aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* bcm53xx: enable Linksys EA6300 & EA9200 buildsRafał Miłecki2021-12-131-3/+0
| | | | | | | | | | | Both should be supported since: 1. Adding NVMEM driver for NVRAM 2. Using NVRAM info for determining active firmware partition Linksys EA9500 uses very similar design and works fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 287257d676b1120f388120f1dc259e4eefd3b163)
* bcm53xx: backport the latest upstream DT changesRafał Miłecki2021-12-136-1/+386
| | | | | | | | | This includes: 1. BCM5301X changes from 5.14 and queued 5.15 stuff 2. NSP changes from 5.11 - 5.15 for kernel 5.10 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b)
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-12-131-1/+1
| | | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 53546c3e945f5a0a8f8c62311f48c6f21c9ab0a8)
* otrx: update to the latest masterRafał Miłecki2021-12-131-3/+3
| | | | | | | | | | | 56e8e19 otrx: support TRX from stdin when extracting a37ccaf otrx: support unsorted partitions offsets 1fa145e otrx: extract shared code opening & parsing TRX format 4ecefda otrx: allow validating TRX from stdin cf01e69 otrx: avoid unneeded fseek() when calculating CRC32 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 942facd14f0a13fa3aeb4238d866e764f5caec8c)
* otrx: use firmware-utils.git to avoid code duplicationRafał Miłecki2021-12-133-603/+10
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7c4d79aa1c3595e2be36d1449cf63404f301f748)
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-12111-847/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for Xiaomi AIoT Router AC2350Evgeniy Isaev2021-12-125-1/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device specifications * SoC: QCA9563 @ 775MHz (MIPS 74Kc) * RAM: 128MiB DDR2 * Flash: 16MiB SPI-NOR (EN25QH128) * Wireless 2.4GHz (SoC): b/g/n, 3x3 * Wireless 5Ghz (QCA9988): a/n/ac, 4x4 MU-MIMO * IoT Wireless 2.4GHz (QCA6006): currently unusable * Ethernet (AR8327): 3 LAN × 1GbE, 1 WAN × 1GbE * LEDs: Internet (blue/orange), System (blue/orange) * Buttons: Reset * UART: through-hole on PCB ([VCC 3.3v](RX)(GND)(TX) 115200, 8n1) * Power: 12VDC, 1,5A MAC addresses map (like in OEM firmware) art@0x0 88:C3:97:*:57 wan/label art@0x1002 88:C3:97:*:2D lan/wlan2g art@0x5006 88:C3:97:*:2C wlan5g Obtain SSH Access 1. Download and flash the firmware version 1.3.8 (China). 2. Login to the router web interface and get the value of `stok=` from the URL 3. Open a new tab and go to the following URL (replace <STOK> with the stok value gained above; line breaks are only for easier handling, please put together all four lines into a single URL without any spaces): http://192.168.31.1/cgi-bin/luci/;stok=<STOK>/api/misystem/set_config_iotdev ?bssid=any&user_id=any&ssid=-h%0Anvram%20set%20ssh_en%3D1%0Anvram%20commit %0Ased%20-i%20%27s%2Fchannel%3D.%2A%2Fchannel%3D%5C%5C%22debug%5C%5C%22%2F g%27%20%2Fetc%2Finit.d%2Fdropbear%0A%2Fetc%2Finit.d%2Fdropbear%20start%0A 4. Wait 30-60 seconds (this is the time required to generate keys for the SSH server on the router). Create Full Backup 1. Obtain SSH Access. 2. Create backup of all flash (on router): dd if=/dev/mtd0 of=/tmp/ALL.backup 3. Copy backup to PC (on PC): scp root@192.168.31.1:/tmp/ALL.backup ./ Tip: backup of the original firmware, taken three times, increases the chances of recovery :) Calculate The Password * Locally using shell (replace "12345/E0QM98765" with your router's serial number): On Linux printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5sum - | head -c8 && echo On macOS printf "%s6d2df50a-250f-4a30-a5e6-d44fb0960aa0" "12345/E0QM98765" | \ md5 | head -c8 * Locally using python script (replace "12345/E0QM98765" with your router's serial number): wget https://raw.githubusercontent.com/eisaev/ax3600-files/master/scripts/calc_passwd.py python3.7 -c 'from calc_passwd import calc_passwd; print(calc_passwd("12345/E0QM98765"))' * Online https://www.oxygen7.cn/miwifi/ Debricking (lite) If you have a healthy bootloader, you can use recovery via TFTP using programs like TinyPXE on Windows or dnsmasq on Linux. To switch the router to TFTP recovery mode, hold down the reset button, connect the power supply, and release the button after about 10 seconds. The router must be connected directly to the PC via the LAN port. Debricking You will need a full dump of your flash, a CH341 programmer, and a clip for in-circuit programming. Install OpenWRT 1. Obtain SSH Access. 2. Create script (on router): echo '#!/bin/sh' > /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo '. /bin/boardupgrade.sh' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh echo 'board_prepare_upgrade' >> /tmp/flash_fw.sh echo 'mtd erase rootfs_data' >> /tmp/flash_fw.sh echo 'mtd write /tmp/openwrt.bin firmware' >> /tmp/flash_fw.sh echo 'sleep 3' >> /tmp/flash_fw.sh echo 'reboot' >> /tmp/flash_fw.sh echo >> /tmp/flash_fw.sh chmod +x /tmp/flash_fw.sh 3. Copy `openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin` to the router (on PC): scp openwrt-ath79-generic-xiaomi_aiot-ac2350-squashfs-sysupgrade.bin \ root@192.168.31.1:/tmp/openwrt.bin 4. Flash OpenWRT (on router): /bin/ash /tmp/flash_fw.sh & 5. SSH connection will be interrupted - this is normal. 6. Wait for the indicator to turn blue. Signed-off-by: Evgeniy Isaev <isaev.evgeniy@gmail.com> [improve commit message formatting slightly] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6c148116f778bfd2db88476cee4753b32538eafe)
* ramips: fix tl-mr3020-v3 switch topology to configure vlans via luciSergey V. Lobanov2021-12-051-1/+4
| | | | | | | | | | | Currently it is not possible to configure VLANs via LUCI on tplink tl-mr3020-v3. This patch fixes switch topology for the LUCI interface. Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in> [copied commit message from github PR] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit e22c91e144d63ccbd7b76b370a53652c48db1d6f)
* busybox: update to 1.33.2 bugfix releaseHannu Nyman2021-12-041-2/+2
| | | | | | | | | | | Update busybox to 1.33.2, which includes only 5 commits after 1.33.1 Bug fix release. 1.33.2 has fixes for hush and ash (parsing fixes) and unlzma (fix where we could read before beginning of buffer). https://git.busybox.net/busybox/log/?h=1_33_2 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* mt76: update to the latest versionFelix Fietkau2021-12-031-3/+3
| | | | | | | | | | 71e08471ab56 mt76: eeprom: fix return code on corrected bit-flips 9a8fc6636d83 mt76: move sar_capa configuration in common code 7cdbea1dc82a mt76: only access ieee80211_hdr after mt76_insert_ccmp_hdr 678071ef7029 mt76: mt7615: clear mcu error interrupt status on mt7663 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit fc4398fe71810f3bb5637bdfd0b3975a8ec858f0)
* mac80211: bump PKG_RELEASEFelix Fietkau2021-12-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx aggregation locking issueFelix Fietkau2021-12-021-0/+79
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit a1a71a71999001502fa86136dbf8925da8341098)
* mac80211: fix queue assignment of aggregation start requestsFelix Fietkau2021-12-021-0/+28
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 15d8c7aa74c202c530dbd53e53b00e418f0b64f4)
* mt76: update to the latest versionFelix Fietkau2021-12-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | a6451fea5a3d mt76: mt7615: improve wmm index allocation 1911486414dc mt76: mt7915: improve wmm index allocation 7998a41d1321 mt76: clear sta powersave flag after notifying driver 664475574438 mt76: mt7603: introduce SAR support 5c0da39c940b mt76: mt7915: introduce SAR support 77fc6c439a32 mt76: mt7603: improve reliability of tx powersave filtering 094b3d800835 firmware: update mt7663 rebb firmware to 20200904171623 25237b19bcc1 mt76: eeprom: tolerate corrected bit-flips 1463cb4c6ac2 mt76: mt7921: fix boolreturn.cocci warning 586bad6020f7 mt76: mt7921: use correct iftype data on 6GHz cap init 8ec95c910425 mt76: mt7921s: fix bus hang with wrong privilege 688e30c7d854 firmware: update mt7921 firmware to version 20211014 6fad970893dd mt76: fix key pointer overwrite in mt7921s_write_txwi/mt7663_usb_sdio_write_txwi 95acf972750c mt76: fix 802.3 RX fail by hdr_trans 3f402b0cf6c0 mt76: mt7921s: fix possible kernel crash due to invalid Rx count 929a03a8d65d mt76: connac: fix last_chan configuration in mt76_connac_mcu_rate_txpower_band Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 7e153900566ec1aebdc4f15f5a9d9ff9b9401cc1)
* uboot-lantiq: danube: fix hanging lzma kernel uncompression #2Mathias Kresin2021-11-271-0/+9
| | | | | | | Follow up to commit c744798cad6a13436f2ba9dd3a280cb16d315c85. Managed to hit the very same issue again while playing with the NOR SPL builds. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: set maximum kernel size for P2812HNUF3Mathias Kresin2021-11-271-0/+2
| | | | | | | | | | | The board has a fixed size kernel partition but do not limit the kernel size during image building. Disable image building for both boards as well, since the kernel of the last release as well as master are to big to fit into the 2 MByte kernel partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: backport fix for dealing with stripped IV on rxFelix Fietkau2021-11-263-11/+37
| | | | | | | This fixes potental rx drop issues Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 68189835ac81779f9cf21060dca0c54dcdb0c0a6)
* hostapd: add a patch that allows processing auth requests for peers in ↵Felix Fietkau2021-11-245-9/+43
| | | | | | | | | | | | | | | | blocked state If authentication fails repeatedly e.g. because of a weak signal, the link can end up in blocked state. If one of the nodes tries to establish a link again before it is unblocked on the other side, it will block the link to that other side. The same happens on the other side when it unblocks the link. In that scenario, the link never recovers on its own. To fix this, allow restarting authentication even if the link is in blocked state, but don't initiate the attempt until the blocked period is over. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f84053af5c0b0a159ea4d3e90b0c06574b4fde8d)
* hostapd: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: bump PKG_RELEASEFelix Fietkau2021-11-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add a fix for kernel warnings when forwarding packets in mesh modeFelix Fietkau2021-11-243-11/+73
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d439c7d85a05c3548e5566bec292292a4f6b7ef5)
* mac80211: fix regression in SSN handling of addba txFelix Fietkau2021-11-242-2/+46
| | | | | | | | | Some drivers that do their own sequence number allocation (e.g. ath9k, mwlwifi) rely on being able to modify params->ssn on starting tx ampdu sessions. This was broken by a change that modified it to use sta->tid_seq[tid] instead. Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ddd977fcc5838eb6bfb6cb9dad99dfe09a8ff67e)
* hostapd: fix goto loop for ubus assoc handlerDavid Bauer2021-11-231-5/+5
| | | | | | | | | | When a ubus event handler denies a association with a non-zero return value, the code jumps to preceeding code, creating an endless loop until the event handler accepts the assc request. Move the ubus handler further up the code to avoid creating such a loop. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: enable ht40 in wpa_supplicant when using wider HE modesFelix Fietkau2021-11-231-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit c26d741d07632451337810aaecd500a0b3cbf44f)
* hostapd: add support for providing vendor specific IE elementsFelix Fietkau2021-11-231-1/+4
| | | | | | | They can be added as hex digit strings via the 'vendor_elements' option Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 1818b038d7275273adbd525b5ee76bc60b7d628c)
* hostapd: add eap_server supportJohn Crispin2021-11-231-4/+21
| | | | | | | | This makes it possible to avoid using a RADIUS server for WPA enterprise authentication Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from 98621c97822eb20a80ab2248a253972051ea6f08)
* hostapd: add default values for r0kh/r1khFelix Fietkau2021-11-231-0/+7
| | | | | | | | This allows WPA enterprise roaming in the same mobility domain without any manual key configuration (aside from radius credentials) Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 704ab6a002172e76d41612f6d07ff179ef035d10)
* hostapd: add support for configuring the beacon rateFelix Fietkau2021-11-231-1/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 46509a51dd63aa49648ad0f130461817f43532d0)
* hostapd: add support for configuring rts thresholdFelix Fietkau2021-11-231-1/+4
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 26da5c235983d215a42983467149e0e5597e8de2)
* hostapd: fix use after free bugsDavid Bauer2021-11-231-6/+6
| | | | | | | | Using a pointer one lifter after it freed is not the best idea. Let's not do that. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry-picked from commit 63c01ad025981eaa841353dc0fc27e5017febe21)
* hostapd: add wmm qos map set by defaultFelix Fietkau2021-11-231-1/+6
| | | | | | | | | | | This implements the mapping recommendations from RFC8325, with an update from RFC8622. This ensures that DSCP marked packets are properly sorted into WMM classes. The map can be disabled by setting iw_qos_map_set to something invalid like 'none' Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit a5e3def1822431ef6436cb493df77006dbacafd6)
* hostapd: support qos_map_set without CONFIG_INTERWORKINGFelix Fietkau2021-11-231-0/+112
| | | | | | | This feature is useful on its own even without full interworking support Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit efff3520f4d8fe131c4bd54bb2e098139a7efa4d)
* hostapd: refresh patchesFelix Fietkau2021-11-2314-45/+35
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix a race condition on adding AP mode wds sta interfacesFelix Fietkau2021-11-233-4/+26
| | | | | | | | | | | | Both hostapd and netifd attempt to add a VLAN device to a bridge. Depending on which one wins the race, bridge vlan settings might be incomplete, or hostapd might run into an error and refuse to service the client. Fix this by preventing hostapd from adding interfaces to the bridge and instead rely entirely on netifd handling this properly Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit da4be02fcd5d642954b1c9d9855d9e8d1e6205f4) (cherry-picked from commit 63c01ad025981eaa841353dc0fc27e5017febe21)
* hostapd: fix max_oper_chwidth setting for HEFelix Fietkau2021-11-231-3/+3
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 2319cf4ec048e50a7d3885d19dc27663b45e258d)
* hostapd: let netifd set bridge port attributes for snoopingFelix Fietkau2021-11-231-1/+30
| | | | | | | Avoids race conditions on bridge member add/remove Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 17d19a7d4398789ae8da3daf8e0db167d58b0782)
* hostapd: respect fixed channel BW in HE20 modeJesus Fernandez Manzano2021-11-231-1/+1
| | | | | | | | | When using htmode 'HE20' with a radio mode that uses wpa-supplicant (like mesh or sta), it will default to 40 MHz bw if disable_ht40 is not set. This commit fixes this behaviour. Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net> (cherry-picked from commit af83e3ce0ff40dcecbe913676343bf86846294f7)
* hostapd: make proxyarp work with libnl-tinyFelix Fietkau2021-11-231-0/+275
| | | | | | | Remove a dependency on libnl3-route Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit ae1c5d0d6af60d0467899f5730a2f01aa72137f7)
* hostapd: fix a segfault on sta disconnect with proxy arp enabledFelix Fietkau2021-11-231-0/+19
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 5dd1bd5b80feb2dbaad8bdf93779acad74ed199a)
* hostapd: make the snooping interface (for proxyarp) configurableFelix Fietkau2021-11-232-0/+38
| | | | | | | | | Use the VLAN interface instead of the bridge, to ensure that hostapd receives untagged DHCP packets Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 7b46377a0cd9d809a3c340358121de77f005d4cc) (cherry-picked from commit f1b98fa4fa8a86a9daf2a7177235f28cbd7c53ef)
* hostapd: configure inter-AP communication interface for 802.11rFelix Fietkau2021-11-232-0/+39
| | | | | | | | In setups using VLAN bridge filtering, hostapd may need to communicate using a VLAN interface on top of the bridge, instead of using the bridge directly Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 305c1b8d746b363f655c2f8d5a6497cca10a5d4e)
* hostapd: add additional radius optionsJohn Crispin2021-11-231-2/+17
| | | | | | | | | | - add functionality to configure RADIUS NAS-Id and Operator-Name - add functionality to configure RADIUS accounting interval - enable RADIUS "Chargeable User Identity" Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 3bd6c8c728e72444bdf23b8904ef9c52ebb46bb7)
* hostapd: add extra options for hotspot 2.0 / interworkingFelix Fietkau2021-11-231-4/+25
| | | | | | Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit c76f1d8330c679774eb568a423feb57d956b3ca4)
* hostapd: fix civic location optionJohn Crispin2021-11-231-1/+1
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry-picked from commit 937dd79e2a4457a316d67b3091f6da7d14a99168)
* hostapd: enable airtime policy for the -basic variantsRui Salvaterra2021-11-231-1/+1
| | | | | | | | | | | | | | | Airtime policy configuration is extremely useful in multiple BSS scenarios. Since nowadays most people configure both private and guest networks (at least), it makes sense to enable it by default, except for the most limited of the variants. Size of the hostapd-basic-openssl binary (mipsel 24Kc -O2): 543944 bytes (airtime policy disabled) 548040 bytes (airtime policy enabled) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org> (cherry-picked from commit d38f4565828264731f2a9cfe646491fba80315d3)
* hostapd: add patch for disabling automatic bridging of vlan interfacesFelix Fietkau2021-11-232-3/+40
| | | | | | | | netifd is responsible for handling that, except if the vlan bridge was provided by the config Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit cf45caeff16256f9db777e0e652ec3a38cd476a4)
* mt76: update to the latest versionFelix Fietkau2021-11-235-167/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 624c681ef0c6 mt76: mt7921: enable VHT BFee capability a27dfcb63ccf mt76: connac: fix UC entry is being overwritten 6b691e62470e mt76: connac: add mt76_connac_power_save_sched in mt76_connac_pm_unref b14365bea586 mt76: mt7921: wake the device before dumping power table 82af16bddfc0 mt76: mt7921: make mt7921_set_channel static b24598b1c1a9 mt76: connac: add mt76_connac_mcu_get_nic_capability utility routine 5954e3381ff9 mt76: testmode: move chip-specific stats dump before common stats fd5b612f9aa4 mt76: mt7915: fix rx fcs error count in testmode d9d26a294f7b mt76: connac: fix the maximum interval schedule scan can support ed39c882f388 mt76: reduce rx buffer size to 2048 60f3d3adbba6 mt76: move mt76_get_next_pkt_id in mt76.h 67ed4d902c84 mt76: connac: check band caps in mt76_connac_mcu_set_rate_txpower 23c6ec49c000 mt76: make mt76_update_survey() per phy 5ca602fb9455 mt76: mt7915: introduce mt7915_mcu_set_txbf() c13df42282e9 mt76: mt7915: improve MU stability dee7dcddcaa0 mt76: use SPDX header file comment style 6fbd47153b3d mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode 1b97dd1762ca mt76: mt7921: fix sta_state incorrect implementation 1b89053b5a6f mt76: mt7921: improve code readability for mt7921_update_txs 126649816785 mt76: mt7921: limit txpower according to userlevel power a5163ac09be2 mt76: mt7921: introduce dedicated control for deep_sleep e47c04db4d7e mt76: mt7921: fix kernel warning when reset on vif is not sta 063d3611662c mt76: mt7921: fix the coredump is being truncated 12bf28feba7c mt76: fix iv and CCMP header insertion 949327e76ee4 mt76: disable TWT capabilities for the moment 3530254c1bc9 mt76: mt7921: enable HE BFee capability 599e35f5d9b8 mt76: sdio: do not run mt76_txq_schedule directly 3b6d30c28946 mt76: mt7663s: rely on pm reference counting 529d55a79088 mt76: mt7663s: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path ef44ff116ee2 mt76: mt7663s: enable runtime-pm 3a71e71a555e mt76: mt7615: set macwork timeout according to runtime-pm 925d96e443a4 mt76: mt7921: allow chip reset during device restart 63b114d84361 mt76: mt76x0e: fix device hang during suspend/resume 7f5ea5e2fd10 mt7915: check return code of sysfs_create_link ca64a36908b7 mt76: fix mt76_rates for the multiple devices f517116bf14c mt76: add mt76_default_basic_rate more devices can rely on 6c70b0100513 mt76: mt7921: fix mgmt frame using unexpected bitrate c00a9a6b52af mt76: mt7915: fix mgmt frame using unexpected bitrate 0e4089949565 mt76: mt7921: fix endianness in mt7921_mcu_tx_done_event 55f314120ef2 mt76: mt7921: avoid unnecessary spin_lock/spin_unlock in mt7921_mcu_tx_done_event 541cd3276488 mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skb 817761e87c4f mt76: mt7921: fix endianness warning in mt7921_update_txs b8eca74bbd7b mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi 5e5e07f0def3 mt76: mt7915: fix potential overflow of eeprom page index abda4cded420 mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal() 535899f81a46 mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameter adfa1b9a3ca0 mt76: connac: fix mt76_connac_gtk_rekey_tlv usage 2a65b105ea4a mt76: mt7921: enable aspm by default c57158c82804 mt76: fix build error implicit enumeration conversion 41f607cab83c mt76: mt7921: fix survey-dump reporting 25b4f885a937 mt76: mt76x02: fix endianness warnings in mt76x02_mac.c e63fadb87fe1 mt76: mt7915: report HE MU radiotap 135ef3e9827a mt76: mt7915: adapt new firmware to update BA winsize for Rx session 7118eacb7ce4 mt76: mt7921: add .set_sar_specs support f1f6569da408 mt76: mt7915: fix an off-by-one bound check f7da39467965 mt76 mt7915: take RCU read lock when calling ieee80211_bss_get_elem() 87af8e5c72b1 mt76: mt7915: cleanup -Wunused-but-set-variable 8e2d383fbd92 mt76: mt7915: report tx rate directly from tx status ddce30977591 mt76: mt7915: remove mt7915_sta_stats 4ccd42029519 mt76: mt7921: introduce testmode support bbebea7d6dc6 Revert "mt76: fix mt76_rates for the multiple devices" 74dedf9352c5 mt76: mt7615: fix skb use-after-free on mac reset 7201290eda43 mt76: mt7921: Fix out of order process by invalid event pkt ca1b57e9971a mt76: mt7915: add a missing HT flag for GI parsing 4932c5d80153 of: net: pass the dst buffer to of_get_mac_address() 51d9eb3e6f52 mt76: mt7915: fix endianness warnings in mu radiotap 833ca13014ab mt76: mt7921: Add mt7922 support 8f8ed44d026e mt76: mt7915: add control knobs for thermal throttling 16f18bab6b11 mt76: mt7915: send EAPOL frames at lowest rate affea639c586 mt76: mt7921: send EAPOL frames at lowest rate ac00fed412d4 mt76: mt7915: fix potential overflow of eeprom page index [update] e576ddb76dfa mt76: mt7915: switch proper tx arbiter mode in testmode 222847c3d5eb mt76: mt7915: fix bit fields for HT rate idx d04814366c83 mt76: add support for setting mcast rate 4602acc9271a mt76: mt7921: fix dma hang in rmmod ec2cf3bf96fd mt76: connac: fix GTK rekey offload failure on WPA mixed mode 2fdb9d621431 mt76: connac: add support for limiting to maximum regulatory Tx power 489ace63d42c mt76: mt7921: get rid of monitor_vif 22da8d28fcc8 mt76: mt7921: get rid of mt7921_mac_set_beacon_filter c94130519786 mt76: mt7921: introduce mt7921_mcu_set_beacon_filter utility routine 51cff39d7ad3 mt76: overwrite default reg_ops if necessary da11c1c6edef mt76: mt7615: move mt7615_mcu_set_p2p_oppps in mt76_connac module 47f50b0aa4b8 mt76: mt7921: report HE MU radiotap 4f48ba4b0254 mt76: mt7915: checkpatch cleanup bc7ee7d7bdea mt76: mt7915: add HE-LTF into fixed rate command 6a19e40820aa mt76: mt7921: continue to probe driver when fw already downloaded 8b3d8e2de084 mt76: mt7921: fix firmware usage of RA info using legacy rates 17305a54b166 mt76: mt7921: fix kernel warning from cfg80211_calculate_bitrate 801c15577293 mt76: mt7921: fix endianness warnings in mt7921_mac_decode_he_mu_radiotap 0182a5b99a7a mt76: mt7915: update mac timing settings e2ee9d0a33ed mt76: use IEEE80211_OFFLOAD_ENCAP_ENABLED instead of MT_DRV_AMSDU_OFFLOAD fa6504aceb4f Revert "mt76: mt7915: checkpatch cleanup" 56b842b72a72 mt76: mt7915: fix wmm index on DBDC cards 8044311f5de5 mt76: mt7915: fix potential NPE in TXS processing 28da4baec7c5 mt76: mt7915: fix he_mcs capabilities for 160mhz f7088ebe7452 mt76: mt7915: add LED support ee019046284d mt76: mt7915: introduce bss coloring support 9848094e4bb5 mt76: mt7921: Fix fall-through warning for Clang 5710d0643418 mt76: add a bound check in mt76_calculate_default_rate() a509cf2b654e mt76: mt7921: move mt7921_queue_rx_skb to mac.c 5a0f2382fcfe mt76: mt7915: rework debugfs queue info 62ffc31f4d7b mt76: mt7915: rename debugfs tx-queues 4750b5c918e5 mt76: mt7921: always wake device if necessary in debugfs ac6adf74b3f2 mt76: mt7921: update mib counters dumping phy stats eb75b9266ce6 net:wireless:mt76: fix boolreturn.cocci warnings d7c4698435b3 mt76: mt7921: fix the inconsistent state between bind and unbind 9dcfba3169c4 mt76: switch from 'pci_' to 'dma_' API d8b5e42c9a73 mt76: fill boottime_ns in Rx path 8ee6446075f2 mt76: disable BH around napi_schedule() calls e17d730bf2f6 mt76: mt7915: add LED support [update to v3] 80fe40c9457e mt76: mt7915: enable configured beacon tx rate c8f0d1d81d05 mt76: mt7915: fix hwmon temp sensor mem use-after-free 3b9ba7e02076 mt76: mt7615: fix hwmon temp sensor mem use-after-free 5e82eceb45cb mt76: mt7921: start reworking tx rate reporting eb66b5c9ff77 mt76: mt7921: add support for tx status reporting c8010f170e76 mt76: mt7921: report tx rate directly from tx status 4dc7f3db572b mt76: mt7921: remove mcu rate reporting code db89c6f86724 mt76: mt7921: remove mt7921_sta_stats 6bb8b4267dbe mt76: move spin_lock_bh to spin_lock in tasklet 0eacf41985da mt76: mt7915: honor all possible error conditions in mt7915_mcu_init() 4dfff296ee6e mt76: mt7915: fix possible infinite loop release semaphore 537ed88dd2d0 mt76: mt7921: robustify hardware initialization flow e0b846159221 mt76: mt7921: fix retrying release semaphore without end c55dedcea268 mt76: mt7915: add ethtool stats support d1d5e8cd3a3e mt76: mt7915: add tx stats gathered from tx-status callbacks 1687189d68b7 mt76: mt7915: add some per-station tx stats to ethtool f4dde5f765af mt76: mt7915: add tx mu/su counters to mib 9752bf0643c9 mt76: mt7915: add more MIB registers 4727415017c9 mt76: mt7915: add mib counters to ethtool stats 4ca80a749e7f mt76: connac: set 6G phymode in mt76_connac_get_phy_mode{,v2} 3f2a5d39631e mt76: connac: enable 6GHz band for hw scan 817a41826bd7 mt76: connac: add 6GHz support to mt76_connac_mcu_set_channel_domain a6ab81c21080 mt76: connac: set 6G phymode in single-sku support ca4f47028a44 mt76: connac: add 6GHz support to mt76_connac_mcu_sta_tlv d2e192ea81e2 mt76: connac: add 6GHz support to mt76_connac_mcu_uni_add_bss c3dd12b4c8ae mt76: connac: enable hw amsdu @ 6GHz 91ed2b256c20 mt76: add 6GHz support de8c4f92621f mt76: mt7921: add 6GHz support f143aedc1d57 mt76: introduce packet_id idr bcc8d9e03a5d mt76: remove mt76_wcid pointer from mt76_tx_status_check signature ccbd84763153 mt76: substitute sk_buff_head status_list with spinlock_t status_lock 69bb59df894c mt76: schedule status timeout at dma completion 03a992645310 mt76: support reading EEPROM data embedded in fdt 75615480b3fe mt76: introduce __mt76_mcu_send_firmware routine e8e2eae41f94 mt76: drop MCU header size from buffer size in __mt76_mcu_send_firmware 4c455e8b1a20 mt76: mt7915: introduce __mt7915_get_tsf routine 9d49c611a2d7 mt76: mt7915: introduce mt7915_mcu_twt_agrt_update mcu command f44ca79c9aed mt76: mt7915: introduce mt7915_mac_add_twt_setup routine 2f9555a2f18f mt76: mt7915: enable twt responder capability 440e2db8d541 mt76: mt7915: add twt_stats knob in debugfs eb5f640f8afa mt76: debugfs: improve queue node readability 53d7eb3b4884 mt76: mt7615: fix monitor mode tear down crash 2aa3d4414826 mt76: mt7921: add delay config for sched scan 47e8e96e8e4d mt76: use a separate CCMP PN receive counter for management frames 5560b08f8e2d mt76: do not access 802.11 header in ccmp check for 802.3 rx skbs 1af0242d1241 mt76: mt7915: replace a 64 bit divsion with a call to div_u64_rem 83598c2e872f mt76: avoid possible infinite loop in mt76_tx_status_check ebf5b2336591 mt7615/mt7915: fix hwmon device name 8d12f9ed275d mt76: mt7615: mt7622: fix ibss and meshpoint e7883cdc0b4e mt76: mt7915: improve code readability in mt7915_mcu_sta_bfer_ht 831d5967abb9 wireless: fix spelling of A-MSDU in HE capabilities f09cb04be261 wireless: align some HE capabilities with the spec 0eeba8f2952d wireless: align HE capabilities A-MPDU Length Exponent Extension 655a6c65b8a7 mt76: mt7915: introduce mt7915_mcu_beacon_check_caps() 4440025d0ba9 mt76: mt7915: fix txbf starec TLV issues 87d2fb6fbff5 mt76: mt7915: improve starec readability of txbf 53c6a3cb7f6b mt76: mt7915: fix sta_rec_wtbl tag len f517845e4f28 mt76: mt7915: rework starec TLV tags 1df017bc39a3 mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req() 6724b0a9a748 mt76: mt7915: set VTA bit in tx descriptor f1f505cbbb30 mt76: mt7915: set muru platform type 8c9d4b38d258 mt76: mt7915: remove dead code in mt7915_get_et_stats d0ccc4297935 mt76: rely on phy pointer in mt76_register_debugfs_fops routine signature 0af0af82bb97 mt76: mt7915: introduce mt76 debugfs sub-dir for ext-phy 10e85d62f213 mt76: mt7915: improve code readability for xmit-queue handler b6051f7713d2 mt76: sdio: export mt76s_alloc_rx_queue and mt76s_alloc_tx routines 9a97c38a309d mt76: mt7921: get rid of unused variable in mt7921_tx_complete_skb c02847c05884 mt76: mt7921: get rid of unused variable in mt7921_mac_tx_free 60dd47a0a62e mt76: mt7915: remove dead code in debugfs code ce74fc020d81 mt76: mt7921: add MU EDCA cmd support c062f6920356 mt76: mt7921: refactor mac.c to be bus independent bfa909c833e8 mt76: mt7921: refactor dma.c to be pcie specific 6556bddf26d2 mt76: mt7921: refactor mcu.c to be bus independent 1c8418207c86 mt76: mt7921: refactor init.c to be bus independent 6cf8248c1a44 mt76: mt7921: add MT7921_COMMON module 77600b0c10ac mt76: connac: move mcu reg access utility routines in mt76_connac_lib module 65362a00d07d mt76: mt7663s: rely on mcu reg access utility 956206bb55c3 mt76: mt7921: make all event parser reusable between mt7921s and mt7921e f0dedcf6aaf0 mt76: mt7921: use physical addr to unify register access 5079d5b0b13c mt76: sdio: move common code in mt76_sdio module 26257594398b mt76: sdio: introduce parse_irq callback e353424f1b07 mt76: sdio: extend sdio module to support CONNAC2 ddab3dd25f94 mt76: connac: extend mcu_get_nic_capability b2d9a1748a41 mt76: mt7921: rely on mcu_get_nic_capability e6ce5d9cbda0 mt76: mt7921: refactor mt7921_mcu_send_message ce3706a65ccd mt76: mt7921: introduce mt7921s support 3143118baf53 mt76: mt7921s: add reset support 645eac64bece mt76: mt76x0: correct VHT MCS 8/9 tx power eeprom offset d54796787cb7 mt76: move mt76_sta_stats in mt76.h 094e085abf5a mt76: move mt76_ethtool_worker_info in mt76 module f80ab6dde63d mt76: mt7915: run mt7915_get_et_stats holding mt76 mutex 4a11cb67dc27 mt76: mt7915: move tx amsdu stats in mib_stats 486da6fa2512 mt76: do not reset MIB counters in get_stats callback d8837b7c8dcd mt76: mt7921: add some more MIB counters 5ffe086fcd1b mt76: mt7921: introduce stats reporting through ethtool 69154ae23f6b mt76: mt7921: add sta stats accounting in mt7921_mac_add_txs_skb 4b65fbc4e203 mt76: mt7921: move tx amsdu stats in mib_stats 35b8025f466b mt76: mt7921: add per-vif counters in ethtool cfbbd861eb12 mt76: mt7915: enable HE UL MU-MIMO a0b94987df80 mt76: mt7915: rework mt7915_mcu_sta_muru_tlv() 5fbb686e9c0c mt76: mt7915: fix missing HE phy cap b649678c18ca mt76: mt7915: change max rx len limit of hw modules 9d288d7c0c73 mt76: mt7615: apply cached RF data for DBDC 4d2e81d9ecab mt76: mt7915: remove mt7915_mcu_add_he() 2c8c3bcd766c mt76: mt7915: rework .set_bitrate_mask() to support more options 577d45f6e4a0 mt76: mt7915: rework debugfs fixed-rate knob b68af355f707 mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_caps b52adf981561 mt76: mt7915: add WA firmware log support ed3d8569c400 mt76: mt7915: add debugfs knobs for MCU utilization 0f49a22314a5 mt76: mt7921: disable 4addr capability 754d4a37ab71 mt76: mt7921: fix mt7921s Kconfig f81f42fe875f mt76: Print error message when reading EEPROM from mtd failed fd25a550965d mt76: Make use of the helper macro kthread_run() 1d01257662a6 wireless: mediatek: mt7921: fix Wformat build warning f6bde7ba82ee mt76: connac: fix unresolved symbols when CONFIG_PM is unset 5dd32475c859 mt76: mt7915: get rid of mt7915_mcu_set_fixed_rate routine f5cfaaff3dd1 mt76: mt7921: drop offload_flags overwritten f5ad840ca5c0 mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy() 29a8a08827b1 mt76: mt7921: fix MT7921E reset failure f44685f2faee mt76: mt7915: fix return condition in mt7915_tm_reg_backup_restore() ae8e02ddd2b0 mt76: mt7915: fix SMPS operation fail e814e15716b0 mt76: reverse the first fragmented frame to 802.11 c9bca3ed9566 mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode dd054b7e16e7 mt76: only set rx radiotap flag from within decoder functions f1520c9bb332 mt76: mt7915: add default calibrated data support 0c489ea2865a mt76: testmode: add support to set MAC 91c5da3d0a7c mt76: mt7921: add support for PCIe ID 0x0608/0x0616 ca39b4bbc227 mt76: debugfs: fix queue reporting for mt76-usb 00b6f497e2e8 mt76: mt7921: introduce 160 MHz channel bandwidth support c1574466c733 mt76: fix possible OOB issue in mt76_calculate_default_rate 9680a17b0aed mt76: mt7921: fix possible NULL pointer dereference in mt7921_mac_write_txwi 78fc0dcdcef0 mt76: connac: fix a theoretical NULL pointer dereference in mt76_connac_get_phy_mode 05953e7d6fe7 mt76: mt7615: remove dead code in get_omac_idx 39f6c37127c1 mt76: connac: remove PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode 526591b203f3 mt76: do not pass the received frame with decryption error 256789bb400f mt76: fix the wiphy's available antennas to the correct value fa187f5cf068 mt76: fix timestamp check in tx_status 11ebf11a3587 mt76: mt7915: fix the wrong SMPS mode 8c69b815ee7f mt76: mt7921: honor mt76_connac_mcu_set_rate_txpower return value in mt7921_config bc6798f729f9 mt76: move sar utilities to mt76-core module b1d0ad2e74fe mt76: mt76x02: introduce SAR support f0a5b1118fa4 mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames 67f93aa9a207 mt76: mt7615: fix decap offload corner case with 4-addr VLAN frames 46261d4bbfb5 mt76: fix possible pktid leak a7fdd272efee mt76: mt7921: move mt76_connac_mcu_set_hif_suspend to bus-related files 3d9e13f567a4 mt76: mt7921s: fix the device cannot sleep deeply in suspend 99225b985cbc mt76: mt7615: fix unused tx antenna mask in testmode Signed-off-by: Felix Fietkau <nbd@nbd.name> (sync with master commit 5aa62cb7996803fa256a7b9f5beef818a7fe34d8)
* mac80211: fix crash in drivers relying on mac80211 retransmitting packets ↵Felix Fietkau2021-11-231-0/+35
| | | | | | | | | for powersave clients This showed up primarily on rt2x00 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d1ea575baa1b53bb477a020974afcec1b1193edc)
* mac80211: backport a few trivial patchesFelix Fietkau2021-11-236-0/+617
| | | | | | | | | No functional changes, just some renames to make it easier to keep mt76 in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit e62c5504701c7a665c9cf89ddbcb062f5ade6e37) (cherry-picked from commit a889dcd3f21e50dc3e7f827ff0e486020562a6f8)
* mac80211: backport AP mode TWT supportFelix Fietkau2021-11-233-1/+689
| | | | | | | | Required for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 978e822db354daf974811f2717c6013fa3eb8079) (cherry-picked from commit af9d31aacc286786a8765a44c2000d2eba02e61c)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-31 10:24:50 +0000