aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* bpftools: drop unneeded libintl linking for NLSTony Ambardar2021-04-101-5/+1
| | | | | | | | | There is no direct linking of libintl from bpftools, only secondary linking through libelf, so remove "-lintl" from TARGET_LDFLAGS. Fixes: 5582fbd6135f ("bpftools: support NLS, fix ppc build and update to 5.8.9") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit c8c638a19b63bf6c3bf8094aebd8fde6feda36ba)
* iproute2: separate tc into tiny and full variantsTony Ambardar2021-04-101-27/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change was investigated previously [1] but not deemed necessary. With the recent addition [2] of modern BPF loader support, however, tc gained dependencies on libelf and libbpf, with a larger installation footprint. Similar to ip-tiny/ip-full, split tc into tc-full and tc-tiny variants, where the latter excludes the eBPF loader, uses a smaller executable, and avoids libelf and libbpf package dependencies. Both variants provide the 'tc' virtual package, with tc-tiny as the default. The previous tc package included a loadable module for iptables actions. Separate this out into a common package, tc-mod-iptables, which both variants depend on. Some package sizes on mips_24kc: Before: 148343 tc_5.11.0-1_mips_24kc.ipk After: 144833 tc-full_5.11.0-2_mips_24kc.ipk 138430 tc-tiny_5.11.0-2_mips_24kc.ipk (and no libelf or libbpf) 4115 tc-mod-iptables_5.11.0-2_mips_24kc.ipk Also fix up some Makefile indentation. [1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447619962 [2] b048a305a3d3 ("iproute2: update to 5.11.0") Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 72885e9608d9c0fa06abce6bdb6dd054c2116eb7)
* kernel/modules: relocate teql hotplug from iproute2 to kmod-schedTony Ambardar2021-04-103-2/+7
| | | | | | | | | | | | | | | The link equalizer sch_teql.ko of package kmod-sched relies on a hotplug script historically included in iproute2's tc package. In previous discussion [1], consensus was the hotplug script is best located together with the module in kmod-sched, but this change was deferred at the time. Relocate the hotplug script now. This change also simplifies adding a tc variant for minimal size with reduced functionality. [1] https://github.com/openwrt/openwrt/pull/1627#issuecomment-447923636 Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 863ce4f15f74a674f01ab47f445b362c113b113b)
* iproute2: add missing limits.h includesTony Ambardar2021-04-101-0/+45
| | | | | | | | | | | | | | | | This patch has been submitted upstream to fix an error reported by a few users. One instance seen using gcc 10.2.0, binutils 2.35.1 and musl 1.1.24: bpf_glue.c: In function 'get_libbpf_version': bpf_glue.c:46:11: error: 'PATH_MAX' undeclared (first use in this function); did you mean 'AF_MAX'? 46 | char buf[PATH_MAX], *s; | ^~~~~~~~ | AF_MAX Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 10ffefe60299637bc592ec4ef0dde93e0e2e8344)
* iproute2: update to 5.11.0Tony Ambardar2021-04-1011-29/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest iproute2 version brings various improvements and fixes: https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/log/?qt=range&q=v5.10.0..v5.11.0 In particular, ip and tc now use libbpf as the standard way to load BPF programs, rather than the old, limited custom loader. This allows more consistent and featureful BPF program handling e.g. support for global initialized variables. Also fix a longstanding problem with iproute2 builds where unneeded DSO dependencies are added to most utilities, bloating their installation footprint. From research and testing, explicitly using a "--as-needed" linker flag avoids the issue. Update accordingly and drop extra package dependencies from Makefile. Additional build and packaging updates include: - install missing development header to iproute2/bpf_elf.h - propagate OpenWrt verbose flag during build - update and refresh patches Compile and run tested: QEMU/malta-mips32be on kernels 5.4 & 5.10. All iproute2 packages were built and installed to the test image. Some regression testing using ip-full and tc was successfully performed to exercise several kmods, tc modules, and simple BPF programs. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit b048a305a3d3cbb5375e32757e70aa129b4c7c4f)
* wireguard-tools: depend on kmod-wireguardIlya Lipnitskiy2021-04-101-1/+4
| | | | | | | | | | | | | | | | To the vast majority of the users, wireguard-tools are not useful without the underlying kernel module. The cornercase of only generating keys and not using the secure tunnel is something that won't be done on an embedded OpenWrt system often. On the other hand, maintaining a separate meta-package only for this use case introduces extra complexity. WireGuard changes for Linux 5.10 remove the meta-package. So let's make wireguard-tools depend on kmod-wireguard to make WireGuard easier to use without having to install multiple packages. Fixes: ea980fb9 ("wireguard: bump to 20191226") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit cbcddc9f318607881799e329b327a68c4e76d5cb)
* kernel: fix kmod-wireguard package fieldsIlya Lipnitskiy2021-04-101-4/+2
| | | | | | | | | | Use NETWORK_SUPPORT_MENU like all other modules in netsupport.mk. Drop SECTION and CATEGORY fields as they are set by default and to match other packages in netsupport.mk. Use better TITLE for kmod-wireguard (taken from upstream drivers/net/Kconfig). Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 0b53d6f7fa8cc35cec5b22e1c64a2407fab6dfe3)
* wireguard-tools: bump to 1.0.20210223Jason A. Donenfeld2021-04-101-2/+2
| | | | | | | Simple version bump with accumulated fixes. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit e0f7f5bbce0d03e5192b5dad5a24fcb8566da97f)
* kernel: migrate wireguard into the kernel treeIlya Lipnitskiy2021-04-103-89/+184
| | | | | | | | | | | | On Linux 5.4, build WireGuard from backports. Linux 5.10 contains wireguard in-tree. Add in-kernel crypto libraries required by WireGuard along with arch-specific optimizations. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 06351f1bd0455abacb700db5098bb798f66948fc) (cherry picked from commit 464451d9ab824c2ed62f7da33f0a965f562714c8)
* kernel: 5.4: import wireguard backportJason A. Donenfeld2021-04-10132-32/+63296
| | | | | | | | | | | | | | | | | | | | | | | | | | Rather than using the clunky, old, slower wireguard-linux-compat out of tree module, this commit does a patch-by-patch backport of upstream's wireguard to 5.4. This specific backport is in widespread use, being part of SUSE's enterprise kernel, Oracle's enterprise kernel, Google's Android kernel, Gentoo's distro kernel, and probably more I've forgotten about. It's definately the "more proper" way of adding wireguard to a kernel than the ugly compat.h hell of the wireguard-linux-compat repo. And most importantly for OpenWRT, it allows using the same module configuration code for 5.10 as for 5.4, with no need for bifurcation. These patches are from the backport tree which is maintained in the open here: https://git.zx2c4.com/wireguard-linux/log/?h=backport-5.4.y I'll be sending PRs to update this as needed. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit 3888fa78802354ab7bbd19b7d061fd80a16ce06b) (cherry picked from commit d54072587146dd0db9bb52b513234d944edabda3) (cherry picked from commit 196f3d586f11d96ba4ab60068cfb12420bcd20fd) (cherry picked from commit 3500fd7938a6d0c0e320295f0aa2fa34b1ebc08d) (cherry picked from commit 23b801d3ba57e34cc609ea40982c7fbed08164e9) (cherry picked from commit 0c0cb97da7f5cc06919449131dd57ed805f8f78d) (cherry picked from commit 2a27f6f90a430342cdbe84806e8b10acff446a2d) Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* zynq: Enable CONFIG_KERNEL_MODE_NEONIlya Lipnitskiy2021-04-101-1/+0
| | | | | | | | | This flag is set on all other platforms. And Zynq 7000 SoC does have NEON support: https://www.xilinx.com/support/documentation/application_notes/xapp1206-boost-sw-performance-zynq7soc-w-neon.pdf Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 7d00f632b7b245bcf25783797308325aa255b020)
* bcm4908: enable Netgear R8000P bootloader imageRafał Miłecki2021-04-081-2/+2
| | | | | | | | | | | | | | | | | | | This enables building BCM4908 "raw" image that can be flashed using bootloader web UI. It requires serial console access & stopping booting by the "Press any key to stop auto run". It's easy to build vendor like CHK image but it can't be safely flashed using vendor UI at this point. Netgear implements method called "NAND incremental flashing" that doesn't seem to flash bootfs partition as provided. Above method seems to update vmlinux.lz without updating 94908.dtb. It prevents OpenWrt kernel from booting due to incomplete DTB file. Full Netgear R8000P support can be enabled after finding a way to make vendor firmware flash OpenWrt firmware including the 94908.dtb update. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d92a9c97bf3700e90af1d3c9157502af660365c0)
* bcm4908: enable target & Asus GT-AC5300 imageRafał Miłecki2021-04-082-1/+3
| | | | | | | | | | OpenWrt was succesfully tested on the GT-AC5300 model. It's possible to: 1. Install OpenWrt using vendor UI 2. Perform UBI aware sysupgrade 3. Install vendor firmware using OpenWrt sysupgrade Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5e78cb9b85a045f436abf6a03aa5c774d30e1090)
* firmware-utils: bcm4908img: convert into a packageRafał Miłecki2021-04-085-2/+62
| | | | | | | | | | | bcm4908img is a tool managing BCM4908 platform images. It's used for creating them as well as checking, modifying and extracting data from. It's required by both: host (for building firmware images) and target (for sysupgrade purposes). Make it a host/target package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9b4fc4cae9fa0cd0cd9060e1c9d33320c3249ced)
* firmware-utils: bcm4908img: fix uninitialized var usageRafał Miłecki2021-04-081-3/+7
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5a2086d230063b2f83a436ed37b0f6a92706bcb9)
* bcm4908: fix Netgear R8000P imageRafał Miłecki2021-04-081-2/+5
| | | | | | | Use vendor format to allow flashing using Negear UI. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f2c8c62d98f2137d8af896e56d5e29759cf48715)
* bcm4908: add sysupgrade supportRafał Miłecki2021-04-081-0/+213
| | | | | | | | | | | It supports flashing OpenWrt images (bootfs & UBI upgrade) as well as vendor images (whole MTD partition write). Upgrading cferom is unsupported. It requires copying device specific data (like MAC) to target image before flashing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a6a0b252baa6c19dfc62611ea910b56527ce4fa5)
* bcm4908: pad firmware image bootfs JFFS2 partition to 8 MiBRafał Miłecki2021-04-081-1/+1
| | | | | | | | | | This way MTD "bootfs" partition will be always 8+ MiB. This should be enough for any custom / future firmware to fit its bootfs (e.g. big kernel) without having to repertition whole flash. That way we can preserve UBI and its erase counters during sysupgrade. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ca9b1f15c424d68af0f372c37c8eee81b36ee7e1)
* firmware-utils: bcm4908img: extract bootfs without paddingRafał Miłecki2021-04-081-6/+27
| | | | | | | | | JFFS2 bootfs partition in a BCM4908 image usually includes some padding. For flashing it individually (writing to designed MTD partition) we want just JFFS2 data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ed7edf88e20c9dd0026e5c5629d8a6500d3e3f80)
* firmware-utils: bcm4908img: fix extracting cferomRafał Miłecki2021-04-081-1/+1
| | | | | | | Fix offset to extract proper data when image contains vendor header. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit dcbde11af181055f2d1c77ebc19f50c29bbab96e)
* firmware-utils: bcm4908img: support extracting bootfs & rootfsRafał Miłecki2021-04-081-0/+35
| | | | | | | | It's required for upgrading firmware using single partitions instead of just blindly writing whole image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e33957c241abf8f0dbf5f3713058d126fb4599b4)
* firmware-utils: bcm4908img: replace size with offsetRafał Miłecki2021-04-081-20/+35
| | | | | | | | It's much easier to operate on BCM4908 image data with absolute offset of each section stored. It doesn't require summing sizes over and over. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5314cab729b743d3b8b08db4e01c3095017f4e68)
* bcm4908: rename bootfs dummy file to the 1-openwrtRafał Miłecki2021-04-081-1/+1
| | | | | | | | | | | | | The purpose of that dummy file is to make CFE work properly with OpenWrt bootfs. CFE for some reason ignores JFFS2 files with ino 0. Rename it to 1-openwrt so: 1. It's consistent with bcm63xx 2. It's OpenWrt specific so sysupgrade can distinguish it from vendor images Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 880c8b44223c9cbce3dd14da78c33676c6f1a8a6)
* bcm4908: enable JFFS2 supportRafał Miłecki2021-04-081-1/+0
| | | | | | | It's needed for accessing JFFS2 bootfs partition. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 180c4635265b4907221a62b3068ac89447cd83d7)
* firmware-utils: bcm4908img: add bootfs supportRafał Miłecki2021-04-081-3/+337
| | | | | | | | | | | | | This adds support for accessing bootfs JFFS2 partition in the BCM4908 image. Support includes: 1. Listing files 2. Renaming file (requires unchanged name length) Above commands are useful for flashing BCM4908 images which by defualt come with cferom.000 file and require renaming it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ed847ef5f340dcae1556cbc6dfaa6657a5179be6)
* firmware-utils: bcm4908img: support extracting image dataRafał Miłecki2021-04-081-0/+87
| | | | | | | It's useful for upgrading cferom, firmware, etc. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9c039d56a154bb416492bf5657093576d50cc220)
* firmware-utils: bcm4908img: find cferom sizeRafał Miłecki2021-04-081-0/+31
| | | | | | | | It's important for modifying / extracting firmware content. cferom is optional image content at the file beginning. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6af45b842bd22633fa3ccd57edaf073a759525bb)
* firmware-utils: bcm4908img: use "info" command displaying file infoRafał Miłecki2021-04-081-11/+20
| | | | | | | | BCM4908 image format contains some info that may be useful for info / debugging purposes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9b9184f1782489163eb204f3b238de778ae1214b)
* firmware-utils: bcm4908img: support reading from stdinRafał Miłecki2021-04-081-8/+38
| | | | | | | | 1. Don't allow pipe stdin as we need to fseek() 2. Don't alow TTY as it doesn't make sense for binary input Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d533b27bc09eb5323a05ed44589235a86edcda0d)
* firmware-utils: bcm4908img: detect Netgear vendor firmwareRafał Miłecki2021-04-081-25/+33
| | | | | | | | | Netgear uses CHK header which needs to be skipped when validating BCM4908 image. Detect it directly in the bcm4908img tool. Dealing with binary structs and endianess is way simpler in C. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a39f85d8b66125f07c4bcbea46b296946de60dc7)
* firmware-utils: bcm4908img: extract parsing codeRafał Miłecki2021-04-081-37/+67
| | | | | | | | | Move code parsing existing firmware file to separated function. This cleans up existing code and allows reusing parsing code for other commands. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7d5f7439428d2b4c6952af47b36acc010b846372)
* bcm4908: backport DT patch adding Ethernet MAC addressRafał Miłecki2021-04-081-0/+82
| | | | | | | | This tells OS (Linux) where from MAC should be read (bootloader MTD partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1cc5eb45d5192b41d97d5da58c34353f4c3240f9)
* firmware-utils: bcm4908kernel: name struct fieldsRafał Miłecki2021-04-081-8/+8
| | | | | | | Less magic names / values. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a3611432a6c3490fb2b6fdbc1ce664cf70900668)
* kernel: create bootfs partition when parsing on BCM4908Rafał Miłecki2021-04-081-5/+9
| | | | | | | | | It's helpful for accessing booting data (DTS, kernel, etc.). It has to be used carefully as CFE's JFFS2 support is quite dumb. It doesn't recognize deleted files and has problems handling 0 inode. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6dd727ac24fa36ac3f23e9a5cf6781a7d1c6b797)
* firmware-utils: bcm4908img: name fields & valuesRafał Miłecki2021-04-081-8/+22
| | | | | | | Less magic numbers Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1ff7569387f69550e8a9356a109a875e4fdb4412)
* bcm4908: backport the latest bcm_sf2 commitsRafał Miłecki2021-04-086-111/+210
| | | | | | | | 1. CFP support for BCM4908 2. Upstream RGMII regs fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a49fd9db0a2bfad8ea9a09f32fadbd3cc7e46205)
* bcm4908: backport DTS patch with Ethernet TX IRQRafał Miłecki2021-04-082-1/+31
| | | | | | | It allows bcm4908_enet Linux driver to work more efficiently. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 13d9904acdd24e002aab3d6c3dd7879826b54008)
* bcm53xx: enhance support for Linksys EA9500Vivek Unune2021-04-084-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add leds and configs 2. Add network configs 3. Add script to clear partial boot flag 4. Hack to use port 5 as cpu port as port 8 connected to eth2 wont pass any frames 5. Enable EA9500 image generation Hardware Info: - Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz - Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 - DDR3 RAM - 256 MB - Flash - 128 MB (Toshiba TC58BVG0S3HTA00) - 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) - 5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch - Ports - 8 Ports, 1 WAN Ports - Antennas - 8 Antennas - Serial Port - @j6 [GND,TX,RX] (VCC NC) 115200 8n1 Flashing Instructions: 1. Connect a USB-TTL table to J6 on the router as well as a ethernet cable to a lan port and your PC. 2. Power-on the router. 3. Use putty or a serial port program to view the terminal. Hit Ctrl+C and interrupt the CFE terminal terminal. 4. Setup a TFTP server on your local machine at setup you local IP to 192.168.1.2 5. Start the TFTP Server 6. Run following commands at the CFE terminal flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx2 nvram set bootpartition=0 && nvram set partialboots=0 && nvram commit 7. Reboot router to be presented by OpenWrt Note: Only installation method via serial cable is supported at the moment. The trx firmware has to be flashed to both the partitions using following commands from CFE prompt. This will cover US and Non-US variants. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 209c5918b511d9e406a094ba246a985b640e519f)
* bcm53xx: use upstream Linksys EA9500 fixesRafał Miłecki2021-04-082-1/+30
| | | | | | | One fix was accepted, one was added. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 22369ad7887e98bdb9d1999f221dfcd5fbb2f389)
* bcm53xx: fix Linksys EA9500 partitionsRafał Miłecki2021-04-081-0/+58
| | | | | | | Use proper DT binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f8669c174ee17bbb8d59f901d639f57449dcf751)
* bcm53xx: backport Linksys Panamera (EA9500) patchesVivek Unune2021-04-085-2/+230
| | | | | | | | | | | | | | | | | These patches have been already accepted. 302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch had to be updated. [rmilecki: use actual upstream accepted patches replace v5.10 with v5.11 to match actual upstream kernel recover dropped part of the pinctrl compatible patch update filenames refresh patches] Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 39ed2265dde1bc8817f9dc6ba053268bb6939ae6)
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-04-0814-27/+324
| | | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3fd0a4222b6efbfbdb560c5b13e899ecda627494)
* mac80211: merge a few pending tx related fixesFelix Fietkau2021-04-043-0/+142
| | | | | | | Improve performance and fix potential mgmt tx hangs/warnings Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 571aedbc6cbb7a9bfc96bcad543a39d158925cbc)
* mac80211: backport upstream patches for driver disconnectFelix Fietkau2021-04-046-15/+593
| | | | | | | Needed for an mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 5dc501507222b38d731b89c3311d8253b73dd0e7)
* build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel ↵Felix Fietkau2021-04-045-4/+11
| | | | | | | | | modules This resolves issues uncovered by musl updates Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 9ac47ee46918c45b91f4e4d1fa76b1e26b9d57fe)
* generic: add missing symbolsDavid Bauer2021-04-031-0/+1
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 55ed4bf6d7bf80b705d015c3b73f772db485ba9c)
* ath79: fix label_mac for NEC Aterm WG1200CRINAGAKI Hiroshi2021-04-021-2/+6
| | | | | | | | | | | On NEC Aterm WG1200CR, the MAC address for WAN is printed in the label on the case, not LAN. This patch fixes this issue. Fixes: 50fdc0374b ("ath79: provide label MAC address") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (cherry picked from commit e2331fb5491e52e3e21ab18b58d064b344e093e5)
* ramips: correct switch config of Youku yk1Shiji Yang2021-04-021-1/+4
| | | | | | | | | | | There are only two lan ports and one wan port on Youku yk1 Fixes: e9baf8265bb8 ("ramips: add support for Youku YK1") Signed-off-by: Shiji Yang <yangshiji66@qq.com> [add Fixes:] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit b88d2850c66d7dc937e570661a047c647c588af5)
* libunwind: Add MIPS64 dep checkDonald Hoskins2021-03-291-1/+1
| | | | | | | | | | | | libunwind dependency check does not allow for MIPS64 arch. Add MIPS64 awareness. libunwind seems to support MIPS64 without issues, it was limited by the dep arch check in the Makefile. Used to compile Suricata6/Rust locally without issue. Signed-off-by: Donald Hoskins <grommish@gmail.com> (cherry picked from commit ea6d4bdde20a3fecbfc44b99f53373e1d0666e34)
* ipq40xx: net: phy: qca807x: fix GPIO driverRobert Marko2021-03-291-0/+1
| | | | | | | | | | | | While rebasing into setting bits instead of magic values, I accidentally forgot to actually set the force bit. Without it using the pins as GPIO-s did not actually work. Fixes: b5c93ed ("ipq40xx: add Qualcomm QCA807x driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 7f2d9ccd09a1d3034aaf9c943747fc1631da5cac)
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-23 01:35:26 +0000