aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* lantiq: drop tffs patchesMathias Kresin2017-04-084-224/+2
| | | | | | | With the fritz-tools a userspace parser for the Tiny Flash File System is available and makes the tffs2 kernel patches obsolete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* firmware: rework fritz-tools packageMathias Kresin2017-04-087-31/+46
| | | | | | | | | | | | | | | | Split the fritz-tools into subpackages. fritz_tffs_read is usefull for all Fritz boards where fritz-cal_extract is only required for the Fritz 4040 at the moment. Rename the tffs related binary to the more catchy name fritz_tffs and move the whole package to utilities since the package doesn't really provide a firmware file. Make the fritz-tools available for all targets and build them shared. The tffs is used by avm on lantiq and ar71xx as well. Tested-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: update MIPS pci fix to the accepted versionMathias Kresin2017-04-083-34/+33
| | | | | | | Fix the list order instead of adjusting the controller scan order. Revert the former required changes to the lantiq PCIe driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mdadm: extend uci config supportJo-Philipp Wich2017-04-083-7/+82
| | | | | | | Extend the mdadm package to allow to explicitely configure arrays as well as device list entries. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* opkg: backport upstream fixes, code cleanupsJo-Philipp Wich2017-04-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update to latest Git in order to import the following fixes: 1d0263b check_data_file_clashes_change: remove duplicated offline root in paths a00a6a9 buildReplaces: do not add duplicated replacees 9fbedd8 opkg: compare-versions doesn't need any state 45b54f6 opkg_cmd: fix segmentation fault in opkg_compare_versions_cmd() 93de62b opkg_cmd: fix return of opkg compare-versions 51275a8 pkg_src_list_push: remove unused function 947d3d4 pkg_src_list_pop: remove unused function 980cfb2 str_list_push: remove unused function 52c31c1 str_list_prev: remove unused function 7d24212 str_list_last: remove unused function 48142a3 conffile_list_pop: remove unused function 46c5de5 pkg_dest_list_push: remove unused functions 368bb62 nv_pair_list_prev: remove unused function 2985c00 nv_pair_list_last: remove unused function f5082ac conffile_list_pop: remove unused function 89bf8b9 conffile_list_push: remove unused function 23d31fb active_list_sort: remove unused function 7fe45f2 active_list_add_depend: remove unused function 86b584d pkg_dependence_satisfied: remove unused function 816d330 Fix typo in pkg_hash_fetch_best_installation_candidate. 07f3b02 set_flags_from_control: remove function Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mediatek: various fixes for v4.9John Crispin2017-04-0731-2581/+4155
| | | | | | | | | | | | | | | * adds MT7530 DSA support * backport latest ethernet driver * add PMIC leds * add auxadc support * add efuse support * add thermal sensor support * add irq affinity support for ethernet still todo * DSA multi cpu support Signed-off-by: John Crispin <john@phrozen.org>
* kernel: add thermal monitor for nct6775/6776Philip Prindeville2017-04-071-0/+15
| | | | | | | Support for the nct6775/6776 hwmon chips, and other compatibles in the family as well as the Intel on-chip thermal sensors. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* uboot-ar71xx: fix build errorFelix Fietkau2017-04-061-0/+2
| | | | | | The HOSTCFLAGS override only works on newer u-boot versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* busybox: fix installation of cron and ntpd scripts in the default configFelix Fietkau2017-04-041-2/+2
| | | | | Fixes: 0b24850e9778 ("busybox: don't install NTP scripts if NTP isn't configured") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move initramfs's init script out of base-filesRafał Miłecki2017-04-042-1/+1
| | | | | | | | Keeping it in base-files was resulting in adding it to the base-files package. This file is meant to be included manually for initramfs images only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* u-boot.mk: pass HOSTCC and HOST_CFLAGS into the buildFelix Fietkau2017-04-042-0/+7
| | | | | | | Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls from the build system Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target.mk: check that CPU_TYPE has known CPU_CFLAGS mappingPhilip Prindeville2017-04-041-0/+5
| | | | | | | | If someone creates a target and indicates a CPU_TYPE, but there's no corresponding support for that CPU_TYPE's flags in include/target.mk then that should probably be indicated rather than silently ignored. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* ath10k-firmware: update the qca988x firmware to 10.2.4-1.0-00029Changmin Jang2017-04-041-4/+4
| | | | | | | | update the qca988x firmware to firmware-5.bin_10.2.4-1.0-00029. According to LEDE Forum, the new firmware supports mesh mode. Also, it seems to have several improvements. Signed-off-by: Changmin Jang <ckdalsdk12@gmail.com>
* scripts/download.pl: fix error message on hash mismatchFelix Fietkau2017-04-041-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: fix build error on mac os xFelix Fietkau2017-04-041-0/+18
| | | | | | asm/* includes are not safe for the host build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport an upstream fix for queue start/stop handlingFelix Fietkau2017-04-031-0/+29
| | | | | | Fixes issues with 802.11s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: tp-link.mk: always include device version in image and DEVICE_TITLEPiotr Dymacz2017-04-031-54/+54
| | | | | | | | | | | | | | | | | | | | There are currently several supported TP-Link devices without specified version number in image name and/or DEVICE_TITLE (e.g. WBS210, WBS510, TL-WR810N, TL-WA7510N, TL-WPA8630), but vendor website shows that there are already more than one version of them on the market. For devices like Archer C5, which second version is based on a total different platform, missing version number in DEVICE_TITLE (used in menuconfig) might be misleading for users. To make it less confusing for users and easier to maintain in future, include version number in image name and DEVICE_TITLE for all TP-Link devices, even if there is only one version of device at the moment. Also, keep DEVICE_TITLE in same format for all TP-Link devices. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Acked-by: John Crispin <john@phrozen.org>
* ar71xx: add userspace support for Mikrotik RB2011iLRon Angeles2017-04-036-2/+11
| | | | | | | | | Kernel/hardware support for this board has been implemented since Chaos Calmer. This set of patches is to get the board identified in userland. This will allow support for things like sysupgrade, configuring initial LED state, configuring initial switch state, etc. Signed-off-by: Ron Angeles <ronangeles@gmail.com>
* ar71xx: add TP-LINK TL-WR841N/ND v12 imageVittorio Gambaletta2017-04-031-1/+7
| | | | | | | | | | | | | This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). If the stock firmware web interface doesn't accept LEDE factory image, it can be flashed via the U-Boot TFTP recovery mode, by long-pressing the reset button after power on. The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12). Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* netifd: fix fw3 warnings in dhcp scriptHans Dedecker2017-04-031-1/+1
| | | | | | Fix fw3 warnings in dhcp script in case fw3 is not enabled Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: move PKG_CONFIG_DEPENDS from feeds.mk to opkgFelix Fietkau2017-04-032-7/+8
| | | | | | | Normal packages don't rely on the feed configuration variables for the build step Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: allow specifying flow-control to grub on serial consolePhilip Prindeville2017-04-032-2/+7
| | | | | | | On the more sophisticated (i.e. deeper FIFO) serial controllers, flow-control might be needed to avoid dropping output. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kexec-tools: get kexec running on MUSL and x86 hardwarePhilip Prindeville2017-04-032-0/+211
| | | | | | | Couple of important upstream patches (slated for 2.0.15) that are necessary for kexec to run on MUSL and on x86 hardware. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* busybox: don't install NTP scripts if NTP isn't configuredPhilip Prindeville2017-04-031-0/+4
| | | | | | | | If you're using Chrony or NTPD you don't want the busybox NTP server as well. Make it's installation truly conditional. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [simplify]
* modules: Add kmod-igbvf kernel module for Intel(R) 82576 Virtual Function ↵Ye Tao2017-04-031-0/+18
| | | | | | | | | | | | | | | | Ethernet adapters Intel(R) 82576 is an adapter which supports SR-IOV. Thus the host can assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to gain different advantages (performance, VF to VF communications, host kernel offload, etc.). The driver of the passthroughed VFs is the igbvf (igb is NOT compatible). This is essential for VM guests, to enable them to utilize this feature. Signed-off-by: Ye Tao <tydus@hongo.wide.ad.jp>
* kernel: update kernel 4.4 to 4.4.59Hauke Mehrtens2017-04-029-30/+30
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to 4.9.20Hauke Mehrtens2017-04-0212-213/+38
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix ubi auto attach loggingJohn Crispin2017-04-021-3/+5
| | | | | | The patch is missing a trailing new line Signed-off-by: John Crispin <john@phrozen.org>
* odhcpd: update to git HEAD version (FS#635)Hans Dedecker2017-04-011-3/+3
| | | | | | | | | | 3d9f406 rework IPv6 dns address selection (FS#635) bc6c3ac ndp: keep an exact copy of IPv6 interface addresses 6eb1e01 ndp: code cleanup eea7d03 rework IPv6 address dump logic 24d21c7 ndp: add syslog debug tracing Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mac80211: rt2x00: import upstream changes and rebase our patchesDaniel Golle2017-03-3049-189/+1676
| | | | | | | | Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ar71xx: Compex WPJ563 supportChristian Mehlis2017-03-3012-0/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc) - RAM: 128 MiB - Storage: 16MB NOR flash - Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO - Ethernet: 2x1G Tested and working: - ethernet / switch / lan / wan - 2.4GHz SoC wifi - PCIe - leds - buzzer Ramload: - tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin - bootm 0x84000000 Install: - tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin - erase 0x9f030000 +$filesize - erase 0x9f680000 +1 - cp.b $fileaddr 0x9f030000 $filesize Erasing 0x9f680000 is required because uboot defines "bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot the higher address. I think the 16 mb flash are intended to be used as 8+8mb for a fallback image. In my hardware only the lower address has a bootable image. But to make sure future hardware will boot lede too, I erase one block, so uboot will skip this address. Signed-off-by: Christian Mehlis <christian@m3hlis.de>
* ar8327: Add workarounds for AR8337 switch.Vittorio Gambaletta2017-03-302-1/+62
| | | | | | | | | | | | | | | | RGMII RX delay setting needs to be always specified for AR8337 to avoid port 5 RX hang on high traffic / flood conditions. Also, the HOL registers that set per-port and per-packet-priority buffer sizes are updated with the reduced values suggested by the QCA switch team. Finally, AR8327 reserved register fixups are disabled for the AR8337. This patch is adapted from the Code Aurora QSDK, but with magic values mapped to proper defines. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* dnsmasq: use logical interface name for dhcp relay configKarl Vogel2017-03-291-1/+2
| | | | | | | | | The relay section should use the logical interface name and not the linux network device name directly. This to be consistent with other sections of the dnsmasq config where 'interface' means the logical interface. Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
* ar71xx: drop default CONSOLE valuesJohn Crispin2017-03-291-4/+0
| | | | | | Compex boards dont need to set these as they are default. Signed-off-by: John Crispin <john@phrozen.org>
* fstools: update to latest git HEADJohn Crispin2017-03-291-3/+3
| | | | | | | 20c16fc cmake: Make blockd link against libjson-c 92b4c2c libfstools: add basic documentation of mount functions Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: move Compex WPJ342 to generic build targetChristian Mehlis2017-03-293-7/+10
| | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de>
* ar71xx: move Compex WPJ344 to generic build targetChristian Mehlis2017-03-293-7/+10
| | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de>
* ar71xx: move Compex WPJ531 to generic build targetChristian Mehlis2017-03-293-7/+10
| | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de>
* ar71xx: move Compex WPJ558 to generic build targetChristian Mehlis2017-03-293-7/+10
| | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de>
* kernel: add w83627hf-wdt watchdog timer modulePhilip Prindeville2017-03-291-0/+15
| | | | | | | | | This is a 3rd party chipset which is not present on all Intel reference designs, so make it a module rather than baked in (this will also alleviate conflicts with drivers which also detect some of the same chipsets). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: kmod packaging for Intel 10G ethernet ixgbe driverPhilip Prindeville2017-03-292-0/+35
| | | | | | | A lot of Ivybridge and Haswell servers have the 82598/82599 Ethernet controllers. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* firewall: document rules for IPSec ESP/ISAKMP with 'name' optionYousong Zhou2017-03-282-15/+16
| | | | | | | | | | These are recommended practices by REC-22 and REC-24 of RFC6092: "Recommended Simple Security Capabilities in Customer Premises Equipment (CPE) for Providing Residential IPv6 Internet Service" Fixes FS#640 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ipq8064: fix dwc3-of-simple module unloadingThomas Reifferscheid2017-03-281-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without patch unloading the dwc3-of-simple module went stuck after successfully removing hcd.1 during the hcd.0 removal: root@LEDE:/# rmmod dwc3-of-simple [ 21.391846] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.391931] usb usb4: USB disconnect, device number 1 [ 21.397038] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 21.401111] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 21.406685] usb usb3: USB disconnect, device number 1 [ 21.412848] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 21.417248] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 21.422521] usb usb2: USB disconnect, device number 1 followed by nothing. Sometimes a stall CPU was detected, or a kernel panic, or a reboot occurred after a couple of minutes. At the same time unloading the dwc3 module followed by dwc3-of-simple module was working repeatedly. root@LEDE:/# rmmod dwc3 [ 53.827328] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 53.827412] usb usb4: USB disconnect, device number 1 [ 53.832630] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 53.836452] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 53.842314] usb usb3: USB disconnect, device number 1 [ 53.848412] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 53.852542] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 53.857882] usb usb2: USB disconnect, device number 1 [ 53.863956] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 53.867875] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 53.873696] usb usb1: USB disconnect, device number 1 [ 53.879742] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered root@LEDE:/# rmmod dwc3-of-simple root@LEDE:/# For the non-working case, the code was stuck in a readl() in http://lxr.free-electrons.com/source/drivers/usb/host/xhci.c#L91 because http://lxr.free-electrons.com/source/drivers/usb/dwc3/dwc3-of-simple.c#L126 was disabling the wrong clocks when removing hcd.1 (it was disabling the clock of hcd.0). That's why the readl() went stuck when removing hcd.0 The patch however addresses the clock assignment from the .dtsi file. Most probably it went into openwrt here: https://dev.openwrt.org/browser/trunk/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch?rev=45261 copied from Qualcomms attempt here: https://lkml.org/lkml/2015/11/20/116 Now unloading and repeated module loading is working just fine, no matter if you'd remove dwc3-of-simple or dwc3. root@LEDE:/# rmmod dwc3-of-simple [ 24.089679] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 24.089765] usb usb4: USB disconnect, device number 1 [ 24.094856] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 24.098963] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 24.104522] usb usb3: USB disconnect, device number 1 [ 24.111194] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 24.115086] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 24.120396] usb usb2: USB disconnect, device number 1 [ 24.126503] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 24.130347] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 24.135948] usb usb1: USB disconnect, device number 1 [ 24.142085] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered root@LEDE:/# Fixes: dwc3-of-simple module unloading Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* ipq8064: Fix dwc3 module unloadingThomas Reifferscheid2017-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow module unloading by fixing a mistake. qcom_dwc3_phy_write_readback() is expecting (phy, offset, mask, value) while the mistake was calling it with (phy, offset, value, mask) The patch is swapping value and mask. Without the patch unloading the dwc3 module was showing a write to QSCRATCH failed and repeated module loading was failing: root@LEDE:/# rmmod dwc3 [ 19.167998] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 19.168084] usb usb4: USB disconnect, device number 1 [ 19.173371] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 19.177134] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 19.182960] usb usb3: USB disconnect, device number 1 [ 19.189023] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 19.192989] qcom-dwc3-usb-phy 110f8830.phy: write: 8000000 to QSCRATCH: 0 FAILED [ 19.199064] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 19.205912] usb usb2: USB disconnect, device number 1 [ 19.211611] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 19.215905] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 19.221751] usb usb1: USB disconnect, device number 1 [ 19.227307] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [ 19.231795] qcom-dwc3-usb-phy 100f8830.phy: write: 8000000 to QSCRATCH: 0 FAILED root@LEDE:/# modprobe dwc3 [ 29.583343] phy phy-100f8830.phy.4: phy init failed --> -110 [ 29.583399] dwc3 10000000.dwc3: failed to initialize core [ 29.588169] dwc3: probe of 10000000.dwc3 failed with error -110 [ 29.652943] phy phy-110f8830.phy.2: phy init failed --> -110 [ 29.652988] dwc3 11000000.dwc3: failed to initialize core [ 29.657735] dwc3: probe of 11000000.dwc3 failed with error -110 root@LEDE:/# With patch repeated module unloading and loading is working good: root@LEDE:/# rmmod dwc3 [ 22.622214] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 22.622298] usb usb4: USB disconnect, device number 1 [ 22.627401] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 22.631492] xhci-hcd xhci-hcd.1.auto: remove, state 1 [ 22.637054] usb usb3: USB disconnect, device number 1 [ 22.643721] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 22.647421] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 22.652910] usb usb2: USB disconnect, device number 1 [ 22.659219] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 22.662768] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 22.668604] usb usb1: USB disconnect, device number 1 [ 22.674803] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered root@LEDE:/# modprobe dwc3 [ 25.404592] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 25.404694] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 25.409444] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010 [ 25.416589] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x10000000 [ 25.426509] hub 1-0:1.0: USB hub found [ 25.431626] hub 1-0:1.0: 1 port detected [ 25.435472] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 25.439206] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 25.444573] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 25.452926] hub 2-0:1.0: USB hub found [ 25.460420] hub 2-0:1.0: 1 port detected [ 25.525037] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 25.525099] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 25.529750] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010 [ 25.537002] xhci-hcd xhci-hcd.1.auto: irq 169, io mem 0x11000000 [ 25.546583] hub 3-0:1.0: USB hub found [ 25.551997] hub 3-0:1.0: 1 port detected [ 25.555734] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 25.559621] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 25.564942] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 25.573063] hub 4-0:1.0: USB hub found [ 25.580842] hub 4-0:1.0: 1 port detected root@LEDE:/# Fixes: dwc3 module unloading Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* mac80211: ath10k: allow failure getting board id via otpHannu Nyman2017-03-281-0/+11
| | | | | | | | | | | | | | | ath10k tries to fetch board id via otp, but that fails for many chips like QCA988x, QCA9984 etc. Recent commit cc189c0b7f removed the earlier hack that had allowed QCA radios to work, as that hack was incompatible with the new wifi chips being introduced to the source tree. Restore functionality for the existing wifi chips by modifying the return value of the 'board id via otp' function to a value that is recognised as a harmless error, so that name evaluation continues by using the board file. Patch originally suggested by Christian Lamparter in forum discussion. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ramips: fix pcie irq mapping for mt7621 on v4.9John Crispin2017-03-281-10/+18
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* bcm53xx: put kernel into TRX when building initramfs imagesRafał Miłecki2017-03-271-0/+25
| | | | | | | | | | | Many (most?) devices can't boot raw kernel using tftp and probably none allows flashing it. It's way more usable to have TRX with kernel containing initrams as such an image can be actually flashed. An exception are Buffalo devices which have recovery mode with support for booting kernels over TFTP. For them keep building default images. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: wpj531: fix GPIOs for LEDLeon M. George2017-03-271-4/+4
| | | | | | /sys/devices/platform/leds-gpio/leds/ was not initialised with working LEDs. Signed-off-by: Leon M. George <leon@georgemail.eu>
* ipq8064: enable 2nd USB port on R7500Thomas Reifferscheid2017-03-272-4/+6
| | | | | | | | | Makes use of the syscon tcsr and enables both USB ports. Cleans up qcom-ipq8064.dtsi from previous attempts. Fixes FS#497 Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 14:45:28 +0000