aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bcm63xx: pinctrl: fix BCM6348 groupsDaniel González Cabanelas2021-02-233-30/+14
| | | | | | | | | | | | | | | | | | | | | The current driver has some troubles: - Some groupings are wrong. - The pinctrl group0 owns pins never used (at least in Openwrt) for any pinmux. The driver hijacks all the pins on the group avoiding any other use, spite they're free. I.e. for buttons, causing this kernel error: [ 4.735928] gpio-keys-polled keys: unable to claim gpio 479, err=-22 [ 4.742642] gpio-keys-polled: probe of keys failed with error -22 - Minor errors about groupings on the documentation - Missing "diag" grouping in dtsi - Wrong groupings in dtsi Fix it by setting the correct groups. And relax the pin capturing, letting the gpios belonging to any group to be used for other purposes like buttons. This was the behavior with stock firmwares and old OpenWrt versions which never caused any trouble. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (Cherry-picked from commit 50cb3a750f)
* bcm63xx: limit name metadata to model nameÁlvaro Fernández Rojas2021-02-231-5/+1
| | | | | | | | Since there are only 16 characters available, on most cases the vendor name will fit in the metadata, but the model name won't fit. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit c27532742d)
* image: add ModelNameLimit16Álvaro Fernández Rojas2021-02-231-0/+4
| | | | | | | This script returns the model name limited to 16 characters. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from 1235ea7c20)
* ramips: fix Phicomm PSG1218A switch port labelsShiji Yang2021-02-221-1/+1
| | | | | | | | | The lan port sequence was reversed compared to the labels. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 567a88e4b99f9e1b647588de0319357e688ce016)
* ramips: correct/add Phicomm K2x WAN/label MAC addressShiji Yang2021-02-221-4/+4
| | | | | | | | | | | | | | | Phicomm K2G: add missing label_mac Phicomm PSG1218A & PSG1218B: The previous wan mac was set as factory@0x28 +1 (originally based on the default case for the ramips target), but the correct wan mac is factory@0x28 -1, being equal to factory@0x2e. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 55263ffedbe1d20f005febbc973a7353240d1741)
* bcm63xx: bcm63268: fix GPIO interruptsÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | | | | pinctrl should rely on external interrupt controller for GPIO interrupts. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 36e35b8d81)
* scripts: getver.sh: fix version based on stable branchBaptiste Jonglez2021-02-211-1/+1
| | | | | | | | | | | | | | | When building from a local branch based off the "openwrt-21.02" branch, version computation is wrong, because the number of local commits is computed against master. As a result, it wrongly counts *all* commits since the beginning of the openwrt-21.02 branch as local commits. The fix is to compare to the openwrt-21.02 branch instead, which gives the expected result. A similar change had been applied to the openwrt-19.07 branch: 891022918d55 ("scripts: getver.sh: fix version based on stable branch") Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* tfa-layerscape: build fiptool againAdrian Schmutzler2021-02-212-3/+8
| | | | | | | | | | | | | | | | | | The ls-ddr-phy package needs fiptool options that are not available via the version from arm-trusted-firmware-tools. This breaks build for layerscape with the recently added LX2160a: create: unrecognized option '--ddr-immem-udimm-1d' Use the tfa-layerscape variant again for now, but rename it to fiptool-layerscape to indicate that it's a specific variant. This reverts 84bc7d31e0a8 ("tfa-layerscape: don't build fiptool"). Fixes: f59d7aab2a37 ("layerscape: add ddr-phy package") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 910b5d669f907656c6af14242db2482be6a79323)
* bcm27xx: remove urngd packageÁlvaro Fernández Rojas2021-02-201-0/+2
| | | | | | | Now that khwrngd is working on all subtargets we can remove urgnd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 9dc84018ee)
* bcm27xx: enable bcm2711 HW RNGÁlvaro Fernández Rojas2021-02-203-0/+27
| | | | | | | Also add a patch setting its quality, which should make it usable by khwrngd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 670526efa3)
* generic: add bcm2835-rng quality patchÁlvaro Fernández Rojas2021-02-201-0/+26
| | | | | | | | This patch allows devices without a high resolution timer to boot up faster. It should speed up boots for bcm2708 and bcm63xx. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 7747b3fa36)
* openwrt-keyring: add OpenWrt 21.02 GPG/usign keysPetr Štetiar2021-02-201-3/+3
| | | | | | | | 49283916005d usign: add 21.02 release build pubkey bc4d80f064f2 gpg: add OpenWrt 21.02 signing key Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 1bf6d70e60fdb45d81a8f10b90904cef38c73f70)
* hostapd: backport ignoring 4addr mode enabling errorRaphaël Mélotte2021-02-203-38/+79
| | | | | | | | | | | | | | | | | | | | | This is a backport of the upstream commit 58bbbb598144 ("nl80211: Ignore 4addr mode enabling error if it was already enabled") which fixes same issue as in the current fix contained in '130-wpa_supplicant-multi_ap_roam.patch', but in a different way: nl80211_set_4addr_mode() could fail when trying to enable 4addr mode on an interface that is in a bridge and has 4addr mode already enabled. This operation would not have been necessary in the first place and this failure results in disconnecting, e.g., when roaming from one backhaul BSS to another BSS with Multi AP. Avoid this issue by ignoring the nl80211 command failure in the case where 4addr mode is being enabled while it has already been enabled. Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be> [bump PKG_RELEASE, more verbose commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit fb860b4e418c28a0f388f215e5acce103dcee1bf)
* ramips: overwrite reset gpio properties in EX6150 DTSStijn Segers2021-02-201-0/+3
| | | | | | | | | | | | | | | | The Netgear EX6150 can, just like the D-Link DIR-860L rev B1, fail to initialise both radios in some cases. Add the reset GPIOs explicitly so the PCI-E devices get re-initialised properly. See also FS #3632. Error shows up in dmesg as follows: [ 1.560764] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) Tested-by: Kurt Roeckx <kurt@roeckx.be> Signed-off-by: Stijn Segers <foss@volatilesystems.org> [removed period from commit title] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit af1b6799c6ec9af7a30d63a5ddfed20f443b991c)
* layerscape: add new devices in README and clean upYangbo Lu2021-02-191-33/+70
| | | | | | | | | | Support new devices LS1046AFRWY and LX2160ARDB in README. Clean up README, and add missing LS1021ATWR deploy guide. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [adjust set of devices added, update commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a31842e7fd15c14796a9f764defda395b3c854df)
* layerscape: add LX2160ARDB (Rev2.0 silicon) board supportYangbo Lu2021-02-199-7/+120
| | | | | | | | | | | | | | | | | | | | | | | The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 80dcd14abeed8cd808b92bb307964dbaeb252144)
* layerscape: add ddr-phy packageYangbo Lu2021-02-191-0/+50
| | | | | | | | | | Add ddr-phy package for layerscape. Currently only LX2160ARDB requires the package. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit f59d7aab2a374d27abfdc50348d855db5560db8f)
* layerscape: add FRWY-LS1046A board supportYangbo Lu2021-02-197-3/+97
| | | | | | | | | | | | | | | | | | | | The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 2c2d77bd3bd4691c5f8f1760b9ef16f96f345255)
* layerscape: move rework-sdcard-images out of fsl-sdbootAdrian Schmutzler2021-02-192-2/+6
| | | | | | | | Upcoming devices will not need the migration setup, so let's move it out of the common definition. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a9075d42d7990af230a08bdbb03c14ae2bf27318)
* ramips: use lzma-loader for Wevo devicesSeo Suchan2021-02-191-0/+2
| | | | | | | | | | | As kernel size increased it start to fail to load squishfs image, using lzma-loader fixed it. wevo_11acnas is almost same device as w2914ns-v2 except ram size, so I expect same thing would've happen in that device too. Signed-off-by: Seo Suchan <abnoeh@mail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit ca6954e2dc3faa32eec54b93bda996c874409675)
* ramips: mt7621: add TP-Link EAP235-Wall supportSander Vanheule2021-02-194-0/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TP-Link EAP235-Wall is a wall-mounted, PoE-powered AC1200 access point with four gigabit ethernet ports. When connecting to the device's serial port, it is strongly advised to use an isolated UART adapter. This prevents linking different power domains created by the PoE power supply, which may damage your devices. The device's U-Boot supports saving modified environments with `saveenv`. However, there is no u-boot-env partition, and saving modifications will cause the partition table to be overwritten. This is not an issue for running OpenWrt, but will prevent the vendor FW from functioning properly. Device specifications: * SoC: MT7621DAT * RAM: 128MiB * Flash: 16MiB SPI-NOR * Wireless 2.4GHz (MT7603EN): b/g/n, 2x2 * Wireless 5GHz (MT7613BEN): a/n/ac, 2x2 * Ethernet: 4× GbE * Back side: ETH0, PoE PD port * Bottom side: ETH1, ETH2, ETH3 * Single white device LED * LED button, reset button (available for failsafe) * PoE pass-through on port ETH3 (enabled with GPIO) Datasheet of the flash chip specifies a maximum frequency of 33MHz, but that didn't work. 20MHz gives no errors with reading (flash dump) or writing (sysupgrade). Device mac addresses: Stock firmware uses the same MAC address for ethernet (on device label) and 2.4GHz wireless. The 5GHz wireless address is incremented by one. This address is stored in the 'info' ('default-mac') partition at an offset of 8 bytes. From OEM ifconfig: eth a4:2b:b0:...:88 ra0 a4:2b:b0:...:88 rai0 a4:2b:b0:...:89 Flashing instructions: * Enable SSH in the web interface, and SSH into the target device * run `cliclientd stopcs`, this should return "success" * upload the factory image via the web interface Debricking: U-boot can be interrupted during boot, serial console is 57600 baud, 8n1 This allows installing a sysupgrade image, or fixing the device in another way. * Access serial header from the side of the board, close to ETH3, pin-out is (1:TX, 2:RX, 3:GND, 4:3.3V), with pin 1 closest to ETH3. * Interrupt bootloader by holding '4' during boot, which drops the bootloader into its shell * Change default 'serverip' and 'ipaddr' variables (optional) * Download initramfs with `tftpboot`, and boot image with `bootm` # tftpboot 84000000 openwrt-initramfs.bin # bootm Revert to stock: Using the tplink-safeloader utility from the firmware-utils package, TP-Link's firmware image can be converted to an OpenWrt-compatible sysupgrade image: $ ./staging_dir/host/bin/tplink-safeloader -B EAP235-WALL-V1 \ -z EAP235-WALLv1_XXX_up_signed.bin -o eap235-sysupgrade.bin This can then be flashed using the OpenWrt sysupgrade interface. The image will appear to be incompatible and must be force flashed, without keeping the current configuration. Known issues: - DFS support is incomplete (known issue with MT7613) - MT7613 radio may stop responding when idling, reboot required. This was an issue with the ddc75ff704 version of mt76, but appears to have improved/disappeared with bc3963764d. Error notice example: [ 7099.554067] mt7615e 0000:02:00.0: Message 73 (seq 1) timeout Hardware was kindly provided for porting by Stijn Segers. Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit 1e75909a35a2b361cdfdfcf18a26ad61271b174e)
* ramips: remove factory image for TP-Link Archer C20 v1Stijn Segers2021-02-191-0/+1
| | | | | | | | | | | | | Similarly to the Archer C2 v1, the Archer C20 v1 will brick when one tries to flash an OpenWrt factory image through the TP-Link web UI. The wiki page contains an explicit warning about this [1]. Disable the factory image altogether since it serves no purpose. [1] https://openwrt.org/toh/tp-link/tp-link_archer_c20_v1#installation Signed-off-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 0265cba40ad4f2b8ff4473ada123c35b53ffd97a)
* bcm63xx: update ethernet kernel panics fixÁlvaro Fernández Rojas2021-02-197-34/+54
| | | | | | | | Use new patch from Sieng Piaw Liew. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 31a06f8fcc)
* cypress-firmware: fix PKG_SOURCE_URLÁlvaro Fernández Rojas2021-02-191-1/+1
| | | | | | | Download link has been moved. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 7febba3e50)
* bcm27xx: add diag LEDsÁlvaro Fernández Rojas2021-02-191-0/+7
| | | | | | | | We can now use the power LED for diag in more devices thanks to the latest patches from the RPi foundation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 5bab472a11)
* bcm27xx: bcm2708: add missing RPi B DTS fileÁlvaro Fernández Rojas2021-02-191-1/+1
| | | | | | | | | RPI 1B DTS has been splitted into 2 files: - bcm2708-rpi-b.dts: Newest (rev2) RPI 1B - bcm2708-rpi-b-rev1.dts: Old (rev1) RPI 1B Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 0aaa2cce1c)
* bcm27xx: add support for RPI CM4 and RPI 400Álvaro Fernández Rojas2021-02-192-6/+13
| | | | | | | Support added to bcm2709 (32 bits) and bcm2711 (64 bits). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 8ad61118fd)
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2021-02-192-77/+2
| | | | | | | Adds some fixes and removes upstreamed patch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit 1d3a9b1c00)
* bcm27xx-gpu-fw: update to latest versionÁlvaro Fernández Rojas2021-02-191-15/+15
| | | | | | | This is needed to add support for CM4 and RPI 400. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit f41e653da9)
* bcm27xx: import latest patches from the RPi foundationÁlvaro Fernández Rojas2021-02-19927-703/+41630
| | | | | | | | | | bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit f07e572f64)
* kernel: bump 5.4 to 5.4.99John Audia2021-02-1932-91/+89
| | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. No manual changes needed. Build system: x86_64 Build-tested: bcm27xx/bcm2711 Signed-off-by: John Audia <graysky@archlinux.us> (cherry-picked from commit 5d3a6fd970)
* build: fix ABI version for PROVIDES symbolsFelix Fietkau2021-02-181-1/+1
| | | | | | | | | GetABISuffix does not work for intra-package ABI version of provided symbols, since ABIV_$(provided) is not set. Fix ABI version by using $(ABIV_$(1)) directly Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 0db9d118657d)
* mediatek: add support for Ubiquiti UniFi 6 LRDavid Bauer2021-02-186-2/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- MediaTek MT7622 512MB DDR3 RAM 64M SPI-NOR Flash (Winbond W25Q512JV) MediaTek MT7622 802.11bgn 4T4R WMAC MediaTek MT7915 802.11ax 4T4R Marvell AQR1112 100/1000/2500 NBase-T PHY Holtek HT32F52241 LED controller Reset Switch UART ---- CPU UART0 at the pinout next to the Holtek MCU. Pinout (first pin next to SoC / MCU) 0 3V3 1 RX 2 TX 3 GND Settings are 115200 8N1. Opening the case ---------------- Opening the case is not a nice task, as itis glued together. Insert a flat knife between the front and back casing below the ethernet port. Open up a gap this way and insert a flat scredriver, remove the knife. Work your way around the casing by applying force to seperate the front and back casing. This losens the glue and opens the plastic clips. Be gentle, as these clips are very cheap and break quickly. Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Transfer the OpenWrt sysupgrade image to the device using SCP. 3. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 4. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock6 5. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock8 $ dd if=openwrt.bin of=/dev/mtdblock9 6. Reboot the device. It should boot into OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 634c13c186646aff2badb51a43b248825d0fe5a0)
* mediatek: add Ubiquiti LED driverDavid Bauer2021-02-185-0/+242
| | | | | | | | | | | | Add a driver for controlling the RGB LED via Ubiquitis own "LEDBAR" LED controller based on the Holtek HT32F52241 MCU. This driver is initially used by the Ubiquiti UniFi 6 LR, however judging from FCC pictures the MCU is also found on the U6-Mesh as well as the U6-Extender. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c9137e2ddf97ede1db399dc38acff26feb48ba7e)
* lantiq: fritz7320: enable USB power supplyMathias Kresin2021-02-181-0/+46
| | | | | | | | | | | | | The USB ports if a FRIZZ!Box 7320 do not supply power to connected devices. Add the GPIOs enabling USB power as regulator, to enable USB power supply as soon as the USB driver is loaded. Fixes FS#3624 Signed-off-by: Mathias Kresin <dev@kresin.me> (cherry picked from commit 6e4e97b2256327bb380ee2a83da9a1ddf657e395)
* openssl: bump to 1.1.1jEneas U de Queiroz2021-02-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes 4 security vulnerabilities/bugs: - CVE-2021-2839 - SSLv2 vulnerability. Openssl 1.1.1 does not support SSLv2, but the affected functions still exist. Considered just a bug. - CVE-2021-2840 - calls EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. - CVE-2021-2841 - The X509_issuer_and_serial_hash() function attempts to create a unique hash value based on the issuer and serial number data contained within an X509 certificate. However it was failing to correctly handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a potential denial of service attack. - Fixed SRP_Calc_client_key so that it runs in constant time. This could be exploited in a side channel attack to recover the password. The 3 CVEs above are currently awaiting analysis. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 482c9ff289c65480c8e7340e1740db24c62f91df)
* kernel: 5.4: fix .patch file extensionAdrian Schmutzler2021-02-171-0/+0
| | | | | | | | File extension was truncated for pending-5.4/770-11-net-ethernet-mtk_eth_soc-avoid-rearming-interrupt-if.pa Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 487b7ae5ebbbc76e0b2952658432d28eee07f7a2)
* ipq807x: drop targetAdrian Schmutzler2021-02-164-714/+0
| | | | | | This target is not ready for stable release yet. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: reorder more BuildPackages lines to deal with ABI_VERSIONFelix Fietkau2021-02-167-11/+13
| | | | | | | | After the ABI version rework, packages need to be declared in the order of their dependencies, so that dependent packages will use the right ABI version Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 75455b75a7ee)
* ath10k-ct: switch to 5.10Álvaro Fernández Rojas2021-02-167-103/+79
| | | | | | | | Let's switch to 5.10 now that mac80211 has been updated. Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit a5c4c40476)
* OpenWrt v21.02: set branch defaultsAlexander Couzens2021-02-163-12/+8
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* util-linux: move libuuid BuildPackage line further up to fix ABI versioningFelix Fietkau2021-02-161-1/+3
| | | | | | | After the ABI version rework, packages need to be declared in the order of their dependencies, so that dependent packages will use the right ABI version Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix getting ABI version for binary packages from the same source packageFelix Fietkau2021-02-151-1/+1
| | | | | | | We can't rely on the .version file being created yet, so use package variables to get it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to version 5.10.16-1Hauke Mehrtens2021-02-1512-185/+19
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Refresh patches againHauke Mehrtens2021-02-1514-110/+124
| | | | | | | A wrong quilt configuration was used last time. Fixes: ed1e234d87fc ("mac80211: refresh patches") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm4908: fix GPIOs support by limiting them to 64Rafał Miłecki2021-02-151-0/+23
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: use DTS patches sent upstreamRafał Miłecki2021-02-155-33/+145
| | | | | | | | There are 2 new patches: 1. Netgear R8000P switch ports 2. Netgear R8000P LEDs Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: filter out own packages on package version checkFelix Fietkau2021-02-151-2/+2
| | | | | | | This was accidentally dropped in 27a4a71c2408 ("metadata: handle ABI version rebuild tracking for transient dependencies") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/fakeroot: fix build regression on macOSFelix Fietkau2021-02-151-0/+42
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest version, set ABI_VERSION dynamicallyFelix Fietkau2021-02-151-6/+8
| | | | | | 2537be018587 cmake: add a possibility to set library version Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 13:40:36 +0000