aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ag71xx: Move timestamp struct member outside of struct.Rosen Penev2018-02-282-4/+3
| | | | | | | | | | | | | | | With this change, the timestamp variable is only used in ag71xx_check_dma_stuck. Small tx speedup. Based on a Qualcomm commit. ag->timestamp = jiffies was not replaced with netif_trans_update(dev) because of this quote: It should be noted that after this series several instances of netif_trans_update() are useless (if they occur in .ndo_start_xmit and driver doesn't set LLTX flag -- stack already did an update). From: http://lists.openwall.net/netdev/2016/05/03/87 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: kmod-geneve: kmod for Geneve tunnelingYousong Zhou2018-02-281-0/+23
| | | | | | This will be required for Open vSwitch geneve tunneling support Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: fix spurious IRQ7 events when using perf on 4.14Felix Fietkau2018-02-271-0/+15
| | | | | | | | | | | | | Upstream handling of MIPS CPU IRQs is rather hackish and the interrupts are being enabled unconditionally in various places because of legacy code. Performance counter events are routed both through the GIC and through legacy CPU IRQ7 events, causing spurious interrupts. Fix this by disabling IRQ7 when trying to access the performance counter IRQ. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: fix fallback code for picking status LEDRafał Miłecki2018-02-271-1/+1
| | | | | | | | Looking for a wrong LED file name was stopping this code from find any LED. This affects devices with only a red/amber power LED. Fixes: 3aaee1ba023ac ("bcm53xx: failsafe support") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: support DHCP sendopts as list optionsHans Dedecker2018-02-272-6/+8
| | | | | | | | | | | Support config in the form of .... add_list sendopts=router:10.10.10.2 add_list sendopts=nissrv:20.20.20.2 add_list sendopts=0x7D:abba This allows to configure sendopts having white spaces as option value Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ramips: improve NAPI polling to increase GRO batch size" (fixes FS#1333)Felix Fietkau2018-02-271-13/+16
| | | | | | This reverts commit 968b8616127a52fe5baff20a1f29ff49ade26bc2. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain: fix selecting older gcc versions for x86Felix Fietkau2018-02-271-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: m25p80: allow fallback from spi_flash_read to regular SPI transferFelix Fietkau2018-02-266-7/+79
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gcc: merge upstream fix for PR 83496 (fixes FS#814)Felix Fietkau2018-02-261-0/+136
| | | | | | This bug was causing miscompiled code related to branch delay slots Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gcc: refresh patches for version 7.3.0Felix Fietkau2018-02-265-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: fix compile with kernel 3.18Hauke Mehrtens2018-02-261-0/+40
| | | | | | This fixes a compile bug found by build bot with kernel 3.18 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: generic: add 4.14 config optionHans Dedecker2018-02-261-0/+1
| | | | | | | | When CGROUPS is enabled the new option CONFIG_CGROUP_NET_CLASSID is selectable and not handled. Add this option to the 4.14 kernel configuration. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: package efivarfs moduleAlif M. Ahmad2018-02-261-0/+16
| | | | | | | | With this, `mount -t efivarfs` is available and tools such as efitools and efibootmgr will be usable. Signed-off-by: Alif M. Ahmad <alive4ever@live.com> [daniel@makrotopia.org: some whitespace fixes, match From: with SoB]
* sunxi: Add support for Xunlong Orange Pi PCVitalij Alshevsky2018-02-261-0/+10
| | | | | | | | | | | | | | CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 Onboard header pinout: SPI, I2C, 1-WIRE USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
* uboot-sunxi: add Xunlong Orange Pi PCVitalij Alshevsky2018-02-261-0/+7
| | | | Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
* mwlwifi: add and use individual firmware packagesJohnny S. Lee2018-02-263-8/+45
| | | | | | | | | | | | | | | | | | | | | | | | As each mvebu device only uses one of the firmwares provided by mwlwifi package, it makes sense to put them in separate packages and only install the one that is needed. Current mwlwifi version's firmware sizes and usages by devices: 88W8864.bin 118776 caiman, mamba, cobra, shelby 88W8897.bin 489932 (none) 88W8964.bin 449420 rango Changes by this commit: * indicate in title that mwlwifi also is driver for 88W8897 and 88W8964 * remove mwlwifi package's firmware installation rules * add 3 new individual firmware packages (all depends on kmod-mwlwifi): - mwlwifi-firmware-88w8864 - mwlwifi-firmware-88w8897 - mwlwifi-firmware-88w8964 * add firmware package to mvebu devices' DEVICE_PACKAGES accordingly Signed-off-by: Johnny S. Lee <_@jsl.io> [Add the used FW files to the PACKAGES of default image] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* scripts/metadata.pm: allow group-only Require-User specsMatthias Schiffer2018-02-261-2/+4
| | | | | | | | /lib/functions.sh can deal with Require-User specifications that only contain a group, but no user. Adjust metadata.pm to allow such specifications as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mvebu: add missing patch for reprobing SFP phys for 4.14Jonas Gorski2018-02-251-0/+98
| | | | | | | Add the patch for reprobing phys also for 4.14, as it is still needed. Fixes: 4ccad922293a ("mvebu: Add support for kernel 4.14") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mvebu: fix SFP insert detection GPIO name on 4.14Jonas Gorski2018-02-251-1/+1
| | | | | | | | | When SFP support was accepted upstream, the expected GPIO names were slightly changed, breaking SFP insert detection. Update the DTS file to the expected name to make SFP work again. Fixes: 4ccad922293a ("mvebu: Add support for kernel 4.14") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: more fixes for flow offloadFelix Fietkau2018-02-254-21/+84
| | | | | | | - fix TCP connection state - fix checksum error on DNAT Signed-off-by: Felix Fietkau <nbd@nbd.name>
* perf: restrict libunwind dependency to archs that actually support libunwindMatthias Schiffer2018-02-251-1/+1
| | | | | | | | | | Allow building perf on uncommon targets again. Depending on the kernel version, not all of these archs will actually use libunwind in perf. Still, it seems simpler and less error-prone to use the same list that is defined in the libunwind package. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* libunwind: fix build with musl on PPCMatthias Schiffer2018-02-251-0/+383
| | | | | | | | | | | Works around two incompatiblities between glibc and (POSIX-compliant) musl: - missing register definitions from asm/ptrace.h - non-POSIX-compliant ucontext_t on PPC32 with glibc Compile tested on mpc85xx. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: fix crash in flow offload code when cleaning up unregistered hooksFelix Fietkau2018-02-251-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove nf_flow_table hardware offload patch (it is not ready yet)Felix Fietkau2018-02-256-577/+10
| | | | | | | It also does not have any users yet. It will be addde back when the core API issues have been sorted out Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add minimal TCP state tracking to flow offload supportFelix Fietkau2018-02-255-0/+293
| | | | | | Fixes issues with connections hanging after >30 seconds idle time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: do not register ubus objects for mesh interfacesFelix Fietkau2018-02-241-0/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcp6c: rework sendopts handlingHans Dedecker2018-02-242-7/+6
| | | | | | Bring logic of sendopts handling in line with ip6prefix handling Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: support multiple additional user prefixesJo-Philipp Wich2018-02-243-6/+13
| | | | | | | | | | | | | Support configuration in the form... list ip6prefix 2001:db8:1234::/64 list ip6prefix 2001:db8:5678::/64 ... to allow specifying multiple additional IPv6 prefixes. Implements feature request FS#1361. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ethtool: import from packages, add myself as maintainerFelix Fietkau2018-02-241-0/+59
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: mt7621: add Mediatek AP-MT7621A-V60 EVB supportRoman Yeryomin2018-02-244-0/+137
| | | | | | | | | | | | | | | | | | | | This board has: - mt7621 SoC - 8MB SPI flash - 128MB RAM - 5x ethernet ports from internal (SoC) switch - 1x ethernet port sitting on gmac2 and IC+ phy (not yet supported) - 3x PCIe slots - 1x USB 2.0 and 1x USB 3.0 - sound based on wm8960 - SDXC card slot (full size) First fw write from interactive u-boot menu, interrupt with 2. After that sysupgrade. Tested both with 4.9 and 4.14 Signed-off-by: Roman Yeryomin <roman@advem.lv>
* ramips: remove chunked-io patch and set spi->max_transfer_size insteadFelix Fietkau2018-02-248-188/+55
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: optimize for performance by default starting with 4.14Felix Fietkau2018-02-247-2/+14
| | | | | | Keep size optimizations for smaller targets that already switched Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: generic: Fix skip GRO for foreign MAC address patchesHauke Mehrtens2018-02-242-4/+18
| | | | | | | | | | | | | Somewhere in the kernel 4.9 migration process it looks like this patch was broken. The update should be done when a device is added to the bridge and when it gets removed, currently it is only done on the remove path twice which does not make any sense. I do not have a setup to test this now so this is only compile tested. Fixes: f791fb4af450 ("kernel: add linux 4.9 support") Fixes: b3f95490b9be ("kernel: generic: Add kernel 4.14 support") Reported-by: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: add lscpu packageTomasz Moń2018-02-241-0/+16
| | | | | | lscpu is used by lxc-debian template. Signed-off-by: Tomasz Moń <desowin@gmail.com>
* samba36: fix build (issue #5574)Jakub Tymejczyk2018-02-241-0/+1
| | | | | | | | | | | | As indicated in #5574 samba fails to build with linker error due to lack of talloc_* functions when the packet libtalloc also gets build. According to Makefile it is compiled with "--without-libtalloc" option. Running ./configure --help shows that there is another option connected to libtalloc: --enable/disable-external-libtalloc. Adding this option fixes build. Signed-off-by: Jakub Tymejczyk <jakub@tymejczyk.pl>
* iproute2: Add support for ports in xfrm on SCTPHauke Mehrtens2018-02-241-18/+0
| | | | | | | | Remove this old patch which prevents showing the xfrm ports for SCTP This was added in commit 60c1f0f64d23 ("finally move buildroot-ng to trunk") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, improves performance and fixes tx power ↵Felix Fietkau2018-02-241-3/+3
| | | | | | | | | issues 62d52e9 mt76: set RX_FLAG_DUP_VALIDATED for A-MPDU reordered packets 5ba5995 mt76x2: rework tx power handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: update to 1.6.2Ansuel Smith2018-02-231-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 459b6932 policy: add nft translation for simple policy none/strict use case 255e55b7 tests: xlate-test: no need to require superuser privileges 6990bbc5 extensions: hashlimit: remove space before burst in translation to nft 13ecaeb0 extensions: hashlimit: Rename 'flow table' keyword to meter c252a2b0 extensions: Add test for cluster nft translation bda1daa4 extensions: ip6t_{S,D}NAT: add more tests 88fa4543 extensions: ip6t_{S,D}NAT: multiple to-dst/to-src arguments not reported 64a0e098 extensions: libxt_cluster: Add translation to nft 6067208f extensions: add support for 'srh' match 0f387b07 extensions: hashlimit: fix incorrect burst in translations 1ffe6a74 extensions: libxt_hashlimit: Do not print default timeout and burst 27de281d extensions: Add macro _DEFAULT_SOURCE. 75364151 iptables: Remove const qualifier from struct option. 8b0da213 iptables: masquerade: add randomize-full support e64db006 iptables: patch to correct linker flag sequence 033eac81 extensions: libxt_tcpmss: Add test case for invalid ranges. 505bfa11 iptables: xtables-eb: Remove const qualifier from struct option a6d6821a iptables: extensions: Fix MARK target help 71de414c libxt_sctp: fix array out of range in print_chunk 1a32381a extensions: add tests for ipcomp protocol 4bd51770 tests: xlate: print output in same way as nft-test.py d0e3d95f libxt_recent: Remove ineffective checks for info->name 23e6ed71 libxt_TOS: add tests for translation infrastructure 9564595e Update .gitignore bebce197 iptables: iptables-compat translation for TCPMSS dbbab0aa extensions: libxt_tcpmss: Detect invalid ranges 0e958281 iptables-translate: add test file for TCPMSS extension de3c68b6 iptables-compat: do not allow to delete populated user define chains f4b80ce7 iptables: change large file support handling f5b46c2f iptables: Constify option struct 21ba5b38 ip{,6}tables-restore: Don't accept wait-interval without wait 60e0ffd3 ip{,6}tables-restore: Don't ignore missing wait-interval value af468b6e utils: Add a man page for nfnl_osf 1773dcaa utils: nfnl_osf: Fix synopsis in help text 895ce096 extensions: libxt_bpf: fix missing __NR_bpf declaration 3c633296 xtables-compat-restore: fix translation of mangle's OUTPUT 1c32e560 netfilter: xt_hashlimit: add rate match mode b5331f88 xtables-compat: fix memory leak when listing 91ae12e3 xtables-compat-restore: fix several memory leaks 79e1edd1 iptables-xml: Fix segfault on jump without a target c49a93f1 xtables-translate: fix double space before comment 79fa7cc2 libip6t_icmp6: xlate: remove leftover space 8e62f572 tests: xlate: generalize owner 8d994bcf iptables: Add file output option to iptables-save f8e5ebc5 iptables: Fix crash on malformed iptables-restore 80d8bfaa iptables: insist that the lock is held. c29d99c8 libxtables: Display weird character warning for wildcards 1fe96cfb tests: xlate: check if it is being run as root 3f92b259 tests: xlate: remove python 3.5 dependency d89dc47a iptables-restore/save: exit when given an unknown option 65801d02 iptables-restore.8: document -w/-W options 9cd3adbe iptables-restore/ip6tables-restore: add --version/-V argument 1ec1fb7a extensions: libxt_hashlimit: fix 64-bit printf formats 27f69f4a iptables: extensions: Remove typedef in struct. 340105fa tests: add regression tests for xtables-translate b669e184 extensions: libxt_TOS: Add translation to nft b2a84476 iptables: Remove unnecessary braces. 2963a8df iptables: Remove explicit static variables initalization. 1cf4ba6f iptables: Constify option struct 999eaa24 iptables-restore: support acquiring the lock. 6e2e169e iptables: remove duplicated argument parsing code 836846f0 iptables: move XT_LOCK_NAME from CFLAGS to config.h. b91af533 iptables: set the path of the lock file via a configure option. 0e94eb2e iptables-translate: print nft iff there are more expanded rules to print 48ad179b libxtables: abolish AI_CANONNAME 9f50bbdf libxtables: remove unnecessary nesting from host_to_ip(6)addr c6df55d6 iptables-translate: print nft command for each expand rules via dns names 82dacbb8 xtables-translate: Avoid querying the kernel 9f972f45 extensions: libxt_addrtype: Add translation to nft 2c8e251e utils: nfsynproxy: fix build with musl libc 9b8cb756 libiptc: don't set_changed() when checking rules with module jumps eb66632d extensions: libxt_hashlimit: Add translation to nft 72bb3dbf xshared: using the blocking file lock request when we wait indefinitely 24f81746 xshared: do not lock again and again if "-w" option is not specified fc3c3b4e libxt_hashlimit: add new unit test to catch kernel bug 516d9191 iptables: update pf.os Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: sync fast-rx patch with updated versionFelix Fietkau2018-02-232-20/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix various issues with fast-rx modeFelix Fietkau2018-02-235-2/+153
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* octeontx: use the generic board detectionMathias Kresin2018-02-232-45/+1
| | | | | | | Use the generic board detection based on the device tree compatible string instead of a target specific one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: enable power LED and second uart on GL-MT300N-V2Benjamin Valentin2018-02-232-2/+12
| | | | | | | | | The device has a second uart accessible via pin headers, so enable it. There is also a green power led which was not enabled previously. Enable it too and use it as status LED. Signed-off-by: Benjamin Valentin <benjamin.valentin@volatiles.de>
* mediatek: disable missing kernel symbolMathias Kresin2018-02-231-0/+1
| | | | | | | This caused v4.14.20 based builds so fail on mediatek. Fixes: 6112abf186bf ("kernel: enable CONFIG_USB_PCI for PCI usb modules"). Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: nand remove obsolete kernel config symbolMathias Kresin2018-02-231-1/+0
| | | | | | | | | | | | | | | | | | The missing CONFIG_USB_XHCI_PCI dependency on CONFIG_USB_PCI of the µPD720201 xhci-pci(e) usb 3.0 chip used by the WNDR4700 was fixed with 6112abf186bf ("kernel: enable CONFIG_USB_PCI for PCI usb modules"). Commit c38fb585763f ("kernel: fix disabling common usb quirks on 4.14") finally fixed the following build error: drivers/usb/host/xhci-pci.c: In function 'xhci_pci_probe': drivers/usb/host/xhci-pci.c:749:6: error: implicit declaration of function 'usb_xhci_needs_pci_reset' [-Werror=implicit-function-declaration] if (usb_xhci_needs_pci_reset(dev)) { Hence the CONFIG_USB_PCI symbol isn't required any longer in target kernel config. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-envtools: add support for ALFA Network AWUSFREE1Piotr Dymacz2018-02-221-6/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: add support for ALFA Network AWUSFREE1Piotr Dymacz2018-02-226-20/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628. Specification: - MT7628AN (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203) - 2x detachable antennas (RP-SMA) - ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0) - 4x LED (2 driven by GPIO) - 1x button (reset) - 1x mini USB for host and main power input - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot: 1. Power device with reset button pressed and release it after ~5 sec. 2. Setup static IP 192.168.1.2/4 on your PC. 3. Go to 192.168.1.1 in browser and upload "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for GainStrong Oolite V5.2Piotr Dymacz2018-02-2213-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: rework GainStrong devices supportPiotr Dymacz2018-02-2215-233/+170
| | | | | | | | | - combine support for Oolite/MiniBox V1.0 in single mach-*.c file - fix model/board names - include correct/full vendor name - drop redundant package and factory image Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: cosmetic cleanups in 04_led_migrationPiotr Dymacz2018-02-221-26/+8
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: base-files: drop comment from 02_networkPiotr Dymacz2018-02-221-1/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:19:31 +0000