aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-30527-104565/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: disable edgerouter imageJohannes Kimmel2020-10-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch disables the image for edgerouter devices by default, since it isn't able to boot at the moment. Currently the edgerouter image won't boot. Current kernels have an option CONFIG_CAVIUM_CN63XXP1 that needs to be enabled for this chip. If the kernel was compiled without this option, following message is displayed and the machine reboots: [ 36.778028] Kernel panic - not syncing: OCTEON II DCache prefetch workaround not in place (cfa0000c). [ 36.778028] Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1). [ 36.794398] Rebooting in 1 seconds.. This was last confirmed on 2020-10-29. The description of this option states, that enabling it will possibly cause performance issues on other chips. Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>
* image: drop obsolete legacy image recipesAdrian Schmutzler2020-10-302-104/+0
| | | | | | | LegacyDevice is not used anymore in our tree, so let's drop it together with the relevant definitions and recipes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: sort image-commands.mk alphabeticallyAdrian Schmutzler2020-10-301-214/+215
| | | | | | | | | The definitions in image-commands.mk seem to have no particular order. Sort them alphabetically to make it easier to actually find anything there. No other changes made beyond moving entire blocks. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: drop combined-image build recipeAdrian Schmutzler2020-10-301-8/+0
| | | | | | | Build/combined-image is only used in ath25 target, and that defines its own version. Thus, drop the unused definition in image-commands.mk. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* image: drop unused legacy NAND build recipesAdrian Schmutzler2020-10-301-29/+0
| | | | | | | This drops unused legacy recipes Image/Build/SysupgradeNAND and Image/Build/UbinizeImage. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move kmod-i2c-bcm-iproc to I2C menuDaniel Golle2020-10-301-1/+1
| | | | | | | | A typo resulted in that module having it's own menu. Move it into the I2C menu as it was most likely intended. Fixes: 1291274335 ("kernel: package bcm53xx i2c module") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning"Daniel Golle2020-10-302-4/+1
| | | | | | | | | This reverts commit 7f94e2afcf090f751c9f7f7ea46e8ef8d93ee84b. Package kmod-nft-core is missing dependencies for the following libraries: nft_reject.ko Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rules.mk: simplify FAKEROOT command lineJo-Philipp Wich2020-10-301-6/+1
| | | | | | | | Since fakeroot is patched to discover related ressources relative to the STAGING_DIR_HOST environment variable, there is no need to pass the path to faked or the preload library manually anymore. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* fakeroot: make fakeroot script relocatableJo-Philipp Wich2020-10-301-0/+25
| | | | | | | | | | | | Patch the fakeroot script template to discover faked and libfakeroot.so relative to the STAGING_DIR_HOST environment variable, similar to how it is done for automake, libtool, quilt and autoconf already. This avoids the need for passing the paths to faked and libfakeroot.so manually every time we invoke fakeroot and subsequently allows us to drop OS X specific logic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build,IB: reload packages/ only if existingPaul Spooren2020-10-301-1/+4
| | | | | | | | | | | With the fix of external kmod feeds it is possible to ship the ImageBuilder without any packages except the pseudo packages kernel and libc. Therefore the local package feeds becomes optional. This commit adds a check to the package_reload function to only run if the local feed is existing. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build,IB: include kmods only in local buildsPaul Spooren2020-10-302-12/+16
| | | | | | | | | | The buildbots generate a kmod archive which should be used instead of a local copy. This is possible due to the introduction of a kernelversion specific feed. This commit adds the ability of using only signed package feeds. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: FeedSourcesAppend add kmod feed to snapshotPaul Spooren2020-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Nightly snapshot builds of OpenWrt change their kernels versions frequently and lose thereby compatibility to kmods from the upstream target specific packages feed. To allow opkg to install packages over multiple days a kmod archive is offered at $target/$subtarget/kmods/$kernelversion and added as a feed to created snapshot images via a buildbot step[1]. Instead of using a buildstep add the kmod feed directly via FeedSourcesAppend to be included in the ImageBuilder repositories.conf as well. This is conditionally only done for SNAPSHOT builds and when running as BUILDBOT. Releases are unaffected as they don't include kernel version changes and local builds may use different kernel versions or magics than available upstream. This commit allows in a future step to ship ImageBuilders without a locally stored kmod archive. [1]: https://git.openwrt.org/?p=buildbot.git;a=blob;f=phase1/master.cfg;h=3ba7a1606e89b095b10555e703ea96e93295deec;hb=HEAD#l1025 Signed-off-by: Paul Spooren <mail@aparcar.org>
* kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warningPhilip Prindeville2020-10-302-1/+4
| | | | | | | | | | Seeing the following: ERROR: module '/home/philipp/lede/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.33/net/ipv4/netfilter/nft_reject_ipv4.ko' is missing. modules/netfilter.mk:1068: recipe for target '/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk' failed make[3]: *** [/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk] Error 1 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* hostapd: remove hostapd-hs20 variantDaniel Golle2020-10-301-18/+0
| | | | | | | | Hotspot 2.0 AP features have been made available in the -full variants of hostapd and wpad. Hence we no longer need a seperate package for that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add {hostapd,wpad}-basic-openssl variantsRui Salvaterra2020-10-302-0/+28
| | | | | | | | | Add OpenSSL-linked basic variants (which provides WPA-PSK only, 802.11r and 802.11w) of both hostapd and wpad. For people who don't need the full hostapd but are stuck with libopenssl for other reasons, this saves space by avoiding the need of an additional library (or a larger hostapd with built-in crypto). Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* opkg: bump to git HEADDaniel Golle2020-10-301-3/+3
| | | | | | 8769c75 pkg_hash: don't suggest incompatible packages Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: mikrotik: use vmlinuz (zBoot ELF)John Thomson2020-10-292-3/+5
| | | | | | | | | | | - minimal built initramfs: 10MB vmlinux ELF -> 6MB vmlinuz - ~5 seconds for kernel decompression, which was equivalent to the additional time to load the uncompressed ELF from SPI NOR. - Removes requirement for lzma-loader, which may have been causing some image builds to fail to boot on Mikrotik mt7621. Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* mt7621: mikrotik: use vmlinuz (zBoot ELF)John Thomson2020-10-292-2/+5
| | | | | | | | | | | | - minimal built initramfs: 11MB vmlinux ELF -> 4.5MB vmlinuz - ~5 seconds for kernel decompression, which was equivalent to the additional time to load the uncompressed ELF from SPI NOR. - Removes requirement for lzma-loader, which may have been causing some image builds to fail to boot on Mikrotik mt7621. Fixes: FS#3354 Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* build: image: add append-dtb-elf helperJohn Thomson2020-10-291-0/+7
| | | | | | | | | | | | | | | | | | The mips kernel vmlinux image supports adding an empty ELF section for DTB to be later inserted into with MIPS_ELF_APPENDED_DTB. This ELF + inserted DTB image can then be directly booted on some devices. Example usage: image/subtarget.mk: KERNEL_NAME := vmlinux.elf KERNEL_INITRAMFS_NAME := vmlinux-initramfs.elf KERNEL := kernel-bin | append-dtb-elf On mt7621 memory size needed to be manually specified. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
* kernel: mips: zboot: put appended dtb into a sectionChuanhong Guo2020-10-291-0/+36
| | | | | | | | | | | | This will make a separated section for dtb appear in ELF, and we can then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB is set in kernel config. command to patch a dtb: objcopy --set-section-flags=.appended_dtb=alloc,contents \ --update-section=.appended_dtb=<target>.dtb vmlinuz vmlinuz-dtb Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: add linux zboot supportChuanhong Guo2020-10-291-0/+26
| | | | | | | | linux-mips has zboot code which can create a self-extracting kernel image. This allows enabling kernel zboot support for ramips targets. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* hostapd: wpas: add missing config symbolsDavid Bauer2020-10-282-3/+3
| | | | | | | | | | | | | | | This adds missing config symbols for interworking as well as Hotspot 2.0 to the wpa_supplicant-full configuration. These symbols were added to the hostapd-full configuration prior to this commit. Without adding them to the wpa_supplicant configuration, building of wpad-full fails. Thanks to Rene for reaching out on IRC. Fixes: commit be9694aaa297 ("hostapd: add UCI support for Hotspot 2.0") Fixes: commit 838b412cb527 ("hostapd: add interworking support") Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: install /etc/hotplug.d/ntp/25-dnsmasqsec world-readableDaniel Golle2020-10-281-2/+2
| | | | | | | | /etc/hotplug.d/ntp/25-dnsmasqsec is being sourced by /sbin/hotplug-call running as ntpd user. For that to work the file needs to be readable by that user. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Fix wpa_supplicant config removal ubus callSven Eckelmann2020-10-282-2/+2
| | | | | | | | | | | | | | | If mac80211_setup_supplicant() is called with enabled=0 then it should just destroy the interface and remove the configuration from wpa_supplicant. But the ubus method call always returned Command failed: Method not found because the actual name of the method is "config_remove". Fixes: b5516603dd90 ("mac80211: more wifi reconf related fixes") Signed-off-by: Sven Eckelmann <sven@narfation.org> [bump PKG_RELEASE] Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: bump PKG_RELEASEDavid Bauer2020-10-281-1/+1
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add interworking supportDavid Bauer2020-10-282-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | This adds configuration options to enable interworking for hostapd. All options require iw_enabled to be set to 1 for a given VAP. All IEEE802.11u related settings are supported with exception of the venue information which will be added as separate UCI sections at a later point. The options use the same name as the ones from the hostapd.conf file with a "iw_" prefix added. All UCI configuration options are passed without further modifications to hostapd with exceptions of the following options, whose elements can be provided using UCI lis elements: - iw_roaming_consortium - iw_anqp_elem - iw_nai_realm - iw_domain_name - iw_anqp_3gpp_cell_net Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add FTM responder supportDavid Bauer2020-10-281-0/+13
| | | | | | | | | | | | | | | This adds support for enabling the FTM responder flag for the APs extended capabilities. On supported hardware, enabling the ftm_responder config key for a given AP will enable the FTM responder bit. FTM support itself is unconditionally implemented in the devices firmware (ath10k 2nd generation with 3.2.1.1 firmware). There's currently no softmac implementation. Also allow to configure LCI and civic location information which can be transmitted to a FTM initiator. Signed-off-by: David Bauer <mail@david-bauer.net>
* mac80211: pass phy name to hostapd_set_bss_optionsDavid Bauer2020-10-281-1/+1
| | | | | | | | | | | | hostapd_set_bss_options expects the PHY as second and the VIF as third argument. However, only the VIF was passed as second argument without a third argument at all. This was never a problem, as both PHY and VIF were never accessed. However, with FTM support the PHY is needed to determine the HW support when configuring the BSS. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: remove ieee80211v optionDavid Bauer2020-10-281-14/+6
| | | | | | | | | | | | | Remove the ieee80211v option. It previously was required to be enabled in order to use time_advertisement, time_zone, wnm_sleep_mode and bss_transition, however it didn't enable any of these options by default. Remove it, as configuring these options independently is enough. This change does not influence the behavior of any already configured setting. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: make rrm report independent of ieee80211k settingDavid Bauer2020-10-281-5/+4
| | | | | | | | Allow to configure both RRM beacon as well as neighbor reports independently and only enable them by default in case the ieee80211k config option is set. Signed-off-by: David Bauer <mail@david-bauer.net>
* uci: fix package mirror hashPetr Štetiar2020-10-271-1/+1
| | | | | | | | I've forget to update PKG_MIRROR_HASH in my previous package version bump. Fixes: 095cc2b7454a ("uci: update to version 2020-10-06") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* umdns: update to version 2020-10-26Petr Štetiar2020-10-271-3/+3
| | | | | | | | | | | | | | | 59e4fc98162d cache: cache_answer: fix off by one 4cece9cc7db4 cache: cache_record_find: fix buffer overflow be687257ee0b cmake: tests: provide umdns-san binary bf01f2dd0089 tests: add dns_handle_packet_file tool 134afc728846 tests: add libFuzzer based fuzzing de08a2c71ca8 cmake: create static library cdc18fbb3ea8 interface: fix possible null pointer dereference 1fa034c65cb6 interface: fix value stored to 'fd' is never read 3a67ebe3fc66 Add initial GitLab CI support 50caea125517 cmake: fix include dirs and libs lookup Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uci: update to version 2020-10-06Petr Štetiar2020-10-271-2/+2
| | | | | | | | | | | | | | | | 52bbc99f69ea Replace malloc() + memset() with calloc() 3fbd6c923434 ucimap: Check return of malloc() eae126f66663 file: Check buffer size after strtok() 7f574273180a file: use size_t for position and pointer 19770b6949b9 file: use dynamic memory allocation for tempfile name aa46546794ac file: uci_file_commit: fix memory leak 671c7554bfde uci: silence UBSAN error by using offsetof macro from compiler ea5bbd57d0e1 tests: cram: add uci import testing on fuzzer corpus 31f78bfbf75f cmake: add uci-san cli built with clang sanitizers a3e650911f5e file: uci_parse_package: fix heap use after free 9bd361ca3236 tests: add libFuzzer based fuzzing Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add support for Wavlink WL-WN530HG4Nuno Goncalves2020-10-273-2/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | Same hardware as Phicomm K2G but different flash layout. Specification: - SoC: MediaTek MT7620A - Flash: 8 MB - RAM: 64 MB - Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5) - Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA. - UART: 1 x UART on PCB - 57600 8N1 Flash instruction: To avoid requiring UART for TFTP a dual flash procedure is suggested to install the squashfs image: 1. Rename openwrt-ramips-mt7620-wavlink_wl-wn530hg4-initramfs-kernel.bin to WN530HG4-WAVLINK. 2. Flash this file with the factory web interface. 3. With OpenWRT now running use standard sysupgrade to install the squashfs image. Signed-off-by: Nuno Goncalves <nunojpg@gmail.com> [remove dts-v1, remove model from LED labels, wrap commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* malta: relocate CPU_TYPE setting to subtarget makefilesTony Ambardar2020-10-273-1/+2
| | | | | | | Move CPU_TYPE:=24kc (32-bit) from the top-level target makefile to the be/le subtarget makefiles, which is consistent with the 64-bit subtargets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* lantiq: add support for AVM FRITZ!Box 7430Leon Maurice Adam2020-10-275-3/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: - SoC: Lantiq VRX 220 - CPU: 2x MIPS 34Kc 500 MHz - RAM: 128 MiB 250 MHz - Flash: 128 MiB NAND - Ethernet: Built-in Fast Ethernet switch, 4 ports used - Wifi: Atheros AR9381-AL1A b/g/n with 2 pcb/internal and 1 external antennas - USB: 1x USB 2.0 - DSL: Built-in A/VDSL2 modem - DECT: Dialog SC14441 - LEDs: 1 two-color, 4 one-color - Buttons: 1x DECT, 1x WIFI - Telephone connectors: 1 FXS port via TAE or RJ11 connector With the exception of FXS/DECT everything works (there are no drivers for AVM's FXS or DECT implementation), DSL is yet untested. Installation: Boot up the device and wait a few seconds. Run the eva_ramboot.py script in scripts/flashing/ to load the initramfs image on the device: $ ./scripts/flashing/eva_ramboot.py 192.168.178.1 <path to your initramfs image> If the script fails to reach the device, maybe try 169.254.120.1. Wait until booting is complete. You should now be able to reach your device under the default ip address 192.168.1.1. Before flashing, check if linux_fs_start is not set to 1 in the tffs partition: $ fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start If linux_fs_start is 1, you will need to reset it to 0, either by FTP, upgrading FritzOS or doing a recovery. Now you should be able to flash the device using sysupgrade. Signed-off-by: Leon Maurice Adam <leon.adam@aol.de> Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [drop BOARD_NAME, use wpad-basic-wolfssl, drop 4.19, drop dts-v1, remove model prefix from LED names] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fix indent in vr9_avm_fritz7412.dtsAdrian Schmutzler2020-10-271-1/+1
| | | | | | Indent should be tabs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: reorganize board patches into fewer filesAdrian Schmutzler2020-10-2675-4067/+2730
| | | | | | | | | | | | | | | At the moment, bcm63xx creates one patch for each board to add to board_bcm963xx.c. While this is not really helpful to get an overview in the first place, it is particularly painful if you want to change something for an early file and have to refresh all the later patches accordingly. Since it does not look like these board patches are upstreamed either, this commit consolidates all board additions into one patch per "board". By this, both adding and editing boards should become much simpler, and we drop about 1300 lines of "code" from patches as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: enable upgrade from ar71xx for Qxwlan devicesAdrian Schmutzler2020-10-262-0/+14
| | | | | | | This supports upgrade from ar71xx for the recently added Qxwlan devices E1700AC v2, E558 v2, E750A v4 and E750G v8. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: use dedicated function to move config backupRoman Kuzmitskii2020-10-261-8/+14
| | | | | | | | | | | | | | All octeon devices use the same or a very similar way to backup and restore configuration. We expect to have more devices added and in order to stop repeating ourselves move the logic to a separate function. While at it, add a few checks. Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [commit message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dnsmasq: include IPv6 local nameserver entryJoel Johnson2020-10-261-0/+1
| | | | | | | | | For IPv6 native connections when using IPv6 DNS lookups, there is no valid default resolver if ignoring WAN DHCP provided nameservers. This uses a runtime check to determine if IPv6 is supported on the host. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
* sdk: keep the linux package in the same subdir as in the main build systemFelix Fietkau2020-10-261-1/+4
| | | | | Fixes: 953435795d17 ("build: always build package/kernel/linux") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: fix block protection clearingNick Hainke2020-10-261-0/+28
| | | | | | | | | | | | | | | The block protection bits of macronix do not match the implementation. The chip has 3 BP bits. Bit 5 is actually the third BP but here the 5th bit is SR_TB. Therefore the patch adds SR_TB to the mask. In the 4.19er kernel the whole register was simply set to 0. The wrong implementation did not remove the block protection. This led to jffs2 errors in the form of: "jffs2: Newly-erased block contained word 0x19852003 at offset 0x..." This caused inconsistent memory and other errors. Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Nick Hainke <vincent@systemli.org>
* layerscape: several kernel fix-ups from NXP linux factoryYangbo Lu2020-10-263-0/+146
| | | | | | | | | | | | | NXP linux factory unifies one linux kernel for i.MX, Layerscape and S32 platforms. It provides a common code base for their SDKs. Add several kernel patches for bug fix from linux factory last release. Git: https://source.codeaurora.org/external/qoriq/qoriq-components/linux Tag: LTS-5.4.47-20200828 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update tfa to LSDK-20.04-update-290520Biwen Li2020-10-261-4/+4
| | | | | | | | | Update tfa to LSDK-20.04-update-290520. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [fix PKG_RELEASE bump] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: update u-boot to LSDK-20.04-update-290520Biwen Li2020-10-261-4/+4
| | | | | | | | | Update u-boot to LSDK-20.04-update-290520. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [fix PKG_RELEASE bump] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: update ls-rcw to LSDK-20.04-update-290520Biwen Li2020-10-261-4/+4
| | | | | | | | | Update ls-rcw to LSDK-20.04-update-290520. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, fix PKG_RELEASE change] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: update kernel to LSDK-20.04-V5.4-update-290520Biwen Li2020-10-262-0/+274
| | | | | | | | | | | Update kernel from LSDK-20.04-V5.4 to LSDK-20.04-V5.4-update-290520. Only two patches added for Layerscape. LSDK kernel link https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: harmonize wrapping for IMAGE/* definitionsAdrian Schmutzler2020-10-262-3/+6
| | | | | | Always keep the first line empty for multi-line IMAGE/* definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>