aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: Fix board-2.bin package name for Plasma Cloud PA1200Sven Eckelmann2021-09-191-1/+1
| | | | | | | | | | | | The board data file for the Plasma Cloud PA1200 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. A typo in the device package name resulted in a not correctly selected package for the device specific board-2.bin. The wifi driver has therefore loaded the wrong calibration information into the wifi chip. Fixes: ea5bb6bbfee0 ("ipq40xx: add support for Plasma Cloud PA1200") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit d0ffc175350f2be6174932dc0afd4d2737afe52d)
* ipq40xx: Select correct board-2.bin for EnGenius EMR3500Sven Eckelmann2021-09-191-0/+1
| | | | | | | | | | The board data file for the EnGenius EMR3500 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. As result, the wrong calibration information will be loaded into the wifi chip. Fixes: 3f61e5e1b97e ("ipq40xx: add support for EnGenius EMR3500") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 14bd392a1cd0b8e267e4402ae27b3c5a8f66b933)
* ipq40xx: Select correct board-2.bin for EnGenius EMD1Sven Eckelmann2021-09-191-0/+1
| | | | | | | | | | The board data file for the EnGenius EMD1 is not part of the default board-2.bin which is shipped by ath10k-board-qca4019. As result, the wrong calibration information will be loaded into the wifi chip. Fixes: 51f303597839 ("ipq40xx: add support for EnGenius EMD1") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit d9f4a4280e674ddb4ec75ae2d73b0f86e0c282cc)
* kernel: backport switchdev fix for bridge in bridge configurationsFabian Bläse2021-09-131-0/+60
| | | | | | | | | | | | | | | | | | | | This patch fixes the forwarding behavior of bridge in bridge configurations with DSA. Without it, the configuration of the upper bridge might overwrite settings of the lower bridge. For example, a vlan-aware bridge with DSA interfaces in it might be offloaded to the DSA hardware. If the bridge interface itself gets slave of a different bridge without vlan filtering, the vlan filtering setting of the lower bridge is overwritten by the upper bridge, which results in an incorrect hardware configuration. This was backported from kernel 5.7. Ref: https://lore.kernel.org/netdev/20191222192235.GK25745@shell.armlinux.org.uk/ Fixes: FS#3996 Signed-off-by: Fabian Bläse <fabian@blaese.de> (cherry picked from commit c50ece58c41647880cc74c927d98b465cdfbdad8)
* kernel: Add missing kernel config optionsHauke Mehrtens2021-09-134-5/+3
| | | | | | | | These options are selectable when some of the kernel debug options like KERNEL_SOFTLOCKUP_DETECTOR are selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1a3b3dc7974c98843baeb22251dc4c580dc771d6)
* build: Replace KERNEL_LOCKUP_DETECTOR with KERNEL_SOFTLOCKUP_DETECTORHauke Mehrtens2021-09-131-16/+4
| | | | | | | | | | | | | | The LOCKUP_DETECTOR configuration option split into the SOFTLOCKUP_DETECTOR and HARDLOCKUP_DETECTOR configuration option some time ago. The HARDLOCKUP_DETECTOR option is only working on some architectures, but SOFTLOCKUP_DETECTOR should work everywhere. Replace KERNEL_LOCKUP_DETECTOR with KERNEL_SOFTLOCKUP_DETECTOR. LOCKUP_DETECTOR will be selected by SOFTLOCKUP_DETECTOR automatically. Fixes: b951f53fbae3 ("build: Add additional kernel debug options") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d27f6e2c5d2a2315cc8fe684d117c80aa9984ca8)
* kirkwood: increase kernel partition of LinksysesPawel Dembicki2021-09-132-4/+6
| | | | | | | | | | | | | | | At this moment kernel partition in Linksyses EA3500/E4200/EA4500 is ended before start of rootfs partition. It was introduced in 9808b9ae02 and it broke easy revert to stock. Sysupgrade, when OFW is used, write whole stock image to kernel partition. Most likeley image will be bigger than small kernel partition and it make stock system invalid. This patch change size of kernel partitions and now it overlaps rootfs. Revert to stock will be possible again. Fixes: 9808b9ae02 ("kirkwood: switch to kernel 4.9") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* mvebu: limit mvneta tx queue workaround to 32 bit SoCTomasz Maciej Nowak2021-09-091-2/+6
| | | | | | | | | | | | | This patch has been carried since introduction throughout every kernel major bump and no one has tested if the later kernels improved the situation. The Armada 3720 SoC can only process GbE interrupts on Core 0 and this is already limited in all stable kernels, so ditch this workaround for 64 bit SoCs. Ref: https://git.kernel.org/torvalds/c/cf9bf871280d Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (cherry picked from commit cbdd2b62e4d5e0572204c37d874d32dc8610840e)
* OpenWrt v21.02.0: revert to branch defaultsHauke Mehrtens2021-09-015-11/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0: adjust config defaultsv21.02.0Hauke Mehrtens2021-09-015-10/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: add support for onion omegaJan-Niklas Burfeind2021-09-013-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Onion Omega is a hardware development platform with built-in WiFi. https://onioniot.github.io/wiki/ Specifications: - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor) - 64MB of DDR2 RAM running at 400 MHz - 16MB of on-board flash storage - Support for USB 2.0 - Support for Ethernet at 100 Mbps - 802.11b/g/n WiFi at 150 Mbps - 18 digital GPIOs - A single Serial UART - Support for SPI - Support for I2S Flash instructions: The device is running OpenWrt upon release using the ar71xx target. Both a sysupgrade and uploading the factory image using u-boots web-UI do work fine. Depending on the ssh client, it might be necessary to enable outdated KeyExchange methods e.g. in the clients ssh-config: Host 192.168.1.1 KexAlgorithms +diffie-hellman-group1-sha1 The stock credentials are: root onioneer For u-boots web-UI manually configure `192.168.1.2/24` on your computer, connect to `192.168.1.1`. MAC addresses as verified by OEM firmware: 2G phy0 label LAN eth0 label - 1 LAN is only available in combination with an optional expansion dock. Based on vendor acked commit: commit 5cd49bb067ca ("ar71xx: add support for Onion Omega") Partly reverts: commit fc553c7e4c8e ("ath79: drop unused/incomplete dts") Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> (cherry picked from commit d98738b5c118fc45068b45f07b8b6938e91f35d2)
* kernel: bump 5.4 to 5.4.143Hauke Mehrtens2021-08-2917-64/+25
| | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.4/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.4/100-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* openssl: bump to 1.1.1lEneas U de Queiroz2021-08-282-5/+4
| | | | | | | | | | | | This version fixes two vulnerabilities: - SM2 Decryption Buffer Overflow (CVE-2021-3711) Severity: High - Read buffer overruns processing ASN.1 strings (CVE-2021-3712) Severity: Medium Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 7119fd32d397567931e63dbbf72014e95624018f)
* prereq-build: require python3-distutilsAndre Heider2021-08-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Debian and Ubuntu ship a python3-minimal package which does not include the distutils module. This is not supported by upstream and can be considered a broken python distribution. In practice, many scripts depend on said module, and this is a reoccuring pain point for building various OpenWrt packages. Require and check for said module, enough time has been wasted on this. A list of just the most recent issues: https://github.com/openwrt/packages/pull/16304 https://github.com/openwrt/packages/pull/16027 https://github.com/openwrt/packages/pull/15443 https://github.com/openwrt/packages/pull/14394 https://github.com/openwrt/packages/pull/12909 https://github.com/openwrt/packages/issues/12443 https://github.com/openwrt/packages/pull/11035 https://github.com/openwrt/packages/issues/10993 Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 60af8d753343691c4a647bfc7c51ef6eb92df9f2)
* uboot-layerscape: fix dtc compilation on host gcc 10Hauke Mehrtens2021-08-281-0/+46
| | | | | | | Backport a patch from upstream U-Boot to fix the compile with host GCC 10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8d143784cb8fafccdbcdc0bd5d1aa47d3d676f70)
* uboot-at91: fix dtc compilation on host gcc 10Hauke Mehrtens2021-08-282-9/+49
| | | | | | | Backport a patch from upstream U-Boot to fix the compile with host GCC 10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit a1034afba8ea8bec48e2528fdae0fb74a6757e53)
* kernel: bump 5.4 to 5.4.142David Bauer2021-08-2428-215/+77
| | | | | | | Compile-tested: ath79-generic ipq40xx-generic Run-tested: ipq40xx-generic Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq40xx: fix Edgecore ECW5211 bootStijn Tintel2021-08-241-0/+1
| | | | | | | | The bootloader will look for a configuration section named ap.dk01.1-c2 in the FIT image. If this doesn't exist, the device won't boot. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit a43da1be43ae251f0edaa6419612e600fc6ec972)
* ath79: kernel: Add missing quote to drivers/mfd/KconfigPaul Blazejowski2021-08-221-1/+1
| | | | | | | | | | | | | | | A missing quote in target/linux/ath79/patches-5.x/920-mikrotik-rb4xx.patch produces: ... scripts/kconfig/conf --syncconfig Kconfig drivers/mfd/Kconfig:2016:warning: multi-line strings not supported ... This patch adds missing closing quote, fixing the above warning. Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net> (cherry picked from commit f7374bce00a97fda78ace3acaef48369e8246814)
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2021-08-211-2/+2
| | | | | | Properly recognise all BCM2711 variants Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-userland: factor out a -dev packageMichael Heimpold2021-08-181-4/+30
| | | | | | | | | | | | Installing headers and static libraries to the target system seems to be not required for most use cases, so let's factor them out into a dedicated -dev package. This cuts down to disk usage to around 50% of the original package to ~ 2MB - not that disk space is an issue normally, but when using inside an initramfs only project, it counts. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* x86: kernel: set NR_CPUS to 512Edgar Su2021-08-111-2/+2
| | | | | | | | | | | NR_CPUS limits the number of CPUs supported to 8. This makes total sense on hardware-restircted platforms, but not on x86_64, where CPUs with more than 8 cores can be easily acquired and with less physical limitaions. see also: https://forum.openwrt.org/t/x86-64-8-cpu-limitation-on-vanilla-release/100946 Signed-off-by: Edgar Su <sjs333@outlook.com> (cherry picked from commit df554e6fcab171ec499d8fb2ed10a0da328323f3)
* fritz-tools: fix returning wrong values due to strncmp usageDaniel Kestrel2021-08-082-2/+2
| | | | | | | | | | | | | | | | | When having two keys that start with the same characters and the second key just has one character more nand_tffs_read and tffs_read return the wrong value for the longer key. This is due to the usage of strncmp in combination with the length of the shorter key which is usually first in the list before the longer key and when strncmp matches, the search is stopped. The problem only occurs when the length of the two keys is different, not if just the last character is different. The fix is to use strcmp and as such it will only return the value if the key (name) and the key to look for (namefilter) have the same value and length. A sample case returning wrong values is when keys macwlan and macwlan2 are defined and querying macwlan2 returns the value for macwlan. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de> (cherry picked from commit 12564c5b860f9849c9a2fb7026c2c11150b9a4fc)
* mbedtls: update to 2.16.11Rosen Penev2021-08-081-3/+3
| | | | | | | | | | Switched to AUTORELEASE to avoid manual increments. Release notes: https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.11 Signed-off-by: Rosen Penev <rosenp@gmail.com> (cherry picked from commit fcfd741eb83520e496eb09de5f8b2f2b62792a80)
* mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHzJosef Schlehofer2021-08-081-0/+39
| | | | | | | | | | | This patch is backported from linux-arm-kernel [1] to improve situation, when it was reported that 1.2 GHz variant is unstable with DFS. It waits to be accepted upstream, however, it waits for Marvell people to respond. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210630225601.6372-1-kabel@kernel.org/ Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit d3794768177293f584cc74f90c921276793da1e7)
* Revert "mvebu: 5.4 fix DVFS caused random boot crashes"Josef Schlehofer2021-08-081-107/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Based on the discussion on the mailing list [1], the patch which was reverted, it reverts only one patch without the subsequent ones. This leads to the SoC scaling issue not using a CPU parent clock, but it uses DDR clock. This is done for all variants, and it's wrong because commits (hacks) that were using the DDR clock are no longer in the mainline kernel. If someone has stability issues on 1.2 GHz, it should not affect all routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to improve the situation in the kernel and not making the situation worse. There are two solutions in cases of instability: a) disable cpufreq b) underclock it up to 1 GHz This reverts commit 080a0b74e39d159eecf69c468debec42f28bf4d8. [1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html CC: Pali Rohár <pali@kernel.org> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 7b868fe04a8961048feec1143e72fe47bde52a12)
* dnsmasq: reset EXTRA_MOUNT in the right placeDaniel Golle2021-08-021-2/+2
| | | | | | | | | | EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than just once at the beginning of the script. Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ddc8d085f39dea998f59680fb556ca72d779a3b1)
* dnsmasq: fix more dnsmasq jail issuesDaniel Golle2021-08-021-10/+26
| | | | | | | | | | | | | * remove superflus mounts of /dev/null and /dev/urandom * reset EXTRA_MOUNTS at the beginning of the script * add mount according to ignore_hosts_dir * don't add mount for file which is inside a directory already in the EXTRA_MOUNTS list Fixes: 59c63224e1 ("dnsmasq: rework jail mounts") Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ac4e8aa2f8d98158ea7b749f877269f1f5fa9c5a)
* dnsmasq: rework jail mountsDaniel Golle2021-08-021-1/+7
| | | | | | | | | | | | | * split into multiple lines to improve readability * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts * remove no longer needed mount for /sbin/hotplug-call * add dhcp-script.sh dependencies (jshn, ubus) Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount") Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call") Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 59c63224e11d6c4eca27131a73bf16218e47a271)
* dnsmasq: use local option for local domain parameterKevin Darbyshire-Bryant2021-08-021-1/+1
| | | | | | | | | | | '--local' is a synonym for '--server' so let's use '--local' in the resultant config file for uci's 'local' instead of uci's local parameter being turned into '--server'. Slightly less confusion all round. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit e4cfefa9fc3d22da5705b554785ba9c533c373d0) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: add ignore hosts dir to dnsmasq init scriptJoão Henriques2021-08-021-1/+6
| | | | | | | | | | When running multiple instances of dnsmasq, for example one being for the lan and another for a guest network, it might not be desirable to have the same dns names configured in both networks Signed-off-by: João Henriques <joaoh88@gmail.com> (cherry picked from commit e8a5670122e04574fdb5855ecd63d18f317c5bfd) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* OpenWrt v21.02.0-rc4: revert to branch defaultsHauke Mehrtens2021-08-015-11/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v21.02.0-rc4: adjust config defaultsv21.02.0-rc4Hauke Mehrtens2021-08-015-10/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-3166-150/+151
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: mt76x8: add missing config symbolDavid Bauer2021-07-301-0/+1
| | | | | | PWM_MEDIATEK was not defined, breaking builds for the mt76x8 subtarget. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: move Kconfig symbol to common configDavid Bauer2021-07-304-3/+1
| | | | | | | This is required for all x86 targets. x86-legacy missed this config symbol, breaking the build. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing Kconfig symbolDavid Bauer2021-07-301-0/+2
| | | | | | Fixes build errors for sunxi as well as rockchip targets. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix JT-OR750i switch LED assignmentDavid Bauer2021-07-291-2/+2
| | | | | | | | The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate the LED on port 3 and vice versa. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0a885ed8636b9762d12f2eb2755f63297ff0cb5)
* ath79: enable missing pinmux for JT-OR750iDavid Bauer2021-07-291-0/+3
| | | | | | | | Without explicit configuration of these pins the ethernet as well as status LED of the device do not work correctly. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4feb9a4211d4c8e118e6b8f01fa0bbd4eab5d35c)
* ath79: add support for Joy-IT JT-OR750iVincent Wiemann2021-07-295-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM * 802.11n 2T2R (external antennas) * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas) * 3x 10/100 LAN, 1x 10/100 WAN * UART header with pinout printed on PCB Installation: * The device comes with a bootloader installed only * The bootloader offers DHCP and is reachable at http://10.123.123.1 * Accept the agreement and flash sysupgrade.bin * Use Firefox if flashing does not work TFTP recovery with static IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server at 192.168.0.66 * Keep the reset button pressed for 4 seconds after connecting power TFTP recovery with dynamic IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server with a DHCP server running at the same address * Keep the reset button pressed for 6 seconds after connecting power Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> (cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655)
* netifd: update to the latest versionFelix Fietkau2021-07-261-3/+3
| | | | | | | 440eb0647708 bridge: fix regression in bringing up bridge ports Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 39f81b0bf687017b4d086255c94166e662ac177e)
* netifd: update to the latest versionFelix Fietkau2021-07-251-3/+3
| | | | | | | | 85f01c44a950 bridge: check bridge port vlan membership on link-up events 17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 2801fe6132c4e2e364e2d5a304594185351b501b)
* glibc: update to latest 2.33 HEAD (bug 28011)Hans Dedecker2021-07-191-2/+2
| | | | | | | | b5711025bc x86_64: Remove unneeded static PIE check for undefined weak diagnostic edfd11197e wordexp: handle overflow in positional parameter number (bug 28011) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 9d2dcc83128a035262bf15b8bbd1f57622465b42)
* glibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)Hans Dedecker2021-07-191-2/+2
| | | | | | | | | | 58b90461ae elf: Use _dl_catch_error from base namespace in dl-libc.c [BZ #27646] 8c06748c51 Fix use of __pthread_attr_copy in mq_notify (bug 27896) 4b6be914bd Use __pthread_attr_copy in mq_notify (bug 27896) f4cba6ca1e dlfcn: Failures after dlmopen should not terminate process [BZ #15271] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit f033d5ad1c28e07eb6de2ce3ea8650dc7080d6d0)
* dnsmasq: distinct Ubus names for multiple instancesEtan Kissling2021-07-191-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, when using multiple dnsmasq instances they are all assigned to the same Ubus instance name. This does not work, as only a single instance can register with Ubus at a time. In the log, this leads to `Cannot add object to UBus: Invalid argument` error messages. Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes behaviour so that instead of the log, dnsmasq exits at start instead. With this patch, all dnsmasq instances are assigned unique names so that they can register with Ubus concurrently. One of the enabled instances is always assigned the previous default name "dnsmasq" to avoid breaking backwards compatibility with other software relying on that default. Previously, a random instance got assigned that name (while the others produced error logs). Now, the first unnamed dnsmasq config section is assigned the default name. If there are no unnamed dnsmasq sections the first encountered named dnsmasq config section is assigned instead. A similar issue exists for Dbus and was similarly addressed. Signed-off-by: Etan Kissling <etan.kissling@gmail.com> [tweaked commit message] dnsmasq was not crashing it is exiting Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit ba5bd8e556b2e7573d27b16e005ba287e066f795)
* kernel: bump 5.4 to 5.4.132Hauke Mehrtens2021-07-1942-131/+131
| | | | | | | | | | | | Manually rebased layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All others updated automatically. Compile-tested on: ramips/mt7621 Runtime-tested on: ramips/mt7621 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: add /tmp/hosts/ to jail_mountNick Hainke2021-07-191-1/+1
| | | | | | | | Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/". If you don't add this to the jail_mount, dnsmasq can't read it anymore. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 3a94c2ca5cf7c11ca150fa3ae884e7be8d07a281)
* odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)Hans Dedecker2021-07-191-3/+3
| | | | | | | bc9d317 dhcpv6-ia: fix invalid preferred lifetime Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 033d5ff25eaf4facbaab09153982e7321fe282e6)
* ipq40xx: fix FRITZRepeater 1200 RGMII delayDavid Bauer2021-07-171-1/+1
| | | | | | | | | | | | | | | When the AVM FRITZ!Repeater 1200 was introduced on Kernel 4.19, the at803x PHY driver incorrectly set up the delays, not disabling delays set by the bootloader. The PHY was always operating with RX as well as TX delays enabled, but with kernel 5.4 and later, the required TX delay is disabled, breaking ethernet operation. Correct the PHY mode, so the driver enables both delays. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f9d18281051c894eacd40f10c10b430c6c9082ad)
* netifd: update to the latest versionFelix Fietkau2021-07-141-3/+3
| | | | | | | 7f24a063475e vlan: fix device vlan alias handling Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d1a812c49b57636efcb9ef6f5f0aff4f11eb6b36)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 13:17:57 +0000