aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.39Petr Štetiar2020-05-075-25/+22
| | | | | | | | | Refreshed patches. Run tested: qemu-x86-64 Build tested: x86/64, imx6, sunxi/a53, layerscape/armv7+armv8_64b Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireguard: bump to 1.0.20200506Jason A. Donenfeld2020-05-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * compat: timeconst.h is a generated artifact Before we were trying to check for timeconst.h by looking in the kernel source directory. This isn't quite correct on configurations in which the object directory is separate from the kernel source directory, for example when using O="elsewhere" as a make option when building the kernel. The correct fix is to use $(CURDIR), which should point to where we want. * compat: use bash instead of bc for HZ-->USEC calculation This should make packaging somewhat easier, as bash is generally already available (at least for dkms), whereas bc isn't provided by distros by default in their build meta packages. * socket: remove errant restriction on looping to self It's already possible to create two different interfaces and loop packets between them. This has always been possible with tunnels in the kernel, and isn't specific to wireguard. Therefore, the networking stack already needs to deal with that. At the very least, the packet winds up exceeding the MTU and is discarded at that point. So, since this is already something that happens, there's no need to forbid the not very exceptional case of routing a packet back to the same interface; this loop is no different than others, and we shouldn't special case it, but rather rely on generic handling of loops in general. This also makes it easier to do interesting things with wireguard such as onion routing. At the same time, we add a selftest for this, ensuring that both onion routing works and infinite routing loops do not crash the kernel. We also add a test case for wireguard interfaces nesting packets and sending traffic between each other, as well as the loop in this case too. We make sure to send some throughput-heavy traffic for this use case, to stress out any possible recursion issues with the locks around workqueues. * send: cond_resched() when processing tx ringbuffers Users with pathological hardware reported CPU stalls on CONFIG_ PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning these workers would never terminate. That turned out not to be okay on systems without forced preemption. This commit adds a cond_resched() to the bottom of each loop iteration, so that these workers don't hog the core. We don't do this on encryption/decryption because the compat module here uses simd_relax, which already includes a call to schedule in preempt_enable. * selftests: initalize ipv6 members to NULL to squelch clang warning This fixes a worthless warning from clang. * send/receive: use explicit unlikely branch instead of implicit coalescing Some code readibility cleanups. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ppp: Fix mirror hashHauke Mehrtens2020-05-061-1/+1
| | | | | Fixes: ae06a650d680 ("ppp: update to version 2.4.8.git-2020-03-21") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* fstools: update to the latest versionRafał Miłecki2020-05-061-3/+3
| | | | | | | | | eec16e2 blockd: add optional "device" parameter to "info" ubus method 9ab936d block(d): always call hotplug.d "mount" scripts from blockd 4963db4 blockd: use uloop_process for calling /sbin/hotplug-call mount cddd902 Truncate FAT filesystem label until 1st occurance of a blank (0x20) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: fix unknown packet flooding for ar8229/ar8236Chuanhong Guo2020-05-062-7/+16
| | | | | | | | | | | | ar8229 and ar8236 don't allow unknown unicast/multicast frames and broadcast frames to be flooded to cpu port. This isn't desired behavior for swconfig as we treat it as a standalone switch. Current code doesn't enable unicast frame flooding for ar8229 and uses wrong setup for ar8236. This commit fixes both of them by enabling port 0 flooding for all unknown frames. Fixes: FS#2848 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* buildsystem: add CPE information to ipkg packages and manifest filesFlorian Eckert2020-05-051-0/+1
| | | | | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. This information already exists in some makefiles. In order for the information to be processed further, it should also be added to the manifest file and the control file of ipkg packages. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* sunxi: remove unneeded shebang for preinit filesAdrian Schmutzler2020-05-052-3/+0
| | | | | | | preinit files are sourced and they have no execute bit set, so remove their shebang. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: tidy up cases in base-filesAdrian Schmutzler2020-05-052-9/+9
| | | | | | | This removes unnecessary quotes in cases and applies alphabetic order to members. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* fstools: update to the latest versionRafał Miłecki2020-05-051-3/+3
| | | | | | | | | | 8b9e601 block: always use st_dev (device ID) of / when looking for root 37c9148 block: simplify check_extroot() a bit d70774d block: add some basic extroot documentation 32db27d Revert "block: support hierarchical mount/umount" 0b93429 Revert "block: mount_action: handle mount/umount deps" Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* odhcpd: update to latest git HEAD (FS#3056)Hans Dedecker2020-05-041-3/+3
| | | | | | 5ce0770 router: fix Lan host reachibility due to identical RIO and PIO prefixes (FS#3056) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: bump 5.4 to 5.4.38Petr Štetiar2020-05-047-14/+14
| | | | | | | | | Refreshed patches. Run tested: qemu-x86-64, apalis Build tested: x86/64, ipq40xx, ath79, imx6, sunxi/a53 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mediatek: add ubootJohn Crispin2020-05-045-0/+9876
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: fix image buildingJohn Crispin2020-05-044-24/+8
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: update patchesJohn Crispin2020-05-043-19/+125
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: more wifi reconf related fixesJohn Crispin2020-05-041-18/+24
| | | | | | | | | | | * uci state was not getting reset properly during teardown * AP+STA co-exist state was not flushed properly upon channel switch * remove a debug logger call * properly teardown supplicant instances when they get disabled * add md5 config support for supplicant * don't call wpa_supplicant_prepare_interface twice Signed-off-by: John Crispin <john@phrozen.org>
* curl: update to version 7.70.0Josef Schlehofer2020-05-042-9/+9
| | | | | | | | | - Release notes: https://curl.haxx.se/changes.html#7_70_0 - Refreshed patch Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* argp-standalone: fix segfault in canon_doc_optionStijn Tintel2020-05-031-0/+14
| | | | | | Backported from glibc. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: backup /boot/cmdline.txt and restore earlyStijn Tintel2020-05-032-1/+2
| | | | | | | | | | | | If you want to use the Raspberry Pi UART, "console=serial0,115200" needs to be removed from the kernel cmdline. This is done by editing /boot/cmdline.txt. However, this file is not currently backed up during sysupgrade, so this effectively breaks HATs that require the use of the UART every sysupgrade. Backup this file during sysupgrade, and restore it before rebooting. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* base-files: generate config files with correct permissionsHans Dedecker2020-04-301-0/+2
| | | | | | | As touch creates files with permission 0644 use umask to create config files with permission 0600 to be inline with INSTALL_CONF Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uci: update to latest git HEADHans Dedecker2020-04-301-3/+3
| | | | | | ec8d323 file: preserve original file mode after commit Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 1.0.20200429Jason A. Donenfeld2020-04-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * compat: support latest suse 15.1 and 15.2 * compat: support RHEL 7.8's faulty siphash backport * compat: error out if bc is missing * compat: backport hsiphash_1u32 for tests We now have improved support for RHEL 7.8, SUSE 15.[12], and Ubuntu 16.04. * compat: include sch_generic.h header for skb_reset_tc A fix for a compiler error on kernels with weird configs. * compat: import latest fixes for ptr_ring * compat: don't assume READ_ONCE barriers on old kernels * compat: kvmalloc_array is not required anyway ptr_ring.h from upstream was imported, with compat modifications, to our compat layer, to receive the latest fixes. * compat: prefix icmp[v6]_ndo_send with __compat Some distros that backported icmp[v6]_ndo_send still try to build the compat module in some corner case circumstances, resulting in errors. Work around this with the usual __compat games. * compat: ip6_dst_lookup_flow was backported to 3.16.83 * compat: ip6_dst_lookup_flow was backported to 4.19.119 Greg and Ben backported the ip6_dst_lookup_flow patches to stable kernels, causing breaking in our compat module, which these changes fix. * git: add gitattributes so tarball doesn't have gitignore files Distros won't need to clean this up manually now. * crypto: do not export symbols These don't do anything and only increased file size. * queueing: cleanup ptr_ring in error path of packet_queue_init Sultan Alsawaf reported a memory leak on an error path. * main: mark as in-tree Now that we're upstream, there's no need to set the taint flag. * receive: use tunnel helpers for decapsulating ECN markings ECN markings are now decapsulated using RFC6040 instead of the old RFC3168. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: bump 5.4 to 5.4.36Petr Štetiar2020-04-3021-157/+51
| | | | | | | | | | | | | | | Refreshed patches, removed upstreamed patch: generic/hack: 551-loop-Better-discard-support-for-block-devices.patch Added generic config symbol `ARM64_ERRATUM_1542419` due to Fixes: f2791551cedb ("arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419"). Run tested: qemu-x86-64, apalis, nbg6617 Build tested: x86/64, imx6, ipq40xx, sunxi/a53 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: bump to latest release 2020-04-29Petr Štetiar2020-04-305-994/+2
| | | | | | Update to latest release. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-ct: update to version 2020-04-29Petr Štetiar2020-04-301-3/+3
| | | | | | | | | | | | | | | | Pulls in workaround for TX rate code firmware bug which might as well help track it down via different printk()s and thus possibly provide more clue for proper fix. Firmware currently sends wrong (0xff) TX rate code which causes WARN_ONCE, so the workaround just changes this bogus value (0xff) into 0. For 5.4 it also pulls in tx-queue-wake throttling patch "ath10k: Restart xmit queues below low-water mark", which should improve performance with high number of concurrent TCP streams. Ref: https://github.com/greearb/ath10k-ct/pull/129 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* dnsmasq: always inform about disabled dhcp servicePetr Štetiar2020-04-301-6/+6
| | | | | | | | | | | | | | | | | Init script checks for an already active DHCP server on the interface and if such DHCP server is found, then it logs "refusing to start DHCP" message, starts dnsmasq without DHCP service unless `option force 1` is set and caches the DHCP server check result. Each consecutive service start then uses this cached DHCP server check result, but doesn't provide log feedback about disabled DHCP service anymore. So this patch ensures, that the log message about disabled DHCP service on particular interface is always provided. Acked-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: fix dts of Teltonika RUT9xx devicesDaniel Golle2020-04-292-2/+2
| | | | | | The previous commits were missing a semicolon. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for Teltonika RUT955 H7V3C0Daniel Golle2020-04-295-1/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board was previously supported in ar71xx as 'RUT9XX'. The difference between that and the other RUT955 board already supported in ath79 is that instead of the SPI shift registers driving the LEDs and digital outputs that model got an I2C GPIO expander instead. To support LEDs during early boot and interrupt-driven digital inputs, I2C support as well as support for PCA953x has to be built-in and cannot be kernel modules, hence select those symbols for ath79/generic. Specification: - 550/400/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1 - 2T2R 2,4 GHz (AR9344) - built-in 4G/3G module (example: Quectel EC-25EU) - internal microSD slot (spi-mmc, buggy and disabled for now) - RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0) - RS422/RS485 (AR934x high speed UART, /dev/ttyATH1) - analog 0-24V input (MCP3221) - various digital inputs and outputs incl. a relay - 11x LED (4 are driven by AR9344, 7 by PCA9539) - 2x miniSIM slot (can be swapped via GPIO) - 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS) - 1x button (reset) - DC jack for main power input (9-30 V) - debugging UART available on PCB edge connector Serial console (/dev/ttyS0) pinout: - RX: pin1 (square) on top side of the main PCB (AR9344 is on top) - TX: pin1 (square) on bottom side Flash instruction: Vendor firmware is based on OpenWrt CC release. Use the "factory" image directly in GUI (make sure to uncheck "keep settings") or in U-Boot web based recovery. To avoid any problems, make sure to first update vendor firmware to latest version - "factory" image was successfully tested on device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.1". Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: split Teltonika RUT955 to support other RUT9xx modelsDaniel Golle2020-04-292-171/+198
| | | | | | | | | Split device-tree of Teltonika RUT955 into a generic RUT9xx part and a part specific to that version of RUT955 already supported. Also harmonize GPIO and LED names with what is used by the vendor firmware and assign RS485 DTR signal. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ugps: nmea: fix time comparisionDaniel Golle2020-04-291-4/+4
| | | | | | | Fix bug causing system time to be set over and over again, and causing massive log pollution. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kirkwood: disable image for Linksys EA3500 (Audi)Adrian Schmutzler2020-04-291-0/+1
| | | | | | | | | | | Due to the switch to DSA, the kernel image has become too big (2641k) for the kernel partition (2624k) on this device: WARNING: Image file [...]/linux-kirkwood/linksys_audi-uImage is too big Disable the device until this is fixed, so buildbots can continue their work. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: hwmon: add Analog Devices AD741x supportDavid Bauer2020-04-291-0/+14
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* build: prereq: change minimum make version to 3.82Kevin Darbyshire-Bryant2020-04-291-2/+2
| | | | | | | undefine was added in make 3.82 which is now some 10 years ago, some make scripts are beginning to use 'undefine' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: add SUPPORTED_DEVICES based on ar71xx for some devicesAdrian Schmutzler2020-04-282-0/+13
| | | | | | | | | This adds some still-missing board names for old TP-Link devices to ath79 SUPPORTED_DEVICES. Fixes: FS#3017 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* Revert "ramips: explicitly disable built-in switch for lan-only devices"Adrian Schmutzler2020-04-282-4/+0
| | | | | | | | | This reverts commit a1693bf626f8cd00363b0b98642b682522dfcf75. The rt288x and rt3883 devices in question don't have switches. Only keep the merged case for rt305x. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: remove support for kernel 4.19Adrian Schmutzler2020-04-2817-1759/+0
| | | | | | | | | | kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19 support broken on the affected devices. Support on kernel 5.4 seems to have been running fine for almost 2 months on multiple devices, while support for 4.19 has never left testing state. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: remove support for kernel 4.14Adrian Schmutzler2020-04-2818-1818/+0
| | | | | | | | | | kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19 support broken on the affected devices. Support on kernel 5.4 seems to have been running fine for almost 2 months on multiple devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: switch from swconfig to dsaPawel Dembicki2020-04-286-69/+68
| | | | | | | | | | | | | | | | | | | | | | This patch removes support for swconfig and switches to dsa driver. swconfig and switch drivers are removed. DSA driver is enabled and configuration is adjusted. In kirkwood only two devices have switches: Linksys EA3500 and EA4500. WAN MAC configuration in 02_network is required because otherwise WAN would have the same MAC address as lan interfaces. In swconfig solution the WAN address was assigned in u-Boot to eth1. Now, as eth1 is disabled and wan is part of the switch, we have to set it manually. Compile tested: EA3500, EA4500 Run tested: EA4500 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [minor commit title/message adjustments, remove swconfig package for devices] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wpad-wolfssl: fix crypto_bignum_sub()Antonio Quartulli2020-04-281-0/+26
| | | | | | | | | | | | | | Backport patch from hostapd.git master that fixes copy/paste error in crypto_bignum_sub() in crypto_wolfssl.c. This missing fix was discovered while testing SAE over a mesh interface. With this fix applied and wolfssl >3.14.4 mesh+SAE works fine with wpad-mesh-wolfssl. Cc: Sean Parkinson <sean@wolfssl.com> Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix MikroTik 750Gr3 ports MAC addressesDENG Qingfang2020-04-282-4/+9
| | | | | | | | | | | | | | | According to a user in OpenWrt forum, on RouterOS the MAC addresses are ether1(WAN) = MAC ether2(LAN2) = MAC+1 ether3(LAN3) = MAC+2 etc. Fix the MAC addresses in OpenWrt. Ref: https://forum.openwrt.org/t/few-dumb-question-about-mt7530-rb750gr3-dsa/61608 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [remove label_mac in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath10k-ct-firmware: add htt-mgt variantsÁlvaro Fernández Rojas2020-04-281-1/+154
| | | | | | | | | | | For wave-2, there is now a new variant: htt-mgt-community (vs the old full-htt-mgt-community). The non-full one (hence forth 'diet') compiles out a lot of firmware features that ath10k does not use. This saves a lot of resources and lets one configure more stations/vdevs/etc using fwcfg. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: update firmware imagesÁlvaro Fernández Rojas2020-04-281-26/+26
| | | | | | No release notes this time. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: rename ct-htt packagesÁlvaro Fernández Rojas2020-04-282-66/+66
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: move CT firmwares to new packageÁlvaro Fernández Rojas2020-04-282-446/+524
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct: remove old patchesÁlvaro Fernández Rojas2020-04-2813-2300/+651
| | | | | | Only keep 5.4 patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* elfutils: powerpc build fixLuiz Angelo Daros de Luca2020-04-281-0/+34
| | | | | | | | | | | | | | Fixes following build error on mpc85xx/generic: ppc_initreg.c: In function 'ppc_set_initial_registers_tid': ppc_initreg.c:79:22: error: field 'r' has incomplete type struct pt_regs r; Ref: FS#2924 Fixes: d27623b54254 ("elfutils: update to 0.179") Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> [commit description facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* wireless-regdb: backport three upstream fixesPetr Štetiar2020-04-284-0/+935
| | | | | | | | Another release is overdue for quite some time, so I'm backporting three fixes from upstream which I plan to backport into 19.07 as well. Ref: FS#2880 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* omap: remove support for kernel 4.14Andre Heider2020-04-281-740/+0
| | | | | | There's support for 5.4 and 4.19 now, remove the 3rd option. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch to kernel 5.4Andre Heider2020-04-281-1/+1
| | | | | | | | Runtime tested on beagleblack. Signed-off-by: Andre Heider <a.heider@gmail.com> [added test comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* omap: make kernel_oldconfigAndre Heider2020-04-281-56/+52
| | | | | | Attempt to keep the same nand/sound/panel functionality using new knobs. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: copy kernel 4.19 config for 5.4Andre Heider2020-04-281-0/+763
| | | | Signed-off-by: Andre Heider <a.heider@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 09:07:18 +0000