aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: expose chanbw support to debugfs for ath9k_htcTomislav Požega2020-02-131-1/+1
| | | | | | | This will ensure the htc suffixed driver also gets created chanbw debugfs entry. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
* ath10k-firmware: update ath10k-ct firmwareMichael Yartys2020-02-131-24/+24
| | | | | | | | | | | | | | This supports better per-chain noise floor reporting, which in turn allows for better RSSI reporting in the driver. Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices). Wave-2 has fix for crash likely related to rekeying. Wave-1 has some debugging code added where a user reported a crash. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986] Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* ath10k-ct: update to 2020-01-29Michael Yartys2020-02-1310-41/+41
| | | | | | | | | | | | | | | | | Changes: ath10k-ct: Support better RSSI measurements. When used with recent firmware, these changes allow the driver to query per-chain noise-floor from the radio to better calculate the per-chain RSSI. The per-chain RSSI is then summed to provide the 'combined RSSI'. This gives better per-chain RSSI as well as combined RSSI, especially when running with more than 20Mhz bandwidths. Refresh patches. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986] Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* sunxi: backport increased SATA/AHCI DMA TX/RX FIFOsAleksander Jan Bajkowski2020-02-131-0/+94
| | | | | | | | | | | | | | | | | | | | | This backports SATA performance boost from 5.3 kernel: Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie. TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s from lame 36 MiB/s to 45 MiB/s previously. Read performance is above 200 MiB/s. [tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K] dd bs Before MB/s After MB/s Increase 4k 14.4 16.5 15% 64k 34.5 74.4 116% 1M 40.5 93.2 130% Ref: https://forum.openwrt.org/t/sunxi-sata-write-speed-patch/54555/5 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [commit subject & description tweaks] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for TP-Link TL-WR940N v6Adrian Schmutzler2020-02-134-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TL-WR940N v6 is similar to v3/v4, it just has different LEDs and MAC address assignment. Specification: - 750 MHz CPU - 32 MB of RAM - 4 MB of FLASH - 2.4 GHz WiFi - 4x 10/100 Mbps Ethernet The use of LEDs is based on ar71xx, so blue LED is used for WAN and orange LED for diag (boot/failsafe/etc.). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr940nv6_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Thanks to Manuel Kock for reviewing and testing this patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Manuel Kock <github.web@manu.li>
* ath79: enable forceless sysupgrade from ar71xx on fritz300eAdrian Schmutzler2020-02-131-0/+1
| | | | | | | This adds the ar71xx board name to the SUPPORTED_DEVICES on ath79, so forceless sysupgrade on this device becomes possible. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: swconfig: make compatible with kernel 5.2Mathias Kresin2020-02-121-6/+41
| | | | | | | | | | | | | | | | | | | | | Since kernel 5.2 within netlink messages the NLA_F_NESTED nested flag is validated. But swconfig/swlib doesn't set the flag for SWITCH_ATTR_OP_VALUE_PORTS related netlink messages and assigning ports to vlans via swconfig dev switch0 vlan 1 set ports '0 1 2 3 4 6t' Errors put with "Failed to set attribute: Invalid input data or parameter". Relax the validation rules and use the deprecated functions, to use the same level of validation as it was till kernel 5.1. Depending on who has swconfig related netlink messages implemented, there might be more broken tools out there and we should keep backward compatibility if possible. Signed-off-by: Mathias Kresin <dev@kresin.me> Tested-by: Rafał Miłecki <rafal@milecki.pl>
* uhttpd: update to latest Git HEADJo-Philipp Wich2020-02-121-4/+4
| | | | | | 2ee323c file: poke ustream after starting deferred program Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: seccomp: fix resource leakKevin Darbyshire-Bryant2020-02-111-3/+3
| | | | | | | | Bump to latest commit: c30b23e seccomp: fix resource leak Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: rewrite run_parsers_by_type() to use add_mtd_partitions()Rafał Miłecki2020-02-113-24/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make run_parsers_by_type() more similar to the parse_mtd_partitions(): 1. Use struct mtd_partitions 2. Use add_mtd_partitions() This change simplifies run_parsers_by_type() by: 1. Dropping loop 2. Dropping code getting partition properties (name, offset, size) Moreover this change allows passing more partitions details (e.g. mask_flags). One noticeable change introduced by this patch is adding parsed partitions as children. This results in printing their *relative* offsets which unifies this code with parse_mtd_partitions() behaviour. Before: [ 1.785448] 0x00000018f800-0x000000fb0000 : "rootfs" [ 1.791642] mtd: device 4 (rootfs) set to be root filesystem [ 1.797537] 1 squashfs-split partitions found on MTD device rootfs [ 1.804009] 0x0000004e0000-0x000000fb0000 : "rootfs_data" After: [ 1.785376] 0x00000018f800-0x000000fb0000 : "rootfs" [ 1.791601] mtd: device 4 (rootfs) set to be root filesystem [ 1.797491] 1 squashfs-split partitions found on MTD device rootfs [ 1.803936] Creating 1 MTD partitions on "rootfs": [ 1.808910] 0x000000350800-0x000000e20800 : "rootfs_data" Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: append tail to WF2881 initramfs imageSungbo Eo2020-02-111-0/+8
| | | | | | | | | | | | Stock firmware has a vendor-defined tail at the end of uImage for image validation. This patch enables OpenWrt installation from stock firmware without having to access the UART console. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: add support for TP-Link TL-WA830RE v1Christian Buschau2020-02-116-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ports support for the TL-WA830RE v1 range extender from ar71xx to ath79. Specifications: - SOC: Atheros AR7240 - CPU: 400MHz - Flash: 4 MiB (Spansion S25FL032P) - RAM: 32 MiB (Zentel A3S56D40FTP-G5) - WLAN: Atheros AR9280 bgn 2x2 - Ethernet: 1 port (100M) Flash instructions: - install from u-boot with tftp (requires serial access) > setenv ipaddr a.b.c.d > setenv serverip e.f.g.h > tftpboot 0x80000000 \ openwrt-ath79-tiny-tplink_tl-wa830re-v1-squashfs-factory.bin > erase 0x9f020000 +0x3c0000 > cp.b 0x80000000 0x9f020000 0x3c0000 > bootm 0x9f020000 - flash factory image from OEM WebUI - sysupgrade from ar71xx image The device seems to be a clone of the following devices not yet added to ath79: - tl-wa701nd-v1 - tl-wa730re-v1 - tl-wa801nd-v1 - tl-wa901nd-v1 Signed-off-by: Christian Buschau <christian.buschau@mailbox.org> [make use of ar7240_tplink.dtsi, add note about clones] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: reorganize DTSI for ar7240 TP-Link devicesAdrian Schmutzler2020-02-118-46/+57
| | | | | | | | | | | | | | | | The current set of TP-Link devices with ar7240 SoC all share the same DTSI file. As the latter is very similar to the definition required for the to-be-supported TP-Link TL-WA devices with ar7240, this patch splits the definitions into a shared part for all TP-Link devices (ar7240_tplink.dtsi) and a file containing the specific setup for the present TL-WR devices (ar7240_tplink_tl-wr.dtsi), equivalent to the former ar7240_tplink_tl-wr74xn-v1.dtsi. While at it, remove unused firmware partition label and rename pinmux_switch_led_pins. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: restore pin state on probe for ar934x-spiChuanhong Guo2020-02-101-5/+11
| | | | | | | | | | | | If bootloader doesn't terminate its last spi operation properly before starting kernel, our first transfer in kernel becomes a continuous transfer to that request instead of a new one. Fix this flaw by restoring IOC register, which restored all pin state to default. Fixes: ebf0d8dade ("ath79: add new ar934x spi driver") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* uci: fix PKG_SOURCE_VERSION valueHans Dedecker2020-02-091-1/+1
| | | | | | Fixes PKG_SOURCE_VERSION value which was wrongly set in commit f6e07c8284 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard-tools: bump to 1.0.20200206Jason A. Donenfeld2020-02-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * wg-quick: android: split uids into multiple commands Newer android's ndc implementations have limits on uid size, so we have to break these into several lists. * man: document dynamic debug trick for Linux This comes up occasionally, so it may be useful to mention its possibility in the man page. At least the Arch Linux and Ubuntu kernels support dynamic debugging, so this advice will at least help somebody. So that you don't have to go digging into the commit, this adds this helpful tidbit to the man page for getting debug logs on Linux: # modprobe wireguard && echo module wireguard +p > /sys/kernel/debug/dynamic_debug/control * extract-{handshakes,keys}: rework for upstream kernel These tools will now use the source code from the running kernel instead of from the old monolithic repo. Essential for the functioning of Wireshark. * netlink: remove libmnl requirement We no longer require libmnl. It turns out that inlining the small subset of libmnl that we actually use results in a smaller binary than the overhead of linking to the external library. And we intend to gradually morph this code into something domain specific as a libwg emerges. Performance has also increased, thanks to the inliner. On all platforms, wg(8) only needs a normal libc. Compile time on my system is still less than one second. So all in all we have: smaller binary, zero dependencies, faster performance. Packagers should no longer have their wireguard-tools package depend on libmnl. * embeddable-wg-library: use newer string_list * netlink: don't pretend that sysconf isn't a function Small cleanups. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* procd: update to latest git HEADHans Dedecker2020-02-091-2/+2
| | | | | | | | Fixes c0c988e179a75d33c82ed0621d954fc0ac2c0c14 bcb8655 instance: add 'requirejail' attribute Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* brcm63xx: apply updated compatibles for selecting board_infoAdrian Schmutzler2020-02-08102-224/+224
| | | | | | | | | | When changing compatibles in e4ba8c82947e ("brcm63xx: use more systematic names for image and DTS files"), I forgot to update them in kernel patches as well. So, do it now. Fixes: e4ba8c82947e ("brcm63xx: use more systematic names for image and DTS files") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: be more specific about SOC namesAdrian Schmutzler2020-02-087-6/+12
| | | | | | | This uses the specific SOC names for several devices where the Chip ID was used incorrectly before. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: align DTS model with Makefile and compatibleAdrian Schmutzler2020-02-0815-18/+18
| | | | | | | | Since the model string in DTS is not required to derive board name anymore, we can now align it with the model name in Makefile and the compatible. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: use compatible instead of manually setting board nameAdrian Schmutzler2020-02-087-590/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the translation of device model name into a board name in lib/brcm63xx.sh. The latter has been actually totally useless as we have the compatible which can be used instead of the board name (and actually is at other targets like ath79 or ramips). The change requires updating the base-files with the new identifiers based on compatible. With all "board names" replaced by the compatible, we do not need the old scripts to detect board name anymore and can also remove the obsolete treatment of "legacy" devices without DTS, as there are none of those left. So, this patch removes the target-specific board detection and uses the standard procedure in package/base-files/files/lib/preinit/02_sysinfo This also fixes several cases where the board name was not set or evaluated correctly: - asmax,ar1004g in 02_network - telsey,magic in 09_fix_crc/02_network - brcm,bcm96338gw in 02_network - brcm,bcm96338w in 02_network - brcm,bcm96348gw in 02_network - dynalink,rta1025w in 02_network - huawei,echolife-hg520v in 02_network - several cases in diag.sh The following orphaned identifiers are removed from board.d files: - dmv-s0 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: remove unneeded line break for DEVICE_PACKAGESAdrian Schmutzler2020-02-081-156/+76
| | | | | | | | | In brcm63xx image Makefile DEVICE_PACKAGE definitions are split into multiple lines with no apparent need. Merge them into one line to increase readability and maintainability. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: use more systematic names for image and DTS filesAdrian Schmutzler2020-02-0891-310/+226
| | | | | | | | | | | | | | | | | | | | This changes brcm63xx target to achieve consistency between image names, device nodes names, compatible, DTS name and device name as much as possible. As with other targets, having consistent names is supposed to make life easier for developers and reduces the number of "variables" in the system. In particular, applying the DTS scheme will make it easier to find the correct file and architecture. DTS files are named based on the increasingly common soc-vendor-model scheme, using hyphens for separation as this seems to be the kernel way. Since the compatible is not used at the moment, I took the chance to also align them with this patch. For the SOC, the already existing CFE_CHIP_ID can be exploiting for all but two devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move b43 install function to broadcom.mkSungbo Eo2020-02-082-22/+23
| | | | | | | | Most of the broadcom packaging codes were moved to broadcom.mk in commit 7f984dab1c52 ("mac80211: move broadcom packaging code to broadcom.mk"), but b43/install still remained. Move it now. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: fix typos in KernelPackage descriptionSungbo Eo2020-02-085-6/+6
| | | | | | | | | | | | Fixes: ed2839ac4190 ("kernel/modules: add kmod-pmbus-zl6100 module") Fixes: bbcb9de93547 ("Add package for gpio rotary encoder") Fixes: 76854589829a ("package/kernel: package kmod-input-matrixkmap") Fixes: 8bfef353850a ("kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names") Fixes: f03bf608b151 ("kernel: Add dummy sound driver") Fixes: dda5d9b78643 ("ramips: rename pwm kernel module") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* hostapd: remove erroneous $(space) redefinitionJo-Philipp Wich2020-02-081-3/+0
| | | | | | | | | | | | | | | | The $(space) definition in the hostapd Makefile ceased to work with GNU Make 4.3 and later, leading to syntax errors in the generated Kconfig files. Drop the superfluous redefinition and reuse the working $(space) declaration from rules.mk to fix this issue. Fixes: GH#2713 Ref: https://github.com/openwrt/openwrt/pull/2713#issuecomment-583722469 Reported-by: Karel Kočí <cynerd@email.cz> Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Shaleen Jain <shaleen@jain.sh> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix device name of netis WF-2881 to WF2881Sungbo Eo2020-02-074-11/+10
| | | | | | | | | | | The correct model name of WF-2881 is WF2881 without hyphen. The former used boardnames are not added to SUPPORTED_DEVICES, to make it explicit that the sysupgrade-tar image, which is newly added in the previous commit, should not be used to upgrade from older version. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use nand_do_upgrade for netis WF-2881Sungbo Eo2020-02-073-3/+19
| | | | | | | | | | WF-2881 sysupgrade image uses UBI rootfs, but still relies on default_do_upgrade. Because of this, config backup is not restored after sysupgrade. It can be fixed by switching to nand_do_upgrade and sysupgrade-tar image. default_do_upgrade does not handle sysupgrade-tar properly, so one should use factory image to upgrade from older version. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: add LED trigger for TL-WR902AC v1 WAN LEDLech Perczak2020-02-071-0/+1
| | | | | | | | | | | Inspired by commit c48b571ad708, add an LED trigger for the WAN LED on top of the TP-Link TL-WR902AC v1. Currently, only the LED on the port itself shows the link state, while the LED on top of the device stays dark. The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the port was labeled LAN. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: add support for Atheros AR934x HS UARTDaniel Golle2020-02-072-0/+65
| | | | | | | | | AR934x chips also got the 'old' qca,ar9330-uart in addition to the 'new' ns16550a compatible one. Add support for UART1 clock selector as well as device-tree bindings in ar934x.dtsi to make use of that uart. Reported-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDEDaniel Golle2020-02-071-0/+64
| | | | | | | | | | | | | | | | On AR934x this UART is usually not initialized by the bootloader as it is only used as a secondary serial port while the primary UART is a newly introduced NS16550-compatible. In order to make use of the ar933x-uart on AR934x without RTS/CTS hardware flow control, one needs to set the UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this UART is used as primary/console, the bootloader on AR934x typically doesn't set those bits. Setting them explicitely on AR933x does not do any harm, so just set them unconditionally. Tested-by: Chuanhong Guo <gch981213@gmail.com Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routersDan Haab2020-02-072-0/+37
| | | | | | | | Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0 or newer and uploading firmware using "Firmware Update" web UI page. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* firmware-utils: add lxlfw tool for generating Luxul firmwaresDan Haab2020-02-072-0/+283
| | | | | | It's a simple tool prepending image with a Luxul header. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* ath79: ag71xx: use netif_receive_skb_list on 4.19Chuanhong Guo2020-02-071-1/+19
| | | | | | | | This new function make batch processing of network packets possible, which slightly improves performance. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: Rosen Penev <rosenp@gmail.com>
* kernel: remove duplicate flash chip definitionDaniel Golle2020-02-062-18/+16
| | | | | | | XTX XT25F128A shares it's chip ID with XM25QH128A which got identical features. Hence there it makes no sense to add it to the driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: use ar934x-spi for ar933x as wellChuanhong Guo2020-02-061-3/+2
| | | | | | | | ar933x appears to have the same spi controller as ar934x but it's not mentioned in datasheet at all. Use new spi driver instead to gain more flash operating performance. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ath79: add new ar934x spi driverChuanhong Guo2020-02-0611-15/+346
| | | | | | | | | | | A new shift mode was introduced since ar934x which has a way better performance than current bitbang driver and can handle higher spi clock properly. This commit adds a new driver to make use of this new feature. This new driver has chipselect properly configured and we don't need cs-gpios hack in dts anymore. Remove them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: brcm: backport remaining 5.6 kernel patchesRafał Miłecki2020-02-0610-3/+651
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* wireguard: bump to 0.0.20200205Jason A. Donenfeld2020-02-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | * compat: support building for RHEL-8.2 * compat: remove RHEL-7.6 workaround Bleeding edge RHEL users should be content now (which includes the actual RedHat employees I've been talking to about getting this into the RHEL kernel itself). Also, we remove old hacks for versions we no longer support anyway. * allowedips: remove previously added list item when OOM fail * noise: reject peers with low order public keys With this now being upstream, we benefit from increased fuzzing coverage of the code, uncovering these two bugs. * netns: ensure non-addition of peers with failed precomputation * netns: tie socket waiting to target pid An added test to our test suite for the above and a small fix for high-load CI scenarios. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ramips: add support for I-O DATA WN-AX1167GR2INAGAKI Hiroshi2020-02-054-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA WN-AX1167GR2 is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : NAND 128 MiB - WLAN : MediaTek MT7615D (2.4/5 GHz, 2T2R) - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7621A (MT7530) - LEDs/Input : 2x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J5: Vcc, TX, RX, NC, GND - 57600 bps Flash instruction using initramfs image: 1. Boot WN-AX1167GR2 normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with squashfs-sysupgrade image 5. Wait ~120 seconds to complete flashing Notes: - configuration in DeviceTree of DBDC (Dual-Band-Dual-Concurrent) mode for MT7615D chip is not supported in mt76 driver - last 0x80000 (512 KiB) in NAND flash is not used on stock firmware - stock firmware requires "customized uImage header" by MSTC (MitraStar Technology Corp.), but U-Boot doesn't - uImage magic (0x0 - 0x3) : 0x434F4D42 (COMB) - header crc32 (0x4 - 0x7) : with data length and data crc32 - image name (0x20 - 0x37) : model ID and firmware versions - data length (0x38 - 0x3b): kernel + rootfs - data crc32 (0x3c - 0x3f) : kernel + rootfs Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for I-O DATA WN-DX1167RINAGAKI Hiroshi2020-02-056-4/+268
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I-O DATA WN-DX1167R is a 2.4/5 GHz band 11ac rotuer, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : NAND 128 MiB - WLAN : MediaTek MT7615D (2.4/5 GHz, 2T2R) - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7621A (MT7530) - LEDs/Input : 2x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J5: Vcc, TX, RX, NC, GND - 57600 bps Flash instruction using initramfs image: 1. Boot WN-DX1167R normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with squashfs-sysupgrade image 5. Wait ~120 seconds to complete flashing Notes: - configuration in DeviceTree of DBDC (Dual-Band-Dual-Concurrent) mode for MT7615D chip is not supported in mt76 driver - last 0x80000 (512 KiB) in NAND flash is not used on stock firmware - stock firmware requires "customized uImage header" by MSTC (MitraStar Technology Corp.), but U-Boot doesn't - uImage magic (0x0 - 0x3) : 0x434F4D43 (COMC) - header crc32 (0x4 - 0x7) : with data length and data crc32 - image name (0x20 - 0x37) : model ID and firmware versions - data length (0x38 - 0x3b): kernel + rootfs - data crc32 (0x3c - 0x3f) : kernel + rootfs Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* ramips: extend and rename wr1201-factory-headerINAGAKI Hiroshi2020-02-051-14/+16
| | | | | | | | | | | | | | | | | | | | | This commit adds the ability to set custom uImage magic to Build/wr1201-factory-header and renames it to "Build/custom-initramfs-uimage". Custom uImage header in initramfs image is required on following devices: - I-O DATA WN-AX1167GR2 - I-O DATA WN-AX2033GR - I-O DATA WN-AX2033GR2 - I-O DATA WN-DX1167R While at it, fix typo in comment. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [shorten commit title, minor commit message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "iwinfo: update to latest Git HEAD"Jo-Philipp Wich2020-02-052-3/+12
| | | | | | | | | This reverts commit 96424c143dd818b391d9b8da18249eca1d2e6c83. The commit changed libiwinfo's internal ABI which breaks a number of downstream projects, including LuCI and rpcd-mod-iwinfo. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* procd: support 'requirejail' attributeKevin Darbyshire-Bryant2020-02-042-2/+3
| | | | | | | | | | | | | | | | Bump procd package to reduce log spam related to missing jail binaries in a non-jail capable system. bcb8655 instance: add 'requirejail' attribute An additional jail attribute 'requirejail' can now be used to indicate mandatory use of a jailed environment and hence prevent process startup in the event that the jail subsystem is unavailable. Procd will now only log errors if jail is unavailable and 1) is a mandatory requirement or 2) a procd debug level of at least 2 is in use. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iwinfo: update to latest Git HEADDavid Bauer2020-02-042-12/+3
| | | | | | | | | eba5a20 iwinfo: add device id for BCM43602 a6914dc iwinfo: add BSS load element to scan result bb21698 iwinfo: add device id for Atheros AR9287 7483398 iwinfo: add device id for MediaTek MT7615E Signed-off-by: David Bauer <mail@david-bauer.net>
* brcm2708: update to latest patches from RPi foundationÁlvaro Fernández Rojas2020-02-04618-65/+3580
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest firmwareÁlvaro Fernández Rojas2020-02-041-15/+15
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add support for GD25D05 SPI NORKoen Vandeputte2020-02-043-0/+87
| | | | | | | | | | | | | | | | | | | | | | This chip is used on newer RB912UAG-5HPnD r2 boards: Before: [ 0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10 [ 0.649381] NAND flash driver for the RouterBOARD 91x series After: [ 0.641714] m25p80 spi0.0: found gd25d05, expected m25p80 [ 0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes) [ 0.655122] Creating 4 MTD partitions on "spi0.0": [ 0.660164] 0x000000000000-0x00000000c000 : "routerboot" [ 0.667782] 0x00000000c000-0x00000000d000 : "hard_config" [ 0.675073] 0x00000000d000-0x00000000e000 : "bios" [ 0.682613] 0x00000000e000-0x00000000f000 : "soft_config" [ 0.690304] NAND flash driver for the RouterBOARD 91x series Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.101Koen Vandeputte2020-02-0440-408/+88
| | | | | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Remove upstreamed: - 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch - 950-0202-staging-bcm2835-camera-fix-module-autoloading.patch - 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.169Koen Vandeputte2020-02-0427-327/+80
| | | | | | | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2019-14896 - CVE-2019-14897 Remove upstreamed: - 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch - 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>