aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* usbutils: Update usb.ids database to 2016.10.13Daniel Engberg2017-01-101-4/+4
| | | | | | Update usb.ids database to 2016.10.13 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ipq806x: fix pvs1_bin voltage in ipq8065 DTPavel Kubelun2017-01-101-7/+7
| | | | | | | | | | | | | | Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK. Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table. Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has correct values in DT, but in future a new device may choose n1 or n6. Without this change n1 is semi-correct and n6 is not available, because OPP driver disregards bins with voltage values that regulator cannot supply. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* cyassl: update to wolfssl version 3.10.0Hauke Mehrtens2017-01-101-3/+4
| | | | | | | This fixes a low level security vulnerability. Deactivate MIPS16 support, crypto code gets much slower with MIPS16. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: update USB controller initializationHauke Mehrtens2017-01-0911-95/+394
| | | | | | | | | | | | | This adds USB initialization fixes for Danube, Amazon SE and xrx300 and should fix the clock on at least Danube which hopefully closes FS#351. The xrx200 usb driver now uses more memory for the dwc2 fifos, this was increased in the chip compared to ar9. This is based in part on the vendor documentation and the vendor code base as a reference. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix dma locking problems with SMPHauke Mehrtens2017-01-091-0/+152
| | | | | | | The DMA controller used only local locks, which will not lock the section against other CPUs, fix this by using spin locks. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools: remove obsolete yaffs toolFelix Fietkau2017-01-094-176/+1
| | | | | | This was added a long time ago and was apparently never used Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: reorganize dependencies, fix build after deleting staging dirFelix Fietkau2017-01-092-12/+18
| | | | | | | | | | | A lot of packages (especially those using libtool) depend on sed being available. xz fails on an incremental build pretty early if it's not there. Clean up handling if essential core tools (patch, tar, xz), build them in parallel and make them depend on sed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* px5g: remove obsolete reference to $(BUILD_VARIANT)Felix Fietkau2017-01-091-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix build of ubifs imagesFelix Fietkau2017-01-092-6/+6
| | | | | | --force-compr was added by the xz compression patch, which is gone now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix image boot ubifs compression optionFelix Fietkau2017-01-091-1/+1
| | | | | | --force-compr was added by the xz compression patch, which is gone now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ustream-ssl: remove legacy polarssl supportFelix Fietkau2017-01-091-12/+0
| | | | | | | The old polarssl 1.3 branch is EOL since end of 2016, and the package for it will be removed soon. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* px5g: remove legacy polarssl supportFelix Fietkau2017-01-092-61/+33
| | | | | | | The old polarssl 1.3 branch is EOL since end of 2016, and the package for it will be removed soon. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove ubifs xz decompression supportFelix Fietkau2017-01-0928-1128/+5
| | | | | | | It has been unused, and less useful than squashfs for cases where flash space usage matters. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcp6c: add option "keep_ra_dnslifetime"Hans Dedecker2017-01-092-5/+8
| | | | | | | | | | Add option keep_ra_dnslifetime which will preserve the received lifetime for RDNSS and DNSSL RA records and not overwrite it by the RA router lifetime as specified in RFC6106. This allows to accept RDNNS records from RAs that don't announce a default route by setting router lifetime to 0 in the RAs. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mbedtls: re-enable CFB supportFelix Fietkau2017-01-091-9/+0
| | | | | | It is safe and required by some software, e.g. shadowsocks Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Makefile: ensure that BIN_DIR exists for diffconfigHannu Nyman2017-01-081-0/+1
| | | | | | | Ensure that BIN_DIR exists when the diffconfig target needs it. Otherwise 'make diffconfig' fails after 'make clean' Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uboot-mvebu: enable loader with the default profileFelix Fietkau2017-01-081-1/+1
| | | | | | Fixes build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mbedtls: re-enable RC4 support (needed by transmission and others)Felix Fietkau2017-01-081-9/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: bump to git HEADHans Dedecker2017-01-071-3/+3
| | | | | | | | | | ef3c563 dhcpv6-ia: filter out prefixes having invalid length 16cd87e dhcpv6-ia: fix dereference after freeing assignment d6b0c99 dhcpv6-ia: log only IPv6 addresses which are effectively assigned to a DHCPv6 client 08a9367 config: respect ignore uci option Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "gdb: fix build with gcc 4.1.2 as host compiler"Hauke Mehrtens2017-01-071-16/+0
| | | | | | | | Support for such old gcc version is not needed. This reverts commit 2694d43b052a1bf1721ae477dcdbe787f5995d35. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* zlib: update to 1.2.10Magnus Kroken2017-01-071-2/+2
| | | | | | | * Fix bug in deflate_stored() for zero-length input * Fix bug in gzwrite.c that produced corrupt gzip files Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* rb532: drop patch-cmdline from base-filesFelix Fietkau2017-01-072-90/+0
| | | | | | It is no longer used for upgrading Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: switch to UBI, drop yaffs2 support, use sysupgrade for NANDFelix Fietkau2017-01-079-162/+105
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rb532: convert to new loopback based overlay supportFelix Fietkau2017-01-073-36/+52
| | | | | | Disable block2mtd support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add image command for calling kernel2minorFelix Fietkau2017-01-071-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: minor kernel config improvementsDaniel Golle2017-01-071-1/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: require image metadataDaniel Golle2017-01-071-0/+1
| | | | | | | Now that we generate images with metadata attached, require it in order to prevent accidentally flashing the wrong image to a board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: remove some kprintf calls from NAND driverDaniel Golle2017-01-071-5/+0
| | | | | | They were added for debugging and I forgot to remove them. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lantiq: fix console print for additional boardsHauke Mehrtens2017-01-063-0/+12
| | | | | | | | | | | | | | I missed 3 boards in this commit: commit d8dde8c5178eba8c847dd48e7d06e6663ba1979f Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Wed Jan 4 21:53:22 2017 +0100 lantiq: fix console print Add bootargs parameters for ARV4525PW, ARV7506PW11 and ARV8539PW22 again. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump to 4.4.40Hauke Mehrtens2017-01-0624-153/+48
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/kernel2minor: fix permissions of created filesFelix Fietkau2017-01-061-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport cfg80211 support for ieee80211-freq-limit DT propertyRafał Miłecki2017-01-062-0/+312
| | | | | | | | This property allows specifying extra limits for wireless device in DT. For a full documentation see upstream commit b330b25eaabd ("dt-bindings: document common IEEE 802.11 frequency limit property"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* x86: add kernel module for AMD CS5535/CS5536 audio chipsetCezary Jackiewicz2017-01-061-0/+21
| | | | | | | | Add support for the integrated AC97 sound device on motherboards with AMD CS5535/CS5536 chipsets. Tested on Wyse Winterm S30. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* tools/kernel2minor: fix endian conversion issues, allow creating ↵Felix Fietkau2017-01-061-0/+33
| | | | | | little-endian images Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/kernel2minor: fix portability issueFelix Fietkau2017-01-061-0/+13
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: save /bin/mknod for sysupgradeFelix Fietkau2017-01-061-1/+2
| | | | | | It is used on NAND devices in case hotplug is too slow Signed-off-by: Felix Fietkau <nbd@nbd.name>
* yaffs: fix to detect MLC/TLC NAND flashVladimir Zahradnik2017-01-062-2/+2
| | | | Signed-off-by: Vladimir Zahradnik <vladimir.zahradnik@gmail.com>
* lantiq: fix console printHauke Mehrtens2017-01-0535-4/+128
| | | | | | | | | | | | | | | | | | The boot loader of many boards provides a kernel boot argument with a broken console parameter to the kernel. This will be taken before the stdout-path defined in device tree and the serial will not work on this board. Multiple boards are affected by this problem, so revert this patch for all boards. Later we can remove the boot arguments from the device tree again, after the individual board was checked to work. This partly reverts this commit: commit 4995c64857a09c4cc92238ba0bd52cdb06c4c581 Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Date: Sun Dec 11 21:55:00 2016 +0100 lantiq: specify console using stdout-path instead of cmdline argument Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: update to version 4.15Hauke Mehrtens2017-01-052-5/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: change 'add_local_hostname' to use dnsmasq '--interface-name'Eric Luehrsen2017-01-052-23/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | 'add_local_hostname' previous implementation may drop some addresses. Soft addition of IP6 addresses may not cause a reload or restart event. dnsmasq '--interface-name' robustly applies DNS to all addresses per interface (except fe80::/10). Change UCI 'add_local_hostname' to expand during each interface assignement during add_dhcp(). Assign '<iface>.<host>.<domain>' as true name (reflexive A, AAAA, and PTR). Assign '<host>.<domain>' and '<host>' as convinience aliases (no PTR, not technically CNAME). This is accomplished with the '--interface-name' order, first is PTR. We could also assign each <ip4/6>.<iface>.<host>.<domain> to the respective dual stack on the interface. That seemed excessive so it was skipped (/4 or /6 suffix to the interface). Add UCI 'add_wan_hostname' similar to 'add_local_hostname' function for external WAN. WAN IP4 are less often named by the ISP and rarely WAN IP6 due to complexity. For logs, LuCI connection graph, and other uses assigning a WAN name is desired. 'add_local_hostname' only applies with DHCP and 'add_wam_hostname' only applies without DHCP. Common residential users will want to set both options TRUE. Businesses will probably have global DNS, static IP, and 'add_wan_hostname' FALSE. Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* dnsmasq: clean up white space in dnsmasq.initEric Luehrsen2017-01-051-16/+16
| | | | Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
* ar71xx: add support for TP-Link WBS210/510Matthias Schiffer2017-01-058-8/+95
| | | | | | | The devices are mostly identical to the CPE210/510, but use external antennas. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* firmware-utils: tplink-safeloader: add support for TP-Link WBS210/510 1.2Matthias Schiffer2017-01-051-0/+62
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* tools: cmake: use different approach for passing LDFLAGSJo-Philipp Wich2017-01-051-3/+5
| | | | | | | Funnel the required LDFLAGS environment through HOST_CONFIGURE_CMD for now as the HOST_CONFIGURE_VARS semantics are completely broken. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "build: fix HOST_CONFIGURE_VARS placement"Jo-Philipp Wich2017-01-051-1/+1
| | | | | | | | | This reverts commit 8395b63aac616f72fd835c59240fc2a4a6b28106. Various host builds currently rely on the broken behaviour of HOST_CONFIGURE_VARS so roll back to the previous state. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: cmake: use pkg-config to discover libcrypto linker flagsJo-Philipp Wich2017-01-051-1/+2
| | | | | | | | | LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime() on Linux. Use pkg-config to portably discover the required linker flags. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: mkimage: use pkg-config to discover libcrypto linker flagsJo-Philipp Wich2017-01-051-2/+2
| | | | | | | | | LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime() on Linux. Use pkg-config to portably discover the required linker flags. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools: make libressl build depend on pkg-configJo-Philipp Wich2017-01-051-0/+1
| | | | | | | Ensure that pkg-config is available before building libressl as we're going to need it for setting proper link flags in utilities requiring libcrypto. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix HOST_CONFIGURE_VARS placementJo-Philipp Wich2017-01-051-1/+1
| | | | | | | | | | Ensure that HOST_CONFIGURE_VARS are set before the actual configure command instead of passing them as configure command arguments. This change brings host-build.mk in line with package-defaults.mk and makes host configure environment variables work as expected. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* cmake: update to version 3.7.1Felix Fietkau2017-01-054-571/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 16:53:04 +0000