aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: add ucidef_set_led_usbport for full usbport supportRafał Miłecki2016-10-223-0/+34
| | | | | | | | | | | | | | | | | | | | This helper allows using usbport trigger directly. It requires usbport compatible syntax and supports specifying multiple USB ports, e.g.: ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1" This adds a proper object to the board.json, e.g. "usb": { "name": "USB", "type": "usbport", "sysfs": "devicename:colour:function", "ports": [ "usb1-port1", "usb2-port1" ] } and supports translating it into uci section. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update kernel 4.4 to version 4.4.26Koen Vandeputte2016-10-211-2/+2
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on cns3xxx & imx6. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* busybox: adjust download mirrorHannu Nyman2016-10-211-2/+2
| | | | | | | | | | * Adjust download locations: - use https as busybox.net permanently redirects http to https - gentoo mirror has neither 1.25.0 nor 1.25.1 available, so drop it in favor of buildroot.net that has 1.25.1 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sdk: predefine SOURCE_DATE_EPOCHJo-Philipp Wich2016-10-213-1/+4
| | | | | | | | | When building packages within the SDK, there is no Git revision history available so prepopulate SOURCE_DATE_EPOCH in version.mk, similar to how we handle REVISION already. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm53xx: include b43 in Tenda AC9 imageRafał Miłecki2016-10-201-1/+1
| | | | | | There is some (poor?) support for BCM43217 in b43. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* libreadline: set ABI_VERSION to force rebuild of dependent packagesFelix Fietkau2016-10-191-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable cpu temp driver for all vr9 boardsMathias Kresin2016-10-196-20/+4
| | | | | | | Only present on v1.2 vr9 SoCs but the driver takes care to not load on boards having a v1.1 SoC. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix thermal sensors driverMathias Kresin2016-10-191-5/+21
| | | | | | | | | | | | | | | | | | | | Read the temperature including the decimale place from the CGU_GPHY1_CR register. Decrement the temperature read from the register by 38.0 degree celsius. The temperature range of the sensor is -38.0 to +154 °C and the register value 0 is equal to -38.0 °C. This fixes the report of unrealistic temperatures as seen on all tested boards. Give the SoC a few milliseconds to get the first temperature value. On some rare occasions there is no temperature value in the register when read the first time after activation. This leads to a reported temperature of -38.0 °C on boot. Only version 1.2 of the vr9 SoC has a temperature sensor. Add a check to make sure the driver doesn't load on v1.1 vr9 SoCs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: Sanitize device tree filesAndreas Eberlein2016-10-1956-656/+668
| | | | | | | | | | The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes. This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de> [sanitize all device tree files] Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: Fix buttons for ARV752DPWAndreas Eberlein2016-10-191-5/+5
| | | | | | | | The GPIO for reset switch is wrong in definition. Further the key codes for the two additional buttons are ineffective. Both is fixed here. Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
* lantiq: use new build code for DGN3500Mathias Kresin2016-10-191-99/+36
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop lzma-loaderMathias Kresin2016-10-1924-2792/+0
| | | | | | It isn't used any more. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: rework VG3503J imageMathias Kresin2016-10-193-79/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new image build code and remove the lzma loader. The lzma loader was used to cheat the signature validation of the bootloader and I found another way to do this. To migrate boards already using LEDE/OpenWrt to the new image the following steps need to be done once: VR9 # run reset_uboot_config VR9 # reset VR9 # setenv ethaddr AA:BB:CC:DD:EE:FF VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000 VR9 # saveenv VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin VR9 # erase 0xb0020000 $(filesize) VR9 # cp.b 0x81000000 0xb0020000 $(filesize) The mac address is printed on the label at the bottom of the case. The following steps are need to be done during first install: VR9 # setenv preboot ping 1.1.1.1\;bootm 0xb001f000 VR9 # saveenv VR9 # tftp 0x81000000 lede-lantiq-xrx200-VG3503J-squashfs-sysupgrade.bin VR9 # erase 0xb0020000 $(filesize) VR9 # cp.b 0x81000000 0xb0020000 $(filesize) The image uses the uImage firmware splitter now instead of hardcoded kernel and rootfs partitions. The firmware partition size was extended to use flash space that was reserved for partitions required only by the ECI firmware. Due to the changes an upgrade to a later LEDE revision from a running LEDE is supported now. A default switch config was added and the device uses the same MAC addresses as the ECI firmware now instead of the same for all VG3503J. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: update to the latest version, fixes a few minor service handling issuesFelix Fietkau2016-10-191-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: include usbport trigger for devices with USBRafał Miłecki2016-10-191-0/+1
| | | | | | | We don't have any code for enabling it automatically yet but it allows adding entries manually to the /etc/config/system. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-1910-488/+5
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* switch to the new usbport LED triggerRafał Miłecki2016-10-1928-139/+150
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Latest ath10k CT 988X firmware (beta-18).Ben Greear2016-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | * Backport much of the 10.2 firmware features from upstream QCA driver. This includes ANI support, adaptive CCA, tx-hang workarounds, and lots of other things. Not all of this may be enabled at this point, and more code waits to be backported as time and motivation allows. * Fix some rate-control issues where ath10k in station mode (at least), would sometimes get stuck at low rates. This appeared to be a probe related state machine issue in the firmware, so I added some timeout logic to kick the state machine if it gets stuck. This signicantly improves throughput tests with many stations. * Support configuring WMI WD timeout using SET_SPECIAL API. * Properly configure the rx-mask on bootup to work around problem found by Mr. Kazior. This should remove the need to add the driver hack he posted. * Allow configuring pdev failed-retry threshold. This is how many consecutive tx failures the firmware will allow before resetting the wifi chip (not a full firmware crash). Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest 4.7 CT ath10k driver.Ben Greear2016-10-191-2/+2
| | | | | | | | Adds Sebastian's 160Mhz support (un-tested), remove DMA32 change that broke some x86 systems, allow setting 10.1 CT firmware keepalive watchdog timeout, support QCA 9887 hardware, and some other tweaks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* kernel: add package for usbport LED triggerRafał Miłecki2016-10-181-0/+19
| | | | | | | | | | This is upstream alternative for LEDE's ledtrig-usbdev. It's main advantages are: 1) Support for assigning more than 1 USB port to the LED 2) Setting proper state when activating with device already connected 3) FWIW it's an upstream driver Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: add back end-of-UBI marker for a few factory images (FS#228)Felix Fietkau2016-10-181-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Add support to TP-Link EAP120Henryk Heisig2016-10-1811-1/+269
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* procd: Allow initscripts to start one daemon instance at a timePierre Lebleu2016-10-182-2/+4
| | | | Signed-off-by: Pierre Lebleu <pierre.lebleu@technicolor.com>
* xfsprogs: install path consistent with fs toolsAlberto Bursi2016-10-181-7/+7
| | | | | | | changed install path from /sbin to /usr/sbin to be consistent with other filesystem tools ext2-3-4 and f2fs tools are in /usr/sbin, for example Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* kernel: update kernel 4.4 to version 4.4.25Koen Vandeputte2016-10-161-2/+2
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on cns3xxx & imx6. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport some upstream a-msdu tx fixesFelix Fietkau2016-10-172-0/+128
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iperf: used an updated renamed tarball instead of main upstream URLFelix Fietkau2016-10-171-3/+8
| | | | | | | | | | iperf upstream added some bugfixes to the already released 2.0.9 version without changing the filename. This conflicts with old mirrored files and the hash that we previously used. To avoid conflict, use a renamed tarball from mirror2.openwrt.org containing the new upstream changes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix build error in ath10k with hwmon enabledFelix Fietkau2016-10-171-0/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: add upstream patch to fix send_to_fromStijn Tintel2016-10-152-1/+38
| | | | | | | This fixes ntpd when queries are sent to secondary IPv4 IP addresses. See https://bugs.busybox.net/show_bug.cgi?id=9146 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* busybox: update to version 1.25.1Stijn Tintel2016-10-155-80/+5
| | | | | | | | | Dropped upstream patches: 000-busybox-1.25.0-gzip.patch 000-busybox-1.25.0-ip.patch 000-busybox-1.25.0-ntpd.patch Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar71xx: set EU region code for TP-Link TL-WA901ND v4Matthias Schiffer2016-10-151-0/+1
| | | | | | | | | | | | | There is no US firmware for the TL-WA901ND v4 yet, so we'll just unconditionally set the EU region for now. This makes LEDE flashable on these devices again. The format of the region string is slightly different from the one used on the Archer C7 that is generated by mktplinkfw (the second half of the region string is missing), but it's similar enough to make it work. Tested-by: Jannis Pinter <jannis@pinterjann.is> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: update sha256sumHauke Mehrtens2016-10-151-1/+1
| | | | | | | | Commit f5c741b5e02 updated procd to a more recent version, but did not change the hash of the tar. Update it to the one matching the file on the download servers. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-adsl-mei: fix build errorMathias Kresin2016-10-151-13/+0
| | | | | | | | | The file to patch doesn't exists. Due to the fact that a src directory exists, the patch was never applied. With 28502a9 the behaviour was changed and revealed the issue. Signed-off-by: Mathias Kresin <dev@kresin.me>
* procd: update to latest git HEAD revisionJohn Crispin2016-10-151-2/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* scripts/freebsd.sh: Remove scriptDaniel Engberg2016-10-151-1/+0
| | | | | | This is outdated and bad practice, general dependencies should be documented and leave the rest up to the user. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* boot/rbcfg: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/wrt55agv2-spidevs: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/w1-gpio-custom: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/trelay: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/spi-gpio-custom: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/rtc-rv5c386a: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/rotary-gpio-custom: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/lantiq/ltq-*: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-155-25/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/i2c-gpio-custom: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/gpio-button-hotplug: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/button-hotplug: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel/avila-wdt: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* network/utils/maccalc: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* network/utils/rssileds: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* network/utils/resolveip: drop Build/Prepare rule in favor of default oneAlexandru Ardelean2016-10-151-5/+0
| | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 02:30:31 +0000