is a reserved word libsepol/cil: More strict verification of constraint leaf expressions libsepol/cil: Set class field to NULL when resetting struct cil_classperms libsepol/cil: cil_reset_classperms_set() should not reset classpermission libsepol/cil: Destroy classperm list when resetting map perms libsepol/cil: Destroy classperms list when resetting classpermission libsepol/cil: Fix out-of-bound read of file context pattern ending with "\" libsepol/cil: Check for duplicate blocks, optionals, and macros libsepol: Write "NO_IDENTIFIER" for empty CIL constraint expression libsepol: Enclose identifier lists in CIL constraint expressions libsepol/cil: Allow lists in constraint expressions libsepol: Enclose identifier lists in constraint expressions libsepol: Write "NO_IDENTIFIER" for empty constraint expression libsepol: make num_* unsigned int in module_to_cil libsepol/cil: do not leak avrulex_ioctl_table memory when an error occurs libsepol/cil: fix NULL pointer dereference in __cil_insert_name libsepol/cil: replace printf with proper cil_tree_log libsepol/cil: remove stray printf libsepol/cil: make cil_post_fc_fill_data static libsepol: Check kernel to CIL and Conf functions for supported versions libsepol: Remove unnecessary copying of declarations from link.c libsepol: Properly handle types associated to role attributes libsepol: Expand role attributes in constraint expressions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* mediatek: make sure MMC is not busy before commencing sysupgradeDaniel Golle2021-10-282-0/+2
| | | | | | | | | In case of the block device still being in use, re-reading the partition table fails. In that case, abort sysupgrade to avoid corrupting the just-written image because of wrong offsets caused by failure to re-read the partition table. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files, metadata: support additional group membershipDaniel Golle2021-10-282-4/+27
| | | | | | | | | | | | Some packages may require additional group membership for the system user added by that package. Allow defining additional groups as third member of the ':'-separated tuple, allowing to specify multiple ','-separated groups with optional GID. Example: USERID:=foouser=1000:foogroup=1000:addg1=1001,addg2=1002,addg3 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* umdns: add missing syscall to seccomp filterMichael Peleshenko2021-10-271-0/+1
| | | | | | | The 'madvise', syscall is missing. Found with 'utrace /usr/sbin/umdns' on an R7800 and RT3200. Signed-off-by: Michael Peleshenko <mpeleshenko@gmail.com>
* ipq806x: add support for Netgear Nighthawk Pro Gaming XR500Peter Geis2021-10-269-448/+545
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Netgear Nighthawk Pro Gaming XR500. It is the successor to the Netgear Nighthawk R7800 and shares almost identical hardware to that device. The stock firmware is a heavily modified version of OpenWRT. Specifications: SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB NAND Flash Wireless: 2x Qualcomm Atheros QCA9984 Ethernet: 2x 1000/100/10 dedicated interfaces Switch: 5x 1000/100/10 external ports USB: 2x 3.0 ports More information: Manufacturer page: https://www.netgear.com/gaming/xr500/ Almost identical to Netgear R7800 Differences (r7800 > xr500): Flash: 128MiB > 256MiB Removed esata swapped leds: usb1 (gpio 7 > 8) usb2 (gpio 8 > 26) guest/esata (gpio 26 > 7) MAC addresses: On the OEM firmware, the mac addresses are: WAN: *:50 art 0x6 LAN: *:4f art 0x0 (label) 2G: *:4f art 0x0 5G: *:51 art 0xc Installation: Install via Web Interface (preferred): Utilize openwrt-ipq806x-netgear_xr500-squashfs-factory.img Install via TFTP recovery: 1.Turn off the power, push and hold the reset button (in a hole on backside) with a pin 2.Turn on the power and wait till power led starts flashing white (after it first flashes orange for a while) 3.Release the reset button and tftp the factory img in binary mode. The power led will stop flashing if you succeeded in transferring the image, and the router reboots rather quickly with the new firmware. 4.Try to ping the router (ping 192.168.1.1). If does not respond, then tftp will not work either. Uploading the firmware image with a TFTP client $ tftp 192.168.1.1 bin put openwrt-ipq806x-netgear_xr500-squashfs-factory.img Note: The end of the last partition is at 0xee00000. This was chosen by the initial author, but nobody was able to tell why this particular arbitrary size was chosen. Since it's not leaving too much empty space and it's the only issue left, let's just keep it for now. Based on work by Adam Hnat <adamhnat@gmail.com> ref: https://github.com/openwrt/openwrt/pull/3215 Signed-off-by: Peter Geis <pgwipeout@gmail.com> [squash commits, move common LEDs to DTSI, remove SPDX on old files, minor whitespace cleanup, commit message facelift, add MAC address overview, add Notes, fix MAC addresses, use generic name for partition nodes in DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: minew g1-c: Allow dynamic RAM sizesBruno Randolf2021-10-261-5/+0
| | | | | | | | Allow RAM size to be passed thru U-Boot. There are 128MB and 64MB versions of Minew G1-C. This is also in line with the behaviour of most other RAMIPS boards. Signed-off-by: Bruno Randolf <br1@einfach.org>
* ucode: update to latest Git HEADJo-Philipp Wich2021-10-251-3/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 0f022aa lib: increase refcount when returning cached module instance c9e68bb lib: introduce resolver library 9041e24 lib: fix uninitialized memory access on handling %J string formats 4ee06d8 syntax: introduce optional chaining operators ce4a7d9 vm: reset callframes before invoking unhandled exception handler 218e822 vm: clear exception information before calling managed code functions 5b908bd ubus: properly handle signed 64bit values too e43b751 ubus: fix handling signed 16bit and 32bit integers 137428f nl80211: fix issues spotted by static code analyzer b9d4f61 nl80211: treat signal attr values as signed integers 9a7c355 nl80211: expose sta_info attributes bb358d9 lib: introduce Linux 802.11 netlink binding 914f54c types: fix invalid memory access on setting non-contiguous array indexes 631f00d main: fix leaking module name when processing -m flag e55188b compiler: properly handle jumps to offset 0 98c4147 tests: support specifying cmdline args in testcase files 64e4f68 types: fix formatting escape sequences for 8 bit chars dd86e1d rtnl: automatically derive message family from certain address attrs 74fdb97 rtnl: expose IPv4 and IPv6 devconfig information 7fa1008 rtnl: allow reply nla payloads to be smaller than headsize cbae3cb lib: introduce Linux route netlink binding e6dd389 ci: adjust build prereqs for GitHub as well 07ae165 ci: add libnl-tiny to prereqs Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sunxi: switch to Kernel 5.10Paul Spooren2021-10-251-2/+2
| | | | | | | | Compile tested and run tested on Pine64+. Acked-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: Add extra configuration optionsHauke Mehrtens2021-10-242-1/+7
| | | | | | These options show up when compiling the at91 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-243-2/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAM9X60-EK board. Hardware: - SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices Flashing: - follow the procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: enable kernel config for sam9x60Claudiu Beznea2021-10-241-2/+27
| | | | | | Enable kernel config for SAM9X60. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-243-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-243-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: enable specific sam9x kernel config flagsClaudiu Beznea2021-10-241-6/+106
| | | | | | Enable specific sam9x kernel config flags. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel: bump to 5.10Claudiu Beznea2021-10-2414-779/+109
| | | | | | | | | | | | Bump at91 targets to kernel v5.10. With this patches and files for wb45n and wb50n were removed as they are now included in upstream kernel. Along with: - this the kernel config for sama5d2 and sam9x targets has been refreshed (with make kernel_menuconfig + save); - CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9, SAM9X60) has been enabled such that sam9x SoCs to be able to boot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* wolfssl: enable ECC Curve 25519 by defaultStan Grishin2021-10-241-1/+1
| | | | | | | * fixes https://github.com/openwrt/packages/issues/16652 see https://github.com/openwrt/packages/issues/16674#issuecomment-934983898 Signed-off-by: Stan Grishin <stangri@melmac.net>
* sunxi: 5.10: enable sun8i-thermalChukun Pan2021-10-242-1/+2
| | | | | | | | | | | | Enable the sun8i-thermal driver to allow reading the temperature of the SoC. As suggested by mans0n, disable this driver in the a8 subtarget because it does not support yet. Tested on NanoPi R1S H5. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* uclibc++: removeRosen Penev2021-10-249-428/+2
| | | | | | | | | | | | | | | No package here depends on it. Furthermore, uClibc++ is a fairly buggy C++ library and seems to be relatively inactive upstream. It also lacks proper support for modern C++11 features. The main benefit of it is size: 66.6 KB vs 287.3 KB on mips24kc. Static linking and LTO can help bring the size down of packages that need it. Added warning message to uclibc++.mk Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* u-boot.mk: always link host libraries staticAndre Heider2021-10-244-42/+1
| | | | | | | | Host libraries are only build static, so let's pass --static to pkg-config globally and remove the then unnecessary patches doing exactly that individually. Signed-off-by: Andre Heider <a.heider@gmail.com>
* tools/pkgconf: add PKG_CONFIG_EXTRAARGS for additional argumentsAndre Heider2021-10-241-1/+2
| | | | | | | This can be used my the OpenWrt build system to pass additional arguments when required. Signed-off-by: Andre Heider <a.heider@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:45:20 +0000