aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* uboot-bcm4908: update to the latest genericRafał Miłecki2022-09-011-3/+3
| | | | | | | | 0625aad74d arm: dts: add ASUS GT-AX6000 6fb1cb624d arm: dts: add Netgear RAXE450 / RAXE550 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3592aa85664040a118654555afb78659af756a4e)
* mac80211: disable ft-over-ds by defaultFelix Fietkau2022-08-301-1/+1
| | | | | | | | | Testing has shown it to be very unreliable in variety of configurations. It is not mandatory, so let's disable it by default until we have a better solution. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 2984a0420649733662ff95b0aff720b8c2c19f8a)
* mt76: backport fix encap offload ethernet type checkThibaut VARÈNE2022-08-281-0/+63
| | | | | | | | | | The driver needs to check if the format is 802.2 vs 802.3 in order to set a tx descriptor flag. skb->protocol can't be used, since it may not be properly initialized for packets coming in from a packet socket. Fix misdetection by checking the ethertype from the skb data instead. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit description]
* ath79: add support for RouterBOARD mAPThibaut VARÈNE2022-08-285-0/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik mAP-2nd (sold as mAP) is an indoor 2.4Ghz AP with 802.3af/at PoE input and passive PoE passthrough. See https://mikrotik.com/product/RBmAP2nD for more details. Specifications: - SoC: QCA9533 - RAM: 64MB - Storage: 16MB NOR - Wireless: QCA9533 802.11b/g/n 2x2 - Ethernet: 2x 10/100 ports, 802.3af/at PoE in port 1, 500 mA passive PoE out on port 2 - 7 user-controllable LEDs Note: the device is a tiny AP and does not distinguish between both ethernet ports roles, so they are both assigned to lan. With the current setup, ETH1 is connected to eth1 and ETH2 is connected to eth0 via the embedded switch port 2. Flashing: TFTP boot initramfs image and then perform sysupgrade. The "ETH1" port must be used to upload the TFTP image. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Tested-By: Andrew Powers-Holmes <aholmes@omnom.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit e1223dbee332b89caf71850eb909104529595c31)
* ath79: add support for MikroTik RouterBOARD hAP ac liteThibaut VARÈNE2022-08-287-0/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik RB952Ui-5ac2nD (sold as hAP ac lite) is an indoor 2.4Ghz and 5GHz AP/router with a 2 dBi integrated antenna. See https://mikrotik.com/product/RB952Ui-5ac2nD for more details. Specifications: - SoC: QCA9533 - RAM: 64MB - Storage: 16MB NOR - Wireless: QCA9533 802.11b/g/n 2x2 / QCA9887 802.11a/n/ac 2x2 - Ethernet: AR934X switch, 5x 10/100 ports, 10-28 V passive PoE in port 1, 500 mA PoE out on port 5 - 6 user-controllable LEDs: - 1x user (green) - 5x port status (green) Flashing: TFTP boot initramfs image and then perform sysupgrade. The "Internet" port (port number 1) must be used to upload the TFTP image, then connect to any other port to access the OpenWRT system. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 2bd33e8626bd04fd7115ee1a42aaf03aae2fffb8)
* ipq40xx: add Linksys MR8300 WAN portJulien Cassette2022-08-281-2/+6
| | | | | | | | | | | This makes the WAN interface and port appear in LuCi -> Network -> Switch on Linksys MR8300. This allows to configure a VLAN on WAN. Fixes: FS#4227 Signed-off-by: Julien Cassette <julien.cassette@gmail.com> (cherry picked from commit 2c1f8a665eb3dce27deb4f9f9b718eb8baf997bd)
* hostapd: ubus: fix uninitialized pointerDavid Bauer2022-08-281-1/+1
| | | | | | | | | This fixes passing a bogus non-null pointer to the ubus handler in case the transition request is rejected. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 9b880f09f394049e0629e3c9d4061f431a6b19a8) Signed-off-by: Nick Hainke <vincent@systemli.org>
* feeds: use git-src-full to allow Git versioningPaul Spooren2022-08-282-6/+6
| | | | | | | | | | | | | | | | Both $(AUTORELEASE) and $(PKG_SRC_VERSION) (from luci.git) use the Git log to determine releases and package timestamps. Feeds are shallow cloned by default, resulting in an incomplete Git log and therefore different local package versions than offered upstream. This commits sets the default feeds to use `src-git-full` to solve that. Add fixes from "2b1d92f: scripts/feeds: silence git warning by selecting pull style" to `src-git-full` Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 7fae1e5677e9bb4979c8d4ac99be4de6955b13d0)
* ramips: add support for YunCore AX820/HWAP-AX820Clemens Hopfer2022-08-285-1/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two versions which are identical apart from the enclosure: YunCore AX820: indoor ceiling mount AP with integrated antennas YunCore HWAP-AX820: outdoor enclosure with external (N) connectors Hardware specs: SoC: MediaTek MT7621DAT Flash: 16 MiB SPI NOR RAM: 128MiB (DDR3, integrated) WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN) LED: Status (green) Button: Reset Power: 802.11af/at PoE; DC 12V,1A Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external Flash instructions: The "OpenWRT support" version of the AX820 comes with a LEDE-based firmware with proprietary MTK drivers and a luci webinterface and ssh accessible under 192.168.1.1 on LAN; user root, no password. The sysupgrade.bin can be flashed using luci or sysupgrade via ssh, you will have to force the upgrade due to a different factory name. Remember: Do *not* preserve factory configuration! MAC addresses as used by OEM firmware: use address source 2g 44:D1:FA:*:0b Factory 0x0004 (label) 5g 46:D1:FA:*:0b LAA of 2g lan 44:D1:FA:*:0c Factory 0xe000 wan 44:D1:FA:*:0d Factory 0xe000 + 1 The wan MAC can also be found in 0xe006 but is not used by OEM dtb. Due to different MAC handling in mt76 the LAA derived from lan is used for 2g to prevent duplicate MACs when creating multiple interfaces. Signed-off-by: Clemens Hopfer <openwrt@wireloss.net> (cherry picked from commit 4891b865380e2b7f32acf0893df9c1ca9db8d4ea) [switch to mtd-mac-address instead of nvmem-cells]
* sunxi: add support for Banana Pi M2 BerryZoltan HERPAI2022-08-282-0/+17
| | | | | | | | | | | | | | | | | | | CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz Memory: 1GB DDR3 Storage: SDcard, native SATA Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT USB: 4x USB 2.0 Installation: Use the standard sunxi installation to an SD-card. While the board is very similar to the M2 Ultra board (the V40 is the automotive version of the R40), as both the u-boot and kernel supports them separately, and some pins are different, let's add a separate device spec. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit 9aa66b8ce730aebff76d353392151708a897a3a0)
* ramips: add support for Sitecom WLR-4100 v1 002Andrea Poletti2022-08-284-2/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sitecom WLR-4100 v1 002 (marked as X4 N300) is a wireless router Specification: SoC: MT7620A RAM: 64 MB DDR2 Flash: MX25L6405D SPI NOR 8 MB WIFI: 2.4 GHz integrated Ethernet: 5x 10/100/1000 Mbps QCA8337 USB: 1x 2.0 LEDS: 2x GPIO controlled, 5x switch Buttons: 1x GPIO controlled UART: row of 4 unpopulated holes near USB port, starting count from white triangle on PCB: VCC 3.3V GND TX RX baud: 115200, parity: none, flow control: none Installation Connect to one of LAN (yellow) ethernet ports, Open router configuration interface, Go to Toolbox > Firmware, Browse for OpenWrt factory image with dlf extension and hit Apply, Wait few minutes, after the Power LED will stop blinking, the router is ready for configuration. Known issues Some USB 2.0 devices work at full speed mode 1.1 only MAC addresses factory partition only contains one (binary) MAC address in 0x4. u-boot-env contains four (ascii) MAC addresses, of which two appear to be valid. factory 0x4 **:**:**:**:b9:84 binary u-boot-env ethaddr **:**:**:**:b9:84 ascii u-boot-env wanaddr **:**:**:**:b9:85 ascii u-boot-env wlanaddr 00:AA:BB:CC:DD:12 ascii u-boot-env iNICaddr 00:AA:BB:CC:DD:22 ascii The factory firmware only assigns ethaddr. Thus, we take the binary value which we can use directly in DTS. Additional information OEM firmware shell password is: SitecomSenao useful for creating backup of original firmware. There is also another revision of this device (v1 001), based on RT3352 SoC The nvmem feature (commit 06bb4a5) was introduced in master after the splitting of the 21.02 branch. It need to be reverted in 21.02.. Signed-off-by: Andrea Poletti <polex73@yahoo.it> [remove config DT label, convert to nvmem, remove MAC address setup from u-boot-env, add MAC address info to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit de0c380a5f8289839ab970e794a45f0e04a466a3) Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tools/libelf: alpine linux os type: linux-musl fixIsaev Ruslan2022-08-281-0/+11
| | | | | | | Prevents ./configure "checking build system" test fail on Alpine linux. Signed-off-by: Isaev Ruslan <legale.legale@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit description]
* uclibc++: fix compilation with long file pathsAlois Klink2022-08-281-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, uClic++ 0.2.5 fails to compile when using a long filepath. For example, if the openwrt directory is in the path: /tmp/this_directory_name_is_very_long/more_long_paths/.../openwrt, then uclibc++ will cause a very obtuse error. Although the uclibc++ makefiles do print a "File name too long" error, it's not the final error that's printed, so it's a bit confusing: > /bin/sh: 1: > cannot create src/abi/libsupc/<SNIP>_libsupc++.a.dep: File name too long > <SNIP: some other makefile output here> > array_type_info.o: No such file or directory Although OpenWRT 22.03 and current master branch have removed uClib++, I thought I'd make a PR for OpenWRT 21.02, since I encountered it and there seems to be quite a few other people experiencing the same issue. It especially happens when using the SDK, (or when using an encrypted fs) since the pre-packaged SDKs have very long filenames. This patch is already in upstream [1], but has not yet been released. [1]: https://git.busybox.net/uClibc++/commit/?id=6687fc9276fa52defaf8592f2001c19b826aec93 Signed-off-by: Alois Klink <alois@aloisklink.com>
* zlib: backport null dereference fixPetr Štetiar2022-08-092-1/+30
| | | | | | | | | | | | | | The curl developers found test case that crashed in their testing when using zlib patched against CVE-2022-37434, same patch we've backported in commit 7df6795d4c25 ("zlib: backport fix for heap-based buffer over-read (CVE-2022-37434)"). So we need to backport following patch in order to fix issue introduced in that previous CVE-2022-37434 fix. References: https://github.com/curl/curl/issues/9271 Fixes: 7df6795d4c25 ("zlib: backport fix for heap-based buffer over-read (CVE-2022-37434)") Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit f443e9de7003c00a935b9ea12f168e09e83b48cd) (cherry picked from commit 707ec48ab3db6d08bd022df1bc720aee68b3b99d)
* zlib: backport fix for heap-based buffer over-read (CVE-2022-37434)Petr Štetiar2022-08-082-1/+33
| | | | | | | | | | | | | zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader. Fixes: CVE-2022-37434 References: https://github.com/ivd38/zlib_overflow Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 7df6795d4c25447683fd4b4a4813bebcddaea547)
* octeon: add SUPPORTED_DEVICES to er/erlitePaul Spooren2022-07-291-0/+2
| | | | | | | | | | | | | | | | | Using the BOARD_NAME variable results for both er and erlite devices to identify themselfs as `er` and `erlite` (via `ubus call system board`). This is problematic when devices search for firmware upgrades since the OpenWrt profile is actually called `ubnt_edgerouter` and `ubnt_edgerouter-lite`. By adding the `SUPPORTED_DEVICE` a mapping is created to point devices called `er` or `erlite` to the corresponding profile. FIXES: https://github.com/openwrt/asu/issues/348 Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 2a07270180ed0e295d854d6e9e59c78c40549efc)
* ipq806x: Archer VR2600: fix switch ports numberingChristian Lamparter2022-07-231-3/+3
| | | | | | | | | The order of LAN ports shown in Luci is reversed compared to what is written on the case of the device. Fix the order so that they match. Fixes: #10275 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 69ea671320c936e72f554348475eeebcab383b42)
* firmware: intel-microcode: update to 20220510Christian Lamparter2022-07-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * New upstream microcode datafile 20220419 * Fixes errata APLI-11 in Atom E3900 series processors * Updated Microcodes: sig 0x000506ca, pf_mask 0x03, 2021-11-16, rev 0x0028, size 16384 * New upstream microcode datafile 20220510 * Fixes INTEL-SA-000617, CVE-2022-21151: Processor optimization removal or modification of security-critical code may allow an authenticated user to potentially enable information disclosure via local access (closes: #1010947) * Fixes several errata (functional issues) on Xeon Scalable, Atom C3000, Atom E3900 * New Microcodes: sig 0x00090672, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992 sig 0x00090675, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992 sig 0x000906a3, pf_mask 0x80, 2022-03-24, rev 0x041c, size 212992 sig 0x000906a4, pf_mask 0x80, 2022-03-24, rev 0x041c, size 212992 sig 0x000b06f2, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992 sig 0x000b06f5, pf_mask 0x03, 2022-03-03, rev 0x001f, size 212992 * Updated Microcodes: sig 0x00030679, pf_mask 0x0f, 2019-07-10, rev 0x090d, size 52224 sig 0x000406e3, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 106496 sig 0x00050653, pf_mask 0x97, 2021-11-13, rev 0x100015d, size 34816 sig 0x00050654, pf_mask 0xb7, 2021-11-13, rev 0x2006d05, size 43008 sig 0x00050656, pf_mask 0xbf, 2021-12-10, rev 0x4003302, size 37888 sig 0x00050657, pf_mask 0xbf, 2021-12-10, rev 0x5003302, size 37888 sig 0x0005065b, pf_mask 0xbf, 2021-11-19, rev 0x7002501, size 29696 sig 0x000506c9, pf_mask 0x03, 2021-11-16, rev 0x0048, size 17408 sig 0x000506e3, pf_mask 0x36, 2021-11-12, rev 0x00f0, size 109568 sig 0x000506f1, pf_mask 0x01, 2021-12-02, rev 0x0038, size 11264 sig 0x000606a6, pf_mask 0x87, 2022-03-30, rev 0xd000363, size 294912 sig 0x000706a1, pf_mask 0x01, 2021-11-22, rev 0x003a, size 75776 sig 0x000706a8, pf_mask 0x01, 2021-11-22, rev 0x001e, size 75776 sig 0x000706e5, pf_mask 0x80, 2022-03-09, rev 0x00b0, size 112640 sig 0x000806a1, pf_mask 0x10, 2022-03-26, rev 0x0031, size 34816 sig 0x000806c1, pf_mask 0x80, 2022-02-01, rev 0x00a4, size 109568 sig 0x000806c2, pf_mask 0xc2, 2021-12-07, rev 0x0026, size 97280 sig 0x000806d1, pf_mask 0xc2, 2021-12-07, rev 0x003e, size 102400 sig 0x000806e9, pf_mask 0x10, 2021-11-12, rev 0x00f0, size 105472 sig 0x000806e9, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 105472 sig 0x000806ea, pf_mask 0xc0, 2021-11-12, rev 0x00f0, size 105472 sig 0x000806eb, pf_mask 0xd0, 2021-11-15, rev 0x00f0, size 105472 sig 0x000806ec, pf_mask 0x94, 2021-11-17, rev 0x00f0, size 105472 sig 0x00090661, pf_mask 0x01, 2022-02-03, rev 0x0016, size 20480 sig 0x000906c0, pf_mask 0x01, 2022-02-19, rev 0x24000023, size 20480 sig 0x000906e9, pf_mask 0x2a, 2021-11-12, rev 0x00f0, size 108544 sig 0x000906ea, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 104448 sig 0x000906eb, pf_mask 0x02, 2021-11-12, rev 0x00f0, size 105472 sig 0x000906ec, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 104448 sig 0x000906ed, pf_mask 0x22, 2021-11-16, rev 0x00f0, size 104448 sig 0x000a0652, pf_mask 0x20, 2021-11-16, rev 0x00f0, size 96256 sig 0x000a0653, pf_mask 0x22, 2021-11-15, rev 0x00f0, size 97280 sig 0x000a0655, pf_mask 0x22, 2021-11-16, rev 0x00f0, size 96256 sig 0x000a0660, pf_mask 0x80, 2021-11-15, rev 0x00f0, size 96256 sig 0x000a0661, pf_mask 0x80, 2021-11-16, rev 0x00f0, size 96256 sig 0x000a0671, pf_mask 0x02, 2022-03-09, rev 0x0053, size 103424 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 2747a94f0977b36c4c29cc4596879b9127cfaf5f)
* firmware: intel-microcode: update to 20220207Christian Lamparter2022-07-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debian's changelog by Henrique de Moraes Holschuh <hmh@debian.org>: * upstream changelog: new upstream datafile 20220207 * Mitigates (*only* when loaded from UEFI firmware through the FIT) CVE-2021-0146, INTEL-SA-00528: VT-d privilege escalation through debug port, on Pentium, Celeron and Atom processors with signatures 0x506c9, 0x506ca, 0x506f1, 0x706a1, 0x706a8 https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/57#issuecomment-1036363145 * Mitigates CVE-2021-0127, INTEL-SA-00532: an unexpected code breakpoint may cause a system hang, on many processors. * Mitigates CVE-2021-0145, INTEL-SA-00561: information disclosure due to improper sanitization of shared resources (fast-store forward predictor), on many processors. * Mitigates CVE-2021-33120, INTEL-SA-00589: out-of-bounds read on some Atom Processors may allow information disclosure or denial of service via network access. * Fixes critical errata (functional issues) on many processors * Adds a MSR switch to enable RAPL filtering (default off, once enabled it can only be disabled by poweroff or reboot). Useful to protect SGX and other threads from side-channel info leak. Improves the mitigation for CVE-2020-8694, CVE-2020-8695, INTEL-SA-00389 on many processors. * Disables TSX in more processor models. * Fixes issue with WBINDV on multi-socket (server) systems which could cause resets and unpredictable system behavior. * Adds a MSR switch to 10th and 11th-gen (Ice Lake, Tiger Lake, Rocket Lake) processors, to control a fix for (hopefully rare) unpredictable processor behavior when HyperThreading is enabled. This MSR switch is enabled by default on *server* processors. On other processors, it needs to be explicitly enabled by an updated UEFI/BIOS (with added configuration logic). An updated operating system kernel might also be able to enable it. When enabled, this fix can impact performance. * Updated Microcodes: sig 0x000306f2, pf_mask 0x6f, 2021-08-11, rev 0x0049, size 38912 sig 0x000306f4, pf_mask 0x80, 2021-05-24, rev 0x001a, size 23552 sig 0x000406e3, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 105472 sig 0x00050653, pf_mask 0x97, 2021-05-26, rev 0x100015c, size 34816 sig 0x00050654, pf_mask 0xb7, 2021-06-16, rev 0x2006c0a, size 43008 sig 0x00050656, pf_mask 0xbf, 2021-08-13, rev 0x400320a, size 35840 sig 0x00050657, pf_mask 0xbf, 2021-08-13, rev 0x500320a, size 36864 sig 0x0005065b, pf_mask 0xbf, 2021-06-04, rev 0x7002402, size 28672 sig 0x00050663, pf_mask 0x10, 2021-06-12, rev 0x700001c, size 28672 sig 0x00050664, pf_mask 0x10, 2021-06-12, rev 0xf00001a, size 27648 sig 0x00050665, pf_mask 0x10, 2021-09-18, rev 0xe000014, size 23552 sig 0x000506c9, pf_mask 0x03, 2021-05-10, rev 0x0046, size 17408 sig 0x000506ca, pf_mask 0x03, 2021-05-10, rev 0x0024, size 16384 sig 0x000506e3, pf_mask 0x36, 2021-04-29, rev 0x00ec, size 108544 sig 0x000506f1, pf_mask 0x01, 2021-05-10, rev 0x0036, size 11264 sig 0x000606a6, pf_mask 0x87, 2021-12-03, rev 0xd000331, size 291840 sig 0x000706a1, pf_mask 0x01, 2021-05-10, rev 0x0038, size 74752 sig 0x000706a8, pf_mask 0x01, 2021-05-10, rev 0x001c, size 75776 sig 0x000706e5, pf_mask 0x80, 2021-05-26, rev 0x00a8, size 110592 sig 0x000806a1, pf_mask 0x10, 2021-09-02, rev 0x002d, size 34816 sig 0x000806c1, pf_mask 0x80, 2021-08-06, rev 0x009a, size 109568 sig 0x000806c2, pf_mask 0xc2, 2021-07-16, rev 0x0022, size 96256 sig 0x000806d1, pf_mask 0xc2, 2021-07-16, rev 0x003c, size 101376 sig 0x000806e9, pf_mask 0x10, 2021-04-28, rev 0x00ec, size 104448 sig 0x000806e9, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 104448 sig 0x000806ea, pf_mask 0xc0, 2021-04-28, rev 0x00ec, size 103424 sig 0x000806eb, pf_mask 0xd0, 2021-04-28, rev 0x00ec, size 104448 sig 0x000806ec, pf_mask 0x94, 2021-04-28, rev 0x00ec, size 104448 sig 0x00090661, pf_mask 0x01, 2021-09-21, rev 0x0015, size 20480 sig 0x000906c0, pf_mask 0x01, 2021-08-09, rev 0x2400001f, size 20480 sig 0x000906e9, pf_mask 0x2a, 2021-04-29, rev 0x00ec, size 106496 sig 0x000906ea, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 102400 sig 0x000906eb, pf_mask 0x02, 2021-04-28, rev 0x00ec, size 104448 sig 0x000906ec, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424 sig 0x000906ed, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 103424 sig 0x000a0652, pf_mask 0x20, 2021-04-28, rev 0x00ec, size 93184 sig 0x000a0653, pf_mask 0x22, 2021-04-28, rev 0x00ec, size 94208 sig 0x000a0655, pf_mask 0x22, 2021-04-28, rev 0x00ee, size 94208 sig 0x000a0660, pf_mask 0x80, 2021-04-28, rev 0x00ea, size 94208 sig 0x000a0661, pf_mask 0x80, 2021-04-29, rev 0x00ec, size 93184 sig 0x000a0671, pf_mask 0x02, 2021-08-29, rev 0x0050, size 102400 * Removed Microcodes: sig 0x00080664, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 sig 0x00080665, pf_mask 0x01, 2021-02-17, rev 0xb00000f, size 130048 * update .gitignore and debian/.gitignore. Add some missing items from .gitignore and debian/.gitignore. * ucode-blacklist: do not late-load 0x406e3 and 0x506e3. When the BIOS microcode is older than revision 0x7f (and perhaps in some other cases as well), the latest microcode updates for 0x406e3 and 0x506e3 must be applied using the early update method. Otherwise, the system might hang. Also: there must not be any other intermediate microcode update attempts [other than the one done by the BIOS itself], either. It must go from the BIOS microcode update directly to the latest microcode update. * source: update symlinks to reflect id of the latest release, 20220207 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 1753f8c14bc09183492d62bccb8d8e42b5f24e19)
* sdk: add spidev-test to the bundle of userspace sourcesChristian Lamparter2022-07-192-4/+16
| | | | | | | | | | | | | | | moves and extends the current facilities, which have been added some time ago for the the usbip utility, to support more utilites that are shipped with the Linux kernel tree to the SDK. this allows to drop all the hand-waving and code for failed previous attempts to mitigate the SDK build failures. Fixes: bdaaf66e28bd ("utils/spidev_test: build package directly from Linux") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit b479db9062b721776be44b976961a1031c1344ea) (cherry picked from commit eb8d0da88a0dcf7f10f05ad10c48e3a691f5a8d1)
* bcm4908: use upstream-accepted watchdog patchesRafał Miłecki2022-07-182-1/+11
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 864fdf2bf3f4b5c71e57a27c514672b966580148)
* bcm4908: backport latest DT patchesRafał Miłecki2022-07-187-1/+363
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 001856fa51eaa704a254955138f76907eb02c2b4)
* kernel: update leds-bcm63138 driverRafał Miłecki2022-07-183-0/+85
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bb2a2b1dbe9c03d2abbb6989b6c4041e765543b0)
* kernel: backport LEDs driver for BCMBCA devicesRafał Miłecki2022-07-185-0/+499
| | | | | | | This includes BCM63xx and BCM4908 families. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d9ab1e56d8d16182bd292f393c012d7e6873ed89)
* openssl: bump to 1.1.1qDustin Lundquist2022-07-171-2/+2
| | | | | | | | | | | | | | | | | | Changes between 1.1.1p and 1.1.1q [5 Jul 2022] *) AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation would not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. (CVE-2022-2097) [Alex Chernyakhovsky, David Benjamin, Alejandro Sedeño] Signed-off-by: Dustin Lundquist <dustin@null-ptr.net> (cherry picked from commit 3899f68b54b31de4b4fef4f575f7ea56dc93d965)
* mediatek: mt7623: fixes kconfig for hwcryptoChukun Pan2022-07-151-1/+1
| | | | | | | | | | | The MediaTek's Crypto Engine driver has been replaced with the upstream Inside Secure's SafeXcel cryptographic engine driver, however kconfig has not been changed accordingly, this commit fixes it. Fixes: 127ad76 ("mediatek: switch over to extended upstream eip97 driver") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* mediatek: remove crypto-hw-mtk packageEneas U de Queiroz2022-07-151-23/+0
| | | | | | | | The MediaTek's Crypto Engine module is only available for mt7623, in which case it is built into the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 3f2d0703b60357e3ff1865783335be9f51528eb8)
* tools/libressl: update to version 3.4.3Josef Schlehofer2022-07-151-2/+2
| | | | | | | | | | | | | | | | Release notes: https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.4.3-relnotes.txt ``` It includes the following security fix: * A malicious certificate can cause an infinite loop. Reported by and fix from Tavis Ormandy and David Benjamin, Google. (CVE-2022–0778) ``` Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 25534d5cc20a807ff776fdb18847344167ce081d)
* openssl: bump to 1.1.1pAndre Heider2022-07-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes between 1.1.1o and 1.1.1p [21 Jun 2022] *) In addition to the c_rehash shell command injection identified in CVE-2022-1292, further bugs where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection have been fixed. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. (CVE-2022-2068) [Daniel Fiala, Tomáš Mráz] *) When OpenSSL TLS client is connecting without any supported elliptic curves and TLS-1.3 protocol is disabled the connection will no longer fail if a ciphersuite that does not use a key exchange based on elliptic curves can be negotiated. [Tomáš Mráz] Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit eb7d2abbf06f0a3fe700df5dc6b57ee90016f1f1)
* bcm53xx: use -falign-functions=32 for kernel compilationRafał Miłecki2022-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Northstar SoCs have pretty small CPU caches and their performance is heavily affected by cache hits & misses. It means that all kind of random code changes can affect performance as they often reorganize (change alignment & possibly reorder) kernel symbols. It was discussed in ARM / net mailinglists: 1. ARM router NAT performance affected by random/unrelated commits [1] [2] 2. Optimizing kernel compilation / alignments for network performance [3] [4] It seems that -falign-functions can be used as a partial workaround. It doesn't solve all cases (e.g. documented watchdog one [5]) but it surely helps with many of them. A complete long term solution may be PGO (profile-guided optimization) but it isn't available at this point. [1] https://lkml.org/lkml/2019/5/21/349 [2] https://www.spinics.net/lists/linux-block/msg40624.html [3] https://lore.kernel.org/linux-arm-kernel/066fc320-dc04-11a4-476e-b0d11f3b17e6@gmail.com/T/ [4] https://www.spinics.net/lists/netdev/msg816103.html [5] http://lists.openwrt.org/pipermail/openwrt-devel/2022-July/038989.html Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit abc5b28db164dc2d807750cb2baae91e288c84a9)
* bcm53xx: enable & setup packet steeringRafał Miłecki2022-07-082-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Packet steering can improve NAT masquarade performance on Northstar by 40-50%. It makes reaching 940-942 Mb/s possible on BCM4708 (and obviously BCM47094 too). Add scripts setting up the most optimal Northstar setup. Below are testing results for running iperf TCP traffic from LAN to WAN. They were used to pick up golden values. ┌──────────┬──────────┬────────────────────┬────────────────────┐ │ eth0 │ br-lan │ flow_offloading=0 │ flow_offloading=1 │ │ │ ├─────────┬──────────┼─────────┬──────────┤ │ rps_cpus │ rps_cpus │ BCM4708 │ BCM47094 │ BCM4708 │ BCM47094 │ ├──────────┼──────────┼─────────┼──────────┼─────────┼──────────┤ │ 0 │ 0 │ 387 │ 671 │ 707 │ 941 │ │ 0 │ 1 │ 343 │ 576 │ 705 │ 941 │ │ 0 │ 2 │ ✓ 574 │ ✓ 941 │ 704 │ 940 │ │ 1 │ 0 │ 320 │ 549 │ 561 │ 941 │ │ 1 │ 1 │ 327 │ 551 │ 553 │ 941 │ │ 1 │ 2 │ 523 │ ✓ 940 │ 559 │ 940 │ │ 2 │ 0 │ 383 │ 652 │ ✓ 940 │ 941 │ │ 2 │ 1 │ 448 │ 754 │ ✓ 942 │ 941 │ │ 2 │ 2 │ 404 │ 655 │ ✓ 941 │ 941 │ └──────────┴──────────┴─────────┴──────────┴─────────┴──────────┘ Above tests were performed with all eth0 interrupts handled by CPU0. Setting "echo 2 > /proc/irq/38/smp_affinity" was tested on BCM4708 but it didn't increased speeds (just required different steering): ┌──────────┬──────────┬───────────┐ │ eth0 │ br-lan │ flow_offl │ │ rx-0 │ rx-0 │ oading=0 │ │ rps_cpus │ rps_cpus │ BCM4708 │ ├──────────┼──────────┼───────────┤ │ 0 │ 0 │ 384 │ │ 0 │ 1 │ ✓ 574 │ │ 0 │ 2 │ 348 │ │ 1 │ 0 │ 383 │ │ 1 │ 1 │ 412 │ │ 1 │ 2 │ 448 │ │ 2 │ 0 │ 321 │ │ 2 │ 1 │ 520 │ │ 2 │ 2 │ 327 │ └──────────┴──────────┴───────────┘ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit fcbd39689ebfef20c62fe3882d51f3af765e8028)
* bcm53xx: disable GRO by default at kernel levelRafał Miłecki2022-07-081-0/+32
| | | | | | | | | | | This improves NAT masquarade network performance. An alternative to kernel change would be runtime setup but that requires ethtool and identifying relevant network interface and all related switch ports interfaces. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 82d0dd8f8aa11249944fe39cd0d75a1524ec22ec)
* kernel: drop patch adding hardcoded kernel compilation flagsRafał Miłecki2022-07-081-25/+0
| | | | | | | | | | | | | | | | | | | | 1. KCFLAGS should be used for custom flags 2. Optimization flags are arch / SoC specific 3. -fno-reorder-blocks may *worsen* network performace on some SoCs 4. Usage of flags was *reversed* since 5.4 and noone reported that If we really need custom flags then CONFIG_KERNEL_CFLAGS should get default value adjusted properly (per target). Ref: 4e0c54bc5bc8 ("kernel: add support for kernel 5.4") Link: http://lists.openwrt.org/pipermail/openwrt-devel/2022-June/038853.html Link: https://patchwork.ozlabs.org/project/openwrt/patch/20190409093046.13401-1-zajec5@gmail.com/ Cc: Felix Fietkau <nbd@nbd.name> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 22168ae68101b95d03741b0e9e8ad20b8a5ae5b7)
* kernel: support setting extra CFLAGS for kernel compilationRafał Miłecki2022-07-082-1/+5
| | | | | | | They may be used e.g. to optimize kernel size or performance. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 907d7d747243044f86588f0d82993e8c106cb02c)
* kernel: use KCFLAGS for passing EXTRA_OPTIMIZATION flagsRafał Miłecki2022-07-083-11/+4
| | | | | | | | | | This uses kernel's generic variable and doesn't require patching it with a custom Makefile change. It's expected *not* to change any behaviour. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1d42af720c6b6dcfcdd0b89bce386fca1607dcb3) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 24e27bec9a6df1511a504cf04cd9578a23e74657)
* build: fix ldconfig executable error in pythonDamien Mascord2022-07-041-2/+1
| | | | | | | | | | | | | | | | | | | | The empty executable is causing problems with meson builds, due to the error: OSError: [Errno 8] Exec format error: 'ldconfig' This patch changes the empty ldconfig stub to symlink to /bin/true to work around this issue. Fixes: FS#4117 Fixes: 3bd31cc4d2ff ("tools/meson: update to 0.60.0") Signed-off-by: Damien Mascord <tusker@tusker.org> Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl> # Tested on Debian 11 Tested-By: Lucian Cristian <lucian.cristian@gmail.com> Tested-By: Baptiste Jonglez <git@bitsofnetworks.org> Cc: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 6a5b4228e30244b44a49f523dea66caf3fbe3307) Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> [backport to fix prereq check when moving from 22.03 branch to 21.02]
* kernel: Remove kmod-crypto-lib-blake2sHauke Mehrtens2022-07-044-24/+1
| | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Fixes: be0639063a70 ("kernel: bump 5.4 to 5.4.203") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport wireguard blake2s patchHauke Mehrtens2022-07-031-0/+108
| | | | | | | | | This patch was backported to kernel 5.4.200, but without the wireguard change, because wireguard is not available in upstream kernel 5.4. This adds the missing changes for wireguard too. Fixes: be0639063a70 ("kernel: bump 5.4 to 5.4.203") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: move upstreamed DTS files (ESPRESSObin) to files-5.4Adrian Schmutzler2022-07-033-0/+0
| | | | | | | | | | | | | | | | | | | | | Since kernel 5.5-rc1 [1], there are upstreamed DTS files related to ESPRESSObin variants. Move these to files-5.4. This helps if you want to use a newer kernel version than used in OpenWrt 21.02 (= LTS kernel 5.4), you would end up with duplicate files (one outdated, one up to date from newer Linux versions). Fixes: Error: arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts:19.1-7: Label or path ports not found FATAL ERROR: Syntax error parsing input tree [1] https://github.com/torvalds/linux/commit/447b8789359f9a5e6567c4044d18abaa7de68930 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 7be8ab4f7b582924bca6594103735d888989d804) Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [reword commit subject and commit description]
* cryptodev-linux: update to 1.12Rosen Penev2022-07-032-35/+3
| | | | | | | | | Remove upstream backport. Use AUTORELEASE for simplicity. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 585cef5f1a9c1c3aecd7d231364618e96d03ab65)
* kernel: check dst of flow offloading tableRitaro Takenaka2022-07-038-22/+119
| | | | | | | Flow offload dst can become invalid after the route cache is created. dst_check() in packet path is necessary to prevent packet drop. Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
* openssl: bump to 1.1.1oEneas U de Queiroz2022-07-032-6/+6
| | | | | | | | | | | This release comes with a security fix related to c_rehash. OpenWrt does not ship or use it, so it was not affected by the bug. There is a fix for a possible crash in ERR_load_strings() when configured with no-err, which OpenWrt does by default. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 7a5ddc0d06895bde7538d78c8dad2c863d70f946)
* kernel: bump 5.4 to 5.4.203Hauke Mehrtens2022-07-03109-1414/+262
| | | | | | | | | | | | | | | Merged upstream: bcm27xx/patches-5.4/950-1014-Revert-mailbox-avoid-timer-start-from-callback.patch generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch Manually adapted: layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch oxnas/patches-5.4/100-oxnas-clk-plla-pllb.patch Compile-tested: lantiq/xrx200 Run-tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* exfat: update to 5.19.1Chukun Pan2022-07-011-2/+2
| | | | | | | | | | | | | | | | | | | Major changes are: 4 cleanups & typos fixes. Add keep_last_dots mount option to allow access to paths with trailing dots. Avoid repetitive volume dirty bit set/clear to improve storage life time. Fix ->i_blocks truncation issue caused by wrong 32bit mask. Fix ->i_blocks truncation issue that still exists elsewhere. Fix missing REQ_SYNC in exfat_update_bhs(). Fix referencing wrong parent directory information during rename. Fix slab-out-bounds in exat_clear_bitmap() reported from syzbot. Improve performance while zeroing a cluster with dirsync mount option. Introduce a sys_tz mount option to use system timezone. Move super block magic number to magic.h Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ramips: fix booting on ZyXEL NBG-419N v2Piotr Dymacz2022-06-201-0/+1
| | | | | | | | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of other devices from 'ramips' target. Fixes: #9842 Fixes: #8964 Reported-by: Juergen Hench <jurgen.hench@gmail.com> Tested-by: Juergen Hench <jurgen.hench@gmail.com> Signed-off-by: Demetris Ierokipides <ierokipides.dem@gmail.com> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit fd72e595c2b2a46bab8cbc7e9415fbfeae7b5b0d)
* ramips: fix RT-AC57U button levelDavid Bauer2022-06-181-1/+1
| | | | | | | | Both buttons on the RT-AC57U are active-low. Fix the GPIO flag for the WPS cutton to fix button behavior. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 535b0c70b1c466733b009144f81f5207f1ecd311)
* kernel: bump 5.4 to 5.4.194Hauke Mehrtens2022-05-189-13/+13
| | | | | | | Compile-tested: lantiq/xrx200, armvirt/64 Run-tested: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.192Hauke Mehrtens2022-05-1811-21/+21
| | | | | | | Compile-tested: armvirt/64 Run-tested: armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.191Hauke Mehrtens2022-05-1860-219/+113
| | | | | | | | | | | | | | | | Merged upstream: apm821xx/patches-5.4/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch Similar patch merged upstream: bcm27xx/patches-5.4/950-0210-usb-xhci-Disable-the-XHCI-5-second-timeout.patch Manually adapted: layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch Compile-tested: armvirt/64 Run-tested: armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* firewall: config: remove restictions on DHCPv6 allow ruleTiago Gaspar2022-05-042-4/+2
| | | | | | | | | | | | | | | Remove restrictions on source and destination addresses, which aren't specified on RFC8415, and for some reason in openwrt are configured to allow both link-local and ULA addresses. As cleared out in issue #5066 there are some ISPs that use Gloabal Unicast addresses, so fix this rule to allow them. Fixes: #5066 Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com> [rebase onto firewall3, clarify subject, bump PKG_RELEASE] Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit 65258f5d6093809c541050256646795bc0a460a9)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 16:30:51 +0000