aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* x86: allow non gzipped imagesPaul Spooren2020-03-211-1/+6
| | | | | | | | | The previous image generation code would always gzipped images. This patch changes the behaviour and only compresses images when selected in menuconfig. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: use qemu-image command from image-commands.mkPaul Spooren2020-03-212-12/+9
| | | | | | | | | | | The `qemu-image` command converts images to the specified type and reduces redundant code. Adaption from Alexander Couzens <lynxis@fe80.eu> work[0]. [0]: https://git.openwrt.org/?p=openwrt/staging/lynxis.git;a=blob;f=target/linux/x86/image/Makefile;h=83b8140b7aefbe708fd09c9c61827e7e39bda8b4;hb=416cccf398e9589e3de386e05b61b1c46cace20d#l51 Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: remove obsolete legacy profilesPaul Spooren2020-03-215-91/+0
| | | | | | | | Rely on device profiles instead for packages selection. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebase, adjusted commit title] Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86: switch image generation to new codePaul Spooren2020-03-2111-121/+126
| | | | | | | | | | | | | | | | | | | | | | | | This commit introduces few related changes which need to be done in single commit to keep images buildable between git revisions. In result it retains all previous image creation possibilities with slight name change of generated images. Brief summary of the commit: * Split up image generation recipe to smaller chunks to make it more generic and reusable. * Make iso images x86 specific and drop their definition as root filesystem. * Convert image creation process to generic code specified in image.mk. * Make geode subtarget inherit features from the main target instead of redefining them. * For subtargets create device definitions with basic packages set. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebased] Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86/grub2: move grub2 image creation to packagePaul Spooren2020-03-213-22/+39
| | | | | | | | | | | Let the grub2 package take care of creating installable grub2 images, this will allow creating grub2 images without first calling x86 image generation recipe. Also as side effect, since those images are now shared, it'll reduce the number of calling grub-mkimage. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rebase, adjusted commit title] Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: connmark set-dscpmark fix build on 5.4Kevin Darbyshire-Bryant2020-03-211-2/+2
| | | | | | | | | | | | | | | | Fix header change that was done for kernel but 4.19 got missed for 5.4. Solves nasty errors like: 8.4.0_musl/include/linux/netfilter/xt_CONNMARK.h:5, from connmark_listener.c:30: /builder/shared-workdir/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-8.4.0_musl/include/linux/netfilter/xt_connmark.h:23:2: error: enumerator value for 'XT_CONNMARK_VALUE' is not an integer constant XT_CONNMARK_VALUE = BIT(0), ^~~~~~~~~~~~~~~~~ /builder/shared-workdir/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-8.4.0_musl/include/linux/netfilter/xt_connmark.h:25:1: error: enumerator value for 'XT_CONNMARK_DSCP' is not an integer constant }; Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* wireguard: bump to 0.0.20200318Jason A. Donenfeld2020-03-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WireGuard had a brief professional security audit. The auditors didn't find any vulnerabilities, but they did suggest one defense-in-depth suggestion to protect against potential API misuse down the road, mentioned below. This compat snapshot corresponds with the patches I just pushed to Dave for 5.6-rc7. * curve25519-x86_64: avoid use of r12 This buys us 100 extra cycles, which isn't much, but it winds up being even faster on PaX kernels, which use r12 as a RAP register. * wireguard: queueing: account for skb->protocol==0 This is the defense-in-depth change. We deal with skb->protocol==0 just fine, but the advice to deal explicitly with it seems like a good idea. * receive: remove dead code from default packet type case A default case of a particular switch statement should never be hit, so instead of printing a pretty debug message there, we full-on WARN(), so that we get bug reports. * noise: error out precomputed DH during handshake rather than config All peer keys will now be addable, even if they're low order. However, no handshake messages will be produced successfully. This is a more consistent behavior with other low order keys, where the handshake just won't complete if they're being used anywhere. * send: use normaler alignment formula from upstream We're trying to keep a minimal delta with upstream for the compat backport. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* wireguard-tools: bump to 1.0.20200319Jason A. Donenfeld2020-03-211-2/+2
| | | | | | | | | | | | | | | | * netlink: initialize mostly unused field * curve25519: squelch warnings on clang Code quality improvements. * man: fix grammar in wg(8) and wg-quick(8) * man: backlink wg-quick(8) in wg(8) * man: add a warning to the SaveConfig description Man page improvements. We hope to rewrite our man pages in mdocml at some point soon. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mediatek: move mt76 and wpad-bacic to mt7622 subtargetChuanhong Guo2020-03-212-3/+2
| | | | | | | | | mt76 is a target default package for mt7622-wmac only. mt7623 doesn't have integrated wireless support and wifi drivers for pcie cards should be added as device specific package. mt7629-wmac isn't supported by mt76 yet. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: fix firmware partitionChuanhong Guo2020-03-211-0/+13
| | | | | | | rename "kernel" partition in upstream dts to "firmware" and add denx,fit as compatible string for mtdsplit. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: backport spi-mem based mtk spinor driverChuanhong Guo2020-03-213-0/+800
| | | | | | | This new driver has full quadspi and DMA support, providing way better reading performance. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: refresh config for linux 5.4Chuanhong Guo2020-03-211-104/+1
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: fix ethernet default configChuanhong Guo2020-03-211-2/+2
| | | | | | | 1. fix typo: ucidef_set_interfaces_wan -> ucidef_set_interface_wan 2. change board name to mt7629-rfb to match upstream dts Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: load rtl8366_smi and rtl8367b on bootLuiz Angelo Daros de Luca2020-03-211-2/+2
| | | | | | | | | This external switch driver should be loaded on boot for network support in failsafe mode. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [alter commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: rtl8367b: add configuration for extif2Serge Vasilugin2020-03-211-5/+42
| | | | | | | | | | | | | | | | | | | | | | Both rtl8367b and rtl8367s have two extended interface rtl8367rb: 5 port + 2*RGMII/MII rtl8367s: 5 port + SGMII/HSGMI + RGMII/MII (?)rtl8367sb: 5 port + 2*RGMII/MII These interfaces correspond to EXT1 and EXT2 (ports 6 and 7 respectivly). This patch allow to configure EXT2 in dts-file: rtl8367rb { compatible = "realtek,rtl8367b"; cpu_port = <7>; realtek,extif2 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio0>; phy_id = <29>; }; Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> [fix indent, replace magic value, alter commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: rtl8367b: add definition of debug regChuanhong Guo2020-03-211-5/+30
| | | | | | | This commit adds definition of DEBUG0 and DEBUG1 registers and replace magic values with proper register modifying. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: do not try to setup hostapd-managed interfaces.Oldřich Jedlička2020-03-201-7/+11
| | | | | | | | | | | | | | | | | | | | | | For virtual access points (when multiple SSIDs are used for one physical AP), there exist one physical network interface and multiple virtual interfaces, which are fully under control of hostapd. When networking is setup, the script `/lib/netifd/wireless/mac80211.sh` is called, which tries to bring the interface up by a call to `ip link set dev <iface> up`. This call might fail for virtual APs, because the virtual interface might not have been created by hostapd yet. There are some artifical delays in the script most probably to handle this, but when DFS channel availability check on 5GHz band is issued, hostapd can delay creating virtual interfaces by a minute. In order to fix this (or work around it), do not try to bring the interface up (this is responsibility of hostapd anyway) and do not try to set txpower on the virtual interface. Fixes FS#2698. Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* x86: make crashdump worksChen Minqiang2020-03-204-1/+33
| | | | | | | | | | | | | | | 1. KERNEL_CRASH_DUMP should depends on KERNEL_PROC_KCORE (kexec use it) 2. select crashkernel mem size by totalmem mem <= 256M disable crashkernel by default mem >= 4G use 256M for crashkernel mem >= 8G use 512M for crashkernel default use 128M 3. set BOOT_IMAGE in kdump.init 4. resolve a "Unhandled rela relocation: R_X86_64_PLT32" error Tested on x86_64 Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* readline: needs host depend on ncurses to buildJan Kardell2020-03-201-0/+2
| | | | | | We must ensure that host ncurses is build before host readline. Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
* oxnas: backport patch fixing hang after rebootDaniel Golle2020-03-191-0/+77
| | | | | | | | | | | Sungbo Eo <mans0n@gorani.run> posted a patch fixing the long-standing reboot problem on the OXNAS OX820 platform: irqchip/versatile-fpga: Handle chained IRQs properly It got queued for 5.7. Import it to oxnas target patches for now. Fixes: b4917fa907 ("oxnas: fix oxnas-rps-timer dt-match") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* toolchain: Update GCC 9 to version 9.3.0Hauke Mehrtens2020-03-1821-61/+6
| | | | | | The removed patch is included in GCC 9.3.0. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: Update GCC 8 to version 8.4.0Hauke Mehrtens2020-03-1822-39/+9
| | | | | | The removed patch is included in GCC 8.4.0. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* cryptodev-linux: Fix error when compiling with 5.4 kernelJeffery To2020-03-182-1/+51
| | | | | | | | | | | | | Currently, cryptodev-linux fails to compile with a '"crypto_givcipher_type" undefined' error for targets on the 5.4 kernel, e.g. armvirt[1]. This backports an upstream patch[2] that fixes this error. [1]: https://downloads.openwrt.org/snapshots/faillogs/aarch64_generic/base/cryptodev-linux/compile.txt [2]: https://github.com/cryptodev-linux/cryptodev-linux/commit/f971e0cd4a0ebe59fb2e8e17240399bf6901b09b Signed-off-by: Jeffery To <jeffery.to@gmail.com>
* hostapd: fix segfault in wpa_supplicant ubusDaniel Golle2020-03-182-1/+3
| | | | | | | | | | | | | | When introducing ubus reload support, ubus initialization was moved to the service level instead of being carried out when adding a BSS configuration. While this works when using wpa_supplicant in that way, it breaks the ability to run wpa_supplicant on the command line, eg. for debugging purposes. Fix that by re-introducing ubus context intialization when adding configuration. Reported-by: @PolynomialDivision https://github.com/openwrt/openwrt/pull/2417 Fixes: 60fb4c92b6 ("hostapd: add ubus reload") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for TP-Link Archer D7/D7b v1Davide Fioravanti2020-03-187-0/+390
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer D7 v1 is a dual-band AC1750 router + modem. The router section is based on Qualcomm/Atheros QCA9558 + QCA9880. The "DSL" section is based on BCM6318 but it's currently not supported. The Archer D7b seems to differ from the Archer D7 only in the partition table. Router section - Specification: 775/650/258 MHz (CPU/DDR/AHB) 128 MB of RAM (DDR2) 16 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 4x 10/100/1000 Mbps Ethernet 7x LED, 2x button UART header on PCB Known issues: - Broadband LED (missing GPIO - probably driven by the BCM6318) - Internet LED (missing GPIO - probably driven by the BCM6318) - WIFI LED (working only for one interface at a time, while in the OEM firmware works for both wifi interfaces; thus, this patch does not set a trigger by default) - DSL not working (eth0) UART connection --------------- J1 HEADER (Qualcomm CPU) . VCC . GND . RX O TX J41 HEADER (Broadcom CPU) . VCC . GND . RX O TX The following instructions require a connection to the J1 UART header and are tested for the Archer D7 v1. For the Archer D7b v1, names should be changed accordingly. Flash instructions under U-Boot, using UART ------------------------------------------ 1. Press "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d7-v1-squashfs-sysupgrade.bin erase 0x9f020000 +f90000 cp.b 0x81000000 0x9f020000 0xf90000 reset Initramfs instructions under U-Boot for testing, using UART ---------------------------------------------------------- 1. Press "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftpboot 0x81000000 openwrt-ath79-generic-tplink_archer-d7-v1-initramfs-kernel.bin bootm 0x81000000 4. Here you can backup the original firmware and/or flash the sysupgrade openwrt if you want Restore the original firmware ----------------------------- 0. Backup every partition using the OpenWrt web interface 1. Download the OEM firmware from the TP-Link website 2. Extract the bin file in a folder (eg. Archer_D7v1_1.6.0_0.9.1_up_boot(160216)_2016-02-16_15.55.48.bin) 3. Remove the U-Boot and the Broadcom image part from the file. Issue the following command: dd if="Archer_D7v1_1.6.0_0.9.1_up_boot(160216)_2016-02-16_15.55.48.bin" of="Archer_D7v1_1.6.0_0.9.1_up_boot(160216)_2016-02-16_15.55.48.bin.mod" skip=257 bs=512 count=31872 4. Double check the .mod file size. It must be 16318464 bytes. 5. Flash it using the OpenWrt web interface. Force the update if needed. WARNING: Remember to NOT keep settings. 5b. (Alternative to 5.) Flash it using the U-Boot and UART connection. Issue below commands in the U-Boot: tftpboot 0x81000000 Archer_D7v1_1.6.0_0.9.1_up_boot(160216)_2016-02-16_15.55.48.bin.mod erase 0x9f020000 +f90000 cp.b 0x81000000 0x9f020000 0xf90000 reset Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> [cosmetic DTS changes, remove TPLINK_HWREVADD := 0, do not use two phyXtpt at once, add missing buttons, minor commit message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link Archer C60 v3Adrian Schmutzler2020-03-189-12/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C60 v3 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. It seems to be identical to the v2 revision, except that it lacks a WPS LED and has different GPIO for amber WAN LED. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 6x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery While TFTP works for OpenWrt images, my device didn't accept the only available official firmware "Archer C60(EU)_V3.0_190115.bin". In contrast to earlier revisions (v2), the v3 contains the (same) MAC address twice, once in 0x1fa08 and again in 0x1fb08. While the partition-table on the device refers to the latter, the firmware image contains a different partition-table for that region: name device firmware factory-boot 0x00000-0x1fb00 0x00000-0x1fa00 default-mac 0x1fb00-0x1fd00 0x1fa00-0x1fc00 pin 0x1fd00-0x1fe00 0x1fc00-0x1fd00 product-info 0x1fe00-0x1ff00 0x1fd00-0x1ff00 device-id 0x1ff00-0x20000 0x1ff00-0x20000 While the MAC address is present twice, other data like the PIN isn't, so with the partitioning from the firmware image the PIN on the device would actually be outside of its partition. Consequently, the patch uses the MAC location from the device (which is the same as for the v2). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: rename ubnt_bullet-m to ubnt_bullet-m-ar7241Russell Senior2020-03-185-9/+10
| | | | | | | | | | | Since there exists another variant of the Bullet M with AR7240 SoC under the same name, this patch introduces the SoC into the device name to be able to distinguish these variants. Signed-off-by: Russell Senior <russell@personaltelco.net> [add commit message, adjust model in DTS, fix 02_network and SUPPORTED_DEVICES] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: generalize ubnt_xm dtsi for ar7240 and ar7241Russell Senior2020-03-189-14/+23
| | | | | | | | | * Prepare to support the AR7240 variant of ubiquiti bullet m, by reorganizing the related dtsi files. * Distribute SOC variable across ubnt-xm devices. Signed-off-by: Russell Senior <russell@personaltelco.net>
* bcm27xx: enable THERMAL_WRITABLE_TRIPS on bcm2710 and bcm2711Bjørn Mork2020-03-184-0/+4
| | | | | | | | | | | | | The PoE hat supported on the RPi 3B+ and 4B comes with a rather loud fan, tripped in two steps by the brcmstb_thermal thermal_zone driver. Enabling writable trip points allow users to adjust the fan trip points according to their preferred temp/noise ratio. This setting is enabled on most other targets with similar thermal_zone controlled cooling devices. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: do not add metadata to factory imagesMathias Kresin2020-03-171-2/+2
| | | | | | | The image metadata are openwrt specific and not required for factory images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: kernel 5.4: enable JFFS2Mathias Kresin2020-03-171-1/+0
| | | | | | | | We do not build images with a jffs2 rootfs, but jffs2 is still used as filesystem for the rootfs_data. Fixes: e3eaf578082e ("lantiq: kernel 5.4: debloat kernel config") Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: fix execute bit for 02_network on mikrotik subtargetAdrian Schmutzler2020-03-171-0/+0
| | | | | | | | | | When creating the mikrotik subtarget, the execute bit on 02_network was not set. Fix it. Fixes: a66eee63368e ("ath79: add mikrotik subtarget") Reported-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: get rid of BOARD_NAME for Mikrotik RouterBOARDAdrian Schmutzler2020-03-172-2/+7
| | | | | | | | | | | | | So far, specifying "BOARD_NAME := routerboard" is required by the upgrade code of Mikrotik NAND devices, as "sysupgrade-routerboard" is hardcoded in platform_do_upgrade_mikrotik_nand(). This patch replaces the latter with a grep for the name like it is already done in nand_upgrade_tar() in /lib/upgrade/nand.sh. By that, BOARD_NAME is obsolete now for this device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: remove hard-coded folder name from Mikrotik RB upgradeAdrian Schmutzler2020-03-171-1/+6
| | | | | | | | | | | | | | So far, specifying "BOARD_NAME := routerboard" is required by the upgrade code of Mikrotik NAND devices, as "sysupgrade-routerboard" is hardcoded in platform_do_upgrade_mikrotik_rb(). This patch replaces the latter with a grep for the name like it is already done in nand_upgrade_tar() in /lib/upgrade/nand.sh. This should enable upgrades from ar71xx to ath79 without setting BOARD_NAME for the latter. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add mikrotik subtargetRoger Pueyo Centelles2020-03-1724-67/+218
| | | | | | | | | | | | | | | | | This commit creates the ath79/mikrotik subtarget in order to support MikroTik devices based on Qualcomm Atheros MIPS SoCs. MikroTik devices need a couple of specific features: the split MiNOR firmware MTD format, which is not used by other devices, and the 4k sector erase size on SPI NOR storage, which can not be added to the ath79/generic and ath79/nand subtargets now. Additionally, the commit moves the two MikroTik devices already in the generic and nand subtargets to this new one. Tested on the RB922 board and the wAP AC router. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* hostapd: fix pointer cast warningsLeon M. George2020-03-172-8/+15
| | | | Signed-off-by: Leon M. George <leon@georgemail.eu>
* hostapd: remove trailing whitespaceLeon M. George2020-03-171-2/+2
| | | | Signed-off-by: Leon M. George <leon@georgemail.eu>
* oxnas: enable sata on Pogoplug V3/ProSungbo Eo2020-03-173-3/+18
| | | | | | | | | Pogoplug V3/Pro has an interanl SATA port. To use it, DTS sata node should be enabled, and kmod-ata-oxnas-sata package needs to be installed. Fixes: FS#2542 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* tegra: switch to kernel 5.4Tomasz Maciej Nowak2020-03-171-1/+1
| | | | | | | | | Build the latest kernel by default, since testing did not show any regressions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [fix merge conflict in tegra/Makefile] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tegra: refresh patches and kernel config for 5.4Tomasz Maciej Nowak2020-03-173-19/+35
| | | | | | | | | This commit also disables Trusted Foundations firmware support as this feature won't be used by any device. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [fix merge conflict in tegra/Makefile] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* tegra: copy kernel config and patches for 5.4Tomasz Maciej Nowak2020-03-173-0/+682
| | | | Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: move TEO governor to generic configTomasz Maciej Nowak2020-03-1713-12/+1
| | | | | | | | This new symbol popped up in few places. Disable it in generic config. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [fixed merge conflict in generic/config-5.4] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mxs: fix user led for OLinuXino boardsMichael Heimpold2020-03-171-0/+61
| | | | | | | | | | More testing after kernel upgrade to 5.4 uncovered a regression: the user led is not present anymore due to a pin mux "collision" in device tree. A patch sent to upstream kernel was accepted now. Integrate this pending fix as platform specific patch so that user led is available again. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* zynq: switch to kernel 5.4Luis Araneda2020-03-171-1/+1
| | | | | | | | | Use kernel 5.4 by default compile-tested: all devices from target run-tested: Digilent Zybo Z7-20 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: refresh kernel 5.4 configLuis Araneda2020-03-171-20/+30
| | | | | | By running make kernel_oldconfig and selecting relevant options Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: copy config from kernel 4.19 to 5.4Luis Araneda2020-03-171-0/+655
| | | | | | Refreshed kernel 4.19 config before copying the file Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* lantiq: kernel 5.4: debloat kernel configMathias Kresin2020-03-165-11/+8
| | | | | | | | | | | | | | | The etop driver is used by all targets except xrx200. Remove the UBIFS compression support for zlib and zstd from the xway subtarget. The hardware is EOL for a long time and it's unlikely to ever see a board shipped with an UBIFS using these compression methods. Remove the JFFS2 support. Support for jjfs2 images was dropped years ago. It shrinks the compressed kernel up to 130 KByte. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add Linux 5.4 support as testing kernel versionMathias Kresin2020-03-1640-366/+884
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to the mainline Lantiq PCIe PHY driver and update the vr9.dtsi accordingly. The Lantiq IRQ SMP support added upstream required changes to the SoC dtsi as well. Following changes are made to the Lantiq kernel patches: 0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch 0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch applied upstream 0008-MIPS-lantiq-backport-old-timer-code.patch access_ok API update because it lost it's type (which was the first) parameter in upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok() function") 0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch merged into 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch revert upstream changes required for upstream xrx200 ethernet and xrx200 (DSA) switch driver but breaking our driver 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch required for our driver but dropped upstream, add former upstream version 0028-NET-lantiq-various-etop-fixes.patch now has to use the phy_set_max_speed API instead of modifying phydev->supported. Also call ltq_dma_enable_irq() in ltq_etop_open() based on upstream commit cc973aecf0b054 ("MIPS: lantiq: Do not enable IRQs in dma open") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: linux 5.4: remove support for the linux,mtd-name OF propertyMartin Blumenstingl2020-03-163-46/+0
| | | | | | | | This is referenced in two .dts but never actually used from userspace. Drop support for this property because it's not used and because it makes updating to Linux 5.4 harder (as the patch doesn't apply anymore). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: copy target to kernel 5.4Mathias Kresin2020-03-16195-0/+27082
| | | | | | | | | Duplicate kernel 4.19 config and patches for kernel 5.4. Duplicate the devicetree source files as well, they need kernel 5.4 specific adjustments. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 04:44:07 +0000