aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: refresh kernel configurationHauke Mehrtens2018-01-224-4/+2
| | | | | | | | Just refresh the sunxi kernel configuration. This also moves the CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG option to the config-4.9 file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: add IEEE-1284 parallel port support"Jo-Philipp Wich2018-01-221-38/+5
| | | | | | | | | This reverts commit 666e9cf2220b11ccd024cad13ad54ca71d40c5b3. The change has not been build-tested on non-x86 targets and leads to stalled kernel builds due to unset configuration symbols there. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: update to latest git HEADJohn Crispin2018-01-221-4/+4
| | | | | | 846e20c procd: add timing to start/stop logging Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: add support for the MikroTik RB911-2Hn/5Hn boardsGabor Juhos2018-01-2211-3/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet). * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably. Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its ethernet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 5. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 7. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: make leds-gpio usable with single-ended GPIOsGabor Juhos2018-01-222-0/+90
| | | | | | | | | Add patches for the leds-gpio driver to make it usable with open-drain and open-source kind of GPIO lines. This type of functionality is required by various MikroTik boards. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: mach-rbspi: return rb_info from rbspi_platform_setupGabor Juhos2018-01-221-13/+13
| | | | | | | | | | | | Modify the rbspi_platform_setup() function to return the pointer of the rb_info structure. This allows board specific setup routines to access the various fields of the information. It is useful for investigating the hardware option bits for example. Also update the board setup codes, to ensure that those handle the new return value correctly. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: add definitions for RouterBOARD hardware option bitsGabor Juhos2018-01-221-0/+26
| | | | | | | | | | | | Add bit definitions for the 'hardware options' tag which is used in the MikroTik devices' hardware configurations. These values can be used in board setup codes, to do different initialization sequences. The values were obtained from the RouterOS 6.41-rc38 patches. Additionally, introduce two helper functions what make the processing of the hardware options easy. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* uqmi: silence error on pin verificationKoen Vandeputte2018-01-221-1/+1
| | | | | | | | | | | | If a device only supports the 2nd verification method (uim), the first method will fail as expected reporting an error: "Command not supported" Silence both separate methods and only report an error regarding pin verification if both fail. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add IEEE-1284 parallel port supportDaniel Gimpelevich2018-01-221-5/+38
| | | | | | | | | | The kmod-lp package included both lp.ko and ppdev.ko, but ECP device drivers may or may not require lp NOT to be loaded, needing only ppdev. Additionally, There were no packages for any parport interface modules, such as uss720 or parport_pc, provided here. It has not been otherwise possible to use PC-style parport hardware for kmod-lp. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* pistachio: make patches apply againHauke Mehrtens2018-01-201-2/+2
| | | | | | | | Support for Winbond NAND flash detection was added into the generic patches and this conflicted with this patch adding Gigadevice support. Fixes: 02050f7e7d5b ("kernel/4.{4, 9}: add manufacturer ID for Winbond NANDs") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: make patches apply againHauke Mehrtens2018-01-201-18/+0
| | | | | | | | Some part of this patch was added to the generic patches as it was needed also for some other target. Do not add it here any more. Fixes: 02050f7e7d5b ("kernel/4.{4, 9}: add manufacturer ID for Winbond NANDs") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Add CONFIG_RETPOLINE to fix buildHauke Mehrtens2018-01-202-6/+7
| | | | | | | | | This adds support for the new configuration option CONFIG_RETPOLINE and refreshes the configuration. Fixes: d8565a06dc ("kernel: bump 4.9 to 4.9.77") Fixes: 9ddfac8015 ("kernel: bump 4.14 to 4.14.14") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: use upstream patches for muslHauke Mehrtens2018-01-2023-781/+833
| | | | | | | | | | This replaces the current patches used to make the kernel headers compatible with musl with the version which was accepted upstream. This is included in upstream kernel 4.15. This was compile tested with iproute2 build on all supported kernel versions with musl and one one with glibc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ubus: fix PKG_MIRROR_HASHHauke Mehrtens2018-01-201-1/+1
| | | | | Fixes: dd975d15a71f ("ubus: fix wrong PKG_SOURCE_DATE") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* nftables: update to 0.8.1Philip Prindeville2018-01-202-81/+6
| | | | | | | Note this requires libnftnl-1.0.8 or higher, so that update needs to be merged first. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* libnftnl: update to 1.0.9Philip Prindeville2018-01-201-7/+7
| | | | | | | | Also, drop unsupported configure options. Don't use git retrieve but released tarball instead. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: backport fix for nftables on big EndianHauke Mehrtens2018-01-201-0/+323
| | | | | | | | | | | nftables 0.8.1 generates some new commands which will not work without this on big endian systems. This patch is included in Linux 4.11 and later. My rule matching a TCP port was not working: nft add rule ip foo bar ct state new tcp dport 22 accept Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/tar: update to 1.30Hannu Nyman2018-01-204-36/+16
| | | | | | update GNU tar to 1.30 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: bump 4.4 to 4.4.112Kevin Darbyshire-Bryant2018-01-2012-165/+19
| | | | | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: target/linux/generic/patches-4.4/030-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch target/linux/generic/patches-4.4/030-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/patches-4.4/030-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Compile-tested: ar71xx Archer C7 v2 Run-tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 4.9 to 4.9.77Kevin Darbyshire-Bryant2018-01-2029-395/+245
| | | | | | | | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: target/linux/generic/backport-4.9/023-2-smsc75xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/backport-4.9/023-3-cx82310_eth-use-skb_cow_head-to-deal-with-cloned-skb.patch target/linux/generic/backport-4.9/023-4-sr9700-use-skb_cow_head-to-deal-with-cloned-skbs.patch target/linux/generic/backport-4.9/023-5-lan78xx-use-skb_cow_head-to-deal-with-cloned-skbs.patch CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Compile-tested: ar71xx Archer C7 v2 Run-tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.14Kevin Darbyshire-Bryant2018-01-203-14/+14
| | | | | | | | | | | | | | Refresh patches. CVEs completely or partially addressed: CVE-2017-5715 CVE-2017-5753 CVE-2017-17741 CVE-2017-1000410 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel/4.{4, 9}: add manufacturer ID for Winbond NANDsGabor Juhos2018-01-203-1/+69
| | | | | | | | | | | | | | | | | | | Some MikroTik devices are using a Winbond NAND flash. Linux treats it as an unknown NAND before version 4.11: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Unknown NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Backport a patch from 4.11 to show the manufacturer correctly: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Winbond NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Tested on a MikroTik R951Ui-2HnD board. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* dnsmasq: backport validation fix in dnssec security fixKevin Darbyshire-Bryant2018-01-202-2/+2
| | | | | | | | A DNSSEC validation error was introduced in the fix for CVE-2017-15107 Backport the upstream fix to the fix (a simple typo) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: backport dnssec security fixKevin Darbyshire-Bryant2018-01-192-1/+203
| | | | | | | | | | | | | | | | | | | | | | | | | CVE-2017-15107 An interesting problem has turned up in DNSSEC validation. It turns out that NSEC records expanded from wildcards are allowed, so a domain can include an NSEC record for *.example.org and an actual query reply could expand that to anything in example.org and still have it signed by the signature for the wildcard. So, for example !.example.org NSEC zz.example.org is fine. The problem is that most implementers (your author included, but also the Google public DNS people, powerdns and Unbound) then took that record to prove the nothing exists between !.example.org and zz.example.org, whereas in fact it only provides that proof between *.example.org and zz.example.org. This gives an attacker a way to prove that anything between !.example.org and *.example.org doesn't exists, when it may well do so. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: remove merged ipq4019 patchChristian Lamparter2018-01-1811-39/+11
| | | | | | | | | The patch 0022-dts-ipq4019-support-ARMv7-PMU.patch was merged into 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refresh patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: remove dependency on non-existent kmodChristian Lamparter2018-01-181-1/+1
| | | | | | | | During the integration of the ipq40xx target, the phy drivers were included into the ipq806x's target kernel config. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq-wifi: align AVM FRITZ!Box 4040's board-2.bin packageChristian Lamparter2018-01-183-3/+3
| | | | | | | This patch renames the AVM FRITZ!Box 4040's board-2.bin file and package to match the 'vendor_product' format. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: overhaul AVM FRITZ!box 4040 device-tree fileChristian Lamparter2018-01-181-38/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch aligns the device-tree file with the latest guidelines. - No longer include qcom-ipq4019-ap.dk01.1.dtsi. This file is only partially upstream and therefore subjected to changes that might not be compatible with the board. As a result, the definitions from the file have been copied into this dts. - exclusively use decimal GPIO addresses. - reorganize the reserved-memory layout to waste less memory. There's no point in keeping the u-boot loader around. This should also make it possible to create an image that will boot with the original EVA/ADAM2 loader without needing to install the modified u-boot loader. And finally mark the "tz-apps" as reusable. There isn't a way to upload apps to the trust-zone in OpenWrt yet. But it might see some use in the future as a "secure" key-store/TPM. - sort the first-level nodes alphabetically. - sort nodes with an address by the address. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA988x firmware to 10.2.4-1.0-00033Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA988x. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA9887 firmware to 10.2.4-1.0-00033Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.2.4-1.0-00033 firmware for the QCA9887. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA9888 firmware to 10.4-3.4-00104Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.4-3.4-00104 firmware for the QCA9888. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA9984 firmware to 10.4-3.4-00104Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.4-3.4-00104 firmware for the QCA9984. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update QCA4019 firmware to 10.4-3.4-00104Christian Lamparter2018-01-181-1/+1
| | | | | | | This patch updates ath10k-firmware to use the firmware-5.bin_10.4-3.4-00104 firmware for the QCA4019. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* firmware: ath10k-firmware: update to 2017-12-20Christian Lamparter2018-01-181-3/+3
| | | | | | | This update automatically includes a new firmware for the QCA6174: firmware-6.bin_WLAN.RM.4.4.1-00079-QCARMSWPZ-1 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* odhcp6c: add sendopts config support and update to latest git HEADHans Dedecker2018-01-182-5/+11
| | | | | | | | | | | | | | | | | | | | | Add sendopts config support allowing to add options in sent DHCPv6 packets. Options can be configured as follows : uci set network.wan6.sendopts="sntpservers:3001:3001::1,3001:3001::2 11:00000000000000000000006674692F 0x3e8:ABCDEF" Based on a patch by Frank Andrieu <fandrieu@gmail.com> See https://git.openwrt.org/?p=project/odhcp6c.git;a=commit;h=510aaf6d528210c5e8a6159f9b80b32615e88c5f for a more detailed description. Latest git changes : 1f93bd4 dhcpv6: rework option passthrough logic a477e95 odhcp6c: rework userclass and vendorclass command handling 510aaf6 odhcp6c: add -x opt:val support ab75be1 treewide: update copyrights to 2018 f3a4609 odhcp6c: let odhcp6c_add_state return a success/failure indication Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: tl-wr840n-v5: increase firmware partition for 4Mmtk layotSerg Studzinskii2018-01-183-9/+3
| | | | | | | | | | | According to console log during TP-Link TL-WR840N v5 OEM firmware update procedure 0x3e0000-0x3f0000 64kB "config" partition, which is used to store router's configuration settings, is erased and recreated again during every OEM firmware update procedure, thus does not contain any valuable factory data. So it is conviniant to use this extra 64kB erase block for jffs overlay due limited flash size on this device like it used on TP-Link's ar71xx boards. Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
* tools/mpfr: update to 4.0.0Hannu Nyman2018-01-183-10/+10
| | | | | | Update mpfr to 4.0.0 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* tools/mpc: Update to 1.1.0Hannu Nyman2018-01-181-2/+2
| | | | | | | | Update mpc to 1.1.0 (note: adds compatibility with mpfr 4.0.0) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* util-linux: add fstrim supportDirk Brenken2018-01-181-2/+21
| | | | | | This PR adds optional fstrim support Signed-off-by: Dirk Brenken <dev@brenken.org>
* kirkwood: fix sysupgrade尤晓杰2018-01-181-1/+1
| | | | | | | | | | | | The platform_check_image() stub need to return 0 for success, otherwise the sysupgrade will fail with: Image check 'platform_check_image' failed. Fixes: aa6f5f1787a6 ("kirkwood: use image metadata") Signed-off-by: 尤晓杰 <yxj790222@163.com> [reworded commit message} Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: fix ZyXEL NBG6817 sysupgradeMathias Kresin2018-01-181-7/+10
| | | | | | | | | | | Use the first found directory in the tar archive instead of relying on a directory named according to the userspace boardname. It allows to change the boardname without adding another compatibility layer to the zyxel sysupgrade. Fixes: 33f09cf15178 ("ipq806x: convert to dt-based board-detection") Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: check if direction can be setMathias Kresin2018-01-182-3/+10
| | | | | | | | | | | | Obviously not all GPIO controller allow to change the direction. The issue is around since the beginning of the script but only due to the recent changes error messages are more visible. Add a check if a change of the direction is supported by the GPIO controller and fallback to setting only the value if not. Fixes: FS#1271 Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: fix inverted logicMathias Kresin2018-01-181-1/+1
| | | | | | | | | GPIOs are exported as active high to the sysfs, hence the logic need to be inverted. Fixes: e66c47fb14f5 ("base-files: gpio switch: set output value with direction") Signed-off-by: Mathias Kresin <dev@kresin.me>
* ubox: update to latest git HEADHans Dedecker2018-01-171-3/+3
| | | | | | e7a63fb ubox: Remove unnecessary memset calls Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ubus: fix wrong PKG_SOURCE_DATEHans Dedecker2018-01-171-1/+1
| | | | | | Fix wrong PKG_SOURCE_DATE introduced in e14cac0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ubus: update to latest git HEADHans Dedecker2018-01-171-3/+3
| | | | | | | | 5bae22e ubus/lua: pass notification name to callback 212ceb1 valgrind complained about these d57907c fix invalid close() call Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath9k: discard undersized packetsFelix Fietkau2018-01-171-0/+25
| | | | | | | | Sometimes the hardware will push small packets that trigger a WARN_ON in mac80211. Discard them early to avoid this issue. Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: remove use of STAGING_DIR_HOST/usr (fixes cmake build error on macOS)Felix Fietkau2018-01-171-2/+2
| | | | | | | | This directory is never created, nor is it used anywhere. Using it in HOST_LDFLAGS causes a linker warning to be emitted on macOS, which messes with cmake configure tests. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* .gitignore: add .project & .cproject for eclipse usersCatrinel Catrinescu2018-01-171-0/+2
| | | | | | | | For eclipse users, .project is always created inside the project. For users of CDT within Eclipse, add also .cproject, thanks Dirk Feytons. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
* ar71xx: drop mdio-gpio.h include from mach-om5pacv2.cGabor Juhos2018-01-171-6/+0
| | | | | | | | | | | | | | The setup code of the OpenMesh OM5P ACv2 device uses nothing from the mdio-gpio.h header, so remove the inclusion of that. Also remove the kernel version check which is needed only because the mdio-gpio.h header exists in a different path in older kernels. Compile tested only. Cc: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Gabor Juhos <juhosg@freemail.hu>