aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* firmware-utils: bcm4908img: support extracting bootfs & rootfsRafał Miłecki2021-04-081-0/+35
| | | | | | | | It's required for upgrading firmware using single partitions instead of just blindly writing whole image. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e33957c241abf8f0dbf5f3713058d126fb4599b4)
* firmware-utils: bcm4908img: replace size with offsetRafał Miłecki2021-04-081-20/+35
| | | | | | | | It's much easier to operate on BCM4908 image data with absolute offset of each section stored. It doesn't require summing sizes over and over. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 5314cab729b743d3b8b08db4e01c3095017f4e68)
* bcm4908: rename bootfs dummy file to the 1-openwrtRafał Miłecki2021-04-081-1/+1
| | | | | | | | | | | | | The purpose of that dummy file is to make CFE work properly with OpenWrt bootfs. CFE for some reason ignores JFFS2 files with ino 0. Rename it to 1-openwrt so: 1. It's consistent with bcm63xx 2. It's OpenWrt specific so sysupgrade can distinguish it from vendor images Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 880c8b44223c9cbce3dd14da78c33676c6f1a8a6)
* bcm4908: enable JFFS2 supportRafał Miłecki2021-04-081-1/+0
| | | | | | | It's needed for accessing JFFS2 bootfs partition. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 180c4635265b4907221a62b3068ac89447cd83d7)
* firmware-utils: bcm4908img: add bootfs supportRafał Miłecki2021-04-081-3/+337
| | | | | | | | | | | | | This adds support for accessing bootfs JFFS2 partition in the BCM4908 image. Support includes: 1. Listing files 2. Renaming file (requires unchanged name length) Above commands are useful for flashing BCM4908 images which by defualt come with cferom.000 file and require renaming it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ed847ef5f340dcae1556cbc6dfaa6657a5179be6)
* firmware-utils: bcm4908img: support extracting image dataRafał Miłecki2021-04-081-0/+87
| | | | | | | It's useful for upgrading cferom, firmware, etc. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9c039d56a154bb416492bf5657093576d50cc220)
* firmware-utils: bcm4908img: find cferom sizeRafał Miłecki2021-04-081-0/+31
| | | | | | | | It's important for modifying / extracting firmware content. cferom is optional image content at the file beginning. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6af45b842bd22633fa3ccd57edaf073a759525bb)
* firmware-utils: bcm4908img: use "info" command displaying file infoRafał Miłecki2021-04-081-11/+20
| | | | | | | | BCM4908 image format contains some info that may be useful for info / debugging purposes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9b9184f1782489163eb204f3b238de778ae1214b)
* firmware-utils: bcm4908img: support reading from stdinRafał Miłecki2021-04-081-8/+38
| | | | | | | | 1. Don't allow pipe stdin as we need to fseek() 2. Don't alow TTY as it doesn't make sense for binary input Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d533b27bc09eb5323a05ed44589235a86edcda0d)
* firmware-utils: bcm4908img: detect Netgear vendor firmwareRafał Miłecki2021-04-081-25/+33
| | | | | | | | | Netgear uses CHK header which needs to be skipped when validating BCM4908 image. Detect it directly in the bcm4908img tool. Dealing with binary structs and endianess is way simpler in C. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a39f85d8b66125f07c4bcbea46b296946de60dc7)
* firmware-utils: bcm4908img: extract parsing codeRafał Miłecki2021-04-081-37/+67
| | | | | | | | | Move code parsing existing firmware file to separated function. This cleans up existing code and allows reusing parsing code for other commands. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7d5f7439428d2b4c6952af47b36acc010b846372)
* bcm4908: backport DT patch adding Ethernet MAC addressRafał Miłecki2021-04-081-0/+82
| | | | | | | | This tells OS (Linux) where from MAC should be read (bootloader MTD partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1cc5eb45d5192b41d97d5da58c34353f4c3240f9)
* firmware-utils: bcm4908kernel: name struct fieldsRafał Miłecki2021-04-081-8/+8
| | | | | | | Less magic names / values. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a3611432a6c3490fb2b6fdbc1ce664cf70900668)
* kernel: create bootfs partition when parsing on BCM4908Rafał Miłecki2021-04-081-5/+9
| | | | | | | | | It's helpful for accessing booting data (DTS, kernel, etc.). It has to be used carefully as CFE's JFFS2 support is quite dumb. It doesn't recognize deleted files and has problems handling 0 inode. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 6dd727ac24fa36ac3f23e9a5cf6781a7d1c6b797)
* firmware-utils: bcm4908img: name fields & valuesRafał Miłecki2021-04-081-8/+22
| | | | | | | Less magic numbers Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1ff7569387f69550e8a9356a109a875e4fdb4412)
* bcm4908: backport the latest bcm_sf2 commitsRafał Miłecki2021-04-086-111/+210
| | | | | | | | 1. CFP support for BCM4908 2. Upstream RGMII regs fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a49fd9db0a2bfad8ea9a09f32fadbd3cc7e46205)
* bcm4908: backport DTS patch with Ethernet TX IRQRafał Miłecki2021-04-082-1/+31
| | | | | | | It allows bcm4908_enet Linux driver to work more efficiently. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 13d9904acdd24e002aab3d6c3dd7879826b54008)
* bcm53xx: enhance support for Linksys EA9500Vivek Unune2021-04-084-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add leds and configs 2. Add network configs 3. Add script to clear partial boot flag 4. Hack to use port 5 as cpu port as port 8 connected to eth2 wont pass any frames 5. Enable EA9500 image generation Hardware Info: - Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz - Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 - DDR3 RAM - 256 MB - Flash - 128 MB (Toshiba TC58BVG0S3HTA00) - 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) - 5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch - Ports - 8 Ports, 1 WAN Ports - Antennas - 8 Antennas - Serial Port - @j6 [GND,TX,RX] (VCC NC) 115200 8n1 Flashing Instructions: 1. Connect a USB-TTL table to J6 on the router as well as a ethernet cable to a lan port and your PC. 2. Power-on the router. 3. Use putty or a serial port program to view the terminal. Hit Ctrl+C and interrupt the CFE terminal terminal. 4. Setup a TFTP server on your local machine at setup you local IP to 192.168.1.2 5. Start the TFTP Server 6. Run following commands at the CFE terminal flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx2 nvram set bootpartition=0 && nvram set partialboots=0 && nvram commit 7. Reboot router to be presented by OpenWrt Note: Only installation method via serial cable is supported at the moment. The trx firmware has to be flashed to both the partitions using following commands from CFE prompt. This will cover US and Non-US variants. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 209c5918b511d9e406a094ba246a985b640e519f)
* bcm53xx: use upstream Linksys EA9500 fixesRafał Miłecki2021-04-082-1/+30
| | | | | | | One fix was accepted, one was added. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 22369ad7887e98bdb9d1999f221dfcd5fbb2f389)
* bcm53xx: fix Linksys EA9500 partitionsRafał Miłecki2021-04-081-0/+58
| | | | | | | Use proper DT binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f8669c174ee17bbb8d59f901d639f57449dcf751)
* bcm53xx: backport Linksys Panamera (EA9500) patchesVivek Unune2021-04-085-2/+230
| | | | | | | | | | | | | | | | | These patches have been already accepted. 302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch had to be updated. [rmilecki: use actual upstream accepted patches replace v5.10 with v5.11 to match actual upstream kernel recover dropped part of the pinctrl compatible patch update filenames refresh patches] Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 39ed2265dde1bc8817f9dc6ba053268bb6939ae6)
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-04-0814-27/+324
| | | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3fd0a4222b6efbfbdb560c5b13e899ecda627494)
* mac80211: merge a few pending tx related fixesFelix Fietkau2021-04-043-0/+142
| | | | | | | Improve performance and fix potential mgmt tx hangs/warnings Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 571aedbc6cbb7a9bfc96bcad543a39d158925cbc)
* mac80211: backport upstream patches for driver disconnectFelix Fietkau2021-04-046-15/+593
| | | | | | | Needed for an mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 5dc501507222b38d731b89c3311d8253b73dd0e7)
* build: use -nostdinc and -isystem in NOSTDINC_FLAGS for out-of-tree kernel ↵Felix Fietkau2021-04-045-4/+11
| | | | | | | | | modules This resolves issues uncovered by musl updates Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 9ac47ee46918c45b91f4e4d1fa76b1e26b9d57fe)
* generic: add missing symbolsDavid Bauer2021-04-031-0/+1
| | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 55ed4bf6d7bf80b705d015c3b73f772db485ba9c)
* ath79: fix label_mac for NEC Aterm WG1200CRINAGAKI Hiroshi2021-04-021-2/+6
| | | | | | | | | | | On NEC Aterm WG1200CR, the MAC address for WAN is printed in the label on the case, not LAN. This patch fixes this issue. Fixes: 50fdc0374b ("ath79: provide label MAC address") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (cherry picked from commit e2331fb5491e52e3e21ab18b58d064b344e093e5)
* ramips: correct switch config of Youku yk1Shiji Yang2021-04-021-1/+4
| | | | | | | | | | | There are only two lan ports and one wan port on Youku yk1 Fixes: e9baf8265bb8 ("ramips: add support for Youku YK1") Signed-off-by: Shiji Yang <yangshiji66@qq.com> [add Fixes:] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit b88d2850c66d7dc937e570661a047c647c588af5)
* libunwind: Add MIPS64 dep checkDonald Hoskins2021-03-291-1/+1
| | | | | | | | | | | | libunwind dependency check does not allow for MIPS64 arch. Add MIPS64 awareness. libunwind seems to support MIPS64 without issues, it was limited by the dep arch check in the Makefile. Used to compile Suricata6/Rust locally without issue. Signed-off-by: Donald Hoskins <grommish@gmail.com> (cherry picked from commit ea6d4bdde20a3fecbfc44b99f53373e1d0666e34)
* ipq40xx: net: phy: qca807x: fix GPIO driverRobert Marko2021-03-291-0/+1
| | | | | | | | | | | | While rebasing into setting bits instead of magic values, I accidentally forgot to actually set the force bit. Without it using the pins as GPIO-s did not actually work. Fixes: b5c93ed ("ipq40xx: add Qualcomm QCA807x driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> (cherry picked from commit 7f2d9ccd09a1d3034aaf9c943747fc1631da5cac)
* bpftools: fix libbpf pkgconfig fileTony Ambardar2021-03-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | The pkgconfig file hardcodes a host library directory which cannot be overridden by OpenWrt during builds. Use SED to fix this and potential include directory problems, as is done with several other packages. This fixes a strange issue intermittently seen building iproute2 on the oxnas target: iptables modules directory: /usr/lib/iptables libc has setns: yes SELinux support: no libbpf support: no libbpf version 0.3.0 is too low, please update it to at least 0.1.0 LIBBPF_FORCE=on set, but couldn't find a usable libbpf Fixes: 2f0d672088c3 ("bpftools: add utility and library packages supporting eBPF usage") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 9e64e4ce26719ea81637b0e3d9754bd5190f0c21)
* gitignore: add .vscode for VS Code usersÁlvaro Fernández Rojas2021-03-291-0/+1
| | | | | | | For Visual Studio Code users, .vscode is created inside the workspace. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 12dbad1a86ebdbb4c9bd71b14eec245bc6373844)
* ath79: fix RS-485 on Teltonika RUT-955Daniel Golle2021-03-293-14/+6
| | | | | | | | | | DTR GPIO isn't actually needed and triggers boot warning. TX pin was off by one (GPIO 19 instead of GPIO 18). Reported-by: @tophirsch Fixes: d1130ad265 ("ath79: add support for Teltonika RUT955") Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 53a7d5d614050a38a4e78f5a9e153e7612d587f0)
* lantiq: set maximum kernel size for ARV7519RW22Aleksander Jan Bajkowski2021-03-291-0/+2
| | | | | | | | | | | Some users report that current snapshot producies non-bootable images. Stock uboot can boot images if the kernel is smaller than 2MB. Set maximum kernel size and disable image building for this board. Ref: https://forum.openwrt.org/t/astoria-arv7519rw22-bootloops-after-upgrade/89843 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> (cherry picked from commit c027dbac5a5222e6be4706a7a6a0effefce8ae76)
* ppp: compile fix: unset FILTER variable in MakefileEike Ritter2021-03-291-0/+12
| | | | | | | | | | | | | | | | | If the environment variable FILTER is set before compilation, compilation of the ppp-package will fail with the error message Package ppp is missing dependencies for the following libraries: libpcap.so.1 The reason is that the OpenWrt-patch for the Makefile only comments out the line FILTER=y. Hence the pcap-library will be dynamically linked if the environment variable FILTER is set elsewhere, which causes compilation to fail. The fix consists on explicitly unsetting the variable FILTER instead. Signed-off-by: Eike Ritter <git@rittere.co.uk> (cherry picked from commit 46cd0765d0c585dc0b48c8c0a3f116ef83cd580f)
* busybox: udhcpc, allow zero length dhcp optionsRussell Senior2021-03-291-0/+49
| | | | | | | This patch skips zero length DHCP options instead of failing. Signed-off-by: Russell Senior <russell@personaltelco.net> (cherry picked from commit 1c0436507156dc136d9e2668507817395434109e)
* mvebu: Fix mac addresses for GL.iNet GL-MV1000Sven Eckelmann2021-03-291-0/+4
| | | | | | | | | | | | | | The original GL.iNet firmware has two different mac addresses in the factory/art partition. The first one is for the WAN interface only and the second one is for both lan0 and lan1. But the original submission for OpenWrt didn't initialize the mac addresses of the LAN ports for the DSA device at all. The ethernet mac address was then used for all DSA ports. Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit c20ac84803242e5a6451184009dabc36ba83b96e)
* mvebu: Add button support for GL.iNet GL-MV1000Sven Eckelmann2021-03-291-0/+17
| | | | | | | | | | | | | | The original patch to support this device advertised support for the reset button and the "switch" in the commit message. But neither were actually integrated in the device tree or documented anywere. The button itself is now used to trigger a reset (as described in the official GL.iNet documentation). The switch itself is registered as BTN_0 like other devices from GL.iNet in ath79. Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Sven Eckelmann <sven@narfation.org> (cherry picked from commit 01b911a9381426314762822f97e3a7e658295f50)
* mvebu: enable WRT1900AC v1 and WRT32X for buildbotsTad Davanzo2021-03-291-2/+0
| | | | | | | | Kernel size limits have been dealt with. Effective revert of a1eb2c46 and ac9730c4. Signed-off-by: Tad Davanzo <tad@spotco.us> (cherry picked from commit b4f76d9f0d61779b5e04228d1eb3f2ba412ffd26)
* mvebu: venom resize kernel to 6MBTad Davanzo2021-03-293-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | venom has a 3MB kernel partition as specified by the DTS. 3MB is not sufficient for building with many kernel modules or newer kernel versions. venom uboot however as set from factory will load up to 6MB. This can be observed by looking a uboot log: NAND read: device 0 offset 0x900000, size 0x600000 6291456 bytes read: OK and from uboot environment variables: $ fw_printenv | grep "priKernSize"; priKernSize=0x0600000 Resize the root partitions from 120MB to 117MB to let kernel expand into it another 3MB. And set kernel target size to 6MB. Lastly set the kernel-size-migration compatibility version on venom to prevent sysupgrading without first reinstalling from a factory image. Signed-off-by: Tad Davanzo <tad@spotco.us> (cherry picked from commit 15309f5133d55e92bec3ed91dfb3ac9d124f6a96)
* mvebu: mamba resize kernel to 4MBTad Davanzo2021-03-293-2/+55
| | | | | | | | | | | | | | | | | | | | | | | | | mamba has a 3MB kernel partition as specified by the DTS. 3MB is not sufficient for building with many kernel modules or newer kernel versions. mamba uboot however as set from factory will load up to 4MB. This can be observed by looking a uboot log: NAND read: device 0 offset 0xa00000, size 0x400000 4194304 bytes read: OK and from uboot environment variables: $ fw_printenv | grep "pri_kern_size"; pri_kern_size=0x400000 Resize the root partitions from 37MB to 36MB to let kernel expand into it another 1MB. And set kernel target size to 4MB. Lastly add a compatibility version message: kernel-size-migration. And set it on mamba to prevent sysupgrading without first reinstalling from a factory image. Signed-off-by: Tad Davanzo <tad@spotco.us> (cherry picked from commit 10415d5e7016b69dc71c5f1b03e8e17b586f8edd)
* firewall3: update to latest git HEADTony Ambardar2021-03-291-3/+3
| | | | | | | | | | | | | | | | This includes several improvements and fixes: 61db17e rules: fix device and chain usage for DSCP/MARK targets 7b844f4 zone: avoid duplicates in devices list c2c72c6 firewall3: remove last remaining sprintf() 12f6f14 iptables: fix serializing multiple weekdays 00f27ab firewall3: fix duplicate defaults section detection e8f2d8f ipsets: allow blank/commented lines with loadfile 8c2f9fa fw3: zones: limit zone names to 11 bytes 78d52a2 options: fix parsing of boolean attributes Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit 0d75aa27d4093625c85f2d2233dd5392a7e2aa32)
* kernel: backports: mt7530: fix TRGMII mode after resetIlya Lipnitskiy2021-03-292-3/+87
| | | | | | | | | | | Backport upstream patch that fixes TRGMII mode now that mt7530 is actually resetting the switch on ramips devices. Patches apply to both Linux 5.4 and 5.10, since TRGMII is broken on both. Fixes: 69551a244292 ("ramips: manage low reset lines") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 680f91d0e5444d58815af03bf41c12592438f9d8)
* kernel: Deactivate CONFIG_VFIO in generic kernel configHauke Mehrtens2021-03-273-2/+1
| | | | | | | | | Instead of deactivating this in every target config, deactivate it once in the generic kernel config. I was asked for this config option in a x86 64 build in OpenWrt 21.02. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 7d6553c72edada262ada8dbe871243c35400573d)
* kernel: bump 5.4 to 5.4.108Hauke Mehrtens2021-03-2761-139/+132
| | | | | | | | | Refreshed all patches. Compile-tested on: x86_64, ath79, lantiq Runtime-tested on: x86_64, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: Add support for Buffalo WZR-HP-G300NHMauri Sandberg2021-03-276-5/+335
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device is a wireless router working on 2.4GHz band based on Qualcom/Atheros AR9132 rev 2 SoC and is accompanied by Atheros AR9103 wireless chip and Realtek RTL8366RB/S switches. Due to two different switches being used also two different devices are provided. Specification: - 400 MHz CPU - 64 MB of RAM - 32 MB of FLASH (NOR) - 3x3:2 2.4 GHz 802.11bgn - 5x 10/100/1000 Mbps Ethernet - 4x LED, 3x button, On/Off slider, Auto/On/Off slider - 1x USB 2.0 - bare UART header place on PCB Flash instruction: - NOTE: Pay attention to the switch variant and choose the image to flash accordingly. (dmesg / kernel logs can tell it) - Methods for flashing - Apply factory image in OEM firmware web-gui. - Sysupgrade on top of existing OpenWRT image - U-Boot TFPT recovery for both stock or OpenWRT images: The device U-boot contains a TFTP server that by default has an address 192.168.11.1 (MAC 02:AA:BB:CC:DD:1A). During the boot there is a time window, during which the device allows an image to be uploaded from a client with address 192.168.11.2. The image will be written on flash automatically. 1) Have a computer with static IP address 192.168.11.2 and the router device switched off. 2) Connect the LAN port next to the WAN port in the device and the computer using a network switch. 3) Assign IP 192.168.11.1 the MAC address 02:AA:BB:CC:DD:1A arp -s 192.168.11.1 02:AA:BB:CC:DD:1A 4) Initiate an upload using TFTP image variant curl -T <imagename> tftp://192.168.11.1 5) Switch on the device. The image will be uploaded subsequently. You can keep an eye on the diag light on the device, it should keep on blinking for a while indicating the writing of the image. General notes: - In the stock firmware the MAC address is the same among all interfaces so it is left here that way too. Recovery: - TFTP method - U-boot serial console Differences to ar71xx platform - This device is split in two different targets now due to hardware being a bit different under the hood. Dynamic solution within the same image is left for later time. - GPIOs for a sliding On/Off switch, marked 'Movie engine' on the device cover, were the wrong way around and were renamed qos_on -> movie_off, qos_off -> movie_on. Associated key codes remained the same they were. The device tree source code is mostly based on musashino's work Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> (cherry picked from commit bc356de2850f14629cb1301be719772fa1212e72)
* ath79: cfi: cmdset_0002: amd chip 0x2201 - write wordsMauri Sandberg2021-03-271-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | Generally, in upstream CFI flash memory driver uses buffers for write operations. That does not work with AMD chip with id 0x2201 and we must resort to writing word sized chunks only. That is, to not apply general buffer write functionality for this given chip. Without the patch kernel logs will be flooded with entries like below: MTD do_erase_oneblock(): ERASE 0x01fa0000 MTD do_write_buffer(): WRITE 0x01fa0000(0x00001985) MTD do_erase_oneblock(): ERASE 0x01f80000 MTD do_write_buffer(): WRITE 0x01f80000(0x00001985) MTD do_write_buffer_wait(): software timeout, address:0x01f8000a. jffs2: Write clean marker to block at 0x01a60000 failed: -5 MTD do_erase_oneblock(): ERASE 0x01f60000 MTD do_write_buffer(): WRITE 0x01f60000(0x00001985) MTD do_write_buffer_wait(): software timeout, address:0x01f6000a. jffs2: Write clean marker to block at 0x01a40000 failed: -5 References: http://patchwork.ozlabs.org/project/linux-mtd/patch/20210309174859.362060-1-sandberg@mailfence.com/ Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> [added link to usptream fix submission] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8cc0fa8faceadac85353bb1a96e074518ef124e2)
* packages: kernel: add gpio-nxp-74hc153Mauri Sandberg2021-03-273-0/+327
| | | | | | | | | | | | | | | | | | | | | NXP 74HC153 is a GPIO expander. Its original source cide sits in ar71xx architecture tree. It has been slightly modified to get GPIO pin configuration from the device tree rather than a MACH file. Changes to the source file: - Remove struct nxp_74hc153_config - in nxp_74hc153_probe(), fetch GPIO configuration from device tree - allow GPIO framework decide the base number by passing -1 to it - remove support for kernel versions below 4.5.0 - add OF device compatibility string Create a package for inclusion in image. References: https://lore.kernel.org/linux-gpio/545111184.50061.1615922388276@ichabod.co-bxl/ Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> [added link to driver usptreaming work in progress] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 6a6f9e73dd65f9201bee911d2fae8595f86c093b)
* openssl: bump to 1.1.1kEneas U de Queiroz2021-03-272-24/+23
| | | | | | | | | | | | | This version fixes 2 security vulnerabilities, among other changes: - CVE-2021-3450: problem with verifying a certificate chain when using the X509_V_FLAG_X509_STRICT flag. - CVE-2021-3449: OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 0bd0de7d43b3846ad0d7006294e1daaadfa7b532)
* build,json: backport default_packages fixesPaul Spooren2021-03-251-3/+3
| | | | | | | | | | | | Remove duplicate packages by running in `target/linux/` rather than `target/linux/<target>/<subtarget>` and sort packages alphabetically. Squash commit of: 7880a64848 build,json: 3rd fixup of default_packages b36068d35d build,json: fixup fixup of arch_packages 1bf2b3fe90 build,json: fixup missing arch_packages Signed-off-by: Paul Spooren <mail@aparcar.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:21:34 +0000