aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: ar40xx: reset port status registerDavid Bauer2021-10-241-2/+1
| | | | | | | | This resolves incosnsitencies of the configured RX / TX flow control modes between different boards or bootloaders. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4d81f087715524994448ecaefd3ca87c8ba7e0a3)
* wolfssl: fix compile when enable-devcrypto is setIvan Pavlov2021-10-231-0/+22
| | | | | | | | fixing linking error when --enable-devcrypto=yes fixes: 7d92bb050961 wolfssl: update to 4.8.1-stable Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com> (cherry picked from commit be3e260f92643a841f4f83b03cbb07b9a26cff66)
* wolfssl: remove --enable-sha512 configure switchAndre Heider2021-10-231-2/+2
| | | | | | | | | | | It's the default anyway and this just looks confusing, as if it wasn't. Switch to AUTORELEASE while at it. The binary size is unchanged. Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 7cb5af30f48d6788cd471138820a772610a7f8e0)
* wolfssl: always build with --enable-reproducible-buildAndre Heider2021-10-231-0/+1
| | | | | | | | | | | | This gates out anything that might introduce semantically frivolous jitter, maximizing chance of identical object files. The binary size shrinks by 8kb: 1244352 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit c76300707e8d705d9efc7ed4bb1b7449d0a5fe00)
* ath79: mikrotik: use 64 KiB SPI NOR erase sectorsRoger Pueyo Centelles2021-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes CONFIG_MTD_SPI_NOR_USE_4K_SECTORS from the default symbols for the ath79/mikrotik target. MikroTik devices hold some of their user-configurable settings in the soft_config partition, which is typically sized 4 KiB, of the SPI NOR flash memory. Previously, in the ar71xx target, it was possible to use 64 KiB erase sectors but also smaller 4 KiB ones when needed. This is no longer the case in ath79 with newer kernels so, to be able to write to these 4 KiB small partitions without erasing 60 KiB around, the CONFIG_MTD_SPI_NOR_USE_4K_SECTORS symbol was added to the defaults. However, this ended up making sysupgrade images which were built with 64 KiB size blocks not to keep settings (e.g., the files under /etc/config/) over the flashing process. Using 4 KiB erase sector size on the sysupgrade images (by setting BLOCKSIZE = 4k) allows keeping settings over a flashing process, but renders the process terribly slow, possibly causing a user to mistakenly force a manual device reboot while the process is still on- going. Instead, ditching the 4 KiB erase sectors for the default 64 KiB erase size provides normal SPI write speed and sysupgrade times, at the expense of not being able to modify the soft_config partition (which is rarely a required thing). An OpenWrt patch for MTD_SPI_NOR_USE_4K_SECTORS_LIMIT may once have allowed to use different per-partition erase sector sizes. Due to changes on recent kernels it now only works on a per-device basis. Also, partial eraseblock write can be performed in ath79 with kernels 5.4 and lower, by copying the blocks from the 64 KiB, erasing the whole sector and restoring those blocks not meant to be modified. A kernel bump had that patch broken for a long time, but got fixed in bf2870c. Note: the settings in the soft_config partition can be reset to their defaults by holding the reset button for 5 seconds (and less than 10 seconds) at device boot. Fixes: FS#3492 (sysupgrade […] loses settings...) Fixes: a66eee63368e (ath79: add mikrotik subtarget) Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 68d91f08edd0efd47841a2e53d3437d570a61612)
* wolfssl: update to 4.8.1-stableIvan Pavlov2021-10-225-18/+24
| | | | | | | | | | | | | | Changes from 4.7.0: Fix one high (OCSP verification issue) and two low vulnerabilities Improve compatibility layer Other improvements and fixes For detailed changes refer to https://github.com/wolfSSL/wolfssl/releases Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com> (cherry picked from commit 7d92bb0509615550b98e2dc71091073c8258d564) [Added patch to allow compilation with libtool 2.4] Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: fix build with GCC 10 on 32 x86 targetsStijn Tintel2021-10-221-0/+123
| | | | | | | Backport upstream patch to fix build with GCC 10 on 32 x86 targets. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 718a4f47806da8f68cb8f1fe2ebecf403e14ae96)
* layerscape: Add missing config optionHauke Mehrtens2021-10-221-0/+1
| | | | | | | This option is not set when building the target. In master this is also unset. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* layerscape: Fix build in dtbHauke Mehrtens2021-10-2223-64/+37
| | | | | | | | | This fixes a kernel build problem. The removed parts of the patch are already applied upstream. Fixes: b4ed8a92751f ("kernel: bump 5.4 to 5.4.154") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9501ce909f54b87dab95f17c0408a4962365e130)
* ncurses: add tmux terminfoJitao Lu2021-10-211-1/+3
| | | | | | | | | | | They're preferred terminal descriptions for tmux, with additional support to some special characters and italic fonts. More info can be found at: https://github.com/tmux/tmux/wiki/FAQ Fixes: FS#3404 Signed-off-by: Jitao Lu <dianlujitao@gmail.com> (cherry picked from commit 917126ff4cfb1ea4795cfc93820ed5d304b084c3)
* ncurses: add screen-256color terminfoPaul Spooren2021-10-211-1/+2
| | | | | | | | The terminfo is required by the popular terminal multiplexer screen and tmux, offer it by default as the size impact is minimal with 885 Bytes. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 6a6b5a677e8c245f6c82ad40cc718e614aa9f7a1)
* ncurses: split long line of supported terminfoPaul Spooren2021-10-211-1/+12
| | | | | | | | The terminfo files were all in one row which is terrible to read. Split them over multiple lines to improve readability. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 75ea474b9002c758e9a23023f7636258a467704c)
* glibc: update to latest 2.33 HEAD (bug 28213)Hans Dedecker2021-10-211-2/+2
| | | | | | | | | | | 9b01145592 MIPS: Setup errno for {f,l,}xstat 9c676ef514 RISC-V: Update rv64 ULPs c6cadbf83a linux: Remove shmmax check from tst-sysvshm-linux 22d37364ae librt: add test (bug 28213) 27a78fd712 librt: fix NULL pointer dereference (bug 28213) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit c6a2ffd505cf7b8ce7ea0424a7709bb8f73e6999)
* tools/isl: update the download URLRui Salvaterra2021-10-211-1/+1
| | | | | | | | | | isl.gforge.inria.fr has been dead since early this month [1]. Switch to libisl.sourceforge.io for the time being. [1] https://groups.google.com/g/isl-development/c/JGaMo2VUu_8 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit dd0ad9b661b604163d1736fcfe18714ff47c3728)
* ath10k-ct: update to version from 2021-09-22Andrew Robbins2021-10-212-4/+4
| | | | | | | | | Add in a fix for 160Mhz dfs on 5.10 and higher. Add support for 5.13 and 5.15 kernels. Add of_get_mac_address support for 5.15 driver. Signed-off-by: Andrew Robbins <andrew@robbinsa.me> (cherry picked from commit 1d2bc94f786434e89bc87003b2a2202e92ad84e7)
* tools/m4: update to 1.4.19Rosen Penev2021-10-203-145/+2
| | | | | | | Remove upstreamed patches. Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit fc9682ed3961e098ace708ca1ca41c2239a4e2ee)
* kernel: bump 5.4 to 5.4.154Hauke Mehrtens2021-10-2032-1720/+70
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* wolfssl: bump PKG_RELEASEDavid Bauer2021-10-191-1/+1
| | | | | | Fixes commit 4b212b1306a9 ("wolfssl: build with WOLFSSL_ALT_CERT_CHAINS") Signed-off-by: David Bauer <mail@david-bauer.net>
* wolfssl: build with WOLFSSL_ALT_CERT_CHAINSAndre Heider2021-10-171-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | "Alternate certification chains, as oppossed to requiring full chain validataion. Certificate validation behavior is relaxed, similar to openssl and browsers. Only the peer certificate must validate to a trusted certificate. Without this, all certificates sent by a peer must be used in the trust chain or the connection will be rejected." This fixes e.g. uclient-fetch and curl connecting to servers using a Let's Encrypt certificate which are cross-signed by the now expired DST Root CA X3, see [0]. This is the recommended solution from upstream [1]. The binary size increases by ~12.3kb: 1236160 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f 1248704 staging_dir/target-mipsel_24kc_musl/usr/lib/libwolfssl.so.4.8.1.39c36f2f [0] https://github.com/openwrt/packages/issues/16674 [1] https://github.com/wolfSSL/wolfssl/issues/4443#issuecomment-934926793 Signed-off-by: Andre Heider <a.heider@gmail.com> [bump PKG_RELEASE] Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 28d8e6a8711ba78f1684a205e11b0dbd4ff2b2f3)
* mvebu: add support for iEi Puzzle-M901/Puzzle-M902Ian Chang2021-10-146-0/+868
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification ---------------------- * CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz * 4 GB DDR * 4 GB eMMC * mmcblk0 - mmcblk0p1 64M kernel_1 - mmcblk0p2 64M kernel_2 - mmcblk0p3 512M rootfs_1 - mmcblk0p4 512M rootfs_2 - mmcblk0p5 512M Reserved - mmcblk0p6 64M Reserved - mmcblk0p7 1.8G rootfs_data * 4 MB (SPI Flash) * 6 x 2.5 Gigabit ports (Puzzle-M901) - External PHY with 6 ports (AQR112R) * 6 x 2.5 Gigabit ports (Puzzle-M902) - External PHY with 6 ports (AQR112R) 3 x 10 Gigabit ports (Puzzle-M902) - External PHY with 3 ports (AQR113R) * 4 x Front panel LED * 1 x USB 3.0 * Reset button on Rear panel * UART (115200 8N1,header on PCB) Flash instructions: The original firmware is based on OpenWrt. Flash firmware using LuCI and CLI Signed-off-by: Ian Chang <ianchang@ieiworld.com> (cherry picked from commit 70c75965a97799b44871249c205bad48fea9a4ae) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: backport CN9130 dts necessary files changes to 5.4Ian Chang2021-10-1410-0/+2883
| | | | | | | | | | | 1. Add support for Marvell CN9130 SoC 2. Add support for CP115,and create an armada-cp11x.dtsi file which will be used to instantiate both CP110 and CP115 3. Add support for AP807/AP807-quad,AP807 is a major component of CN9130 SoC series 4. Drop PCIe I/O ranges from CP11x file and externalize PCIe macros from CP11x file Signed-off-by: Ian Chang <ianchang@ieiworld.com> (cherry picked from commit c98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: prereq detect Python 3.10 for `python3` binaryPaul Spooren2021-10-121-2/+2
| | | | | | | | | | | While the binary `python3.10` is correctly detected by the build system the default `python3` binary is currently not detected if pointing to a Python 3.10 installation. Fix this by extending the grep regex. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 56ea2bf2eec431ccd3c566190a444ad63db39b65)
* kernel: ar8216: add get_features methodDavid Bauer2021-10-121-23/+20
| | | | | | | | | | | | | | | Modifying PHY capabilities in the probe function broke with upstream commit 92ed2eb7f4b7 ("net: phy: probe the PHY before determining the supported features"). AR8316 switches only support 10/100 Mbit/s link modes because of this change. Provide a get_features method for the PHY driver, so Gigabit link mode will be advertised to link partners again. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 766e0f584a325b0b80a97bbc86ca515d97c63001)
* prereq-build: recognize Python 3.10Marcin Juszkiewicz2021-10-081-0/+2
| | | | | | | | | Fedora 35 contains Python 3.10 as default version. Make use of it. Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> [fix commit subject] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit e1c03ca18519f9683f6bfce1795e58d99575d895)
* build: fix `which` detection on Fedora & MacOSPaul Spooren2021-10-081-1/+3
| | | | | | | | | | | | | Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working because Fedora use alias and proc Fixup of fca5ad55d2 prereq-build: fix `which` detection on Fedora Reported-by: Jani Partanen <rtfm@iki.fi> Suggest-by: Etienne Champetier <champetier.etienne@gmail.com> Tested-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 0d1ebf0d6d20f0439ab45b293f9daa7662c44ba6)
* uhttpd: make organization (O=) of the cert configurable via uciMartin Schiller2021-10-062-3/+4
| | | | | | | | | Make the organization (O=) of the cert configurable via uci. If not configured, use a combination of "OpenWrt" and an unique id like it was done before. Signed-off-by: Martin Schiller <ms@dev.tdt.de> (cherry picked from commit 2c6c1501af664490ec9b701b46a201e21c670b96)
* uboot-lantiq: fix sha1.h header clash when system libmd installedAlan Swanson2021-10-021-0/+172
| | | | | | | | | Backport of u-boot commit "includes: move openssl headers to include/u-boot" https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167 Fixes: FS#3955 Signed-off-by: Alan Swanson <reiver@improbability.net> (cherry picked from commit 8db641049292035604f0e1fb788608fdea879eca)
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-0275-269/+175
| | | | | | | | | | | | | | | | | | Manually rebased: generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: generic/backport-5.4/040-ARM-8918-2-only-build-return_address-if-needed.patch layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: Work around Plasma Cloud PA1200 5GHz crashSven Eckelmann2021-09-251-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noticed [1] that the ath10k firmware crashes on 5GHz since OpenWrt 21.02.0. The problem seems to be triggered by the the nonLinearTxFir field in the 5GHz BDF. If baseEepHeader.nonLinearTxFir (offset 0xc2) is 1 then the firmware just crashes when setting up the 5Ghz radio using `ifconfig wlan1 up`: ath10k_ahb a800000.wifi: firmware crashed! (guid 9e36ee82-4d2c-4c63-b20b-609a1eaca30c) ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746 ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5f400efc ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1 ath10k_ahb a800000.wifi: firmware register dump: ath10k_ahb a800000.wifi: [00]: 0x0000000B 0x000015B3 0x009C3C27 0x00975B31 ath10k_ahb a800000.wifi: [04]: 0x009C3C27 0x00060530 0x00000018 0x004176B8 ath10k_ahb a800000.wifi: [08]: 0x00405A50 0x00412A30 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [12]: 0x00000009 0x00000000 0x009B9742 0x009B974F ath10k_ahb a800000.wifi: [16]: 0x00971238 0x009B9742 0x00000000 0x00000000 ath10k_ahb a800000.wifi: [20]: 0x409C3C27 0x004053DC 0x00000D2C 0x00405A60 ath10k_ahb a800000.wifi: [24]: 0x809C3E13 0x0040543C 0x00000000 0xC09C3C27 ath10k_ahb a800000.wifi: [28]: 0x809B9AC5 0x0040547C 0x00412A30 0x0040549C ath10k_ahb a800000.wifi: [32]: 0x809B8ECD 0x0040549C 0x00000001 0x00412A30 ath10k_ahb a800000.wifi: [36]: 0x809B8FF3 0x004054CC 0x00412838 0x00000014 ath10k_ahb a800000.wifi: [40]: 0x809BEF98 0x0040551C 0x0041627C 0x00000002 ath10k_ahb a800000.wifi: [44]: 0x80986D47 0x0040553C 0x0041627C 0x00416A88 ath10k_ahb a800000.wifi: [48]: 0x809CBB0A 0x0040559C 0x0041ACC0 0x00000000 ath10k_ahb a800000.wifi: [52]: 0x809864EE 0x0040560C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: [56]: 0x809CA8A4 0x0040564C 0x0041ACC0 0x00000001 ath10k_ahb a800000.wifi: Copy Engine register dump: ath10k_ahb a800000.wifi: [00]: 0x0004a000 14 14 3 3 ath10k_ahb a800000.wifi: [01]: 0x0004a400 16 16 22 23 ath10k_ahb a800000.wifi: [02]: 0x0004a800 3 3 2 3 ath10k_ahb a800000.wifi: [03]: 0x0004ac00 15 15 15 15 ath10k_ahb a800000.wifi: [04]: 0x0004b000 4 4 44 4 ath10k_ahb a800000.wifi: [05]: 0x0004b400 3 3 2 3 ath10k_ahb a800000.wifi: [06]: 0x0004b800 1 1 1 1 ath10k_ahb a800000.wifi: [07]: 0x0004bc00 1 1 1 1 ath10k_ahb a800000.wifi: [08]: 0x0004c000 0 0 127 0 ath10k_ahb a800000.wifi: [09]: 0x0004c400 0 0 0 0 ath10k_ahb a800000.wifi: [10]: 0x0004c800 0 0 0 0 ath10k_ahb a800000.wifi: [11]: 0x0004cc00 0 0 0 0 ath10k_ahb a800000.wifi: failed to update channel list: -108 ath10k_ahb a800000.wifi: failed to set pdev regdomain: -108 ath10k_ahb a800000.wifi: failed to create WMI vdev 0: -108 ieee80211 phy1: Hardware restart was requested Since no actual solution is known (besides downgrading the ath10k firmware) it seems to be better to disable the nonLinearTxFir for now. [1] https://lore.kernel.org/ath10k/3423718.UToCqzeSYe@ripper/ Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 8b090708208501a60e71d0118b9860dd401d7d8d)
* ipq-wifi: Update Plasma Cloud PA1200 BDFs to firmware 3.5.12Sven Eckelmann2021-09-251-0/+0
| | | | | | | | | The official Plasma Cloud firmware adjusted the BDFs to contain new conformance test limits and target power values. These should be imported to avoid emissions outside the allowed limits. Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit e0721608f9620b570c7f18d94681e86b01c0b9a0)
* hostapd: fix segfault when deinit mesh ifacesJesus Fernandez Manzano2021-09-241-0/+5
| | | | | | | | | | | | In hostapd_ubus_add_bss(), ubus objects are not registered for mesh interfaces. This provokes a segfault when accessing the ubus object in mesh deinit. This commit adds the same condition to hostapd_ubus_free_bss() for discarding those mesh interfaces. Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net> (cherry picked from commit 5269c47e8db549695ceaf6a19afdd0cb90074622)
* rockchip: fix broken squashfs sysupgradeDavid Bauer2021-09-241-1/+1
| | | | | | | | | | | | | | | The rockchip platform supports squashfs SD card images. However, the resulting image is not padded to completely fill the rootfs partition. Because of that, the f2fs overlay might not be erased, resulting in uci-defaults not bing executed or the configuration not being erased, even though drop config was selected. Modify the image generation process so the image is padded to cover the entire root filesystem partition. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit b56f7407d999d29c200c8c5880655926ef9874b7)
* apm821xx: MBL: band-aid MBL DUOChristian Lamparter2021-09-231-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Takimata reported on the OpenWrt forum in thread [0], that his MyBook Live Duo wasn't booting OpenWrt 21.02 after upgrading from the previous OpenWrt 19.07. The last logged entries on his console |[ 0.531599] sata1-regulator GPIO handle specifies active low - ignored |[ 0.538391] sata0-regulator GPIO handle specifies active low - ignored |[ 0.759791] ata2: SATA link down (SStatus 0 SControl 300) |[ 0.765251] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |[ 5.909555] ata1.00: qc timeout (cmd 0xec) |[ 5.913656] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) |[ 6.231757] ata1: SATA link down (SStatus 0 SControl 300) This extract clearly showed that the HDD on which OpenWrt is installed, simply disappeared after the SATA power regulators had been initialized. Since the device-tree regulators haven't changed since the OpenWrt 19.07 days this will require further investigation on the snapshot/master/trunk branch. For the time being, it was requested to just delete the nodes so, the device will boot again. Which unfortunately, will have to wait until 21.02.1 is released. He also confirmed that the My Book Live Single wasn't affected. It works with or without this change. [0] <https://forum.openwrt.org/t/21-02-0-and-snapshot-fail-to-boot-on-my-book-live-duo/106585> Reported-by: Takimata (forum.openwrt.org/u/takimata) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: Update to backports-5.10.68Hauke Mehrtens2021-09-2229-135/+84
| | | | | | | | | | | | | | | | | | Refresh all patches. The removed patches were integrated upstream. This contains fixes for CVE-2020-3702 1. These patches (ath, ath9k, mac80211) were included in kernel versions since 4.14.245 and 4.19.205. They fix security vulnerability CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2]. Thank you Josef Schlehofer for reporting this problem. [1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702 [2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: add support for minew g1-cAlexander Couzens2021-09-213-0/+152
| | | | | | | | | | | | | | | | | | | | | | The minew g1-c is a smart home gateway / BLE gateway. A Nordic nRF52832 is available via USB UART (cp210x) to support BLE. The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported). There is a small LED which is only visible when the device is open which will be used as LED until the ws2812b is supported. The board has also a micro sdcard/tfcard slot (untested). The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST). The vendor uses an older OpenWrt version, sysupgrade can be used via serial or ssh. CPU: MT7628AN / 580MHz RAM: DDR2 128 MiB RAM Flash: SPI NOR 16 MiB W25Q128 Ethernet: 1x 100 mbit (Port 0) (PoE in) USB: USB hub, 2x external, 1x internal to USB UART Power: via micro usb or PoE 802.11af UART: 3.3V, 115200 8n1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ipq40xx: Fix board-2.bin package name for Plasma Cloud PA2200Sven Eckelmann2021-09-191-1/+1
| | | | | | | | | | | | The board data file for the Plasma Cloud PA2200 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. A typo in the device package name resulted in a not correctly selected package for the device specific board-2.bin. The wifi driver has therefore loaded the wrong calibration information into the wifi chip. Fixes: 4871fd2616ac ("ipq40xx: add support for Plasma Cloud PA2200") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit c7e9335e4c23f3bd074cb2b215a289b8b75f319c)
* ipq40xx: Fix board-2.bin package name for Plasma Cloud PA1200Sven Eckelmann2021-09-191-1/+1
| | | | | | | | | | | | The board data file for the Plasma Cloud PA1200 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. A typo in the device package name resulted in a not correctly selected package for the device specific board-2.bin. The wifi driver has therefore loaded the wrong calibration information into the wifi chip. Fixes: ea5bb6bbfee0 ("ipq40xx: add support for Plasma Cloud PA1200") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit d0ffc175350f2be6174932dc0afd4d2737afe52d)
* ipq40xx: Select correct board-2.bin for EnGenius EMR3500Sven Eckelmann2021-09-191-0/+1
| | | | | | | | | | The board data file for the EnGenius EMR3500 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. As result, the wrong calibration information will be loaded into the wifi chip. Fixes: 3f61e5e1b97e ("ipq40xx: add support for EnGenius EMR3500") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 14bd392a1cd0b8e267e4402ae27b3c5a8f66b933)
* ipq40xx: Select correct board-2.bin for EnGenius EMD1Sven Eckelmann2021-09-191-0/+1
| | | | | | | | | | The board data file for the EnGenius EMD1 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. As result, the wrong calibration information will be loaded into the wifi chip. Fixes: 51f303597839 ("ipq40xx: add support for EnGenius EMD1") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit d9f4a4280e674ddb4ec75ae2d73b0f86e0c282cc)
* kernel: backport switchdev fix for bridge in bridge configurationsFabian Bläse2021-09-131-0/+60
| | | | | | | | | | | | | | | | | | | | This patch fixes the forwarding behavior of bridge in bridge configurations with DSA. Without it, the configuration of the upper bridge might overwrite settings of the lower bridge. For example, a vlan-aware bridge with DSA interfaces in it might be offloaded to the DSA hardware. If the bridge interface itself gets slave of a different bridge without vlan filtering, the vlan filtering setting of the lower bridge is overwritten by the upper bridge, which results in an incorrect hardware configuration. This was backported from kernel 5.7. Ref: https://lore.kernel.org/netdev/20191222192235.GK25745@shell.armlinux.org.uk/ Fixes: FS#3996 Signed-off-by: Fabian Bläse <fabian@blaese.de> (cherry picked from commit c50ece58c41647880cc74c927d98b465cdfbdad8)
* kernel: Add missing kernel config optionsHauke Mehrtens2021-09-134-5/+3
| | | | | | | | These options are selectable when some of the kernel debug options like KERNEL_SOFTLOCKUP_DETECTOR are selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1a3b3dc7974c98843baeb22251dc4c580dc771d6)
* build: Replace KERNEL_LOCKUP_DETECTOR with KERNEL_SOFTLOCKUP_DETECTORHauke Mehrtens2021-09-131-16/+4
| | | | | | | | | | | | | | The LOCKUP_DETECTOR configuration option split into the SOFTLOCKUP_DETECTOR and HARDLOCKUP_DETECTOR configuration option some time ago. The HARDLOCKUP_DETECTOR option is only working on some architectures, but SOFTLOCKUP_DETECTOR should work everywhere. Replace KERNEL_LOCKUP_DETECTOR with KERNEL_SOFTLOCKUP_DETECTOR. LOCKUP_DETECTOR will be selected by SOFTLOCKUP_DETECTOR automatically. Fixes: b951f53fbae3 ("build: Add additional kernel debug options") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d27f6e2c5d2a2315cc8fe684d117c80aa9984ca8)
* kirkwood: increase kernel partition of LinksysesPawel Dembicki2021-09-132-4/+6
| | | | | | | | | | | | | | | At this moment kernel partition in Linksyses EA3500/E4200/EA4500 is ended before start of rootfs partition. It was introduced in 9808b9ae02 and it broke easy revert to stock. Sysupgrade, when OFW is used, write whole stock image to kernel partition. Most likeley image will be bigger than small kernel partition and it make stock system invalid. This patch change size of kernel partitions and now it overlaps rootfs. Revert to stock will be possible again. Fixes: 9808b9ae02 ("kirkwood: switch to kernel 4.9") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mvebu: limit mvneta tx queue workaround to 32 bit SoCTomasz Maciej Nowak2021-09-091-2/+6
| | | | | | | | | | | | | This patch has been carried since introduction throughout every kernel major bump and no one has tested if the later kernels improved the situation. The Armada 3720 SoC can only process GbE interrupts on Core 0 and this is already limited in all stable kernels, so ditch this workaround for 64 bit SoCs. Ref: https://git.kernel.org/torvalds/c/cf9bf871280d Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit cbdd2b62e4d5e0572204c37d874d32dc8610840e)
* OpenWrt v21.02.0: revert to branch defaultsHauke Mehrtens2021-09-015-11/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0: adjust config defaultsv21.02.0Hauke Mehrtens2021-09-015-10/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for onion omegaJan-Niklas Burfeind2021-09-013-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Onion Omega is a hardware development platform with built-in WiFi. https://onioniot.github.io/wiki/ Specifications: - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor) - 64MB of DDR2 RAM running at 400 MHz - 16MB of on-board flash storage - Support for USB 2.0 - Support for Ethernet at 100 Mbps - 802.11b/g/n WiFi at 150 Mbps - 18 digital GPIOs - A single Serial UART - Support for SPI - Support for I2S Flash instructions: The device is running OpenWrt upon release using the ar71xx target. Both a sysupgrade and uploading the factory image using u-boots web-UI do work fine. Depending on the ssh client, it might be necessary to enable outdated KeyExchange methods e.g. in the clients ssh-config: Host 192.168.1.1 KexAlgorithms +diffie-hellman-group1-sha1 The stock credentials are: root onioneer For u-boots web-UI manually configure `192.168.1.2/24` on your computer, connect to `192.168.1.1`. MAC addresses as verified by OEM firmware: 2G phy0 label LAN eth0 label - 1 LAN is only available in combination with an optional expansion dock. Based on vendor acked commit: commit 5cd49bb067ca ("ar71xx: add support for Onion Omega") Partly reverts: commit fc553c7e4c8e ("ath79: drop unused/incomplete dts") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit d98738b5c118fc45068b45f07b8b6938e91f35d2)
* kernel: bump 5.4 to 5.4.143Hauke Mehrtens2021-08-2917-64/+25
| | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* openssl: bump to 1.1.1lEneas U de Queiroz2021-08-282-5/+4
| | | | | | | | | | | | This version fixes two vulnerabilities: - SM2 Decryption Buffer Overflow (CVE-2021-3711) Severity: High - Read buffer overruns processing ASN.1 strings (CVE-2021-3712) Severity: Medium Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 7119fd32d397567931e63dbbf72014e95624018f)
* prereq-build: require python3-distutilsAndre Heider2021-08-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Debian and Ubuntu ship a python3-minimal package which does not include the distutils module. This is not supported by upstream and can be considered a broken python distribution. In practice, many scripts depend on said module, and this is a reoccuring pain point for building various OpenWrt packages. Require and check for said module, enough time has been wasted on this. A list of just the most recent issues: https://github.com/openwrt/packages/pull/16304 https://github.com/openwrt/packages/pull/16027 https://github.com/openwrt/packages/pull/15443 https://github.com/openwrt/packages/pull/14394 https://github.com/openwrt/packages/pull/12909 https://github.com/openwrt/packages/issues/12443 https://github.com/openwrt/packages/pull/11035 https://github.com/openwrt/packages/issues/10993 Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 60af8d753343691c4a647bfc7c51ef6eb92df9f2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 23:06:15 +0000