aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-11-227-6/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-11-222-0/+2
| | | | | | Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c0f40781645297ad68678e3de2557b611e9f785c) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-11-221-3/+3
| | | | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 36f43b61a74ff12d75989d0aabe052945aacc8cf) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: update to version 4.19.85Hauke Mehrtens2019-11-2218-421/+76
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* layerscape: Fix kernel patchHauke Mehrtens2019-11-221-1/+1
| | | | | | | The kernel update added one "+" too much. Fixes: db345220b485 ("kernel: bump 4.14 to 4.14.155") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing configuration optionHauke Mehrtens2019-11-221-0/+1
| | | | | | | | This was found by the build bot. Fixes: db345220b485 ("kernel: bump 4.14 to 4.14.155") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 103e49f62e72664ee0d5285007907a75960e8645)
* firewall: update to latest Git HEADJo-Philipp Wich2019-11-221-3/+3
| | | | | | | | 8174814 utils: persist effective extra_src and extra_dest options in state file 72a486f zones: fix emitting match rules for zones with only "extra" options Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 482114d3f78df2a19904cc8edf7d9adcfdbb8625)
* firewall: update to latest git HEADHans Dedecker2019-11-221-3/+3
| | | | | | | daed0cf utils: fix resource leak Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 27bf8abe69f3b048cbcbf9d2e796ecba5f0a42e7)
* cns3xxx: use proper macros for defining partition regionsKoen Vandeputte2019-11-221-6/+8
| | | | | | | | While at it, also reorder the items for improved readability. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> (cherry picked from commit 6b2f953db346cfb4ddf05654efa3ad7eb84ed99f)
* kernel: bump 4.14 to 4.14.155Koen Vandeputte2019-11-2229-204/+99
| | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 707-dpaa-ethernet-support-layerscape.patch Remove upstreamed: - 034-v4.20-MIPS-BCM47XX-Enable-USB-power-on-Netgear-WNDR3400v3.patch - 001-4.21-01-BCM63XX-fix-switch-core-reset-on-BCM6368.patch - 073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* wireless-regdb: fix build when python2 from package feeds existsPetr Štetiar2019-11-221-1/+1
| | | | | | | | | | | | | | | | wireless-regdb fails to build if there is python2 installed from package feeds, as staging_dir/hostpkg/bin/python is python2 and staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin (proper place with python -> python3 symlink) which leads to the build failure of wireless-regdb, so this patch makes it explicit which python should be used. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Tested-by: Russell Senior <russell@personaltelco.net> Tested-by: Lucian Cristian <lucian.cristian@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b6bae4a2c9f11f7e55319c2b4c709396ce649688)
* wireless-regdb: fix patch fuzzKevin Darbyshire-Bryant2019-11-221-1/+1
| | | | | | | Refresh patches to tidy up some fuzz warnings Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 12840674d0550e6f5aa077cd2b578988f0c07074)
* wireless-regdb: fix Makefile indentationJohn Crispin2019-11-221-5/+5
| | | | | Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 8562e77953e76c1ec7ba01ce18dc468d5628f3dc)
* wireless-regdb: set PKGARCH:=allPetr Štetiar2019-11-221-0/+1
| | | | | | | | | As it's an architecture-independent binary file. Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053 Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 57d1c05ec945b4853708d686c0782c4b1dcff0a9)
* wireless-regdb: prefer python provided by make variablePetr Štetiar2019-11-221-1/+1
| | | | | | | Usage of predefined make variables is preferred. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3853d17a37a67541736b8b13f412a49ab382b9a)
* wireless-regdb: Make it build with python2Hauke Mehrtens2019-11-221-0/+58
| | | | | | | | | This backports a patch to build it work with python2 in addition to python3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d3a8a62692b06b3e5fe7077a2ce641fbf09cdc19)
* wireless-regdb: update to 2019.06.03Zachary Riedlshah2019-11-222-260/+8
| | | | | | | | | | | | | | | Fixes build issues on a python3 host (issues with the print statement formatting in the current build). Includes 100-regdb-write-firmware-file-format-version-code-20.patch and other fixes. Closes bugs.openwrt.org/index.php?do=details&task_id=1605. Uses the tarball as requested. Signed-off-by: Zachary Riedlshah <git@zacharyrs.me> (cherry picked from commit ef3f868da0d78adf2490a762ff567cf5b636c213)
* ar71xx: fix buttons for TP-Link TL-WDR4900 v2Adrian Schmutzler2019-11-211-2/+13
| | | | | | | | TP-Link TL-WDR4900 v2 only has one combined WPS/Reset button, so don't set up an RFKILL for this device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 25127f58b42d794bd47d56ea107f3dfc9cc4816c)
* ar71xx: fix LED setup for TL-WDR4900 v2Adrian Schmutzler2019-11-211-2/+36
| | | | | | | | | | | | | | | | | | In ar71xx there is only one combined mach file for Archer C5/C7 and TL-WDR4900 v2. This one uses the same LED struct for all devices, defining "green" LEDs for them. However, WDR4900 uses blue front LEDs, while only C5/C7 uses green ones. Despite, in base-files WDR4900 is actually set up with "blue" for the mentioned LEDs. Thus, this patch creates a separate LED struct for WDR4900, so the LEDs can be set up correctly. Despite, the wlan5g LED is removed as it is controlled by ath9k chip for WDR4900 (in contrast to C5/C7). Note: While front LEDs are blue, USB LEDs (on the back) are green, so colors are mixed intentionally for the WDR4900 v2. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 93f2bcc35e371ec0c4ceb76c06f90b898c726ba5)
* ramips: set uImage name of WeVO 11AC NAS and W2914NS v2Sungbo Eo2019-11-211-0/+2
| | | | | | | | | | | | | | | | The stock firmware and bootloader only accept uImage with names that match certain patterns. This patch enables OpenWrt installation from stock firmware without having to reflash the bootloader or access the UART console. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 19800ac095f6ddbba03ccab08e5197b1eec4a49e) [backported] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: fix MAC address setup for TL-WDR4900 v2Adrian Schmutzler2019-11-211-3/+6
| | | | | | | | | | | | | The MAC address setup of the TL-WDR4900 v2 is different from the C5/C7. This aligns ar71xx with the setup in ath79: wlan0 (5GHz) : -2 wlan1 (2.4GHz) : -1 eth1 (LAN) : 0 eth0 (WAN) : 1 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a9d3084b83bb2d0fa2c0b43bf2a0831b5ae1df13)
* ar71xx: fix MAC addresses for Archer C5 v1, C7 v1/v2, WDR4900 v2Adrian Schmutzler2019-11-212-3/+2
| | | | | | | | | | | | | | | | | | | | As discussed in 1d18a14a90c7 ("ath79: really fix TP-Link Archer C7 v2 MAC address"), stock firmware MAC address assignment is actually as follows: wlan0 (5GHz) : -1 wlan1 (2.4GHz) : 0 eth1 (LAN) : 0 eth0 (WAN) : 1 This has never been fixed for ar71xx, so let's do it now. Note that with WDR4900 v2 even both wlan0 and wlan1 where assigned to basemac-1 before ... Fixes: FS#408 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a021268032fb64afdce7bafa91c7c7bf44fa6ff2)
* ipq40xx: fix build errorKoen Vandeputte2019-11-201-11/+10
| | | | | | | Add missing brace which was accidentally omitted Fixes: 3c5c49af8be7 ("kernel: bump 4.14 to 4.14.154") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport upstream fixesKoen Vandeputte2019-11-193-0/+205
| | | | | | | This potentially fixes some issues seen on IBSS when interfaces go out of range and then re-appear. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* toolchain/gcc: bump to 7.5.0Koen Vandeputte2019-11-1924-3/+3
| | | | | | | This updates the GCC to the next minor release which fixes +213 bugs. Tested on ARMv6, ARMv7, MIPS R2, x86 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.154Koen Vandeputte2019-11-1928-158/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 902-debloat_proc.patch - 040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch - 807-usb-support-layerscape.patch - 809-flexcan-support-layerscape.patch - 816-pcie-support-layerscape.patch Remove upstreamed: - 303-spi-nor-enable-4B-opcodes-for-mx66l51235l.patch New symbols: X86_INTEL_MPX X86_INTEL_MEMORY_PROTECTION_KEYS CONFIG_X86_INTEL_TSX_MODE_OFF X86_INTEL_TSX_MODE_ON X86_INTEL_TSX_MODE_AUTO SGL_ALLOC Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: Adapt to changes to skb_get_hash_perturb()Hauke Mehrtens2019-11-181-0/+68
| | | | | | | | | | | The skb_get_hash_perturb() function now takes a siphash_key_t instead of an u32. This was changed in commit 55667441c84f ("net/flow_dissector: switch to siphash"). Use the correct type in the fq header file depending on the kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit eaa047179ad30d156d0c3da7ec225acfae7a9f00)
* mac80211: brcmfmac: fix PCIe reset crash and WARNINGRafał Miłecki2019-11-183-1/+85
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit cde8c2f2fba019c4cd3b9f6ad463ff86cc783061)
* ath79: fix sysupgrade from ar71xx for WNDR3700 V2 and WNDR3800(CH)Adrian Schmutzler2019-11-171-2/+2
| | | | | | | | | | | | ar71xx has just one board name "wndr3700" for WNDR3700 V1/V2, WNDR3800 and WNDR3800CH, whereas ath79 provides separate images for the boards. So, update SUPPORTED_DEVICES to store the correct ar71xx board names. Fixes: FS#2510 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit fc44a8481cbf317febaf27a550e0c9fa49be68d5)
* ath79: include rssileds package for ubnt devices with LEDsRoger Pueyo Centelles2019-11-171-3/+8
| | | | | | | | | | | | | | | | Some Ubiquiti devices had the RSSI LEDs configured in 01_leds but were missing the rssileds package, while others that don't have RSSI LEDS had the package included. This commit includes the rssileds package only for those devices that need it. Tested on a NanoStation M XW. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit 1c6066a867400eca9e335235ff4dc43acacc1183) [backported to 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: assign correct key-code to wps buttonsChristian Lamparter2019-11-172-2/+2
| | | | | | | | | | | | The two ASUS WL-330N and WL-330N3G had the reset keycode assigned to the WPS button. This patch changes all three devices to use KEY_WPS_BUTTON in the hopes that this fixes unwanted restarts/ unexpected behavior from the users point of view. [dropped RG21S] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit ad65d9d7b264d6d17293c59469e770905d2f785a)
* ath79: remap D-Link DIR-859 A1 WPS button to WPSChristian Lamparter2019-11-161-1/+1
| | | | | | | | | The WPS button was mapped to the restart/reset. This patch changes it to emit the KEY_WPS_BUTTON keycode so pressing the WPS button does initiate WPS. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 7a7610c21bb0979f2ae14f3c31012ac9e148b439)
* ramips: disable D-Link DIR-300 B1 by defaultJo-Philipp Wich2019-11-161-0/+1
| | | | | | | | Disable the DIR-300 B1 image by default as the device has insufficient flash space for release build images. Fixes: FS#2606 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: rt3833: fix build breakagePetr Štetiar2019-11-151-1/+1
| | | | | | | | | | | | Commit 60f41c6c9ef6 ("ramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100") added stray | during backport which caused build breakage on the buildbots: bash: -c: line 0: syntax error near unexpected token `|' bash: -c: line 0: `echo kmod-usb-core kmod-usb-ledtrig-usbport kmod-usb-ohci kmod-usb2 swconfig | | mkhash md5 | head -c 8' Fixes: 60f41c6c9ef6 ("ramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100Sungbo Eo2019-11-141-1/+2
| | | | | | | | | | CY-SWR1100 has a USB LED but kmod-usb-ledtrig-usbport is missing in default images. This commit adds it. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [changed commit title, backported to 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 261c746631d2bf311a6b62a6d3bacce6fde90976)
* ramips: fix MAC address setup for Samsung CY-SWR1100Sungbo Eo2019-11-141-3/+3
| | | | | | | | | | | | Ethernet MAC address setup has been broken since c3e420f28cf1. Restore original setting. Fixes: c3e420f28cf1 ("ramips: Add support for D-Link DCH-M225") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 7231c1edd99217c6baa8d7d5d841d75ad9de26f1) [backported due to base-files split] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: fix typo in fb-sys-fops autoloadSungbo Eo2019-11-141-1/+1
| | | | | | | | AutoLoad parameter must match the exact kernel module name. Fix it. Fixes: 125f1ce9ad0c ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 6990510aca41074351f92a5abc6f4afb4b606506)
* hostapd: add IEEE 802.11k supportKyle Copperfield2019-11-141-0/+13
| | | | | | | | | | | | Enables radio resource management to be reported by hostapd to clients. Ref: https://github.com/lede-project/source/pull/1430 Co-developed-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me> [removed the DMARC crap] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 87f9292300cf56ad17f44363ced213c59a95ef44)
* hostapd: Add mesh support for wpad fullHauke Mehrtens2019-11-141-2/+2
| | | | | | | | | | | | | | | This increases the size of the binary slightly: old: 427722 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431696 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk new: 442109 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 445997 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 49cc712b44c76e99bfb716c06700817692975e05)
* hostapd: use getrandom syscallHauke Mehrtens2019-11-147-7/+7
| | | | | | | | | hostapd will not use the getrandom() syscall and as a fallback use /dev/random, the syscall is supported since Linux 3.17 and in the musl, glibc and uclibc version used by OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 998686364da7d002ba9f6dbb43cc5f32294dd4ab)
* hostapd: Remove unneeded patchHauke Mehrtens2019-11-148-28/+14
| | | | | | | | All the content of this function is proceeded by IEEE8021X_EAPOL no code accesses the ssid variable outside of this ifdef. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 0d86bf518aaefa57bef577d09a18aff03eccb70c)
* hostapd: use config option CONFIG_NO_LINUX_PACKET_SOCKET_WARHauke Mehrtens2019-11-145-16/+4
| | | | | | | Instead of patching the workaround away, just use the config option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 9b4a27455c17c00698ce7ce24e0bcad419c6319e)
* hostapd: Update to version 2.9 (2019-08-08)Hauke Mehrtens2019-11-1447-639/+272
| | | | | | | | | | | | | | | | | | | The size of the ipkgs increase a bit (between 0.7% and 1.1%): old 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk new 2019-08-08 (2.9): 290217 wpad-basic_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 258745 wpad-mini_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 431732 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk 427641 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 167028b750028ae3dac24f5ff96bbb1ba04e8bd7)
* hostapd: Update to version 2.8 (2019-04-21)Hauke Mehrtens2019-11-1489-5673/+532
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also syncs the configuration files with the default configuration files, but no extra options are activated or deactivated. The mesh patches were partially merged into hostapd 2.8, the remaining patches were extracted from patchwork and are now applied by OpenWrt. The patches still have open questions which are not fixed by the author. They were taken from this page: https://patchwork.ozlabs.org/project/hostap/list/?series=62725&state=* The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch where first applied to hostapd, but later reverted in hostapd commit 3e949655ccc5 because they caused memory leaks. The size of the ipkgs increase a bit (between 1.3% and 2.3%): old 2018-12-02 (2.7): 283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk 415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk new 2019-04-21 (2.8): 288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk 256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk 427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk 423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> (cherry picked from commit 8af79550e6c280717660f66032d89d21007b15d2)
* hostapd: mirror ieee80211w ap mode defaults in station modeJo-Philipp Wich2019-11-142-1/+10
| | | | | | | | | | | | For AP mode, OpenWrt automatically sets ieee80211w to either 1 or 2, depending on whether the encryption is set to sae-mixed, or sae/owe/eap suite-b. Mirror the same defaults for client mode connections, in order to allow an OpenWrt station to associate to an OpenWrt ap with SAE, OWE or Suite-B encryption without the need to manually specify "option ieee80211w" on the station. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit abb4f4075e791789fdb00731035e08a8cf51555f)
* hostapd: fix OWE settings in client modeJo-Philipp Wich2019-11-142-1/+2
| | | | | | | | | This changes fixes the generation of the wpa_supplicant client configuration in WPA3 OWE client mode. Instead of incorrectly emitting key_mgmt=NONE, use the proper key_mgmt=OWE setting instead. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 4209b28d23b8bf28575af5e8904194f49b81532e)
* hostapd: declare struct wpa_bss earlyLeon M. George2019-11-141-0/+19
| | | | | | | | | | | | | | | | | wps_supplicant.h assumes that 'struct wpa_bss' is forward declared if CONFIG_WPS is not defined. With the later inclusion of 600-ubus_support, the issue manifests in warnings like these: wps_supplicant.h:113:15: warning: 'struct wpa_bss' declared inside parameter list will not be visible outside of this definition or declaration struct wpa_bss *bss) ^~~~~~~ This patch forward declares 'struct wpa_bss' regardless. Signed-off-by: Leon M. George <leon@georgemail.eu> [commit message facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit f974f8213b94578581b35e6b3f8fb1fd5a35f753)
* hostapd: revert signature change in patchLeon M. George2019-11-141-1/+1
| | | | | | | | | | | | | The original wpa_hexdump uses a 'void *' for the payload. With patch 410-limit_debug_messages, the signature changes and compiler warnings occur at various places. One such warning is: wpa_debug.h:106:20: note: expected 'const u8 * {aka const unsigned char *}' but argument is of type 'struct wpa_eapol_key *' Signed-off-by: Leon M. George <leon@georgemail.eu> [commit message facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit a123df275846b1b83aaf3d7488a1544f7c0e09aa)
* hostapd: adjust removed wolfssl optionsEneas U de Queiroz2019-11-141-4/+0
| | | | | | | | | | This edjusts the selection of recently removed wolfssl options which have always been built into the library even in their abscence. Also remove the selection of libwolfssl itself, allowing the library to be built as a module. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 94d131332b5adbcf885a92608c40a22b79b3c708)
* base-files: add /usr/share/libubox/jshn.sh to sysupgrade stage2Russell Senior2019-11-141-1/+1
| | | | | | | | Discovered recent changes had broken sysupgrade for ar71xx mikrotik rb-493g, traced the problem to missing /usr/share/libubox/jshn.sh after switching to tmpfs. Signed-off-by: Russell Senior <russell@personaltelco.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:22:11 +0000