aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add missing MTD_NAND_RB91X symbolKoen Vandeputte2021-07-091-0/+1
| | | | | | | | Looks like the symbol was forgotten for 5.4 Fixes: 820e660cd7 ("ath79: add NAND driver for MikroTik RB91xG series") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 52c27dab1973d523453fc1e319d8636e1cb10927)
* ath79: add missing GPIO_LATCH symbolDavid Bauer2021-07-091-0/+1
| | | | | | | Fixes commit 7b8931678c36 ("ath79: add gpio-latch driver for MikroTik RouterBOARDs") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f2f137593eb6c0e849352e85c003c91f8be81dd1)
* ath79: mikrotik: fix beeper phantom noise on RB912Koen Vandeputte2021-07-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Analysis done by Denis Kalashnikov: It seems that some ROS versions on some routerboard models have this bug: after silence boot (no output to uart, no beeps) beeper clicks when wireless traffic is. https://forum.mikrotik.com/viewtopic.php?f=3&t=92269 https://forum.mikrotik.com/viewtopic.php?t=63399 From these links: 1) Hello, I have RB951G-2HnD and I noticed strange thing when I loaded the device with some wireless traffic it produced strange sound - like hissing, fizzing etc. 2) Same problem still on 6.33, with silent boot enabled I hear buzzing noise on wireless load. 3) The sound is fixed in v5.19, it was a bug that caused beeper to make clicks. It also got fixed in RouterOS: * What's new in 5.19 (2012-Jul-16 10:51): fix ticking sound on RB411UAHL; * What's new in 6.38.3 (2017-Feb-07 09:52): rb3011 - fixed noise from buzzer after silent boot; I've checked with an oscilloscope that: * When on the ssr beeper pin is 0, on the beeper itself is 1 (~5V), and when on the ssr beeper pin is 1, on the beeper is 0 The beeper doesn't consume power, so 1 should be a default/idle value for the ssr beeper pin). * When there is wireless traffic (ping packets) in the background and the beeper clicks, I see pulses on the beeper itself, but no pulses on the ssr beeper pin (Q5 pin of 74hc595). When I manually toggle the ssr beeper pin I see pulses on both. So, it is likely that the phantom beeper clicks are caused by the EMI. Suggested-by: Denis Kalashnikov <denis281089@gmail.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit a58bcc9e673db3c6aa39f2089d216d51c8356418)
* ath79: ar934x: fix mounting issues if subpage is not supportedKoen Vandeputte2021-07-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the option to disable subpage writing is only set when a HW ECC engine is used. Some boards lack a HW ECC engine and use software for that. In this case, this NAND option does not get set when the NAND chip does not support it, resulting in mounting errors. Move the setting of this option to a generic init location so it gets set for all types where required. While at it, also OR the option instead of just setting it so we don't overwrite potential flags being set somewhere else. Before: [ 1.681273] UBI: auto-attach mtd2 [ 1.684669] ubi0: attaching mtd2 [ 1.688877] ubi0 error: validate_ec_hdr: bad VID header offset 2048, expected 512 [ 1.696469] ubi0 error: validate_ec_hdr: bad EC header [ 1.701712] Erase counter header dump: [ 1.705512] magic 0x55424923 [ 1.709322] version 1 [ 1.712330] ec 1 [ 1.715331] vid_hdr_offset 2048 [ 1.718610] data_offset 4096 [ 1.721880] image_seq 1462320675 [ 1.725680] hdr_crc 0x12255a15 After: 1.680917] UBI: auto-attach mtd2 [ 1.684308] ubi0: attaching mtd2 [ 2.954504] random: crng init done [ 3.142813] ubi0: scanning is finished [ 3.163455] ubi0: attached mtd2 (name "ubi", size 124 MiB) [ 3.169069] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 3.176037] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.182942] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.190013] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0 [ 3.196102] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 3.203434] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1462320675 [ 3.212700] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20 [ 3.222124] ubi0: background thread "ubi_bgt0d" started, PID 317 [ 3.230246] block ubiblock0_1: created from ubi0:1(rootfs) [ 3.235819] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 3.256830] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry-picked from commit 6561ca1fa510003a19ea7f8800535f12e5098ce2)
* ath79: add support for MikroTik RouterBOARD 912UAG-2HPnDDenis Kalashnikov2021-07-095-0/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been supported in the ar71xx. Links: * https://mikrotik.com/product/RB912UAG-2HPnD * https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb912uag-2hpnd This also supports the 5GHz flavour of the board. Hardware: * SoC: Atheros AR9342, * RAM: DDR 64MB, * SPI NOR: 64KB, * NAND: 128MB, * Ethernet: x1 10/100/1000 port with passive POE in, * Wi-Fi: 802.11 b/g/n, * PCIe, * USB: 2.0 EHCI controller, connected to mPCIe slot and a Type-A port -- both can be used for LTE modem, but only one can be used at any time. * LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED, Ethernet phy LED, * Button, * Beeper. Not working: * Button: it shares gpio line 15 with NAND ALE and NAND IO7, and current drivers doesn't easily support this configuration, * Beeper: it is connected to bit 5 of a serial shift register (tested with sysfs led trigger timer). But kmod-gpio-beeper doesn't work -- we left this as is for now. Flashing: * Use the RouterBOARD Reset button to enable TFTP netboot, boot kernel and initramfs and then perform sysupgrade. * From ar71xx OpenWrt firmware run: $ sysupgrade -F /tmp/<sysupgrade.bin> For more info see: https://openwrt.org/toh/mikrotik/common. Co-Developed-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 695a1cd53ca52c678b3f837deb1bf30204285360)
* ath79: add NAND driver for MikroTik RB91xG seriesDenis Kalashnikov2021-07-093-0/+397
| | | | | | | | | | | | | | Main part is copied from ar71xx original driver rb91x_nand written by Gabor Juhos <juhosg@openwrt.org>. What is done: * Support of kernel 5.4 and 5.10, * DTS support, * New gpio API (gpiod_*) support. Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 820e660cd7463aa6d5ed9d31baf0f3c35596ce57)
* ath79: add gpio-latch driver for MikroTik RouterBOARDsDenis Kalashnikov2021-07-092-0/+226
| | | | | | | | | | | | | This is a slighty modified version of ar71xx gpio-latch driver written by Gabor Juhos <juhosg@openwrt.org>. Changes: * DTS support, * New gpio API (gpiod_*). Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 7b8931678c36c8d8c333b446258a653b1358bf70)
* hostapd: make wnm_sleep_mode_no_keys configurableTimo Sigurdsson2021-07-052-4/+8
| | | | | | | | | | | | | | | In the aftermath of the KRACK attacks, hostapd gained an AP-side workaround against WNM-Sleep Mode GTK/IGTK reinstallation attacks. WNM Sleep Mode is not enabled by default on OpenWrt, but it is configurable through the option wnm_sleep_mode. Thus, make the AP-side workaround configurable as well by exposing the option wnm_sleep_mode_no_keys. If you use the option wpa_disable_eapol_key_retries and have wnm_sleep_mode enabled, you might consider using this workaround. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [bump PKG_RELEASE] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit bf98faaac8ed24cf7d3d93dd4fcd7304d109363b)
* hostapd: make country3 option configurableTimo Sigurdsson2021-07-052-3/+4
| | | | | | | | | | | | | The country3 option in hostapd.conf allows the third octet of the country string to be set. It can be used e.g. to indicate indoor or outdoor use (see hostapd.conf for further details). Make this option configurable but optional in OpenWrt. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [bump PKG_RELEASE, rebase] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 9f09c1936a4a13b67fcba632f7ca02331f685359) Signed-off-by: Paul Spooren <mail@aparcar.org>
* ltq-deu: Mark lantiq DEU brokenHauke Mehrtens2021-07-023-11/+6
| | | | | | | | | | | | | | | | | | | | | When the ltq_deu_vr9 kernel module is loaded, hostapd does not start any more. It fails with this error message: daemon.err hostapd: nl80211: kernel reports: key addition failed daemon.err hostapd: Interface initialization failed OpenWrt uses the standard Linux crypto API in the wifi drivers now and this probably makes the system offload more crypto operations to special hardware like the Lantiq DEU. There is probably a bug in the DEU and these operations fail and then hostapd does not start the interface. Do not include the Lantiq DEU by default any more. Fixes: FS#3901 Fixes: 53b6783907f3 ("mac80211: remove patches stripping down crypto support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Notupus <notpp46@gmail.com> (cherry-picked from commit 964863bb23999a1fae99b883053cc4f3c5c42b40)
* iwinfo: build with nl80211 backend only and make sharedJo-Philipp Wich2021-07-021-19/+5
| | | | | | | | | | | | Drop support for building the obsolete broadcom-wl backend and always forcibly enable the nl82011 support. This allows us to make the package shared again since no target specific compilation is happening anymore. This will solve various repository coherency issues related to unavailable libiwinfo versions in the long run. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 5a1065758b88b568a04a50189400321601904bdf)
* treewide: unmark selected packages nonsharedPetr Štetiar2021-07-026-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts changes done in commit 72cc44958ef4 ("treewide: mark selected packages nonshared") as it removes the nonshared flag, but keeps the PKG_RELEASE as the PKG_RELEASE bump while adding nonshared flag was incorrect. Unmark uci, ubus, libubox, lua, libnl-tiny and libjson-c as nonshared packages as this fix attempt didn't worked out. Currently the imagebuilder is broken again: openwrt-imagebuilder-21.02.0-rc3-ipq40xx-generic.Linux-x86_64$ make image PROFILE=avm_fritzbox-7530 PACKAGES=luci-ssl-openssl ... Collected errors: * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for luci-mod-status * pkg_hash_fetch_best_installation_candidate: Packages for luci-mod-status found, but incompatible with the architectures configured * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for rpcd-mod-iwinfo * pkg_hash_fetch_best_installation_candidate: Packages for rpcd-mod-iwinfo found, but incompatible with the architectures configured * satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-ssl-openssl: * libiwinfo20210430 * opkg_install_cmd: Cannot install package luci-ssl-openssl. Everything because iwinfo's ABI was changed two times since rc3 release: +IWINFO_ABI_VERSION:=20210430 +IWINFO_ABI_VERSION:=20210420 Since iwinfo is marked as nonshared, it wasn't built by phase2 builders, but luci-mod-status was already updated 2 times since rc3 and was thus rebuilt by phase2 builders: d1d452ed2fb3 luci-mod-status: don't set '-' hostname when creating static lease 95b3633055c1 luci-mod-status: switch to html table for wlan channel analysis So now luci-mod-status depends on libiwinfo20210430 but only libiwinfo20210106 can be downloaded. This is first part of the fix, in the upcoming commit Jo is going to remove nonshared flag from iwinfo package as well. References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035736.html References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035741.html Acked-by: Jo-Philipp Wich <jo@mein.io> Reported-by: Nick Hainke <vincent@systemli.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8307da3dbdaff13d5ce99f8aefa32f5b7a2e18e6)
* ath10k-ct: fix typo in MakefileMichael Yartys2021-07-021-1/+1
| | | | | | | Add forgotten colon to Makefile. Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit f0f1d68d528402b4d51a1dd08d2e2c9034167f92)
* ath10k-ct: update to latest versionMichael Yartys2021-07-024-45/+8
| | | | | | | | | | | | | | | | | Changelog: - ath10k-ct: Add security fixes. - ath10k-ct: Add 5.12 kernel version. - ath10k-ct: Fix the beacon/mcast/bcast override issue - ath10k-ct 5.7: Fix setting mcast/bcast/beacon rate from debugfs. - ath10k-ct: Add 5.11 driver. Delete upstreamed patch and refresh the rest. Also, use the opportunity to set PKG_RELEASE to $(AUTORELEASE). Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit 2e10ed925e1e07c28570731a429efa5e7de3b826)
* kernel/modules: move act_gact into kmod-sched-coreDENG Qingfang2021-07-021-2/+2
| | | | | | | | As the name suggests, act_gact has the generic actions such as dropping and accepting packets, so move it into kmod-sched-core. Signed-off-by: DENG Qingfang <dqfext@gmail.com> (cherry-picked from commit 10aacb9a6ce3445cdee39573f4120e7888beb022)
* package/comgt: Handle bind/unbind eventsArjun AK2021-07-021-0/+2
| | | | | | | | | | | | | | This script was expecting only add/remove events which has not been the case since Kernel 4.12 (which added bind/unbind). Bind events were getting treated as remove events which would cause hotplugged 3g modems to not work. More info: https://lkml.org/lkml/2018/12/23/128 https://github.com/systemd/systemd/issues/8221 Signed-off-by: Arjun AK <arjunak234@gmail.com> (cherry picked from commit 89ef883b92b3a87d9ab1bd289de26b9e72681dac)
* ubus: update to the latest versionFelix Fietkau2021-06-301-3/+3
| | | | | | 4fc532c8a55b ubusd: fix tx_queue linked list usage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: wifi: tidy up the reconf codeBob Cantor2021-06-301-1/+2
| | | | | | | | | | | | | commit 5edbd390d321532d9a697d6895a1a7c71c40bd5d rearranged the "wifi up" code. This commit tidies up the "wifi reconf" code so as to keep it aligned with the "wifi up" code. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit e8b54296092118fbef75de796d57799cc6c7b927)
* base-files: wifi: swap the order of some ubus callsBob Cantor2021-06-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | "/sbin/wifi up" makes three ubus calls: 1. ubus call network reload 2. ubus call network.wireless down 3. ubus call network.wireless up The first and third ubus calls call drv_mac80211_setup, while the second ubus call triggers wireless_device_setup_cancel, so the call sequence becomes, 1. drv_mac80211_setup 2. wireless_device_setup_cancel 3. drv_mac80211_setup This commit swaps the order of the first two ubus calls, 1. ubus call network.wireless down 2. ubus call network reload 3. ubus call network.wireless up Consequently drv_mac80211_setup is only called once, and two related bugs (#FS3784 and #FS3902) are no longer triggered by /sbin/wifi. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit b82cc8071366b8e96904a1b52af503442069b20d)
* mac80211: print an error if wifi teardown failsBob Cantor2021-06-301-0/+4
| | | | | | | | | | drv_mac80211_teardown fails silently if the device to be torn down is not defined. This commit prints an error message. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit 3933e29d1b87c713167cf4730b68e5f18af4f140)
* mac80211: always call wireless_set_data (FS#3784)Bob Cantor2021-06-301-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When wifi is turned off, drv_mac80211_teardown sometimes fails (silently) because the device to be torn down is not defined. This situation arises if drv_mac80211_setup was called twice when wifi was turned on. This commit ensures that the device to be torn down is always defined in drv_mac80211_teardown. Steps to reproduce: 1) Use /sbin/wifi to turn on wifi. uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi 2) Use /sbin/wifi to turn off wifi. uci set wireless.@wifi-device[0].disabled=1 uci commit wifi 3) Observe that wifi is still up. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit d515f6b6cde357bf480d32a7387f07ea40e85e52)
* mac80211: fix no_reload logic (FS#3902)Bob Cantor2021-06-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If drv_mac80211_setup is called twice with the same wifi configuration, then the second call returns early with error HOSTAPD_START_FAILED. (wifi works nevertheless, despite the fact that setup is incomplete. But "ubus call network.wireless status" erroneously reports that radio0 is down.) The relevant part of drv_mac80211_setup is, if [ "$no_reload" != "0" ]; then add_ap=1 ubus wait_for hostapd local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")" ret="$?" [ "$ret" != 0 -o -z "$hostapd_res" ] && { wireless_setup_failed HOSTAPD_START_FAILED return } wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1 fi This commit sets no_reload = 0 during the second call of drv_mac80211_setup. It is perhaps worth providing a way to reproduce the situation where drv_mac80211_setup is called twice. When /sbin/wifi is used to turn on wifi, uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi /sbin/wifi makes the following ubus calls, ubus call network reload ubus call network.wireless down ubus call network.wireless up The first and third ubus calls both call drv_mac80211_setup, while the second ubus call triggers wireless_device_setup_cancel. So the call sequence becomes, drv_mac80211_setup wireless_device_setup_cancel drv_mac80211_setup In contrast, when LuCI is used to turn on wifi only a single call is made to drv_mac80211_setup. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit a29ab3b79affb62fda82e0825ed811eaf482dd3c)
* mac80211: backport fix for nl80211 control port tx (fixes FS#3857)Felix Fietkau2021-06-307-17/+133
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit de499573006ab4f32ded9fd66a62ec5e0c183e8a)
* mac80211: add support for 802.3 encap offload with software rate controlFelix Fietkau2021-06-301-0/+119
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f2c6d892cacb5d884bdd638bc7574c1ee98514a5)
* mac80211: improve rate control performanceFelix Fietkau2021-06-304-1/+353
| | | | | | | | | | | | Call rate control handler after intermediate queueuing Includes follow-up fixes Signed-off-by: Felix Fietkau <nbd@nbd.name> cherry-picked from commits: - 7dd8829ef915f1c5fc728be8f8360c61ddaadf1b - a603e82dd342680d584c4eb5f1b222e056379890 - 8bb4437c01ca35a5ac67e391630a1b24cb52dbb7
* busybox: sysntpd: add trigger to reload serverAlexey Dobrovolsky2021-06-301-2/+22
| | | | | | | | | | | | | sysntpd server becomes unavailable if the index of the bound interface changes. So let's add an interface trigger to reload sysntpd. This patch also adds the ability for the sysntpd script to handle uci interface name from configuration. Fixes: 4da60500ebd2 ("busybox: sysntpd: option to bind server to iface") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> (cherry picked from commit 88114f617ae7bffe13d19d7b9575659a3d3cd9b6)
* busybox: sysntpd: option to bind server to ifaceAlexey Dobrovolsky2021-06-271-2/+10
| | | | | | | | | | | | NTPD in busybox has option -I to bind server to IFACE. However, capabilities of the busybox are limited, the -I option cannot be repeated and only one interface can be effectively specified in it. This option is currently not configurable via UCI. The patch adds an interface option to the system config, ntp section. Also sort options for uci_load_validate alphabetically. Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> (cherry picked from commit e12fcf0fe5597467f7cc21144e5f4da60500ebd2)
* iwinfo: update to latest Git HEADDavid Bauer2021-06-271-4/+4
| | | | | | | c45f0b5 iwinfo: add 802.11ax HE rate information Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 5515c29029ce7c63b48d1af0cbb3fbdc14ca033b)
* iwinfo: update to latest Git HEADDavid Bauer2021-06-271-4/+4
| | | | | | | | | 50b64a6 iwinfo: add basic IEEE 802.11ax support 70d2136 iwinfo: nl80211: perform split wiphy dump cd23727 iwinfo: cli: fix hwmode formatting Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 6f77ce77248d6458414efafd64c72d653fc70bb8)
* kernel: bump 5.4 to 5.4.128Hauke Mehrtens2021-06-2733-117/+79
| | | | | | | | | | | | | | | Manually rebased bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch Replaced with patch from Raspberry Pi kernel 5.10 patches mvebu/patches-5.4/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch Applied upstream All others updated automatically. Compile-tested on: ath79/generic, lantiq/xrx200, brcm27xx Runtime-tested on: ath79/generic, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libusb: Fix parsing of descriptors for multi-configuration devicesGeorgi Valkov2021-06-263-1/+91
| | | | | | | | | | | | | | | | Prerequisite patch: Correct a typo in the Changelog and clean up a stray file Fix changes in libusb which introduced a regression: Commit e2be556bd2 ("linux_usbfs: Parse config descriptors during device initialization") introduced a regression for devices with multiple configurations. The logic that verifies the reported length of the configuration descriptors failed to count the length of the configuration descriptor itself and would truncate the actual length by 9 bytes, leading to a parsing error for subsequent descriptors. Signed-off-by: Georgi Valkov <gvalkov@abv.bg> (cherry picked from commit 4b37e3bc2b2a079c996b6d97b8d3dbbd4ba6eb62)
* base-files: fix /tmp/TZ when zoneinfo not installedPaul Spooren2021-06-251-7/+4
| | | | | | | | | | | | | The zoneinfo packages are not installed per default so neither /tmp/localtime nor /tmp/TZ is generated. This patch mostly reverts the previous fix and instead incooperates a solution suggested by Jo. Fixes "base-files: fix zoneinfo support " 8af62ed Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 56bdb6bb9781f8a0bbec5fc3075b9d2b8d12f9a8)
* base-files: fix zoneinfo supportRosen Penev2021-06-231-7/+9
| | | | | | | | | | | | | | | | | The system init script currently sets /tmp/localinfo when zoneinfo is populated. However, zoneinfo has spaces in it whereas the actual files have _ instead of spaces. This made the if condition never return true. Example failure when removing the if condition: /tmp/localtime -> /usr/share/zoneinfo/America/Los Angeles This file does not exist. America/Los_Angeles does. Ran through shfmt -w -ci -bn -sr -s Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit 8af62ede189aa504135db05474d34c9f8a1ed35d)
* exfat: update to 5.12.3Rosen Penev2021-06-221-3/+3
| | | | | | | | | | | | | Major changes are: Avoid page allocation failure from upcase table allocation. Add support for FITRIM. Improve write perofmrance on dirsync mount. Improve lookup perofmrance. Fix a bug on discard mount. Switch to AUTORELEASE to avoid having to bump it. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* realtek: Fix failsafe modeHauke Mehrtens2021-06-222-0/+19
| | | | | | | | | | | | | | | | The RTL8380-RTL9300 switches only forward packets when VLAN ID 1 is configured. Do not use the standard failsafe configuration for DSA accessing the default port directly, but configure a switch on the lan1 interface instead. This will add the VLAN ID 1 configuration to the switch: $ bridge vlan show port vlan-id lan1 1 PVID Egress Untagged switch 1 PVID Egress Untagged Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b7ee0786b56d1088c195fe7c1cdb1ad7d20c9245)
* base-files: failsafe: Remove the VLAN modifier from interface nameHauke Mehrtens2021-06-221-0/+2
| | | | | | | | Some interfaces have a VLAN modifier like :t in lan1:t, this modifier should be removed from the interface before calling preinit_ip_config(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 790561d5109ef81537fdb8ceb8eb183c0cab077c)
* base-files: failsafe: Fix IP configurationHauke Mehrtens2021-06-221-3/+9
| | | | | | | | | | | | | | Adapt the preinit_config_board() to the board.json network changes. It now looks for the device and the ports variables to configure the LAN network. This works with swconfig configurations. Fixes: FS#3866 Fixes: d42640e389a8 ("base-files: use "ports" array in board.json network for bridges") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 467cd378db3359814866ec4121fdb4417783241e)
* kernel: Backport patch to automatically bring up DSA master when opening ↵Hauke Mehrtens2021-06-2210-18/+103
| | | | | | | | | | | | | user port Without this patch we have to manually bring up the CPU interface in failsafe mode. This was backported from kernel 5.12. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 2e17c710954bd3506467d700dee23757b138fedd)
* kernel-5.4: backport latest patches for wireguardJason A. Donenfeld2021-06-2212-0/+1514
| | | | | | | | | | | These are the latest patches that just landed upstream for 5.13, will be backported by Greg into 5.10 (because of stable@), and are now in the 5.4 backport branch of wireguard: https://git.zx2c4.com/wireguard-linux/log/?h=backport-5.4.y Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Stijn Segers <foss@volatilesystems.org> (cherry picked from commit 2a3b2f59fec10d7c08f90f019b310db418e775bf)
* hostapd: fix handling of the channel utilization optionsTimo Sigurdsson2021-06-221-0/+2
| | | | | | | | | | | | | Commit 0a7657c ("hostapd: add channel utilization as config option") added the two new uci options bss_load_update_period and chan_util_avg_period. However, the corresponding "config_add_int" calls for these options weren't added, so attempting to actually use these options and change their values is bound to fail - they always stay at their defaults. Add the missing code to actually make these options work. Fixes: 0a7657c ("hostapd: add channel utilization as config option") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> (cherry picked from commit 85ce590705072be78c3ef7dc6b64e3b1facc892b)
* bcm4908: fix Ethernet broken state after interface restartRafał Miłecki2021-06-221-0/+43
| | | | | | | This fixes traffic stalls after ifdown & ifup. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f8d5bd20b31842ef7fdb740d27c70294f21c6124)
* bcm4908: add kmod-gpio-button-hotplugRafał Miłecki2021-06-221-0/+1
| | | | | | | | | All bcm4908 devices are expected to have GPIO buttons to make relevant package selected by default. This "fixes" triggering failsafe mode. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit fcfa60408c37a129b143e4928b6d86e383c2c8f6)
* base-files: fix typo in config_generate MAC checkRafał Miłecki2021-06-221-1/+1
| | | | | | Fixes: 125deb4d783e ("base-files: set MAC for bridge ports (devices) instead of bridge itself") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 946019637ec9192450c685a61c589a9cbef7637b)
* base-files: set MAC for bridge ports (devices) instead of bridge itselfRafał Miłecki2021-06-221-1/+9
| | | | | | | | | | | | | | This restores the original config_generate behaviour. With MAC set for bridged devices the bridge automatically gets its MAC adjusted (it picks the lowest MAC of bridged devices). This fixes confusing interfaces setup (bridge ports not having custom MAC assigned). Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Fixes: c2139eef279e ("base-files: simplify setting device MAC") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c8d8eb9d13fc6fc8b394a620c27995ee71d29c4d)
* hostapd: wolfssl: add RNG to EC keyDavid Bauer2021-06-212-1/+49
| | | | | | | | | | | Since upstream commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") WolfSSL requires a RNG for the EC key when built hardened which is the default. Set the RNG for the EC key to fix connections for OWE clients. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit ddcb970274c011d3db611ec39350ee4704ff0e02)
* wolfssl: always export wc_ecc_set_rngDavid Bauer2021-06-212-1/+51
| | | | | | | | | | | | | | | | Since commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") wolfssl requires a RNG for an EC key when the hardened built option is selected. wc_ecc_set_rng is only available when built hardened, so there is no safe way to install the RNG to the key regardless whether or not wolfssl is compiled hardened. Always export wc_ecc_set_rng so tools such as hostapd can install RNG regardless of the built settings for wolfssl. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit ef9b103107aebd1a54f4360af3d9cf28d0544f13)
* ath79: don't autodetect AR8033 PHY capabilitiesDavid Bauer2021-06-211-0/+25
| | | | | | | | | | | | | | | | | | PHY capabilities are currently read from the fiber status page, thus Linux won't advertise 10 / 100 Base-T operation modes, effectively limiting operation to 1000 Base-T. Statically set the PHYs capabilities, avoiding autodetection. The issue itself is properly fixed kernel upstream, however backporting efforts to OpenWrt master resulted in breaking the fiber operation for another target. This is currently only known to be necessary for the Ubiquiti UniFi AC series, so enabling it in the ath79 target should not break somewhere else. Signed-off-by: David Bauer <mail@david-bauer.net>
* build,json: fix generation with empty profilesPaul Spooren2021-06-211-1/+1
| | | | | | | | | If the image generation doesn't add any profiles to the output the *profile merge* will fail. To avoid that set an empty profile as fallback. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit fd0d9909bf50f114d5e7f7cedf53e542de878a2c)
* build: preserve profiles.json between buildsMoritz Warning2021-06-211-9/+23
| | | | | | | | | | | | | | Keep other profiles.json content if the data belongs to the current build version. Also useful for the ImageBuilder, which builds for a single model each time. Without this commit the profiles.json would only contain the latest build profile information. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit message] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit a463b96241fbc2d142982387eaed9989e201ac7a)
* qos-scripts: add ifbN device before setting the link upPerry Melange2021-06-212-2/+3
| | | | | | | | | | | | | commit 50413e1ec83dedaea44558d5f37af5454156a46a replaced ifconfig with ip. In order to set a link state to up, the interface needs to be added first. Fixes: FS#3754 Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com> [Add Fixes tag] Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org> (cherry picked from commit 23c3bab9209f984692f8206c0d97758ee223a26f)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 17:36:38 +0000