aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* OpenWrt v21.02.0-rc4: adjust config defaultsv21.02.0-rc4Hauke Mehrtens2021-08-015-10/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-3166-150/+151
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: mt76x8: add missing config symbolDavid Bauer2021-07-301-0/+1
| | | | | | PWM_MEDIATEK was not defined, breaking builds for the mt76x8 subtarget. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: move Kconfig symbol to common configDavid Bauer2021-07-304-3/+1
| | | | | | | This is required for all x86 targets. x86-legacy missed this config symbol, breaking the build. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing Kconfig symbolDavid Bauer2021-07-301-0/+2
| | | | | | Fixes build errors for sunxi as well as rockchip targets. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix JT-OR750i switch LED assignmentDavid Bauer2021-07-291-2/+2
| | | | | | | | The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate the LED on port 3 and vice versa. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f0a885ed8636b9762d12f2eb2755f63297ff0cb5)
* ath79: enable missing pinmux for JT-OR750iDavid Bauer2021-07-291-0/+3
| | | | | | | | Without explicit configuration of these pins the ethernet as well as status LED of the device do not work correctly. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4feb9a4211d4c8e118e6b8f01fa0bbd4eab5d35c)
* ath79: add support for Joy-IT JT-OR750iVincent Wiemann2021-07-295-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM * 802.11n 2T2R (external antennas) * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas) * 3x 10/100 LAN, 1x 10/100 WAN * UART header with pinout printed on PCB Installation: * The device comes with a bootloader installed only * The bootloader offers DHCP and is reachable at http://10.123.123.1 * Accept the agreement and flash sysupgrade.bin * Use Firefox if flashing does not work TFTP recovery with static IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server at 192.168.0.66 * Keep the reset button pressed for 4 seconds after connecting power TFTP recovery with dynamic IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server with a DHCP server running at the same address * Keep the reset button pressed for 6 seconds after connecting power Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> (cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655)
* netifd: update to the latest versionFelix Fietkau2021-07-261-3/+3
| | | | | | | 440eb0647708 bridge: fix regression in bringing up bridge ports Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 39f81b0bf687017b4d086255c94166e662ac177e)
* netifd: update to the latest versionFelix Fietkau2021-07-251-3/+3
| | | | | | | | 85f01c44a950 bridge: check bridge port vlan membership on link-up events 17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 2801fe6132c4e2e364e2d5a304594185351b501b)
* glibc: update to latest 2.33 HEAD (bug 28011)Hans Dedecker2021-07-191-2/+2
| | | | | | | | b5711025bc x86_64: Remove unneeded static PIE check for undefined weak diagnostic edfd11197e wordexp: handle overflow in positional parameter number (bug 28011) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 9d2dcc83128a035262bf15b8bbd1f57622465b42)
* glibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)Hans Dedecker2021-07-191-2/+2
| | | | | | | | | | 58b90461ae elf: Use _dl_catch_error from base namespace in dl-libc.c [BZ #27646] 8c06748c51 Fix use of __pthread_attr_copy in mq_notify (bug 27896) 4b6be914bd Use __pthread_attr_copy in mq_notify (bug 27896) f4cba6ca1e dlfcn: Failures after dlmopen should not terminate process [BZ #15271] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit f033d5ad1c28e07eb6de2ce3ea8650dc7080d6d0)
* dnsmasq: distinct Ubus names for multiple instancesEtan Kissling2021-07-191-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, when using multiple dnsmasq instances they are all assigned to the same Ubus instance name. This does not work, as only a single instance can register with Ubus at a time. In the log, this leads to `Cannot add object to UBus: Invalid argument` error messages. Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes behaviour so that instead of the log, dnsmasq exits at start instead. With this patch, all dnsmasq instances are assigned unique names so that they can register with Ubus concurrently. One of the enabled instances is always assigned the previous default name "dnsmasq" to avoid breaking backwards compatibility with other software relying on that default. Previously, a random instance got assigned that name (while the others produced error logs). Now, the first unnamed dnsmasq config section is assigned the default name. If there are no unnamed dnsmasq sections the first encountered named dnsmasq config section is assigned instead. A similar issue exists for Dbus and was similarly addressed. Signed-off-by: Etan Kissling <etan.kissling@gmail.com> [tweaked commit message] dnsmasq was not crashing it is exiting Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit ba5bd8e556b2e7573d27b16e005ba287e066f795)
* kernel: bump 5.4 to 5.4.132Hauke Mehrtens2021-07-1942-131/+131
| | | | | | | | | | | | Manually rebased layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All others updated automatically. Compile-tested on: ramips/mt7621 Runtime-tested on: ramips/mt7621 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: add /tmp/hosts/ to jail_mountNick Hainke2021-07-191-1/+1
| | | | | | | | Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/". If you don't add this to the jail_mount, dnsmasq can't read it anymore. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 3a94c2ca5cf7c11ca150fa3ae884e7be8d07a281)
* odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)Hans Dedecker2021-07-191-3/+3
| | | | | | | bc9d317 dhcpv6-ia: fix invalid preferred lifetime Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 033d5ff25eaf4facbaab09153982e7321fe282e6)
* ipq40xx: fix FRITZRepeater 1200 RGMII delayDavid Bauer2021-07-171-1/+1
| | | | | | | | | | | | | | | When the AVM FRITZ!Repeater 1200 was introduced on Kernel 4.19, the at803x PHY driver incorrectly set up the delays, not disabling delays set by the bootloader. The PHY was always operating with RX as well as TX delays enabled, but with kernel 5.4 and later, the required TX delay is disabled, breaking ethernet operation. Correct the PHY mode, so the driver enables both delays. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f9d18281051c894eacd40f10c10b430c6c9082ad)
* netifd: update to the latest versionFelix Fietkau2021-07-141-3/+3
| | | | | | | 7f24a063475e vlan: fix device vlan alias handling Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d1a812c49b57636efcb9ef6f5f0aff4f11eb6b36)
* mpc85xx: add missing Kconfig symbolsDavid Bauer2021-07-132-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* netifd: update to the latest versionFelix Fietkau2021-07-131-3/+3
| | | | | | | | | | | | | | | | | | | | 61a71e5e49c3 bridge: dynamically create vlans for hotplug members cb6ee9608e10 bridge: fix dynamic delete of hotplug vlans 7f199050f395 wireless: pass the real network ifname to the setup script 50381d0a2998 bridge: allow adding/removing VLANs to configured member ports via hotplug f12b073c0cc3 wireless: add some comments to functions b0d090688302 bridge: fix setting pvid for updated vlans ff3764ce28e0 device: move hotplug handling logic from system-linux.c to device.c 16bff892f415 ubus: add a dummy mode ubus call to simulate hotplug events 7f30b02013f2 examples: make dummy wireless vif names shorter 013a1171e9b0 device: do not treat devices with non-digit characters after . as vlan devices f037b082923a wireless: handle WDS per-sta devices db0fa24e1c17 bridge: fix enabling hotplug-added VLANs on the bridge port 4e92ea74273f bridge: bring up pre-existing vlans on hotplug as well 1f283c654aeb bridge: fix hotplug vlan overwrite on big-endian systems Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 1236cbe30cec8e3e8246237005140596f8611ce9)
* mediatek: add missing config symbolsDavid Bauer2021-07-131-0/+3
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing config symbolsDavid Bauer2021-07-131-0/+11
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* iwinfo: move device info into -data packageJo-Philipp Wich2021-07-112-4/+40
| | | | | | | | | | Backport upstream patch a0a0e02 ("iwinfo: rename hardware.txt to devices.txt") and split devices.txt (former hardware.txt) into a common libiwinfo-data package to allow different libiwinfo versions to coexist without file clashes. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (backported from commit c13d7c82aa4cd2cbf1f61bad857cd01b795318e3)
* build: ensure that dash isn't prepended twice to abi version suffixJo-Philipp Wich2021-07-111-1/+1
| | | | | | | | | | | | | | The ABIV_$(pkgname) variable already is formatted so return it as-is from the GetABISuffix macro and only filter through FormatABISuffix if we read the raw ABI version value from a version stamp file. This ensures that binary intra-package dependencies on ABI versioned libraries are properly formatted. Ref: https://github.com/openwrt/packages/issues/15871 Fixes: f6a03bff5b ("build: prepend ABI suffixes with a dash if package name ends with digit") Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit fbb9b1f8ed0d8a76dd989cc6c16a4e0fda2b6e74)
* build: prepend ABI suffixes with a dash if package name ends with digitJo-Philipp Wich2021-07-112-2/+8
| | | | | | | | | | | Ensure that ABI suffixes are separated with a dash from the package name if the name happens to end with a digit. This implementation detail got lost during the recent refactoring of the ABI_VERSION handling in buildroot. Ref: https://github.com/openwrt/packages/pull/14237#issuecomment-860473585 Fixes: c921650382 ("build: drop ABI version from metadata") Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit f6a03bff5bccdbf9165087bccbb35095903d05c6)
* ath79: add missing MTD_NAND_RB91X symbolKoen Vandeputte2021-07-091-0/+1
| | | | | | | | Looks like the symbol was forgotten for 5.4 Fixes: 820e660cd7 ("ath79: add NAND driver for MikroTik RB91xG series") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 52c27dab1973d523453fc1e319d8636e1cb10927)
* ath79: add missing GPIO_LATCH symbolDavid Bauer2021-07-091-0/+1
| | | | | | | Fixes commit 7b8931678c36 ("ath79: add gpio-latch driver for MikroTik RouterBOARDs") Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f2f137593eb6c0e849352e85c003c91f8be81dd1)
* ath79: mikrotik: fix beeper phantom noise on RB912Koen Vandeputte2021-07-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Analysis done by Denis Kalashnikov: It seems that some ROS versions on some routerboard models have this bug: after silence boot (no output to uart, no beeps) beeper clicks when wireless traffic is. https://forum.mikrotik.com/viewtopic.php?f=3&t=92269 https://forum.mikrotik.com/viewtopic.php?t=63399 From these links: 1) Hello, I have RB951G-2HnD and I noticed strange thing when I loaded the device with some wireless traffic it produced strange sound - like hissing, fizzing etc. 2) Same problem still on 6.33, with silent boot enabled I hear buzzing noise on wireless load. 3) The sound is fixed in v5.19, it was a bug that caused beeper to make clicks. It also got fixed in RouterOS: * What's new in 5.19 (2012-Jul-16 10:51): fix ticking sound on RB411UAHL; * What's new in 6.38.3 (2017-Feb-07 09:52): rb3011 - fixed noise from buzzer after silent boot; I've checked with an oscilloscope that: * When on the ssr beeper pin is 0, on the beeper itself is 1 (~5V), and when on the ssr beeper pin is 1, on the beeper is 0 The beeper doesn't consume power, so 1 should be a default/idle value for the ssr beeper pin). * When there is wireless traffic (ping packets) in the background and the beeper clicks, I see pulses on the beeper itself, but no pulses on the ssr beeper pin (Q5 pin of 74hc595). When I manually toggle the ssr beeper pin I see pulses on both. So, it is likely that the phantom beeper clicks are caused by the EMI. Suggested-by: Denis Kalashnikov <denis281089@gmail.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit a58bcc9e673db3c6aa39f2089d216d51c8356418)
* ath79: ar934x: fix mounting issues if subpage is not supportedKoen Vandeputte2021-07-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the option to disable subpage writing is only set when a HW ECC engine is used. Some boards lack a HW ECC engine and use software for that. In this case, this NAND option does not get set when the NAND chip does not support it, resulting in mounting errors. Move the setting of this option to a generic init location so it gets set for all types where required. While at it, also OR the option instead of just setting it so we don't overwrite potential flags being set somewhere else. Before: [ 1.681273] UBI: auto-attach mtd2 [ 1.684669] ubi0: attaching mtd2 [ 1.688877] ubi0 error: validate_ec_hdr: bad VID header offset 2048, expected 512 [ 1.696469] ubi0 error: validate_ec_hdr: bad EC header [ 1.701712] Erase counter header dump: [ 1.705512] magic 0x55424923 [ 1.709322] version 1 [ 1.712330] ec 1 [ 1.715331] vid_hdr_offset 2048 [ 1.718610] data_offset 4096 [ 1.721880] image_seq 1462320675 [ 1.725680] hdr_crc 0x12255a15 After: 1.680917] UBI: auto-attach mtd2 [ 1.684308] ubi0: attaching mtd2 [ 2.954504] random: crng init done [ 3.142813] ubi0: scanning is finished [ 3.163455] ubi0: attached mtd2 (name "ubi", size 124 MiB) [ 3.169069] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 3.176037] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.182942] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.190013] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0 [ 3.196102] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 3.203434] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1462320675 [ 3.212700] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20 [ 3.222124] ubi0: background thread "ubi_bgt0d" started, PID 317 [ 3.230246] block ubiblock0_1: created from ubi0:1(rootfs) [ 3.235819] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem [ 3.256830] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry-picked from commit 6561ca1fa510003a19ea7f8800535f12e5098ce2)
* ath79: add support for MikroTik RouterBOARD 912UAG-2HPnDDenis Kalashnikov2021-07-095-0/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been supported in the ar71xx. Links: * https://mikrotik.com/product/RB912UAG-2HPnD * https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb912uag-2hpnd This also supports the 5GHz flavour of the board. Hardware: * SoC: Atheros AR9342, * RAM: DDR 64MB, * SPI NOR: 64KB, * NAND: 128MB, * Ethernet: x1 10/100/1000 port with passive POE in, * Wi-Fi: 802.11 b/g/n, * PCIe, * USB: 2.0 EHCI controller, connected to mPCIe slot and a Type-A port -- both can be used for LTE modem, but only one can be used at any time. * LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED, Ethernet phy LED, * Button, * Beeper. Not working: * Button: it shares gpio line 15 with NAND ALE and NAND IO7, and current drivers doesn't easily support this configuration, * Beeper: it is connected to bit 5 of a serial shift register (tested with sysfs led trigger timer). But kmod-gpio-beeper doesn't work -- we left this as is for now. Flashing: * Use the RouterBOARD Reset button to enable TFTP netboot, boot kernel and initramfs and then perform sysupgrade. * From ar71xx OpenWrt firmware run: $ sysupgrade -F /tmp/<sysupgrade.bin> For more info see: https://openwrt.org/toh/mikrotik/common. Co-Developed-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 695a1cd53ca52c678b3f837deb1bf30204285360)
* ath79: add NAND driver for MikroTik RB91xG seriesDenis Kalashnikov2021-07-093-0/+397
| | | | | | | | | | | | | | Main part is copied from ar71xx original driver rb91x_nand written by Gabor Juhos <juhosg@openwrt.org>. What is done: * Support of kernel 5.4 and 5.10, * DTS support, * New gpio API (gpiod_*) support. Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 820e660cd7463aa6d5ed9d31baf0f3c35596ce57)
* ath79: add gpio-latch driver for MikroTik RouterBOARDsDenis Kalashnikov2021-07-092-0/+226
| | | | | | | | | | | | | This is a slighty modified version of ar71xx gpio-latch driver written by Gabor Juhos <juhosg@openwrt.org>. Changes: * DTS support, * New gpio API (gpiod_*). Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com> (cherry-picked from commit 7b8931678c36c8d8c333b446258a653b1358bf70)
* hostapd: make wnm_sleep_mode_no_keys configurableTimo Sigurdsson2021-07-052-4/+8
| | | | | | | | | | | | | | | In the aftermath of the KRACK attacks, hostapd gained an AP-side workaround against WNM-Sleep Mode GTK/IGTK reinstallation attacks. WNM Sleep Mode is not enabled by default on OpenWrt, but it is configurable through the option wnm_sleep_mode. Thus, make the AP-side workaround configurable as well by exposing the option wnm_sleep_mode_no_keys. If you use the option wpa_disable_eapol_key_retries and have wnm_sleep_mode enabled, you might consider using this workaround. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [bump PKG_RELEASE] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit bf98faaac8ed24cf7d3d93dd4fcd7304d109363b)
* hostapd: make country3 option configurableTimo Sigurdsson2021-07-052-3/+4
| | | | | | | | | | | | | The country3 option in hostapd.conf allows the third octet of the country string to be set. It can be used e.g. to indicate indoor or outdoor use (see hostapd.conf for further details). Make this option configurable but optional in OpenWrt. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> [bump PKG_RELEASE, rebase] Signed-off-by: Paul Spooren <mail@aparcar.org> (cherry picked from commit 9f09c1936a4a13b67fcba632f7ca02331f685359) Signed-off-by: Paul Spooren <mail@aparcar.org>
* ltq-deu: Mark lantiq DEU brokenHauke Mehrtens2021-07-023-11/+6
| | | | | | | | | | | | | | | | | | | | | When the ltq_deu_vr9 kernel module is loaded, hostapd does not start any more. It fails with this error message: daemon.err hostapd: nl80211: kernel reports: key addition failed daemon.err hostapd: Interface initialization failed OpenWrt uses the standard Linux crypto API in the wifi drivers now and this probably makes the system offload more crypto operations to special hardware like the Lantiq DEU. There is probably a bug in the DEU and these operations fail and then hostapd does not start the interface. Do not include the Lantiq DEU by default any more. Fixes: FS#3901 Fixes: 53b6783907f3 ("mac80211: remove patches stripping down crypto support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Notupus <notpp46@gmail.com> (cherry-picked from commit 964863bb23999a1fae99b883053cc4f3c5c42b40)
* iwinfo: build with nl80211 backend only and make sharedJo-Philipp Wich2021-07-021-19/+5
| | | | | | | | | | | | Drop support for building the obsolete broadcom-wl backend and always forcibly enable the nl82011 support. This allows us to make the package shared again since no target specific compilation is happening anymore. This will solve various repository coherency issues related to unavailable libiwinfo versions in the long run. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 5a1065758b88b568a04a50189400321601904bdf)
* treewide: unmark selected packages nonsharedPetr Štetiar2021-07-026-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts changes done in commit 72cc44958ef4 ("treewide: mark selected packages nonshared") as it removes the nonshared flag, but keeps the PKG_RELEASE as the PKG_RELEASE bump while adding nonshared flag was incorrect. Unmark uci, ubus, libubox, lua, libnl-tiny and libjson-c as nonshared packages as this fix attempt didn't worked out. Currently the imagebuilder is broken again: openwrt-imagebuilder-21.02.0-rc3-ipq40xx-generic.Linux-x86_64$ make image PROFILE=avm_fritzbox-7530 PACKAGES=luci-ssl-openssl ... Collected errors: * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for luci-mod-status * pkg_hash_fetch_best_installation_candidate: Packages for luci-mod-status found, but incompatible with the architectures configured * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for rpcd-mod-iwinfo * pkg_hash_fetch_best_installation_candidate: Packages for rpcd-mod-iwinfo found, but incompatible with the architectures configured * satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-ssl-openssl: * libiwinfo20210430 * opkg_install_cmd: Cannot install package luci-ssl-openssl. Everything because iwinfo's ABI was changed two times since rc3 release: +IWINFO_ABI_VERSION:=20210430 +IWINFO_ABI_VERSION:=20210420 Since iwinfo is marked as nonshared, it wasn't built by phase2 builders, but luci-mod-status was already updated 2 times since rc3 and was thus rebuilt by phase2 builders: d1d452ed2fb3 luci-mod-status: don't set '-' hostname when creating static lease 95b3633055c1 luci-mod-status: switch to html table for wlan channel analysis So now luci-mod-status depends on libiwinfo20210430 but only libiwinfo20210106 can be downloaded. This is first part of the fix, in the upcoming commit Jo is going to remove nonshared flag from iwinfo package as well. References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035736.html References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035741.html Acked-by: Jo-Philipp Wich <jo@mein.io> Reported-by: Nick Hainke <vincent@systemli.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 8307da3dbdaff13d5ce99f8aefa32f5b7a2e18e6)
* ath10k-ct: fix typo in MakefileMichael Yartys2021-07-021-1/+1
| | | | | | | Add forgotten colon to Makefile. Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit f0f1d68d528402b4d51a1dd08d2e2c9034167f92)
* ath10k-ct: update to latest versionMichael Yartys2021-07-024-45/+8
| | | | | | | | | | | | | | | | | Changelog: - ath10k-ct: Add security fixes. - ath10k-ct: Add 5.12 kernel version. - ath10k-ct: Fix the beacon/mcast/bcast override issue - ath10k-ct 5.7: Fix setting mcast/bcast/beacon rate from debugfs. - ath10k-ct: Add 5.11 driver. Delete upstreamed patch and refresh the rest. Also, use the opportunity to set PKG_RELEASE to $(AUTORELEASE). Runtime-tested on ipq806x (Netgear R7800). Signed-off-by: Michael Yartys <michael.yartys@protonmail.com> (cherry picked from commit 2e10ed925e1e07c28570731a429efa5e7de3b826)
* kernel/modules: move act_gact into kmod-sched-coreDENG Qingfang2021-07-021-2/+2
| | | | | | | | As the name suggests, act_gact has the generic actions such as dropping and accepting packets, so move it into kmod-sched-core. Signed-off-by: DENG Qingfang <dqfext@gmail.com> (cherry-picked from commit 10aacb9a6ce3445cdee39573f4120e7888beb022)
* package/comgt: Handle bind/unbind eventsArjun AK2021-07-021-0/+2
| | | | | | | | | | | | | | This script was expecting only add/remove events which has not been the case since Kernel 4.12 (which added bind/unbind). Bind events were getting treated as remove events which would cause hotplugged 3g modems to not work. More info: https://lkml.org/lkml/2018/12/23/128 https://github.com/systemd/systemd/issues/8221 Signed-off-by: Arjun AK <arjunak234@gmail.com> (cherry picked from commit 89ef883b92b3a87d9ab1bd289de26b9e72681dac)
* ubus: update to the latest versionFelix Fietkau2021-06-301-3/+3
| | | | | | 4fc532c8a55b ubusd: fix tx_queue linked list usage Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: wifi: tidy up the reconf codeBob Cantor2021-06-301-1/+2
| | | | | | | | | | | | | commit 5edbd390d321532d9a697d6895a1a7c71c40bd5d rearranged the "wifi up" code. This commit tidies up the "wifi reconf" code so as to keep it aligned with the "wifi up" code. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit e8b54296092118fbef75de796d57799cc6c7b927)
* base-files: wifi: swap the order of some ubus callsBob Cantor2021-06-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | "/sbin/wifi up" makes three ubus calls: 1. ubus call network reload 2. ubus call network.wireless down 3. ubus call network.wireless up The first and third ubus calls call drv_mac80211_setup, while the second ubus call triggers wireless_device_setup_cancel, so the call sequence becomes, 1. drv_mac80211_setup 2. wireless_device_setup_cancel 3. drv_mac80211_setup This commit swaps the order of the first two ubus calls, 1. ubus call network.wireless down 2. ubus call network reload 3. ubus call network.wireless up Consequently drv_mac80211_setup is only called once, and two related bugs (#FS3784 and #FS3902) are no longer triggered by /sbin/wifi. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit b82cc8071366b8e96904a1b52af503442069b20d)
* mac80211: print an error if wifi teardown failsBob Cantor2021-06-301-0/+4
| | | | | | | | | | drv_mac80211_teardown fails silently if the device to be torn down is not defined. This commit prints an error message. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit 3933e29d1b87c713167cf4730b68e5f18af4f140)
* mac80211: always call wireless_set_data (FS#3784)Bob Cantor2021-06-301-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When wifi is turned off, drv_mac80211_teardown sometimes fails (silently) because the device to be torn down is not defined. This situation arises if drv_mac80211_setup was called twice when wifi was turned on. This commit ensures that the device to be torn down is always defined in drv_mac80211_teardown. Steps to reproduce: 1) Use /sbin/wifi to turn on wifi. uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi 2) Use /sbin/wifi to turn off wifi. uci set wireless.@wifi-device[0].disabled=1 uci commit wifi 3) Observe that wifi is still up. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit d515f6b6cde357bf480d32a7387f07ea40e85e52)
* mac80211: fix no_reload logic (FS#3902)Bob Cantor2021-06-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If drv_mac80211_setup is called twice with the same wifi configuration, then the second call returns early with error HOSTAPD_START_FAILED. (wifi works nevertheless, despite the fact that setup is incomplete. But "ubus call network.wireless status" erroneously reports that radio0 is down.) The relevant part of drv_mac80211_setup is, if [ "$no_reload" != "0" ]; then add_ap=1 ubus wait_for hostapd local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")" ret="$?" [ "$ret" != 0 -o -z "$hostapd_res" ] && { wireless_setup_failed HOSTAPD_START_FAILED return } wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1 fi This commit sets no_reload = 0 during the second call of drv_mac80211_setup. It is perhaps worth providing a way to reproduce the situation where drv_mac80211_setup is called twice. When /sbin/wifi is used to turn on wifi, uci set wireless.@wifi-iface[0].disabled=0 uci set wireless.@wifi-device[0].disabled=0 uci commit wifi /sbin/wifi makes the following ubus calls, ubus call network reload ubus call network.wireless down ubus call network.wireless up The first and third ubus calls both call drv_mac80211_setup, while the second ubus call triggers wireless_device_setup_cancel. So the call sequence becomes, drv_mac80211_setup wireless_device_setup_cancel drv_mac80211_setup In contrast, when LuCI is used to turn on wifi only a single call is made to drv_mac80211_setup. branches affected: trunk, 21.02 Signed-off-by: Bob Cantor <coxede6557@w3boats.com> (cherry-picked from commit a29ab3b79affb62fda82e0825ed811eaf482dd3c)
* mac80211: backport fix for nl80211 control port tx (fixes FS#3857)Felix Fietkau2021-06-307-17/+133
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit de499573006ab4f32ded9fd66a62ec5e0c183e8a)
* mac80211: add support for 802.3 encap offload with software rate controlFelix Fietkau2021-06-301-0/+119
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit f2c6d892cacb5d884bdd638bc7574c1ee98514a5)
* mac80211: improve rate control performanceFelix Fietkau2021-06-304-1/+353
| | | | | | | | | | | | Call rate control handler after intermediate queueuing Includes follow-up fixes Signed-off-by: Felix Fietkau <nbd@nbd.name> cherry-picked from commits: - 7dd8829ef915f1c5fc728be8f8360c61ddaadf1b - a603e82dd342680d584c4eb5f1b222e056379890 - 8bb4437c01ca35a5ac67e391630a1b24cb52dbb7
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 09:43:43 +0000