aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for ELECOM WRC-1750GST2INAGAKI Hiroshi2021-03-222-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> (cherry picked from commit b3ca1f30efd7bb96a22f72b766d302e552265276)
* ath79: fix lan port display order for sitecom wlr-7100Walter Sonius2021-03-221-1/+1
| | | | | | | | | | | Physical port order watched from the back of the device is: 4 / 3 / 2 / 1 / WAN which also matches corresponding leds. This patch corrects LuCI switch webpage LAN port order. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [improve commit title, fix sorting in 02_network] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 46c0634b508f731df487a7909c439b2794445e26)
* mvebu: add LED support for GL.iNet GL-MV1000Jeff Collins2021-03-222-1/+46
| | | | | | | | | This patch enables LED support for the GL.iNet GL-MV1000 Signed-off-by: Jeff Collins <jeffcollins9292@gmail.com> [add SPDX identifier on new file, add aliases, minor cosmetic issues] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 6e0c780eb3b4ba1e52216c1d671897749dd81829)
* bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835Álvaro Fernández Rojas2021-03-221-0/+1
| | | | | | | | | It was removed in bac74aff5e36, but it should have been disabled. More info: https://forum.openwrt.org/t/make-image-stops-at-random-number-generator-bcm27xx/91429/7 Fixes: bac74aff5e36 ("bcm27xx: bcm2711: disable HW_RANDOM_BCM2835") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit f93b544f01)
* uhttpd: update to git HEADHauke Mehrtens2021-03-211-4/+4
| | | | | | | 15346de client: Always close connection with request body in case of error Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1170655f8b792b34f899350cb0272ad94bb2d3e2)
* uhttpd: Execute uci commit and reload_config onceHauke Mehrtens2021-03-211-4/+6
| | | | | | | | | Instead of doing uci commit and reload_config for each setting do it only once when one of these options was changed. This should make it a little faster when both conditions are taken. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 501221af542b5154fbf8788f8426bc7f5443764a)
* uhttpd: Reload config after uhttpd-mod-ubus was addedHauke Mehrtens2021-03-212-1/+3
| | | | | | | | | | | | | Without this change the config is only committed, but the uhttpd daemon is not reloaded. This reload is needed to apply the config. Without the reload of uhttpd, the ubus server is not available over http and returns a Error 404. This caused problems when installing luci on the snapshots and accessing it without reloading uhttpd. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d25d281fd6686bda67636f6c1df918145b6cb738)
* mbedtls: update to 2.16.10Magnus Kroken2021-03-212-13/+13
| | | | | | | | | | | | | | | | | | | | This release of Mbed TLS provides bug fixes and minor enhancements. This release includes fixes for security issues. Security fixes: * Fix a buffer overflow in mbedtls_mpi_sub_abs() * Fix an errorneous estimation for an internal buffer in mbedtls_pk_write_key_pem() * Fix a stack buffer overflow with mbedtls_net_poll() and mbedtls_net_recv_timeout() * Guard against strong local side channel attack against base64 tables by making access aceess to them use constant flow code Full release announcement: https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.10 Signed-off-by: Magnus Kroken <mkroken@gmail.com> (cherry picked from commit dbde2bcf60b5d5f54501a4b440f25fe7d02fbe5d)
* glibc: update to latest 2.33 commitHans Dedecker2021-03-211-2/+2
| | | | | | | | | | | | | db32fc27e7 test-container: Always copy test-specific support files [BZ #27537] 79c6be6a0a nptl: Remove private futex optimization [BZ #27304] f90d6b0484 pthread_once hangs when init routine throws an exception [BZ #18435] dd8023c2ac elf: ld.so --help calls _dl_init_paths without a main map [BZ #27577] ea5a537e87 elf: Always set l in _dl_init_paths (bug 23462) 64f6c287ad x86: Handle _SC_LEVEL1_ICACHE_LINESIZE [BZ #27444] 32b9280f1d io: Return EBAFD for negative file descriptor on fstat (BZ #27559) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 956490ad6abead94c8b06e55b687074fa2fd5c62)
* archs38: Add CONFIG_HZ=100Hauke Mehrtens2021-03-191-0/+1
| | | | | | | | This kernel config option was missing and resulted in a question when building. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 047b7621bb3ac266d193cf110a468e42f844be4f)
* glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)Hans Dedecker2021-03-181-2/+2
| | | | | | | | | | | | | | a151f2e05a nscd: Fix double free in netgroupcache [BZ #27462] ee9f98d9ca x86: Set minimum x86-64 level marker [BZ #27318] 3e880d7337 nss: Re-enable NSS module loading after chroot [BZ #27389] 71b2463f61 x86: Add CPU-specific diagnostics to ld.so --list-diagnostics a1eb3915e7 x86: Automate generation of PREFERRED_FEATURE_INDEX_1 bitfield 33dc1dd602 ld.so: Implement the --list-diagnostics option 8d4241b897 string: Work around GCC PR 98512 in rawmemchr 6efa2d44c8 S390: Add new hwcap values. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 0ef3c58ac83397dcc81ad739ffe09702bc7f58ff)
* bcm53xx: backport first 5.13 DTS changesRafał Miłecki2021-03-173-1/+476
| | | | | | | | This adds NVMEM bindings that are needed for proper booting on Linksys devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 98d456a14e00e24acec36247fb5bd379da90f84e)
* bcm47xx: make WGT634U NVRAM patch apply againRafał Miłecki2021-03-171-19/+9
| | | | | | Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 9530b9bb78845910de711d425f1e4b1c7d539b13)
* bcm53xx: initialize NVRAM from NVMEM driverRafał Miłecki2021-03-172-0/+92
| | | | | | | | | | | | NVRAM access may be needed early in boot process. Reading it using mtd happens quite late in the init process. Add NVRAM initialization to the NVMEM driver which comes up early and depends on IO mapping only. This is required by Linksys devices which use NVRAM content for proper partitioning (detecting current firmware partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit baf04eed028a838518c65be48cbaabe0892343aa)
* kernel: backport Broadcom NVRAM driver cleanupsRafał Miłecki2021-03-175-0/+357
| | | | | | | Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1c48eee5b2bcfaf9815cc9a6f6664392d17164cb)
* bcm53xx: backport NVMEM NVRAM driverRafał Miłecki2021-03-173-0/+181
| | | | | | | | It supports NVRAM access described using DT binding. Right now NVRAM data is exposed using /sys/bus/nvmem/ only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 01b1b375281b77233d65eb0ebda8e4e3a1bd2407)
* bcm53xx: backport more upstream dts stuff from kernel 5.11Rafał Miłecki2021-03-177-0/+507
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8078d89a5357d13dc3f2e2055fd9d663c4f1bd04)
* bcm53xx: group dts backports by upstream kernel versionRafał Miłecki2021-03-174-1/+6
| | | | | | | It's a simple renaming thing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d0ee398c36983ccb2ee514e71f10d3c274546f17)
* bcm4908: backport recent bcm_sf2 changesRafał Miłecki2021-03-177-8/+265
| | | | | | | One 5.12 link fix and 5.13 crossbar support. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e1b4fd52a8efe1dfcad4f4fbe59f1c35a09be0bd)
* bcm4908: backport recent bcm4908_enet changesRafał Miłecki2021-03-174-0/+431
| | | | | | | This includes 5.12 fix and 5.13 improvements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7091e312307f4563d4a7afb5946140120cfa87fa)
* bcm4908: backport first PHY 5.13 patchesRafał Miłecki2021-03-172-3/+43
| | | | | | | | 1. Upstream accepted version of Kconfig change 2. Documentation binding fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d7c8ca4d0b5c18c08e645f010fd0012f54c1c102)
* bcm4908: use accepted 5.13 DTS patchesRafał Miłecki2021-03-1712-50/+238
| | | | | | | | | | | | | Some patches were slightly cleaned up. One things worth mentioning is that adding: phy-mode = "rgmii" broke SF2 driver. It made it access random register breaking switch setup. That's why this commit also adds a quick sf2 fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 05dbfe616d551bce1a19d3846c8949c047325624)
* kernel: add pending mtd patches adding NVMEM supportRafał Miłecki2021-03-1710-11/+260
| | | | | | | | | It's meant to provide upstream support for mtd & NVMEM. It's required e.g. for reading MAC address from mtd partition content. It seems to be in a final shape so it's worth testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e90e75b12c818c49704755b9e530491aee2d554c)
* kernel: move mtd ofpart accepted patchRafał Miłecki2021-03-171-0/+0
| | | | | | | Move upstream patch to the backport directory. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit deceb039931cd8eb011a0eb65731f335662070d0)
* bcm4908: prepare to support TP-Link Archer C2300 V1Rafał Miłecki2021-03-175-0/+239
| | | | | | | | | | | It's a BCM4906 based device (2 CPU cores). It has 512 MiB of RAM, 4 LAN ports, 1 WAN port, 2 USB ports, NAND flash. WiFi unknown at this point. Flashing is possible using CFE only, proper image will be worked on later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8d24da14702b8da820bf2e3952d5691f77136018)
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-171-3/+3
| | | | | | | d035016 tp-link: rename to tplink to match DT vendor prefix Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 4d961436c490800237fdca177b782a82aa300c32)
* bcm63xx-cfe: update to the latest masterRafał Miłecki2021-03-171-3/+3
| | | | | | | | 3fb6f1c tp-link: c2300-v1: add cferam file 79f9578 sercomm: vox-2.5: add cferam file Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ac39c4bd6000aa435905f4e97a241f582a50c0f8)
* kernel: add the latest mtd patch extending ofpart parserRafał Miłecki2021-03-178-43/+41
| | | | | | | | | | | | | This adds the latest version of ofpart commit. It hopefully 1. Doesn't break compilation 2. Doesn't break partitioning (this time). It's required to implement fixed partitioning with some quirks. It's required by bcm53xx, bcm4908, kirkwood, lantiq and mvebu. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 7a7b2fd809809fbd7045bd3dad4fc896a6fef06f)
* bcm4908: backport Ethernet driver fixes from the 5.12Rafał Miłecki2021-03-174-2/+103
| | | | | | | The most noticeable one is fix for RX stopping on high traffic. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit acbea54bc29a22d8fb171bc9da0f1b16fb0ec233)
* bcm4908: add bcm_sf2 fixes for the 5th GPHYRafał Miłecki2021-03-172-0/+76
| | | | | | | | This allows using the last integrated PHY (and so e.g. WAN port on the ASUS GT-AC5300). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ad8b759fd17bd31fdb7a026f247fd6ec81b372d3)
* build,ib: add STRIP_ABI option for manifestPaul Spooren2021-03-161-1/+2
| | | | | | | | | | | | | The ImageBuilder `make manifest` prints all installed packages. This function can be used to create a list of package and corresponding package versions before attempting image creation. When called with `--strip-abi` OPKG can automatically strip attached ABIVersions from package names. Make this function accessible for the ImageBuilder by adding a `STRIP_ABI` variable. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 0f7cd97f812adaf4b2c2048227610d150aec72cc)
* kernel: bump 5.4 to 5.4.105Hauke Mehrtens2021-03-1616-193/+17
| | | | | | | | | | | | | Refreshed all patches. The following patches were applied upstream: * 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch * 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch Compile-tested on: x86_64, ipq40xx, ath79 Runtime-tested on: x86_64, ipq40xx, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* rpcd: update to git HEADDaniel Golle2021-03-151-3/+3
| | | | | | | | d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations ccb7517 sys: packagelist: drop ABI version from package name (cherry picked from commit da339a6d3f78f86bb653f29dd1d1aea8351bfdad) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-151-3/+3
| | | | | | | | | | | d71856a pkg: pass-through ABIVersion to status file d3a63b3 libopkg: add option to strip ABI versions from listed names 5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies (cherry squashed from commit 6a7a1f1c64cb307aef561b66956d32867b119a24, commit 988ed0080284903d1fe4851c5ae8f1238bc61da2 and commit b5f6d20560b71025d376cb3052f1d1c2e92b409d) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* include: store ABIVersion in Packages indexPaul Spooren2021-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | With the existence of ABI versions there is no clean way to determine the package name without an attached ABI version. The Packages index is stored on device to know what packages are installed. The ABIVersion was recently removed in c921650382 "build: drop ABI version from metadata", while ABI versions still exists. This becomes a problem if a user tries to export installed packages via `ubus call rpcd-sys packagelist` which would return package names including the ABI version. Trying to find these packages in a later release with changes ABI version is impossible. This commits adds the `ABIVersion` field again. Knowing both the combined (SourceName + ABIVersion) and the `ABIVersion` it is possible to calculate the package `SourceName` without storing it in the on-device package list. Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit fc5b101c06928884d2b0c42b11bf917d29538971) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: update to version v0.8Daniel Golle2021-03-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a857b45 resolv/locale: eventually this should be more efficient 11ed281 some more optimization 764a475 add redundant calls to file.search_conffile_dirs() 7d4558e fs: treat devtmpfs that same as tmpfs 81b677e adds irqbalance skeleton 5506244 irqbalance rules cc96cd8 adds usbutil and gtpfdisk skels 01e2a55 some fsck, gptfdisk, mkfs and usbutil rules d6d1e7d usbutil: output to terminal da576fa fsck, gptfdisk and usbutil rules 09b39e9 unbound 241a029 hotplugcall: allow dac_read_search (is a subset of dac_override) af0fe90 adds label for tcsh 160f79e adds tcpdump 6d02b96 adds coreutil execfile for busybox alternatives ac54884 coreutilexecfile: these are known to require privileges, so exclude 8cb3b66 adds chrootexecfile 6d329d3 this saves 9KiB and its a bit more robust 88e2425 move addpart/delpart/partx to gptfdisk.cil 261012d ntphotplug: reads ubox data files 0473ace various 740e820 work through to genfs_seclabel_symlinks loose ends (Linux 5.10) bef21f5 TODO adds a note about how I dont need to upgrade to polver 33 from 31 cb2e5a3 ubus uses ntpdhotplug fd, and some genfs_seclabel_symlink changes 07df9b9 luci, rpcd and wpad (mainly genfs_selabel related but not all) 8d86cab genfs_seclabel loose ends for blockmount, hotplugcall, irqbalance, zram-swap b8156cd adds a note about how i forgot to target blockd 6e82ab8 adds blockd and related 254ff43 Makefile: exclude blockd from mintesttgt 4dc6bc2 pppd update related and unbound-odhcp rules 3d7da7a igmpproxy tidy some loose ends c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf 5a18967 adds igmpproxy skeleton 7e6a218 logread: support resolving dns names e39ca8b netifd: add support for /etc/udhcpc.user 7952bd0 odhcp6c: support /etc/odhcp6c.user ba0eb4e swconfig, fwenv, agent 4556b8a pppd cosmetic 9324d9d pppd: sends AT commands to model using /dev/ttyUSBN 417b14a ttydev: add some more ttyUSB ed739dc example: dont depend on policycoreutils 97613f9 dropbear: using dropbear as scp: dns name resolving 12c193b dropbear tcp connect ssh ports for scp c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional 8c5de35 this is a bug 8d5c463 uhttpd rcboot rcdnsmasq 094266e hostapd and wpa_supplicant aef0bd7 mountroot: maintains /tmp/sysupgrade.tar 24f0406 dropbear: allow it to read tmp.fs files 2901433 firstboot mkfsf2fs rcboot 2c4afb7 blockmount mmc 465ca98 adds industrial i/o (iio) nodedev 82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon 7df78bd ubus: "support" older ubusd versions that run as root 4458bce swconfig: allow using terminal (to print output) e8d606d sslcert: openssl linked: this shaves off 200 bytes 93afffb jshn ntpdhotplug 0b847f0 wpad: reads /etc/ssl/openssl.cnf f14ee34 indent fix a0c7cad mtd, uhttpd, ubus and ntpdhotplug d74f98f adds a not about checkreqprot requirement in some scenarios affacce example: add policycoreutils-setfiles for make check 4f944dc kmodloader and fwenv: efe36a3 netifd: adds a comment/reminder 581b087 more fw_printenv loose ends 30177a4 fw_setenv: needs mtd write access to set and delete env da28f4c fw_printenv: some minor clean ups a062053 fw_printenv missing rules 244ba5f blockmount: extroot and /rwm 0745a6a squid: allow squid to run sslcrtd with domain transition b851df6 squid fix 8c55acd squid: adds certfile and allow connect http but... b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid) 5ff39bd squid: forgot about luci 5366c97 squid/rcsquid some basic fill in 8743da6 squid skeleton 687a43b adds squid 3128 port to httpproxy port Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry squashed from commit 3ffc30f05aef1a72bc16af8665032164b152fc15 and commit 41a8f093fb26f372fc94e0016cf544ac65718b0b) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* checkpolicy: update to version 3.2Dominick Grift2021-03-151-3/+3
| | | | | | | | | 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit 49edc4d17f241bca2a566dfdee0a64538b046cd7) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* secilc: update to version 3.2Dominick Grift2021-03-151-3/+3
| | | | | | | | | | | | | | | 49ff851c secilc: fixes cil_role_statements.md example 03881703 secilc/docs: add custom color theme 4c8d6094 secilc/docs: add syntax highlighting for secil 057d72af secilc/docs: use fenced code blocks for cil examples e8bcdb84 cil_network_labeling_statements: fixes nodecon examples eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes 9e9b8103 secilc/docs: document expandtypeattribute fbe1e526 Update the cil docs to match the current behaviour. Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit 0b58ebcfe215c2456b752042e80268fe1ec6173a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* policycoreutils: update to version 3.2Dominick Grift2021-03-151-8/+8
| | | | | | | | | | | | | | | | d464187c policycoreutils: sestatus belongs to bin not sbin d59932a7 policycoreutils: Resolve path in restorecon_xattr 5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify 57dd1f65 policycoreutils/setfiles: Drop unused nerr variable be7f54cb setfiles: drop ABORT_ON_ERRORS and related code 9207823c setfiles: Do not abort on labeling error c064d214 selinux_config(5): add a note that runtime disable is deprecated 8bc865e1 newrole: support cross-compilation with PAM and audit ba2d6c10 fixfiles: correctly restore context of mountpoints Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit 68934a5704be61e952c6ce04573bb54577b26680) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libsemanage: update to version 3.2Dominick Grift2021-03-151-3/+3
| | | | | | | | | | | | | | c35919a7 libsemanage: sync filesystem with sandbox 5b05e829 Revert "libsemanage/genhomedircon: check usepasswd" edae9275 libsemanage: Free contents of modkey in semanage_direct_remove ce46daab libsemanage/genhomedircon: check usepasswd 6ebb35d2 libsemanage: Bump libsemanage.so version c08b73d7 libsemanage: Drop deprecated functions b46406de libsemanage: Remove legacy and duplicate symbols Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit 4670492ad72e54e0608ef5f92d7066c1c7fa8f45) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libselinux: update to version 3.2Dominick Grift2021-03-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 142826a3 libselinux: fix segfault in add_xattr_entry() 398d2cee libselinux: rename gettid() to something which never conflicts with the libc 8f0f0a28 selinux(8,5): Describe fcontext regular expressions 9cc6b5cf libselinux/getconlist: report failures 156dd0de libselinux: update getseuser e2dca5df libselinux: accept const fromcon in get_context API da4829d0 libselinux: Always close status page fd 45b15c22 selinux(8): explain that runtime disable is deprecated 3c16aaef selinux(8): mark up SELINUX values c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable db0f2f38 libselinux: Add build option to disable X11 backend 4a142ac4 libsepol: Bump libsepol.so version d23342a9 libselinux: convert matchpathcon to selabel_lookup() 7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format. f5d644c7 libselinux: Add additional log callback details in man page for auditing. 075f9cfe libselinux: Fix selabel_lookup() for the root dir. a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices. a63f93d8 libselinux: initialize last_policyload in selinux_status_open() ef902db9 libselinux: safely access shared memory in selinux_status_updated() 9e4480b9 libselinux: Remove trailing slash on selabel_file lookups. 21fb5f20 libselinux: use full argument specifiers for security_check_context in man page e7abd802 libselinux: fix build order 05bdc031 libselinux: use kernel status page by default Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit b1fc2b5b0be61d994d6a0429fd78331c0c57639a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libsepol: update to version 3.2Dominick Grift2021-03-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails 6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf 0861c659 libsepol: Validate policydb values when reading binary policy 8f5409cf libsepol: Create function ebitmap_highest_set_bit() 0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete 32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast 4662bdc1 libsepol/cil: be more robust when encountering <src_info> 6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument 0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks 1b36ace2 libsepol: include header files in source files when matching declarations 1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check 72a88d75 libsepol: remove unused files eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit 1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values() 5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums 34bd9a9d libsepol: destroy filename_trans list properly bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails 228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit a25d9104 libsepol/cil: constify some strings e2d01842 libsepol/cil: propagate failure of cil_fill_list() 6c8fca10 libsepol/cil: do not add a stack variable to a list 38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias 3c357285 libsepol/cil: remove useless print statement 90809674 libsepol/cil: always destroy the lexer state d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible 2aac859a libsepol/cil: Use the macro NODE() whenever possible d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases() 9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node() ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_* 89dab467 libsepol: free memory when realloc() fails 2d353bd5 libsepol/cil: Give error for more than one true or false block 4a142ac4 libsepol: Bump libsepol.so version 506c7b95 libsepol: Drop deprecated functions ae58e84b libsepol: Get rid of the old and duplicated symbols c97d63c6 libsepol: silence potential NULL pointer dereference warning 64387cb3 libsepol: drop confusing BUG_ON macro 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 a152653b libsepol/cil: Fix neverallow checking involving classmaps 734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy 685f577a libsepol/cil: Validate constraint expressions before adding to binary policy 8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl> (cherry picked from commit 2a1bdde0d05dd97aa58da546d15197409d481bb3) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: rename mtk-hsdma to hsdma-mt7621Ilya Lipnitskiy2021-03-151-2/+2
| | | | | | | | | | | | | Follows upstream rename: https://lore.kernel.org/driverdev-devel/20210130034507.2115280-1-ilya.lipnitskiy@gmail.com/ Fixes ramips builds on 5.4.102 Cc: John Audia <graysky@archlinux.us> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> (cherry picked from commit 58ad113087b3db7567507202b94d94756056a455)
* kernel: add compatibility with upstream threaded NAPI patchFelix Fietkau2021-03-141-6/+19
| | | | | | | | Enable threading if dev->threaded is set. This will be used to bring mt76 back in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 3d1ea0d77f9d)
* busybox: backport fixes for 1.33.0Hannu Nyman2021-03-133-1/+67
| | | | | | | | | Backport two fixes for 1.33.0 * history file storing * traceroute command option parsing Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (cherry picked from commit c1f3c52564fdec85394e7c338f56df0943ce8b10)
* bcm63xx: AD1018-nor: add NAND flashDaniel González Cabanelas2021-03-081-0/+24
| | | | | | | | | | The Sercomm AD1018 has a NAND flash. We recently added support for NANDs in this target. Use the internal NAND as additional storage. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry-picked from commit a48ef37747)
* kernel: bump 5.4 to 5.4.102Hauke Mehrtens2021-03-0641-82/+82
| | | | | | | | | Refreshed all patches. Compile-tested on: ath79, lantiq, ipq40xx, x86_64 Runtime-tested on: ipq40xx, x86_64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport GCC 10 usbip build fix for 5.4Rui Salvaterra2021-03-051-0/+33
| | | | | | | | | | | | | | From the original commit message: "With GCC 10, building usbip triggers error for multiple definition of 'udev_context', in: - libsrc/vhci_driver.c:18 and - libsrc/usbip_host_common.c:27. Declare as extern the definition in libsrc/usbip_host_common.c." Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 0eef8402ee2ad014121932c860174e6d95440e17)
* kernel: b53: update the BCM5365 UIDDaniel González Cabanelas2021-03-052-4/+4
| | | | | | | | | | | | | | | | | BCM63XX internal PHYs and BCM5365 SoC internal switch are both using the same phy_driver->phy_id, causing conflicts and unnecessary probes. E.g the BCM63XX phy internal IRQ is lost on the first probe. The full BCM5365 UID is 0x00406370. Use an additional byte to mask the BCM5365 UID to avoid duplicate driver phy_id's. This will fix the IRQ issue in internal BCM63XX PHYs and avoid more conflicts in the future. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (merge both cherry-picked commits) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commits cbcac4fde8 and cfa43f8119)
* bcm27xx: bcm2711: disable HW_RANDOM_BCM2835Álvaro Fernández Rojas2021-03-051-1/+0
| | | | | | | This driver is only present on BCM2708, BCM2709 and BCM2710. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry-picked from commit bac74aff5e)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 23:41:38 +0000