aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix lan ports on ens202extMarty E. Plummer2017-12-181-0/+1
| | | | | | | | | In the stock firmware both eth0 and eth1 are set to br-lan, add this behavior to our images. Fixes: FS#1084 Signed-off-by: Marty E. Plummer <hanetzer@protonmail.com>
* brcm63xx: fix Sercomm AD1018 status ledJonas Gorski2017-12-171-1/+1
| | | | | | | | The status led part was missed when changing the board name to *-nor. Fixes: e12c72bb52eb ("brcm63xx: Add Sercomm AD1018 support") Reported-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mt76: update to the latest version, reverts MAC address changes causing ↵Felix Fietkau2017-12-171-3/+3
| | | | | | | | | | | | | | | | | | | performance regressions cf4a5ce mt76: fix memcpy to potential null pointer on failed allocation ca5ca8c mt76x2: fix possible NULL pointer dereferencing in mt76x2_ampdu_action() 2d4b8f5 mt76x2: mac: fix possible NULL pointer dereferencing in mt76x2_mac_write_txwi() 4ca8bba mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g() 00f7e60 mt7603: fix configuration for HT40 31e9bdb mt7603: main: fix possible NULL pointer dereferencing in mt7603_ampdu_action() bf90dd2 mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation 860b185 Revert "mt76x2: init: disable APCLI by default" bcd576e Revert "mt76x2: drop wiphy->addresses" bdc6f2f Revert "mt76x2: clean up MAC/BSSID address initialization" d242650 Revert "mt76x2: remove MAC address limitation for multi-vif setups" 68b0cf1 mt76x2: add functions for setting extended MAC address registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: sync image filename with boardnameMathias Kresin2017-12-163-232/+274
| | | | | | | | | | | | | Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. While at it, normalise the image filenames by using only lower case characters and bin as file extension for sysupgrade images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop unused variable from image build codeMathias Kresin2017-12-161-3/+0
| | | | | | | Remove the DEVICE_PROFILE variable. The variable isn't used at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use the generic board detectMathias Kresin2017-12-161-19/+0
| | | | | | | Drop the target specific detection function in favour of the generic one provided by base-files. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add missing model namesMathias Kresin2017-12-161-0/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: remove the former board name from device tree modelMathias Kresin2017-12-1660-60/+60
| | | | | | | Remove the former used board name from the device model property and use the model name as it is. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use the compatible string as board nameMathias Kresin2017-12-1610-72/+136
| | | | | | | | | | | Use the first compatible string as board name in userspace. Add the new board name as well as the former used board name to the image metadata to keep compatibilty with already deployed installations. Don't add the former used boardname for boards which exists only in master or evaluation boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop SoC name from eval boards compatible stringMathias Kresin2017-12-1611-11/+11
| | | | | | Keep it in the same format as used for the other eval boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add compatible strings to dts filesMathias Kresin2017-12-1653-0/+59
| | | | | | The compatible string is mandetory for devicetree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: Add support for kernel 4.14Hauke Mehrtens2017-12-169-16/+710
| | | | | | | | This adds basic support for kernel 4.14, this was tested in qemu only. The subtarget configuration was refresh with kernel 4.14 and the options needed to make it compile on kernel 4.9 were added manually. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: include: remove last .0 from kernel versions againHauke Mehrtens2017-12-161-1/+1
| | | | | | | | Kernel 4.14 has the version number 4.14 and not 4.14.0. This was different in some older Linux kernel versions, This change makes it possible to use kernel 4.14 without any minor version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add missing dependencies to kmod-crypto-acompressHauke Mehrtens2017-12-161-0/+2
| | | | | | | kmod-lib-lzo and kmod-lib-lz4 depend in kernel 4.14 on kmod-crypto-acompress, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rtc-ds1307: add dependency to regmapHauke Mehrtens2017-12-161-1/+1
| | | | | | | In kernel 4.14 kmod-rtc-ds1307 depends on regmap-i2c, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-iio-bmp280: allow compile with kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | This package also compiles with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-zram: deactivate CONFIG_ZRAM_WRITEBACK for kernel 4.14Hauke Mehrtens2017-12-161-0/+1
| | | | | | | This new option was introduced in kernel 4.14 and should be deactivated by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xtables-addons: fix compile with kernel 4.14Hauke Mehrtens2017-12-161-0/+9
| | | | | | This fixes a compile problems seen with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-fbcon: deactivate for kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | | | CONFIG_FRAMEBUFFER_CONSOLE does not activate new modules any more in kernel 4.14, but CONFIG_FRAMEBUFFER_CONSOLE is now a boolean option which change the kmod-fb package. kmod-fbcon should be split up. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-sound-core: handle moved snd-seq-device.koHauke Mehrtens2017-12-161-1/+2
| | | | | | The snd-seq-device.ko kernel module was moved with kernel 4.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-mmc: handle moved mmc_block.koHauke Mehrtens2017-12-161-1/+2
| | | | | | mmc_block.ko was moved with kernel 4.10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rxrpc: handle renamed kernel moduleHauke Mehrtens2017-12-161-2/+3
| | | | | | | The kernel module was renamed with kernel 4.11, handle that in the package definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: deactivate some new network featuresHauke Mehrtens2017-12-161-2/+6
| | | | | | | | | | | This deactivates the following options which were introduced between kernel 4.9 and 4.14 in some kernel packages: CONFIG_INET_ESP_OFFLOAD CONFIG_INET6_ESP_OFFLOAD CONFIG_LWTUNNEL_BPF CONFIG_NET_9P_XEN Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: unset CONFIG_CIFS_SMB311 in kmod-fs-cifsHauke Mehrtens2017-12-161-1/+2
| | | | | | Do not activate the experimental feature CONFIG_CIFS_SMB311. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-ecdhHauke Mehrtens2017-12-164-1/+76
| | | | | | | | | | In kernel 4.14 kmod-bluetooth depends on kmod-crypto-ecdh, add kmod-crypto-ecdh to LEDE. Both packages also depend on the kmod-crypto-kpp package. To build this we have to fix the dependency of CRYPTO_ECDH which has a typo. This patch is already accepted upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-rsaHauke Mehrtens2017-12-161-2/+20
| | | | | | | | In kernel 4.14 kmod-crypto-hw-ccp depends on kmod-crypto-rsa, add it. kmod-crypto-rsa also packages the ASN1 parser and some other code which is currently only used by this module. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-acompressHauke Mehrtens2017-12-161-1/+13
| | | | | | In kernel 4.14 kmod-crypto-deflate depends on kmod-crypto-acompress. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-lib-zstdHauke Mehrtens2017-12-162-1/+23
| | | | | | | In kernel 4.14 kmod-fs-btrfs depends on the zstd compression libraries, add it to the package system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-daxHauke Mehrtens2017-12-161-1/+12
| | | | | | | In kernel 4.14 kmod-dm depends on kmod-dax. Add DAX: "Direct access to differentiated memory" to LEDE. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: tg3: deactivate hwmon for kernel 4.14Hauke Mehrtens2017-12-161-2/+3
| | | | | | | In kernel 4.14 hwmon support can be deactivated for the tg3 driver, deactivate it by default to save some space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: generic: Add kernel 4.14 supportHauke Mehrtens2017-12-16132-8/+25624
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support for kernel 4.14 based on the patches for kernel 4.9. In the configuration I deactivated some of the new possible security features like: CONFIG_REFCOUNT_FULL CONFIG_SLAB_FREELIST_HARDENED CONFIG_SOFTLOCKUP_DETECTOR CONFIG_WARN_ALL_UNSEEDED_RANDOM And these overlay FS options are also deactivated: CONFIG_OVERLAY_FS_INDEX CONFIG_OVERLAY_FS_REDIRECT_DIR I activated this: CONFIG_FORTIFY_SOURCE CONFIG_POSIX_TIMERS CONFIG_SLAB_MERGE_DEFAULT CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED I am not sure if I did the porting correct for the following patches: target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch target/linux/generic/hack-4.14/220-gc_sections.patch target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch target/linux/generic/pending-4.14/305-mips_module_reloc.patch target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: refresh configurationHauke Mehrtens2017-12-163-16/+3
| | | | | | | Just refresh the kernel configuration, some options are removed because they are now in the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: generic: add some more 4.9 configure optionsHauke Mehrtens2017-12-161-0/+9
| | | | | | | These are taken from the x86 target and should make support kernel 4.9 and 4.14 in the x86 target easier. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* xtables-addons: update to version 2.14Hauke Mehrtens2017-12-161-2/+2
| | | | | | This includes a compile fix needed for kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netdevices.mk: add Sun Neptune 10Gbit EthernetLucian Cristian2017-12-161-0/+16
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* kernel: tune e1000e module parametersJo-Philipp Wich2017-12-161-0/+3
| | | | | | | | | | | | | The default e1000e parameters (interrupt throttling rate, MSI/MSI-X mode) are optimized for desktop and server computers to optimize user-space execution (i.e. what's typically referred to as "useful" work). This assumption breaks on a router under load where most of the "useful" work actually takes place either in hardware interrupt handlers (IRQ) or at software IRQ (swirq) modes, so we try to reflect that by overriding these parameters with more appropriate values. Patch-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: add on-chip thermal sensors and cpuid supportPhilip Prindeville2017-12-162-1/+33
| | | | | | | | | | | Cover temperature sensors for all mainstream 64-bit processors, including AMD 10h and 15h families, Intel iCore, Xeon, Atom, and Via Nano. Also add CPUID support for user-space applications to detect CPU type. Include the on-chip sensors for 64-bit CPU's in the generic profile in case someone builds a 32-bit kernel to run on a Xeon SoC, etc. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* x86: refresh settings for 4.9.59Philip Prindeville2017-12-161-7/+1
| | | | Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* tools/expat: Update to 2.2.5Daniel Engberg2017-12-161-2/+2
| | | | | | Update (lib)expat to 2.2.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* brcm63xx: backport mdio-bus reset gpio supportJonas Gorski2017-12-1613-96/+416
| | | | | | | Backport the mdio-bus reset gpio support from 4.12 and use it instead of toggling the reset ourself. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: backport enet cleanup patchesJonas Gorski2017-12-1614-36/+415
| | | | | | Align with upstream version, mostly non-fixes and small clean ups. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: register serial through device treeJonas Gorski2017-12-16167-363/+1144
| | | | | | | Register serial consoles through device tree instead of through board data. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add uart nodesJonas Gorski2017-12-1610-0/+224
| | | | | | | Now that we can register uarts through device-tree, add them to the dtsi files. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add clkdev lookup supportJonas Gorski2017-12-1617-73/+793
| | | | | | | Add clockdev lookup support for easier providing of clocks for devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Add Sercomm AD1018 supportDaniel Gonzalez Cabanelas2017-12-167-0/+251
| | | | | | | | | | | | | | | | | | | | Add support for the Sercomm AD1018 router This a BCM6328 based board, 128 MB RAM, 128 MiB NAND flash, with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB host port (not soldered). The board also has an FXS chip (Si32177) connected via SPI (SS2#), without support in LEDE. Since NAND flash chips aren't still supported in brcm63xx, the support is for now added to work only with SPI flash chips. Therefore hardware modding, soldering a new SPI flash chip, is required to make the board work with LEDE (tested and working OK). The flash at dts is intentionally left without partitioning to let the user choose a NOR chip of any size (8, 16 or 32 MB). Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: renamed ad1018 to ad1018-nor to signify the modification] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* at91: create sdcard image for sama5Sandeep Sheriker Mallikarjun2017-12-162-0/+79
| | | | | | | | | create sdcard image using gen_at91_sdcard_img.sh for sama5 platform and sdcard image partition layout is: P0: Boot (fat32) - contains(at91bootstrap,u-boot,zImage & dtb) p1: Rootfs (ext4) Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
* ar71xx: fix invalid pointer dereference in rb95x_nand_scan_fixup()Gabor Juhos2017-12-161-0/+4
| | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access chip->options causes an invalid pointer dereference (FS#1200). Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* ar71xx: fix invalid pointer dereference in c60_nand_scan_fixup()Gabor Juhos2017-12-151-0/+4
| | | | | | | | | | | | | | | | Since Linux 4.6, mtd->priv no longer points to the NAND specific structure. Under 4.9 it contains NULL, thus using it to access the fields of the nand_chip structure causes an invalid pointer dereference. Update the code to use the mtd_to_nand() helper under 4.9 to obtain the address of the chip specific data. Compile tested only. Fixes: 7bbf4117c6fe ("ar71xx: Add kernel 4.9 support") Signed-off-by: Gabor Juhos <juhosg@freemail.hu> Tested-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: fix compiler warning in mtdsplit_minor.c under 4.4Gabor Juhos2017-12-151-0/+11
| | | | | | | | | | | | | | | | | | When mtdsplit_minor.c is compiled under Linux 4.4, the compiler drops the following warning: CC drivers/mtd/mtdsplit/mtdsplit_minor.o drivers/mtd/mtdsplit/mtdsplit_minor.c:106:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .parse_fn = mtdsplit_parse_minor, ^ drivers/mtd/mtdsplit/mtdsplit_minor.c:106:14: note: (near initialization for 'mtdsplit_minor_parser.parse_fn') The second parameter of the parser function must not have a 'const' qualifier in 4.4. The 001-mtdsplit_backport.patch removes the qualifier from other partition parsers. Update it to handle mtdsplit_minor.c as well. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
* iproute2: cake: support new operating modesKevin Darbyshire-Bryant2017-12-152-50/+129
| | | | | | | | | | | | | | | | | | | | There has been recent significant activity with the cake qdisc of late Some of that effort is related to upstreaming to kernel & iproute2 mainline but we're not quite there yet. This commit teaches tc how to activate and interprete the latest cake operating modes, namely: ingress mode: Instead of only counting packets that make it past the shaper, include packets we've decided to drop as well, since they did arrive with us on the link and took link capacity. This mode is more suitable for shaping the ingress of a link (e.g. from ISP) rather than the more normal egress. ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS. Useful in highly assymetric links (downstream v upstream capacity) where the majority of upstream link capacity is occupied with ACKS for downstream traffic. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:00:20 +0000