aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath79: add hwver parameter to buffalo-tagINAGAKI Hiroshi2018-10-073-5/+6
| | | | | | | In order to be able to set the value of "hardware version" other than "3", I added the "hwver" parameter. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ath79: Add support for TP-Link TL-WR842N-v2Robert Marko2018-10-074-1/+221
| | | | | | | | | | | | | | | | | | | | This PR adds support for TP-Link TL-WR842N-v2 router which is supported by ar71xx to ath79. This is a low cost model with following specs: CPU: Atheros AR9341 SoC RAM: 32 MB DDR1 Flash: 8 MB NOR SPI Switch: Internal AR9341 5 port 10/100 Mbit Ports: 5x 10/100 Mbit(1x WAN, 4x LAN) USB: 1x USB2.0 WLAN: 2.4 GHZ AR9341 Installation: Simply flash the factory image through stock firmware WEB UI. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: Create /var/lock directory in platform_do_upgrade_*Sven Eckelmann2018-10-071-8/+1
| | | | | | | | | | | | | | | | | | The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") while there were still scripts using it: * target/linux/ar71xx/base-files/lib/upgrade/allnet.sh * target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh * target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh Not running the hooks can either prevent a successful upgrade or brick the device because the fw_setenv program cannot be started correctly. Instead of adding this hook again, the directory /var/lock for fw_setenv can also just be created directly before fw_setenv is called. Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ar71xx: Create /var/lock directory in platform_do_upgrade_*Sven Eckelmann2018-10-072-16/+3
| | | | | | | | | | | | | | | | | | The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") while there were still scripts using it: * target/linux/ar71xx/base-files/lib/upgrade/allnet.sh * target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh * target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh Not running the hooks can either prevent a successful upgrade or brick the device because the fw_setenv program cannot be started correctly. Instead of adding this hook again, the directory /var/lock for fw_setenv can also just be created directly before fw_setenv is called. Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ar71xx: Use sysupgrade's RAMFS_COPY_* for fw_(set|print)envSven Eckelmann2018-10-073-9/+6
| | | | | | | | | | | | The install_bin from /lib/upgrade/common.sh is no longer creating the symlinks when a secondary parameter is added. But the fw_setenv program was always copied this way to the ramdisk for the upgrade. Instead, this should be done using RAMFS_COPY_* like on all other platforms. Fixes: 438dcbfe74a6 ("base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ath79: fix build warningMathias Kresin2018-10-071-2/+0
| | | | | | | | | | | | | | | | | | | | The image build code for the Ubiquiti Nanostation AC series adds the factory image as to be build image. The same is already done by an included recipe which results into an expanded IMAGE variable of: IMAGES = sysupgrade.bin factory.bin factory.bin The build system doesn't like these duplicates and issues the following warning: Makefile:82: warning: overriding recipe for target... Get remove the duplicate factory image to get rid of the warning. Fixes: 5736af8024be ("ath79: Add support for Ubiquiti NanoStation AC loco") fa3c2676ab0c ("ath79: Add support for Ubiquiti Nanostation AC") Signed-off-by: Mathias Kresin <dev@kresin.me>
* odhcpd: update to latest git HEAD (FS#1853)Hans Dedecker2018-10-071-4/+4
| | | | | | | | 57f639e (HEAD -> master, origin/master, origin/HEAD) odhcpd: make DHCPv6/RA/NDP support optional 402c274 dhcpv6: check return code of dhcpv6_ia_init() ee7472a router: don't leak RA message in relay mode (FS#1853) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iw: strip a few more non-essential features from iw-tinyFelix Fietkau2018-10-071-1/+46
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iw: fix filtering linked object files for iw-tinyFelix Fietkau2018-10-071-1/+1
| | | | | | It was broken by the recent commit that added iw-full Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: don't hijack the status ledMathias Kresin2018-10-071-14/+0
| | | | | | | | | | Don't hijack the status led to indicate the wireless state. If we don't have a dedicated wireless led, it's as simply as the wireless status can't be indicated. Such a led misuse should be set by the user and not shipped by default. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move status led unset to devicetreeMathias Kresin2018-10-078-25/+0
| | | | | | | Release the led used for boot status indication via devicetree instead of setting a default off trigger in userspace. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for indicating the boot state using multiple ledsMathias Kresin2018-10-07214-217/+877
| | | | | | | | | Use diag.sh version used for other targets supporting different leds for the different boot states. The existing led sequences should be the same as before. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: set F5D8235 v1 usb led trigger via devicetreeMathias Kresin2018-10-072-5/+26
| | | | | | | Assign the usbdev trigger via devicetree and drop the userspace handling of the usb leds. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: set rt2880 pci controller of_nodeMathias Kresin2018-10-071-0/+32
| | | | | | | Set the PCI controller of_node such that PCI devices can be instantiated via device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: set usb led trigger via devicetreeMathias Kresin2018-10-0770-80/+235
| | | | | | | | | | Assign the usbdev trigger via devicetree for all subtargets and drop the userspace handling of the usb leds. With the change all usb ports are triggering the usb led instead of only usb 1.1 XOR usb 2.0 XOR usb 3.0 as it was before. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath79: Add support for Ubiquiti Nanostation ACTobias Schramm2018-10-076-0/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 5 GHz AC wireless outdoor PoE CPE with internal 2.4 GHz management radio CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI Switch: QCA8334 Ports: 2 GbE ports (1x PoE in, 1x PoE passthrough) WLAN: 5 GHz QCA899X (PCI) and 2.4 GHZ AR9342 Successor to the old NanoStation M5 with AC wireless. The integrated QCA899X is a Ubiquiti branded part with modified vendor and product id (0777:11ac9). Serial Serial settings: 115200, 8N1 * = plated through hole 0 = nylon screw [Top of device] +--------------------------+ | [label] | | 0 | | 0 | | [ubnt] | | [logo] 3V3 * | | TX * | | RX * | | GND * | | | | * | | * | | * | | * | | 0 | | 0 | | | | | Installation 1. Connect to serial header on device 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* ath79: Add support for Ubiquiti NanoStation AC locoTobias Schramm2018-10-074-3/+66
| | | | | | | | | | | | | | | | | | | | | | | Atheros AR9342, 16 MB flash, 64 MB RAM Successor to the old NanoStation M5 loco with AC wireless. Includes a mac80211 patch for ath10k_pci because Ubiquiti uses a Ubiquiti branded and customized QCA988X with vendor id 0777 and device id 11ac for AC wireless. Installation 1. Connect to serial header on device (8N1 115200) 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* ath79: Add generic device tree for Ubiquiti WA boardsTobias Schramm2018-10-071-0/+92
| | | | Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* mkfwimage: Add image type definition for WA imagesTobias Schramm2018-10-072-47/+129
| | | | | | | | | | | | | This patch adds a new type of ubiquiti image, the WA image. First seen on the NanoStation AC loco the generic name implies that we will see this type of image on more ubiquiti devices thus it makes sense to implement it in mkfwimage. The main difference is that WA images are signed. The "END" header has been replaced by a "ENDS" header followed by a 2048 bit RSA signature. This signature is not being generated by mkfwimage and filled with 0x00. Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
* ath79: fix MAC address for Buffalo BHR-4GRVINAGAKI Hiroshi2018-10-073-2/+8
| | | | | | | | | | | | | | | | | | I added mtd-mac-address for WZR-HP-G450H and BHR-4GRV in 1df1ea4d7e8b6ae3351780ed58800ccd9edd4c27, but that address in ART is incorrect for BHR-4GRV. WZR-HP-G450H has wlan eeprom and MAC address in ART, but BHR-4GRV has only MAC address in ART. - WZR-HP-G450H - eeprom: 0x1000 - MAC: 0x1002 - BHR-4GRV - MAC: 0x0 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* intel-microcode: update to version 20180807aHauke Mehrtens2018-10-071-3/+3
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-lantiq: fix compile with modern host dtcThomas Nixon2018-10-071-0/+19
| | | | | | | | In dtc version 1.4.6 the macro names in header include guards changed, but the build relies on them matching in order to replace selected headers. This is a horrible hack to work around this. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* uboot-envtools: adds r7800 uboot env supportAnsuel Smith2018-10-072-1/+4
| | | | | | This fix and adds support for r7800 uboot env Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* bcm53xx: added basic dts for linksys ea6500v2Rene Kjellerup2018-10-072-1/+70
| | | | | | | | only thing not working is the b43 5GHz wifi band as upstream kernel doesn't supporthe 0x4360 chip so far Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
* mac80211: Use @KERNEL alias instead of hardlinkDaniel Engberg2018-10-071-1/+1
| | | | | | Use @KERNEL alias provided by toolchain instead of relying on a specific site. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* binutils: Use 2.31.1 by defaultDaniel Engberg2018-10-072-2/+2
| | | | | | Set binutils 2.31.1 as default Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/binutils: Fix u-boot on some armhf platformsDaniel Engberg2018-10-071-0/+276
| | | | | | | | | | Backport commit 3d9c8f6b3f033a6092425b7344647fb51dbed5c6 Without this binutils doesn't properly link u-boot Source: https://sourceware.org/bugzilla/show_bug.cgi?id=23571 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/cmake: Update to 3.12.3Daniel Engberg2018-10-072-14/+2
| | | | | | Update CMake to 3.12.3 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/bison: Update to 3.1Daniel Engberg2018-10-073-6/+4
| | | | | | Update bison to 3.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/fortify-headers: Update to 1.0Daniel Engberg2018-10-071-2/+2
| | | | | | Update fortify-headers to 1.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/libressl: Update to 2.8.1Daniel Engberg2018-10-071-3/+3
| | | | | | Update libressl to 2.8.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mtools: Update to 4.0.19Daniel Engberg2018-10-071-4/+3
| | | | | | Update mtools to 4.0.19 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ubus: update to latest git HEADHans Dedecker2018-10-061-3/+3
| | | | | | | | | | 221ce7e ubusd_acl: event send access list support da503db ubusd_acl: event listen access list support c035bab ubusd_acl: rework wildcard support 73bd847 ubusd_event: move strmatch_len to ubus_common.h 0327a91 ubus/lua: add support for BLOBMSG_TYPE_DOUBLE Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 0.0.20181006Jason A. Donenfeld2018-10-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Account for big-endian 2^26 conversion in Poly1305. * Account for big-endian NEON in Curve25519. * Fix macros in big-endian AArch64 code so that this will actually run there at all. * Prefer if (IS_ENABLED(...)) over ifdef mazes when possible. * Call simd_relax() within any preempt-disabling glue code every once in a while so as not to increase latency if folks pass in super long buffers. * Prefer compiler-defined architecture macros in assembly code, which puts us in closer alignment with upstream CRYPTOGAMS code, and is cleaner. * Non-static symbols are prefixed with wg_ to avoid polluting the global namespace. * Return a bool from simd_relax() indicating whether or not we were rescheduled. * Reflect the proper simd conditions on arm. * Do not reorder lines in Kbuild files for the simd asm-generic addition, since we don't want to cause merge conflicts. * WARN() if the selftests fail in Zinc, since if this is an initcall, it won't block module loading, so we want to be loud. * Document some interdependencies beside include statements. * Add missing static statement to fpu init functions. * Use union in chacha to access state words as a flat matrix, instead of casting a struct to a u8 and hoping all goes well. Then, by passing around that array as a struct for as long as possible, we can update counter[0] instead of state[12] in the generic blocks, which makes it clearer what's happening. * Remove __aligned(32) for chacha20_ctx since we no longer use vmovdqa on x86, and the other implementations do not require that kind of alignment either. * Submit patch to ARM tree for adjusting RiscPC's cflags to be -march=armv3 so that we can build code that uses umull. * Allow CONFIG_ARM[64] to imply [!]CONFIG_64BIT, and use zinc arch config variables consistently throughout. * Document rationale for the 2^26->2^64/32 conversion in code comments. * Convert all of remaining BUG_ON to WARN_ON. * Replace `bxeq lr` with `reteq lr` in ARM assembler to be compatible with old ISAs via the macro in <asm/assembler.h>. * Do not allow WireGuard to be a built-in if IPv6 is a module. * Writeback the base register and reorder multiplications in the NEON x25519 implementation. * Try all combinations of different implementations in selftests, so that potential bugs are more immediately unearthed. * Self tests and SIMD glue code work with #include, which lets the compiler optimize these. Previously these files were .h, because they were included, but a simple grep of the kernel tree shows 259 other files that carry out this same pattern. Only they prefer to instead name the files with a .c instead of a .h, so we now follow the convention. * Support many more platforms in QEMU, especially big endian ones. * Kernels < 3.17 don't have read_cpuid_part, so fix building there. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mt76: fix dependenciesFelix Fietkau2018-10-061-1/+2
| | | | | | | - make kmod-mt76-core hidden - select kmod-mt76-core and kmod-usb-core from mt76-usb Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-10-061-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 053de5c mt76x0: pci: add mt76x0e_cleanup routine c6b1926 mt76x2: move mt76x2 source files to mt76x2 folder 6afb1b8 mt76: fix header guard macro define names 05c7f24 mt76: fix frag length allocation for usb 6856ef6 mt76: usb: fix hw initialization sequence 3d43146 mt76x0: usb: stop cal/mac workqueues at hw stop bef08cc mt76: move mt76x02_tx_get_max_txpwr_adj in mt76x02_util.c cd42111 mt76: add get_tx_txpwr_adj function pointer to mt76_driver_ops c49a3ae mt76: move mt76x02_mac_write_txwi in mt76x02-lib module 4bae980 mt76: usb: use mt76x02u_tx_prepare_skb to fill txwi e0847b4 mt76x0: init: remove unnecessary configurations e802b5c mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c 2742847 mt76: move mt76x02_rx_get_sta and mt76x02_rx_get_sta_wcid in mt76x02_util.h c26f9fd mt76x0: mac: use sta ewma estimation for rssi tracking 330fbe3 mt76x0: remove unused variable in mt76x0_dev a56efc5 mt76x0: remove hw_atomic_mutex mutex in mt76x0_dev abd1daa mt76x2: move mt76x2_dev in mt76x02_util.h d5d1e59 mt76x0: merge mt76x0_dev in mt76x02_dev e236ba5 mt76: move mt76x02_mac_process_rx in mt76x02-lib module 724d547 mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers ec3d829 mt76: move mt76x02_tx in mt76x02-lib module 159f767 mt76: move txrx shared routines in mt76x02_txrx.c 9c874cd mt76: rename mt76x02_util.h in mt76x02.h fd9174f mt76x2: remove leftover function declatarions 608708a mt76: move tpc routines in mt76x02-lib module 45b8f5e mt76: move mt76x02_tx_prepare_skb in mt76x02_txrx.c 9a39521 mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.c 3770c54 mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle 9730290 mt76: move mt76x02_tx_complete in mt76x02-lib module 99e0486 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mmio.c 3d2cfe3 mt76: move tx_tasklet management in mt76x02-lib moudle e61671e mt76: move irq handler in mt76x02-lib moudle d533f13 mt76x0: pci: report firmware version using ethtool Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iw: add iw-full package without size reduction hacksFelix Fietkau2018-10-062-20/+43
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move marvell packaging code to marvell.mkFelix Fietkau2018-10-062-87/+91
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move intel packaging code to intel.mkFelix Fietkau2018-10-062-200/+201
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move realtek packaging code to realtek.mkFelix Fietkau2018-10-062-169/+171
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move broadcom packaging code to broadcom.mkFelix Fietkau2018-10-062-484/+489
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move atheros/qca packaging code to ath.mkFelix Fietkau2018-10-062-270/+278
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: move rt2x00 packaging code to ralink.mkFelix Fietkau2018-10-062-203/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove duplicated lines for building packages, use PKG_DRIVERS insteadFelix Fietkau2018-10-061-78/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: insert blank line after KernelPackage template to allow chaining ↵Felix Fietkau2018-10-061-0/+1
| | | | | | calls to it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package/lldp: don't link against libbsd on !USE_GLIBC buildsAlexander Couzens2018-10-051-0/+3
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: fix pci irq init on kernel 4.14Koen Vandeputte2018-10-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IRQ init structs are marked as __initconst which means this memory can be free after init. On this platform, the PCI IRQ init happens very late _after_ the kernel already freed the memory allocated for these structs. During IRQ allocation, the allocation function is passed with invalid data at this point leading to following error: [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0 [ 2.382828] Freeing unused kernel memory: 264K [ 34.414816] pci 0000:00:00.0: no irq found for pin 1 and [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0 [ 2.125401] Freeing unused kernel memory: 284K [ 9.526479] pci 0000:00:00.0: no irq found for pin 1 After this patch: [ 14.960814] pci 0000:00:00.0: using irq 40 for pin 1 Commit 318e19ba6755 ("ar71xx: add v4.14 support") fixed this for the default targets already present in the source by default but forgot to remove the __initconst attribute for targets QCA953x and QCA956x which are only added later through platform patches. Fixes: 318e19ba6755 ("ar71xx: add v4.14 support") Reported-by: Sven Schönhoff <sven.schoenhoff@gmail.com> Reported-by: Dirk Brenken <dev@brenken.org> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Dirk Brenken <dev@brenken.org>
* kernel: bump 4.14 to 4.14.74Koen Vandeputte2018-10-046-15/+15
| | | | | | | | | | | | | Refreshed all patches. Fixes CVE: - CVE-2018-7755 Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.131Koen Vandeputte2018-10-042-11/+11
| | | | | | | | | | | | | | Refreshed all patches. Fixes CVE: - CVE-2018-10880 - CVE-2018-7755 Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ipset: update to 6.38Syrone Wong2018-10-042-27/+2
| | | | | | dropped already upstream patch Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 23:18:52 +0000