aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: Remove patch only needed for kernel 5.10Hauke Mehrtens2021-05-141-29/+0
| | | | | | | Kernel 5.10 is not supported by OpenWrt 21.02, remove this patch. Fixes: d530ff37bf33 ("mvebu: armada 370: dts: fix the crypto engine") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: update to 1.33.1Nick Hainke2021-05-145-132/+3
| | | | | | | | | | | | | | | Remove backports: - 001-backport1330fix-ash-make-strdup-copy.patch - 002-backport1330fix-traceroute.patch - 005-backport-CVE-2021-28831.patch Remove upstreamed: - 010-fix-wrong-variable.patch Signed-off-by: Nick Hainke <vincent@systemli.org> [don't use $(AUTORELEASE) for now] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 6713fe030fca32fc3d5ad9761f3b2f96501aedd6)
* kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4Hauke Mehrtens2021-05-1412-117/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FORTIFY_SOURCE=y is already set in the generic kernel configuration, but it is not working for MIPS on kernel 5.4, support for MIPS was only added with kernel 5.5, other architectures like aarch64 support FORTIFY_SOURCE already since some time. This patch adds support for FORTIFY_SOURCE to MIPS with kernel 5.4, kernel 5.10 already supports this and needs no changes. This backports one patch from kernel 5.5 and one fix from 5.8 to make fortify source also work on our kernel 5.4. The changes are not compatible with the 306-mips_mem_functions_performance.patch patch which was also removed with kernel 5.10, probably because of the same problems. I think it is not needed anyway as the compiler should automatically optimize the calls to memset(), memcpy() and memmove() even when not explicitly telling the compiler to use the build in variant. This increases the size of an uncompressed kernel by less than 1 KB. Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9ffa2f8193a43b9044fcfd0e16b204e989b0d941)
* mac80211/rtl: backport a rtl8192cu AP mode fixRui Salvaterra2021-05-141-0/+118
| | | | | | | | | | Running USB devices in AP mode is never a good idea. That said, fix the TIM issue in rtl8192cu [1], allowing these devices to "work" in AP mode. [1] https://patchwork.kernel.org/project/linux-wireless/patch/20210419065956.6085-1-pkshih@realtek.com/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit eeda8652f1655d4f9c11e9c9f51ddcd3377d119a)
* glibc: update to latest 2.33 HEAD (bug 27744)Hans Dedecker2021-05-141-2/+2
| | | | | | | | | | 3f5080aedd nptl: Do not build nptl/tst-pthread-gdb-attach as PIE 36783141cf nptl: Check for compatible GDB in nptl/tst-pthread-gdb-attach ea299b62e8 nptl_db: Support different libpthread/ld.so load orders (bug 27744) 162df872f0 x86: tst-cpu-features-supports.c: Update AMX check Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 2fc20886ec70d55a4e445689a849cfd1fab07750)
* ramips: fix mac addresses of Youku YK1Shiji Yang2021-05-142-3/+4
| | | | | | | | | | | | | | | MAC addresses read from official firmware value location Wlan xx 71 de factory@0x04 Lan xx 71 dd factory@0x28 Wan xx 71 df factory@0x2e Label xx 71 dd factory@0x28 Signed-off-by: Shiji Yang <yangshiji66@qq.com> [fix sorting in 02_network, redact commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit e57e460dc75836d3227e7370b9e64a0eabc9d91d)
* ipq40xx: fix hard_config partition size on MikroTik hAP-ac2Baptiste Jonglez2021-05-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The routerbootparts driver dynamically discovers the location of MikroTik partitions, but it cannot determine their size (except by extending them up to the start of the next discovered partition). The hard_config partition has a default size of 0x1000 in the driver, while it actually takes 0x2000 on the hAP-ac2. Set the correct size in the hAP-ac2 DTS. On most devices, this isn't a problem as the actual data fits in 0x1000 bytes. However, some devices have larger data that doesn't fit in 0x1000 bytes. In any case, all devices seen so far have enough space for a 0x2000 hard_config partition before the start of the dtb_config partition. With the current 0x1000 size: 0x00000000e000-0x00000000f000 : "hard_config" 0x000000010000-0x000000017bbc : "dtb_config" With this patch extending the size to 0x2000: 0x00000000e000-0x000000010000 : "hard_config" 0x000000010000-0x000000017bbc : "dtb_config" Other ipq40xx boards may need the same fix but it needs testing. References: https://forum.openwrt.org/t/support-for-mikrotik-hap-ac2/23333/324 Acked-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> (cherry picked from commit 979f4063668185182db7bd2ad4efe6010047765e)
* sdk: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archivesSven Roederer2021-05-141-1/+7
| | | | | | | | | | | | | | | | | Using these config-options to customize the folders used at build-time makes these folder settings appear in generated archive. This causes the SDK to be not portable, as it's going to use the build-time folders on the new systems. The errors vary from passing the build, disk out-of-space to permission denied. The build-time settings of these folders are passed into the archive via Config.build. The expected behavior is that the SDK acts after unpacking like these settings have their defaults, using intree folders. So just filter these folders out when running convert-config.pl to create Config.build. This addresses the same issue that's fixed in the previous commit for the imagebuilder. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> (cherry picked from commit 1e4b191ac8901328a726ebdc09ebe35da4363521)
* imagebuilder: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archiveSven Roederer2021-05-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | Using these config-options to customize the folders used at build-time makes these folder settings appear in generated archive. This causes the imagebuilder to be not portable, as it's going to use the build-time folders on the new systems. Errors look like: mkdir: cannot create directory '/mnt/build': Permission denied Makefile:116: recipe for target '_call_image' failed make[2]: *** [_call_image] Error 1 Makefile:241: recipe for target 'image' failed make[1]: *** [image] Error 2 The build-time settings of these folders are passed into the archives via .config file. The expected behavior is that after unpacking the imagebuilder acts like these settings have their defaults, using intree folders. So unset the build-time settings. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> (cherry picked from commit 6967903b01ea9f7c9f70d0185c3da276801dd78f)
* busybox: add SRV support to nslookup_lede.c patchPerry Melange2021-05-142-2/+22
| | | | | | | | | | | Add support for querying and parsing SRV DNS records to nslookup_lede.c This patch is based on http://lists.busybox.net/pipermail/busybox/2019-June/087359.html Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com> [reword subject, bump PKG_RELEASE] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 3a359398f04f3f4c4a42d1ca274bb1a0f0303e05)
* base-files: shinit: properly handle dashes in service namesJo-Philipp Wich2021-05-121-1/+1
| | | | | | Fixes: FS#3801 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 75ea878d1ba05610121a732dc0abf7c914e83ca1)
* generic: platform/mikrotik: release mtd device after useThibaut VARÈNE2021-05-122-2/+10
| | | | | | | | | | | | | The code uses get_mtd_device_nm() which must be followed by a call to put_mtd_device() once the handle is no longer used. This fixes spurious shutdown console messages such as: [ 2256.334562] Removing MTD device #7 (soft_config) with use count 1 Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 4e385a27d6c4aab62ef7fc9856f09ebee9632985)
* uqmi: fix network registration loopThomas Richard2021-05-112-10/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With some debug in qmi.sh using following patch, some errors are visible in the registration step @@ -29,6 +29,7 @@ proto_qmi_init_config() { } proto_qmi_setup() { + set -x local interface="$1" local dataformat connstat plmn_mode mcc mnc local device apn auth username password pincode delay modes pdptype @@ -224,6 +225,8 @@ proto_qmi_setup() { fi done + registration=$(uqmi -s -d "$device" --get-serving-system) + [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1 echo "Starting network $interface" During the boot of the system, modem could not start automatically its network registration. netifd: wan (9235): + echo 'Waiting for network registration' netifd: wan (9235): Waiting for network registration netifd: wan (9235): + local 'registration_timeout=0' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + grep '"searching"' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' netifd: wan (9235): + '[' -n ] netifd: wan (9235): + echo 'Starting network wan' As the while loop checks only "searching" pattern, uqmi.sh script quits searching loop and continues whereas the modem is not registered Other issue, after X seconds modem stops searching. netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] netifd: wan (9213): + let registration_timeout++ netifd: wan (9213): + sleep 1 netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + registration='{"registration":"not_registered"}' netifd: wan (9213): + '[' -n ] netifd: wan (9213): + echo 'Starting network wan' netifd: wan (9213): Starting network wan If registration_timeout is not expired, registration can be restarted Signed-off-by: Thomas Richard <thomas.richard@kontron.com> Tested-by: Florian Eckert <fe@dev.tdt.de> (cherry picked from commit 2eda042d553c23590c9d6ade8a1a17ffcfb4be7c)
* kernel: fix parsing fixed subpartitionsRafał Miłecki2021-05-084-8/+84
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ed4641e9f1ad940cb60187dea09cf17c865efcaf)
* Extend checks on build prerequisites for building OpenWRT coreBas Mevissen2021-05-081-1/+12
| | | | | | | | | | | | | | OpenWRT requires a number of Perl modules to be installed. It wasn't checking on all of them. This patch adds checks for Perl FindBin, File::Copy, File::Compare and Thread::Queue modules. Failing to install these, will have the build break at some point. By adding these to the prereq-build.mk script, they are checked on forehand. Tested on a Fedora 33 and 34 (beta) that was freshly installed. Fedora appears to break up Perl modules into small packages that need to be installed for the build to succeed. Signed-off-by: Bas Mevissen <abuse@basmevissen.nl> (cherry picked from commit f68c9474acf9a65b5a9538db8e45c173462487e3)
* kernel: bump 5.4 to 5.4.117Hauke Mehrtens2021-05-072-3/+3
| | | | | | | | | All updated automatically. Compile-tested on: x86/64, armvirt/32, ath79/generic Runtime-tested on: x86/64, armvirt/32, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tplink-safeloader: fix product_name of TP-Link AD7200Alex Henrie2021-05-061-1/+1
| | | | | | | | | | | | | | | The stock firmware does not accept firmware with "Talon" in the name. Tested on firmware version 1.0.10 Build 20160902 rel. 57400 which came preinstalled, as well as latest firmware version 2.0.1 Build 20170103 rel.71053 flashed from AD7200v1-up-ver2-0-1-P1[20170103-rel71053]_2017-01-04_10.08.28.bin. Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200") Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> [added details about vendor firmware] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit dfef88b6cacceec151ca4ce4bb3dc50c1c5cf1d2)
* dnsmasq: Update to version 2.85Alan Swanson2021-05-054-92/+6
| | | | | | | | | | | | | | | | | | | | | | Fixes issue with merged DNS requests in 2.83/2.84 not being retried on the firsts failed request causing lookup failures. Also fixes the following security problem in dnsmasq: * CVE-2021-3448: If specifiying the source address or interface to be used when contacting upstream name servers such as: server=8.8.8.8@1.2.3.4, server=8.8.8.8@1.2.3.4#66 and server=8.8.8.8@eth0 then all would use the same socket bound to the explicitly configured port. Now only server=8.8.8.8@1.2.3.4#66 will use the explicitly configured port and the others random source ports. Remove upstreamed patches and update remaining patch. Signed-off-by: Alan Swanson <reiver@improbability.net> [refreshed old runtime support patch] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 3980daffa4e284377cd1ae803fba78331c1fc40b)
* ltq-dsl-base: Make package nonshared to fix image builderHauke Mehrtens2021-05-041-0/+2
| | | | | | | | | | | This package depends on the lantiq target and is only build for that target. A normal package would be build by the SDK builder probably under a different target and then this package will not be selected. Mark it as nonshared to build it when the lantiq target gets build. Fixes: FS#3773, FS#3774 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 454d514f4647d6f1f0d93d8f67abdef94cd66a7d)
* mac80211: Update to version 5.10.34-1Hauke Mehrtens2021-05-0421-188/+48
| | | | | | | The removed patches were applied upstream and are not needed anymore. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 17ac9849d3ff687c8c14d63e46f3e205adc22a3e)
* busybox: backport fix for CVE-2021-28831Hauke Mehrtens2021-05-042-1/+53
| | | | | | | | | | This backports a fix for the low priority CVE-2021-28831: decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 13397b2b95b4800fb0a29c3d483fa280d10f0eb0)
* ipq40xx: add support for MikroTik SXTsq 5 acRoger Pueyo Centelles2021-05-039-3/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit d1f1e5269ed992e6fc30d575b43b0913c9e58ca2) [Compile and Run Tested] Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: add MikroTik hAP ac2 supportRobert Marko2021-05-038-1/+316
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBD52G-5HacD2HnD-TC (hAP ac²), a indoor dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional antennae, USB port and five 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/hap_ac2 for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 5x 1000/100/10 port, passive PoE in - 1x USB Type A port Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit faea7becafc634dc882f0ad8f9388862ccd5bd0d) [Compile Tested] Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: force SGMII SerDes mode to MAC operationDavid Bauer2021-05-032-0/+14
| | | | | | | | | | | | | | | | | | The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit fbbad9a9a629b388626b477e6cd692c160f63fb3)
* ath79: fix USB power on TP-Link TL-WR810N v1Tom Stöveken2021-05-021-0/+1
| | | | | | | | | | | | Before: Kernel reported "usb_vbus: disabling" and the USB was not providing power After: USB power is switched on, peripheral is powered from the device Signed-off-by: Tom Stöveken <tom@naaa.de> [squash and tidy up] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a6f7268dc7519b57251532fe4239412e8acf4ca7)
* kernel: bump 5.4 to 5.4.114Hauke Mehrtens2021-05-0219-111/+122
| | | | | | | | | | | | | | | | | | | | | | | Removed because in upstream* mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Manually rebased* generic/backport-5.4/700-v5.5-net-core-allow-fast-GRO-for-skbs-with-Ethernet-heade.patch Added new backport* generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch All others updated automatically. The new backport was included based on this[1] upstream commit that will be mainlined soon. This change is needed because Eric Dumazet's check for NET_IP_ALIGN (landed in 5.4.114) causes huge slowdowns on drivers which use napi_gro_frags(). Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: mikrotik: swap RB922UAGS-5HPaCD eth0/1 MACsRoger Pueyo Centelles2021-04-301-0/+5
| | | | | | | | | | | | Since support for SFP on the MikroTik RouterBOARD 922UAGS-5HPacD was added by 4387fe00cb, the MAC addresses for eth0 (Ethernet) and eth1 (SFP) were swapped. This patch fixes the 02_network script to assign MAC addresses correctly, so they match the label and the vendor's OS. Tested on a RouterBOARD 922UAGS-5HPacD board. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 14a95b36b1ecd038fffc279878c5a4c51043d709)
* ath79: mikrotik: enable SFP on RB922UAGS-5HPaCDRoger Pueyo Centelles2021-04-304-2/+51
| | | | | | | | | | | | | | | | | This patch enables the SFP cage on the MikroTik RouterBOARD 922UAGS-5HPacD. GPIO16 (tx-disable-gpios) should be governed by the SFP driver to enable or disable transmission, but no change is observed. Therefore, it is left as output high to ensure the SFP module is forced to transmit. Tested on a RouterBOARD 922UAGS-5HPacD board, with a CISCO GLC-LH-SMD 1310nm module and an unbranded GLC-T RJ45 Gigabit module. PC=>router iperf3 tests deliver 440/300 Mbps up/down, both via regular eth0 port or SFP port with RJ45 module. Bridge between eth0 and eth1 delivers 950 Mbps symmetric. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 4387fe00cb7536d9d341f6d27e465ff0f0b29b1b)
* mac80211: minstrel_ht: fix issue in calculating success probabilityFelix Fietkau2021-04-281-0/+21
| | | | | | | | Missing braces in a macro were leading to badly working rates sometimes getting a success probabilty of 1.0 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 12cb52bd0665da33cb5dc64697f1751a8b33fb05)
* kernel: drop the conntrack rtcache patchRui Salvaterra2021-04-224-566/+8
| | | | | | | | | | | It's in backports-5.4, but it wasn't ever merged. Upstream followed another approach, with flow offloading, which has much better performance. Drop this obsolete patch and refresh the kernel patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 17576b1b2aeacf0a23bb9a911d675bd324754745)
* ltq-vdsl-app: extent dsl metrics with state_num and power_state_numFlorian Eckert2021-04-191-14/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the old ubus dsl API, the numbers for the individual line_states and power_states were also returned. These were not ported to the new DSL C-API. This commit adds the missing information. For this the internal values are mapped to numbers. * additional JSON output for state_num: "state_num": <map_state_number> Since not all values are meaningful only the following values are implemented, this can be extended if the future. * LSTATE_MAP_NOT_INITIALIZED * LSTATE_MAP_EXCEPTION * LSTATE_MAP_IDLE * LSTATE_MAP_SILENT * LSTATE_MAP_HANDSHAKE * LSTATE_MAP_FULL_INIT * LSTATE_MAP_SHOWTIME_NO_SYNC * LSTATE_MAP_SHOWTIME_TC_SYNC * LSTATE_MAP_RESYNC * additinal JSON output for power_level: "power_state_num": <map_power_satte_number>, Since there are not so many here, all are mapped. * PSTATE_MAP_NA, * PSTATE_MAP_L0, * PSTATE_MAP_L1, * PSTATE_MAP_L2, * PSTATE_MAP_L3, Signed-off-by: Florian Eckert <fe@dev.tdt.de> v6: Add state LSTATE_MAP_NOT_INITILIZED at the beginning of the list Start the list LSTATE_MAP with -1 Reviewed-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 4407d45d9667ab3d376ad4a6b760e07f4dd43e49)
* lantiq: use ActualNetDataRate for speed reportingJeroen Peelaerts2021-04-192-1/+6
| | | | | | | | | | | | | | Switch to Actual Net Data Rate (ACTNDR) for speed reporting on lantiq VDSL modems Refer to ITU-T G.997.1 chapter 7.5.2.8 Independent whether retransmission is used or not in a given transmit direction: - In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. - In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 4f27ea7c33447f4b0c8e577509726927916b9625)
* lantiq: enable G.INP retransmission countersJeroen Peelaerts2021-04-192-3/+7
| | | | | | | | | | | | | | | | | This commit adds monitoring for a couple of DSL line features that are present in the lantiq firmware blobs. * G.INP ON/OFF * Trellis encoding ON/OFF * Virtaul Noise ON/OFF * Bitswap ON/OFF Difference in size for ltq-vdsl-app = 1k Difference in size for kmod-ltq-vdsl-vr9 < 1k Reviewed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com> (cherry picked from commit 48162e4c0c85a7f64d9007565bf5be2c7ace3ada)
* OpenWrt v21.02.0-rc1: revert to branch defaultsHauke Mehrtens2021-04-195-11/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc1: adjust config defaultsv21.02.0-rc1Hauke Mehrtens2021-04-195-10/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: allow writing to "u-boot-env2"Bjørn Mork2021-04-185-5/+0
| | | | | | | | | U-Boot uses the "bootpartition" variable stored in "u-boot-env2" to select the active system partition. Allow updates to enable system switching from OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 11d24ffe961570533a4fc54a7511d30c17290623)
* realtek: rename partitions in Netgear DTSIStijn Segers2021-04-181-5/+5
| | | | | | | | | | Switch the Netgear DTSI for the Realtek target from the OEM partition naming scheme to accepted OpenWrt naming practices. A quick git grep for 'u-boot-env' e.g. in the OpenWrt tree turns up almost 500 hits whereas grepping for 'bdinfo' (the OEM equivalent) returns a meagre 14. Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 1601b39b6197963e85c441a043702e022779f371)
* realtek: add ZYXEL_VERS to DEVICE_VARSAdrian Schmutzler2021-04-181-0/+2
| | | | | | | | | Otherwise, the last defined value will be set for all devices. Fixes: c6c8d597e183 ("realtek: Add generic zyxel_gs1900 image definition") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 851dadc257b7223f879a3733507e83cfcaae1af1)
* realtek: enable SerDes NWAY and SGMII negotiationBjørn Mork2021-04-182-3/+42
| | | | | | | | This allows copper SFPs to negotiate speeds lower than 1gig. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 963b2ae702510c11e912c9438fdb9222763a22d5)
* realtek: enabled Marvell and Realtek PHYsBjørn Mork2021-04-181-0/+2
| | | | | | | | | | | The rtl83xx-phy driver is necessary for proper configuration of the PHYs if U-Boot hasn't done that. 1000Base-T SFPs often contains a Marvell 88E1111 and will not work without this driver. Include it by default to support copper SFPs. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 07bf5aaa4c12d6e7eb797b3871a7586f90a46e67)
* realtek: enable HWMON for SFP sensorsBjørn Mork2021-04-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds SFP sensors as a hwmon device, allowing readout of temperatures, DOM and other sensor readings available from the SFP. Example from a ZyXEL GS1900-10HP with a DOM capable 1000Base-SX SFP: root@gs1900-10hp:~# grep . /sys/class/hwmon/hwmon0/* /sys/class/hwmon/hwmon0/curr1_crit:90 /sys/class/hwmon/hwmon0/curr1_crit_alarm:0 /sys/class/hwmon/hwmon0/curr1_input:4 /sys/class/hwmon/hwmon0/curr1_label:bias /sys/class/hwmon/hwmon0/curr1_lcrit:0 /sys/class/hwmon/hwmon0/curr1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/curr1_max:85 /sys/class/hwmon/hwmon0/curr1_max_alarm:0 /sys/class/hwmon/hwmon0/curr1_min:0 /sys/class/hwmon/hwmon0/curr1_min_alarm:0 /sys/class/hwmon/hwmon0/in0_crit:3795 /sys/class/hwmon/hwmon0/in0_crit_alarm:0 /sys/class/hwmon/hwmon0/in0_input:3317 /sys/class/hwmon/hwmon0/in0_label:VCC /sys/class/hwmon/hwmon0/in0_lcrit:2805 /sys/class/hwmon/hwmon0/in0_lcrit_alarm:0 /sys/class/hwmon/hwmon0/in0_max:3465 /sys/class/hwmon/hwmon0/in0_max_alarm:0 /sys/class/hwmon/hwmon0/in0_min:3135 /sys/class/hwmon/hwmon0/in0_min_alarm:0 /sys/class/hwmon/hwmon0/name:sfp_p10 /sys/class/hwmon/hwmon0/power1_crit:708 /sys/class/hwmon/hwmon0/power1_crit_alarm:0 /sys/class/hwmon/hwmon0/power1_input:259 /sys/class/hwmon/hwmon0/power1_label:TX_power /sys/class/hwmon/hwmon0/power1_lcrit:89 /sys/class/hwmon/hwmon0/power1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power1_max:501 /sys/class/hwmon/hwmon0/power1_max_alarm:0 /sys/class/hwmon/hwmon0/power1_min:126 /sys/class/hwmon/hwmon0/power1_min_alarm:0 /sys/class/hwmon/hwmon0/power2_crit:1259 /sys/class/hwmon/hwmon0/power2_crit_alarm:0 /sys/class/hwmon/hwmon0/power2_input:404 /sys/class/hwmon/hwmon0/power2_label:RX_power /sys/class/hwmon/hwmon0/power2_lcrit:6 /sys/class/hwmon/hwmon0/power2_lcrit_alarm:0 /sys/class/hwmon/hwmon0/power2_max:794 /sys/class/hwmon/hwmon0/power2_max_alarm:0 /sys/class/hwmon/hwmon0/power2_min:10 /sys/class/hwmon/hwmon0/power2_min_alarm:0 /sys/class/hwmon/hwmon0/temp1_crit:100000 /sys/class/hwmon/hwmon0/temp1_crit_alarm:0 /sys/class/hwmon/hwmon0/temp1_input:22547 /sys/class/hwmon/hwmon0/temp1_label:temperature /sys/class/hwmon/hwmon0/temp1_lcrit:-50000 /sys/class/hwmon/hwmon0/temp1_lcrit_alarm:0 /sys/class/hwmon/hwmon0/temp1_max:85000 /sys/class/hwmon/hwmon0/temp1_max_alarm:0 /sys/class/hwmon/hwmon0/temp1_min:-40000 /sys/class/hwmon/hwmon0/temp1_min_alarm:0 /sys/class/hwmon/hwmon0/uevent:OF_NAME=sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_FULLNAME=/sfp-p10 /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_0=sff,sfp /sys/class/hwmon/hwmon0/uevent:OF_COMPATIBLE_N=1 Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 2a912fb63adc3fb3a1ee746589f6df4bb02e4296)
* realtek: re-enable sfp driver for ZyXEL GS1900-10HPBjørn Mork2021-04-181-18/+6
| | | | | | | | | | | | | | There is no need to define a static link or a phy for the sfp ports. Using phy-mode and managed properties to describe the link to the sfp phy. We have to keep the now unconnected virtual "phys" because the switch driver uses their "phy-is-integrated" property to figure out which ports to enable as fibre ports. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit e8d391bd4650418182d96ca06ccd10d636efcbc3)
* realtek: need to handle PHY_INTERFACE_MODE_NA for sfpsBjørn Mork2021-04-181-0/+1
| | | | | | | | | | | From the validate docs in include/linux/phylink.h: When state->interface is PHY_INTERFACE_MODE_NA, phylink expects the MAC driver to return all supported link modes. Tested-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit 785d830e889ba18793acf369e447d704269169af)
* realtek: fix link-state interruptBjørn Mork2021-04-181-4/+3
| | | | | | | | This bug was the root cause for the failing sfp driver. Acked-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit b8e473d18c6af2abf0d047247fdbe6d178228ac0)
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-04-183-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit e6ba970b6ef2289a2a4d3dd6c0c158ee8d10160f)
* realtek: Add generic zyxel_gs1900 image definitionHauke Mehrtens2021-04-181-13/+13
| | | | | | | | Add a new common device definition for the Zyxel GS1900 line of switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit c6c8d597e18300cd679bf5ea88a46ed18709da01)
* realtek: drop ethtool log noiseBjørn Mork2021-04-182-15/+15
| | | | | | | | | | | | | | Demote a number of debugging printk's to pr_debug to avoid log nosie. Several of these functions are called as a result of userspace activity. This can cause a lot of log noise when userspace does periodic polling. Most of this could probably be removed completely, but let's keep it for now since these drivers are still in development. Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit ba220ad2fd915aaed2e9c850a84078c5c5977d3e)
* uboot-envtools: add support for ZyXEL GS-1900-8HP v1 and v2Stijn Segers2021-04-181-0/+2
| | | | | | | This adds the necessary nuts and bolts for the uboot settings for both the ZyXEL GS1900-8HP v1 and v2. Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit b5bc53813d28cb4229f9800a36c1e600a239e6a9)
* base-files: fix status display commandAlexander Egorenkov2021-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | If service() is called w/o parameter then the status display for services with multiple instances is incorrect. E.g. samba4 or wpad have 2 instances. root@OpenWrt:~# /etc/init.d/samba4 status running root@OpenWrt:~# /etc/init.d/wpad status running Before change: /etc/init.d/samba4 enabled stopped /etc/init.d/wpad enabled stopped After change: /etc/init.d/samba4 enabled running /etc/init.d/wpad enabled running Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net> (cherry picked from commit 9318f61556c5443eb66eec7e26715b00f0df86fc)
* zram-swap: bail out early if the kernel doesn't support swapRui Salvaterra2021-04-181-0/+5
| | | | | | | | | Since KERNEL_SWAP is only enabled by default for !SMALL_FLASH targets, we need to check if the current kernel supports swap before trying to configure zram-swap, as opkg can't check for kernel dependencies. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 565dfeb1280343fb3f838581169e5d7a1c947862)
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 06:39:17 +0000