aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* scripts/mkits.sh: fix improper string and array concatenationRosen Penev2020-07-111-1/+1
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/mkits.sh: add missing quotesRosen Penev2020-07-111-2/+2
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/mkits.sh: replace echo -e with printfRosen Penev2020-07-111-12/+12
| | | | | | echo flags are not POSIX. printf does the same with added \n. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen_image_generic.sh: fix more shellcheck warningsPetr Štetiar2020-07-111-4/+3
| | | | | | | | | | | | | | | | | | Fixes following shellcheck warnings: In scripts/gen_image_generic.sh line 20: cyl=$(( (KERNELSIZE + ROOTFSSIZE) * 1024 * 1024 / (head * sect * 512))) ^-^ SC2034: cyl appears unused. Verify use (or export if used externally). -- In scripts/gen_image_generic.sh line 34: [ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$(($ROOTFSOFFSET + $ROOTFSSIZE))" conv=notrunc count="$sect" ^-----------^ SC2004: $/${} is unnecessary on arithmetic variables. -- In scripts/gen_image_generic.sh line 35: mkfs.fat -n kernel -C "$OUTPUT.kernel" -S 512 "$(($KERNELSIZE / 1024))" ^---------^ SC2004: $/${} is unnecessary on arithmetic variables. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/gen_image_generic.sh: use /bin/shRosen Penev2020-07-111-1/+1
| | | | | | This has nothing bash specific. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen_image_generic.sh: replace -o with if/&&Rosen Penev2020-07-111-2/+2
| | | | | | | | -o is not well defined. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: fix remaining shellcheck warningPetr Štetiar2020-07-111-1/+1
| | | | | | | | | | Fixes following shellcheck warning: In scripts/env line 25: exit ${1:-1} ^-----^ SC2086: Double quote to prevent globbing and word splitting. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/env: use read -r instead of readRosen Penev2020-07-111-1/+1
| | | | | | | | read mangles backslashes. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: exit in case of failure to cdRosen Penev2020-07-111-1/+1
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: replace \! with !Rosen Penev2020-07-111-2/+2
| | | | | | | The latter is more standard. The former throws an error under shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: use command -v instead of whichRosen Penev2020-07-111-1/+1
| | | | | | | | Simpler and built in to the shell. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: reduce number of files passed to ipk-removeEneas U de Queiroz2020-07-111-11/+8
| | | | | | | | | | | | | | | | | | | | Instead of using xargs to pass a huge number of files to script/ipkg-remove, which will usually pick only one, use a more restrictive wildcard so that, currently, at the most 325 files are examined, instead of up to over 2,300. The 325-file package is python, which is picking up python3* ipks. It is about to be removed. Runner-up is ddns-scripts with 7 files. This makes a second run of make package/luci/compile go from real 16.40s; user 17.42s; sys 2.73s to real 10.71s; user 9.51s; sys 1.27s There is a caveat though: if one were to remove the ABI_VERSION of a package that ends in a digit [0-9], then the old package ipk will not be removed from the bin directory by make package/abc2/clean. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: call ipkg-remove using xargs if #args>=512Eneas U de Queiroz2020-07-111-1/+11
| | | | | | | | | | | | | The wildcard call to clean up luci package (luci*) can pick up over 2,300 files when the full tree is built. Running make package/luci/clean or a second run of make package/luci/compile would fail with an 'Argument list too long' error. To avoid that, a maybe_use_xargs function was created that runs the command straight as usual if the number of arguments is < 512, or saves the list in a temporary file and feeds it to xargs otherwise. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: package-ipkg: avoid calling wildcard twiceEneas U de Queiroz2020-07-111-2/+8
| | | | | | | | Instead of calling $(wildcard) to check if the removal list is empty, then calling it again to actually remove the files, define a function so that the arguments are expanded only once when it gets called. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* toolchain/wrapper.sh: fix remaining shellcheck warningsPetr Štetiar2020-07-111-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following warnings: In target/toolchain/files/wrapper.sh line 18: REALNAME=$(readlink -f $0) ^-- SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 20: REALNAME_BASE=$(basename $REALNAME) ^-------^ SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 21: REALNAME_DIR=$(dirname $REALNAME) ^-------^ SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 74: exec $TARGET_TOOLCHAIN_TRIPLET-$BINARY.bin $GCC_SYSROOT_FLAGS $TARGET_FUNDAMENTAL_CFLAGS $TARGET_ROOTFS_CFLAGS "$@" ^-----------------------^ SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 77: exec $TARGET_TOOLCHAIN_TRIPLET-$BINARY.bin $LD_SYSROOT_FLAGS $TARGET_FUNDAMENTAL_LDFLAGS "$@" ^-----------------------^ SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 80: exec $TARGET_TOOLCHAIN_TRIPLET-$BINARY.bin $TARGET_FUNDAMENTAL_ASFLAGS "$@" ^-----------------------^ SC2086: Double quote to prevent globbing and word splitting. -- In target/toolchain/files/wrapper.sh line 83: exec $TARGET_TOOLCHAIN_TRIPLET-$BINARY.bin "$@" ^-----------------------^ SC2086: Double quote to prevent globbing and word splitting. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain/wrapper.sh: Replace read with read -rRosen Penev2020-07-111-1/+1
| | | | | | | | Without -r, backslashes would get mangled. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* toolchain/gdb: Don't use gdb-arcRosen Penev2020-07-111-11/+0
| | | | | | GDB got support for ARC with version 8.2. No need for this fork. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: kmod-zram: break the strict dependency from lz4Rui Salvaterra2020-07-112-4/+2
| | | | | | | | Zram is only strictly dependent on lzo, not lz4. Break this dependency and make the lz4 module visible in the configuration, in order for the user to have the choice of enabling/disabling it, if (s)he sees fit. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* zram-swap: correctly express the required dependenciesRui Salvaterra2020-07-111-1/+1
| | | | | | | | The block-mount swapon implementation doesn't support discard, so make zram-swap depend only on the default BusyBox implementation or, when unavailable, on the one present in the swap-utils package. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* zram-swap: enable swap discardRui Salvaterra2020-07-111-1/+1
| | | | | | | | | | | Zram block devices have supported trim/discard for over six years, let's enable it. This allows the zram device to actually free up allocated memory when it's marked as unused in the filesystem metadata, as explained in more detail in the original commit message [1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/block/zram/zram_drv.c?h=linux-4.14.y&id=f4659d8e620d08bd1a84a8aec5d2f5294a242764 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* busybox: use CLOCK_MONOTONIC instead of gettimeofdayRui Salvaterra2020-07-111-1/+1
| | | | | | | | | | | The clock_gettime(CLOCK_MONOTONIC) syscall exists for so long that the first kernel version to support it is not even specified in the man page [1]. Let's enable it on BusyBox by default. Otherwise, gettimeofday will be used instead, which will give wrong results if the date/time is reset (time moving backwards). [1] https://linux.die.net/man/2/clock_gettime Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lzo: switch to building with CMakeRosen Penev2020-07-111-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | CMake is less error prone that autotools and also compiles faster. Fixed license information. Added pkgconfig file to InstallDev so that packages that use it can find lzo. Before: time make package/lzo/compile -j 12 ________________________________________________________ Executed in 20.87 secs fish external usr time 26.95 secs 0.00 micros 26.95 secs sys time 5.49 secs 305.00 micros 5.49 secs After: time make package/lzo/compile -j 12 ________________________________________________________ Executed in 13.22 secs fish external usr time 19.59 secs 328.00 micros 19.59 secs sys time 4.03 secs 10.00 micros 4.03 secs Time output is with fish shell. make clean was ran before both attempts. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libubox: update to version 2020-07-11Petr Štetiar2020-07-111-3/+3
| | | | | | | | | f4e9bf73ac5c examples/lua: attempt to highlight some traps 53b9a2123fc6 lua/uloop: fd_add: use absolute indices for arguments c0941d3289fc lua/uloop: make get_sock_fd capable of absolute addresses 161c25960ba2 lua/uloop: fd_add() better args checking Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: kernel: fix awake-rt305x-dwc2 patchAlexey Dobrovolsky2020-07-111-7/+7
| | | | | | | | | | | | | At this point in v5.4 kernel we cannot use dwc2_readl() and dwc2_writel() since they rely on the value hsotg->needs_byte_swap which cannot be obtained before the controller wakes up. We should use readl() and writel() to wake up the controller before calling dwc2_check_core_endianness(). Fixes: 6be0da90a165 ("ramips: refresh patches") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [fixed Fixes: tag] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-firmware: package EIP197 mini firmwareTomasz Maciej Nowak2020-07-112-4/+15
| | | | | | | | | | | | | Quoting part of original message from eefb5f741015 commit in linux-firmware repository: This adds the "minifw" version of the EIP197 firmware, which the inside- secure driver will use as a fallback if the original full-featured firmware cannot be found. This allows for using the inside-secure driver and hardware without access to "official" firmware only available under NDA. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* firmware-utils: mkfwimage: fix memcpy and strncpy usagePetr Štetiar2020-07-113-16/+28
| | | | | | | | | | | | | | Firmware is binary blob, so there are barely any NULL terminated strings expected, so we should probably convert all chars into u8 types, and after that it's clear, that using strcpy doesn't make sense anymore. This is rather theoretical stuff, but `uint8_t name[PART_NAME_LENGTH]` means, that you can supply PART_NAME_LENGTH sized name, not PART_NAME_LENGTH-1 name when NULL terminated. Ref: https://github.com/openwrt/openwrt/pull/2274 Fixes: 04cb651376f9 ("firmware-utils: mkfwimage: fix more errors reported by gcc-6/7/9") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain/gcc: Add GCC 10.1.0 patchesSyrone Wong2020-07-1113-34/+34
| | | | | | | | | | | | | | | Compared to GCC 9: 870-ppc_no_crtsavres.patch changes moved to another file following upstream 881-no_tm_section.patch keep the tm section disabled patches refreshed to apply cleanly See https://gcc.gnu.org/gcc-10/porting_to.html for more info Compiled and run tested on x86_64 Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* toolchain/gcc: Add GCC 10.1.0 configSyrone Wong2020-07-113-0/+12
| | | | | | | | Add needed config changes and tarball hash for new GCC version. Signed-off-by: Syrone Wong <wong.syrone@gmail.com> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain/gcc: Copy patches from 9.3.0 to 10.1.0Syrone Wong2020-07-1118-0/+839
| | | | | | No content changes in this commit Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
* kirkwood: add support for Check Point L-50Pawel Dembicki2020-07-118-0/+590
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6281 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Known issues: -DSL not supported -Expresscard not tested Installation: Step one -> backup: make backup u-boot and env for revert stock posibility make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr Step two -> Use kwboot tool to upload openwrt u-boot to RAM: run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t" end start u-boot Step three -> Restore macs (e.g. below): setenv eth1addr 00:1C:XX:XX:XX:6C setenv ethaddr 00:1C:XX:XX:XX:6B setenv lan1_mac_addr 00:1C:XX:XX:XX:6C setenv lan2_mac_addr 00:1C:XX:XX:XX:6D setenv lan3_mac_addr 00:1C:XX:XX:XX:6E setenv lan4_mac_addr 00:1C:XX:XX:XX:6F setenv lan5_mac_addr 00:1C:XX:XX:XX:70 setenv lan6_mac_addr 00:1C:XX:XX:XX:71 setenv lan7_mac_addr 00:1C:XX:XX:XX:72 setenv lan8_mac_addr 00:1C:XX:XX:XX:73 setenv dmz_mac_addr 00:1C:XX:XX:XX:74 setenv dsl_mac_addr 00:1C:XX:XX:XX:75 Step four -> flash u-boot: mw 0x0800000 0xffff 0x100000 nand erase 0x0 100000 tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb nand write 0x0800000 0x0 0x100000 saveenv Step five -> run initramfs image: tftpboot 0x02000000 openwrt.bin; bootm 0x02000000; Step six -> install sysupgrade OpenWrt image: copy to /tmp/ sysupgrade image run sysupgrade Back to stock: Restore original u-boot end env. Install factory image via stock u-boot. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-kirkwood: add uboot for CheckPoint L-50Pawel Dembicki2020-07-115-2/+1078
| | | | | | This patch add u-boot for CheckPoint L-50 routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: add package for Seiko S-35390A I2C RTCPawel Dembicki2020-07-111-0/+17
| | | | | | This patch adds kernel package for Seiko Instruments S-35390A. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-envtools: ath79: update ubootenv partion index for gl-ar300mHuangbin Zhan2020-07-111-4/+8
| | | | | | | The block index of u-boot-env changed from mtd1 to mtd3 after upgrading kernel to 5.4. This patch search the mtd block by label name, work as expect when perform a clean flash. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* kernel: bump 5.4 to 5.4.51John Audia2020-07-115-69/+8
| | | | | | | | | | | | | | | | | | | | | update via update_kernel.sh -v -u 5.4 Removed upstreamed patches: 350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch Script refreshed patches: 902-debloat_proc.patch 904-debloat_dma_buf.patch Attempted merge conflict in following patches: 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch Build system: x86_64 Build tested: ipq806x (Netgear R7800) Signed-off-by: John Audia <graysky@archlinux.us> [fixed sha256sum of the tarball] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq806x: enable Linksys EA8500 eth1 interfacePawel Dembicki2020-07-113-1/+3
| | | | | | | | | | | | | At this moment Linksys EA8500 uses only eth0. This patch change switch registers, which allow to use eth1 as lan and eth0 as wan. The method work with similar Linksys EA7500V1 and it work with EA8500. Suggested-by: Sungbo Eo <mans0n@gorani.run> Tested-by: Brian Onn <brian.a.onn@gmail.com> Tested-by: Adrian Panella <ianchi74@outlook.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* base-files: remove useless catAdrian Schmutzler2020-07-111-1/+1
| | | | | | Check file contents directly instead of using cat. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wireguard-tools: replace backticks by $(...)Adrian Schmutzler2020-07-111-4/+4
| | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: replace backticks by $(...)Adrian Schmutzler2020-07-114-11/+11
| | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. This does not touch lib/upgrade/nand.sh, as there replacement is not trivial. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: fix yet another build issue, this time with capabilitiesDaniel Golle2020-07-111-3/+3
| | | | | | | 3034eaf jail: use linux/capability.h instead of sys/capability.h Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: fix another seccomp-related build issueDaniel Golle2020-07-111-3/+3
| | | | | | | 3473671 ujail: add dependency on syscall-names-h Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: disable TP-Link TL-WR941ND v2Adrian Schmutzler2020-07-111-1/+1
| | | | | | | | | | | | | The support for this device's Marvell MV88E6060 switch has been reported to be broken with kernels 4.19/5.4 (see bug report). Since this a 4/32 device and it has been confirmed to be working with stable 19.07 release (kernel 4.14), and since fixing it does not seem trivial, let's just disable it in master. Fixes: FS#2524 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: jail: fix build on platforms without seccomp supportDaniel Golle2020-07-111-3/+3
| | | | | Fixes: b6e440a0f5 ("procd: update to git HEAD") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-07-102-3/+41
| | | | | | | ea7a790 jail: add support for running OCI bundle bb4a446 uxc: add container management CLI tool Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: define RF5592 in init_eeprom routineDaniel Golle2020-07-103-3/+54
| | | | | | | | | | | Make sure RF5592 is set for RT5592 chip which apparently sometimes doesn't have RF defined (but always comes with RF5592). This patch was originally submitted on linux-wireless by Tom Psyborg <pozega.tomislav@gmail.com> but got rejected. Turns out the patch is actually needed. Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for Netgear R6020Tim Thorpe2020-07-104-0/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Netgear R6020, aka Netgear AC750. The R6020 appears to be the same hardware as the Netgear R6080, aka Netgear AC1000, but it has a slightly different flash layout, and no USB ports. Specification: SoC: MediaTek MT7628 (580 MHz) Flash: 8 MiB RAM: 64 MiB Wireless: 2.4Ghz (builtin) and 5Ghz (MT7612E) LAN speed: 10/100 LAN ports: 4 WAN speed: 10/100 WAN ports: 1 UART (57600 8N1) on PCB MAC addresses based on vendor firmware: LAN *:88 0x4 WAN *:89 WLAN2 *:88 0x4 WLAN5 *:8a 0x8004 The factory partition might have been corrupted beforehand. However, the comparison of vendor firmware and OpenWrt still allowed to retrieve a meaningful assignment that also matches the other similar devices. Installation: Flashing OpenWRT from stock firmware requires nmrpflash. Use an ethernet cable to connect to LAN port 1 of the R6020, and power the R6020 off. From the connected workstation, run `nmrpflash -i eth0 -f openwrt-ramips-mt76x8-netgear_r6020-squashfs-factory.img`, replacing eth0 with the appropriate interface (can be identified by running `nmrpflash -L`). Then power on the R6020. After flashing has finished, power cycle the R6020, and it will boot into OpenWRT. Once OpenWRT has been installed, subsequent flashes can use the web interface and sysupgrade files. Signed-off-by: Tim Thorpe <timfthorpe@gmail.com> [slightly extend commit message, fix whitespaces in DTS, align From: with Signed-off-by] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: set correct gphy pins for Zyxel P-2812Willem van den Akker2020-07-102-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This fixes the gphy LED pins for Zyxel P-2812 devices. The have been accidentally altered during a tidy-up operation (see Fixes: below). No ports were available, dmesg reported: [ 0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by 1e100bb0.stp; cannot claim for 1e108000.eth [ 0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22 [ 0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting, reverse things back [ 0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22 Fixes: FS#3188 Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the Ethernet controller node") Suggested-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Willem van den Akker <wvdakker@wilsoft.nl> [commit message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: fix bashism in gen_banana_pi_img.shDavid Woodhouse2020-07-091-1/+1
| | | | | | | | There was a bashism in the script. This fixes the script so that it doesn't actually require bash, and can be run with any POSIX shell as its shebang suggests. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* kernel: iscsi-initator: fix kernel config symbolsLucian Cristian2020-07-091-2/+2
| | | | | | | | | | | | | | | Enable SCSI low-level drivers on targets that don't have it already in order to fix following build failures on few platforms: .config:4739:warning: symbol value 'm' invalid for SCSI_LOWLEVEL * Restart config... * SCSI low-level drivers SCSI low-level drivers (SCSI_LOWLEVEL) [Y/n] (NEW) aborted! Fixes: b88f8202c4ce ("kernel: add iscsi-initator support") Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [commit subject and description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: re-add u3phy2 phy-switch patchSungbo Eo2020-07-091-0/+66
| | | | | | | | | This patch is required for pcie@2,0 in mt7623 to work. The patch was originally added in kernel 4.14, but it has not been ported to 4.19 and later. Fixes: FS#3217 Tested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* mediatek: do not create device nodes in uci-defaults scriptSungbo Eo2020-07-091-16/+5
| | | | | | | | | Since commit 298814e6be76 ("base-files: config_generate: split macaddr with multiple ifaces") uci MAC address setup will create a device node for each member iface. But this script might override the device nodes and interfere with the MAC address setup. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:43:26 +0000